Do we need to create the mx records if the send/receive the mail in the same organization?

1,May I know do we need to create the mx records if we send/receive the mail in the same organization?
2,If we send /receive the mail between two different organization/forest, we need to create the mx records ,is it right?
Please click the Mark as Answer button if a post solves your problem!
for 1. If you mean the same Exchange org, no.
For 2, it depends. You need a MX record for your receiving SMTP server ( At least, You *should* have one), but if sending to another org, not necessarily, as you could smarthost messages to it and a MX would not be required.
Just curious, what problem are you trying to solve?
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

Similar Messages

ADMT 3.2 Migrate users to the same organizational unit in the Target Domain as they are in the Source Domain?

Hi,
I am in the middle of a inter forest migration and have created the target domain (TargetDomain.local) 2008R2 and Source Domain (SourceDomain.Local) 2008R2 with a two way trust. I have installed ADMT 3.2 on a server in the Target Domain. I am able to migrate
users form the source domain to the target domain. I have copied the OU Structure from the source domain to the target domain. The issue I am currently facing is that I would like to find a way to migrate all users from the source domain to the target domain
and the users migrate to the same OU as the source. I have looked at the include file option but cannot find a way of specifying the source and target OU's.
Please could someone help me with this, Thanks.

Hi,
You need to create the same OU on target domain, then do the user account migration.
On Organizational Unit Selection page, select Browse and select target OU, then click OK.
For the more and detail information, please refer to this article:
http://social.technet.microsoft.com/wiki/contents/articles/16621.interforest-migration-with-admt-3-2-part-3.aspx#Group_Account_Migration
Regards.
Vivian Wang

Need to Create the STATUS Profile for Q-Info record

Hi Guys,
Basically in the Q-Info record we have status profiles like VN, SP, MP OM and MP NOM etc... Under this status profiles there are few staus profiles assigned to it, in the same way
I need to create the status profile for Q-Info record under the status profile MP NOM (Non Original Mfgr MP), so that when I am creating the Q-Info record I can select the status profile which is under the MP NOM.
Guys anyone can guide me to create the status profile in BS02.
Regards,
SM

BS02--->Select the status say " QM_P_001" ->Copy As F6 - >Enter new name>enter.
Now chage the relevent data as per your requirement.

Hi, we need to create the test environment from our production for oracle AP Imaging. we have soa,ipm,ucm and capture managed servers in our weblogic. can anyone tell me what is the best way to clone the environment, can I just tar the weblogic file syste

Hi, we need to create the test environment from our production for oracle AP Imaging. we have soa,ipm,ucm and capture managed servers in our weblogic..
Can anyone tell me what is the best way to cloning the application from different environment, the test and production are in different physical server.
Can I just tar the weblogic file system and untar it to the new server and make the necessary changes?
Can anyone share their experiences and how to with me?
Thank in advance.
Katherine

Hi Katherine,
yes and no . You need as well weblogic + soa files as the database schemas (soa_infra, mds...).
Please refer to the AMIS Blog: https://technology.amis.nl/2011/08/11/clone-your-oracle-fmw-soa-suite-11g/
HTH
Borys

How to create a cube/ods/infoobjects etc..and also why to create the same

Dear Friends
how to create a cube/ods/infoobjects etc..and also why to create the same objects.
thanks & Regards
Ramana

Hi Friend,
Creating Infoobjects
1. Go to RSA1 -> Modelling tab.
2. Click on Infobjects.
3. Create a new Infoarea.
4. Now create Infoobject Catalog for Characterstics and Key Figures.
5. Now create Char Infoobject under Char Catalog and Key figure Infoobject under Key Figure catalog.
Creating Cubes:
1. Right click the info area and choose create info cube.
2. Select the type of cube you wish to create and comnfirm your selections.
3. The next screen is where you actually define the cube.
4. Now you will notice the difference.
5. Place your cursur on key fig and right click and chose infio object direct input; chose your key fig for the cube.
6. Similarly for the dimension; right click the dimension and chose inbfo object direct input, chose your chars and out them in dimension.
7. Activate the cube.
Creating a ODS is also the same.(in step 1 choose create ODS)
Creating Multicube/Multiprovider
1. Right click the info area - chose create multi provider.
2. select the cubes , DSOs, info objects that you need for the multi provider.
3. On the right side of the screen, you will see all the objects that you selected and open the key fig and dimension and drag the ones you need to define the multi provider.
4. Identify the chars and key figs.
5. Acvitate the mullti provider.
Why we create them ?
Infobjects : They are fields in R/3. As we require fields in R/3 tables we require infoobjects in BI.
ODS : This actually is like a table in R/3.
Cube : This contain the Key figures.(e.g Sales quantity, Amount etc)
Hope it helps.
Regards
Hemant Khemani

I would like to create the same mouse over effect that is used on the home page of Industrial Light

I would like to create the same mouse over effect that is used on the home page of Industrial Light & Magic website. http://ilm.com
Could someone please let me know what the code or effect that is used. Thanks.

It appears there are two slideshows running in parallel where a mask that follows the mouse displays one of them. THe one you see in the moving mask is on top of the other.
If you were to search Google for a custom cursor tutorial you will probably end up with most of what you need for getting the mask to follow the mouse.

When transfering iTunes music from an older computer to a newer computer, do the versions need to be the same on both?

When transfering itunes music from my older computer to a newer computer, do both itunes need to be the same version?

No... the target machine needs to be running the same version or better.
These are two possible approaches that will normally work to move an existing library to a new computer.
Method 1
Backup the library with this User Tip.
Deauthorize the old computer if you no longer want to access protected content on it.
Restore the backup to your new computer using the same tool used to back it up.
Keep your backup up-to-date in future.
Method 2
Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
Both methods should give the new computer a working clone of the library that was on the old one. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase and reload.
I'd recommend method 1 since it establishes an ongoing backup for your library.
If you have an iOS device that syncs with contact & calendar data on your computer you should migrate this information too. If that isn't possible create a dummy entry of each type in your new profile and iTunes should offer to merge the existing data from the device into the computer, otherwise the danger is that it will wipe the information from the device.
If your media folder has been split out from the main iTunes folder you may need to do some preparatory work to make it easier to move. See make a split library portable.
Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device for advice on how to set up your devices with a new library with the maximum preservation of data.
tt2

Why do two iPods need to share the same library? Is there any way I can change it?

I owe one iPod and brought another today, and I just set up the other one. They're both the same model - iPod touch 8GB - and I've set the second one up. I've had the first one for some time, about an year, and I only bought another for a family member. I was wondering why do we need to share the same library and how can we change it. Help would be welcomed since we really like different kind of genres and we disagree on them, so we really really want to change this. I can't even say how much we need to change the setting. Thank you!

Sherlocked, There are a few ways you can solve that problem.
If you do want to share the same library, use the capabililty to "Sync Selected Playlists," so that each iPod will only get the music that its owner wants.
Alternatively, you can set up two separate libraries. This is easiest if you use two different Windows user IDs on the computer. Then each iPod owner can sync to his own library.

HT204053 how do i download a song on my iphone and it show up on my wifes phone using icloud do i need to have the same apple id on both phones icloud

how do i download a song on my iphone and it show up on my wifes phone using icloud do i need to have the same apple id on both phones icloud

Downloading (using iOS or computer) past purchases from the App Store, iBookstore, and iTunes Store - http://support.apple.com/kb/ht2519

Why do i need to buy the same app for each device over and over again??

why do i need to buy the same app for each device over and over again??
and why cant i just pay for the app ones for all devices as long at it is with the same account??
i hate that i have to oay for the same game or app three time one for ipad ones for iphone and ones for mac please do something about that apple..!!!

First, you posted in the Mac App Store forum which are apps for the Mac OS X, not iOS devices.
You do not need to re purchase your apps. Connect your iOS devices to your computer, launch iTunes. From the menu bar click Apps then click Sync
Downloading past purchases from the App Store, iBookstore, and iTunes Store

I've reset my PPAM before to get around Firmware lock, but I've upgraded to mountain lion and now need to do the same thing, but I can't reset the PRAM. I've heard of the chip that is on the post 2011 macs, but I must not have one? What to do?

I've reset my PPAM before to get around Firmware lock, but I've upgraded to mountain lion and now need to do the same thing, but I can't reset the PRAM. I've heard of the chip that is on the post 2011 macs, but I must not have one? What to do? Also, I can not get start up chimes unless I have the factory startup disk in. Can the PRAM be reset with the factory startup disk in or must the mac boot from the hard drive? Need help.

Help for forgotten passcode > iOS: Forgotten passcode or device disabled after entering wrong passcode
When you have access to your iPhone again, FaceTime is a pre installed app that cannot be removed.
Try a search > iOS: Understanding Spotlight Search

I want to perform bidirectional i/o using a pci-6534.The problem is that i need to use the same lines for i/p and o/p. is that possible?

I want to perform bidirectional i/o using a pci-6534.The problem is that i need to use the same lines for i/p and o/p. is that possible? And if it is how an i doing this?

Hi I Pant,
The idea that crossed my mind was to tie each of the lines coming from/going to "your device" to two of the DIO lines. Configure one these two ports as input, the other as output.
When you want to read the state of the line, read from the line configured as input. Similarly, use the other port when it is time to write.
Provided "your device" uses tri-state drivers/receivers, or can be used in a "wired-OR" configuration, this may work.
What is "your device"?
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Migrate Active Directory 2008 to 2012 but need to keep the same ip address and server name

Hi,
Current setup is 2 DCs in one site running 2008 R2 AD.
We are planning to migrate from 2008 R2 to 2012 R2 but need to keep the same ip address and server name. I have came up two plans to do this and hope someone can tell me which one would be the best approach. What is the pros
and cons in Plan A and B or may be plan C if there is a better one?
First, I was planning to do plan A but just had a second thought of Plan B. My concern in Plan A is about changing the server name when the new 2012 R2 already running as DC. Plan B would be changing all the old server
name and ip before they become member sever and DC.
Any information and suggestion would be very appreciated.
Plan A
Run adprep /forestprep on 2008 R2 DC
Build a new 2012 R2 server and promote it as 3rd DCs in current Domain
Transfer FSMO from 2008 R2 to 2012 R2
Run Repadmin /syncall to force replication
Rename the demoted 2008 R2 DC to something else
Change the demoted 2008 R2 ip address to something else
Restart the demoted 2008 R2 server to take effect
Now, run Netdom computername command to change the new 2012 R2 server name to the old 2008 R2 DC server name
Change the new 2012 R2 DC's ip to old 2008 R2 DC's ip
Run ipconfig /flushdns
Run ipconfig /registerdns
DCDIAG to see any error
Plan B
Build 2 new 2012 R2 standalone servers
In 2008 R2 ServerA transfer FSMO to 2008 R2 ServerB
Demote 2008 R2 ServerA to become member server
Rename 2008 R2 ServerA to something else and change the ip address to something else and shut it down
Now, rename one of the new 2012 R2 standalone server to the old demoted 2008 R2 ServerA name
Change the new 2012 R2 standalone server ip to the old demoted 2008 R2 ServerA's ip address
Add the new 2012 R2 standalone server (now with the old 2008 R2 ServerA name and ip) to become member server
Run adprep /forestprep on the 2008 R2 ServerB
Promote the new 2012 R2 (now with the old 2008 R2 ServerA name and ip) as DC
Transfer 2008 R2 ServerB FSMO to the new 2012 R2 DC (now with the old 2008 R2 ServerA name and ip)
Demote 2008 R2 ServerB as member server
Rename 2008 R2 ServerB to something else and change the ip address to something else and shut it down
Now, rename the 2nd new 2012 R2 standalone server to the old demoted 2008 R2 ServerB name
Change the new 2012 R2 standalone server ip to the old demoted 2008 R2 SeverB 's ip address
Add the 2nd new 2012 R2 standalone server to become member server
Promote it as DC
Run DCDIAG to check error
Thanks.

Hi,
Renaming a Domain Controller is a risky operation which may lead to issues, therefore, I would suggest you go with the Plan B, rename the server before it becomes DC.
Here is a blog below which could be helpful to you:
Remove an Old DC and Introduce a New DC with the Same Name and IP Address
http://blogs.msmvps.com/acefekay/2010/10/09/remove-an-old-dc-and-introduce-a-new-dc-with-the-same-name-and-ip-address/
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]

I need to Mirror the same content of iPad on multiple Apple TV simultaneously, can it be done

I need to Mirror the same content of iPad on multiple Apple TV simultaneously.
I have a iPad and three Apple TV in three different rooms, and I would like to play the same video or mirror simultaneously on all the Apple TV located in my three rooms. Is that possible?
I would also like to know is it possible to have two iPad mirrored on to a single apple tv, so that I can view both my iPad screen on same apple TV simultaneously.
Any suggestions?

doubt it most local area networks would die having to stream such amount of data

"Thumbnail" image need to be the same image as the "Hero Image?"

When using the slide show widget does the "Thumbnail" image need to be the same image as the "Hero Image?"
I would like to keep my "Hero Image" I load into the widget, but would like to change its corresponding "Thumbnail" image to a different icon. Is it possible to use live type in MUSE as the icon and put it over the "Hero Image?" Thanks for the help!
-t

Thank you very much for the help. This works great! As I'm diving in deeper and messing with the Composition Widget I had few more questions...
I have figure out how to put in a different image into the thumbnail, but how do I replace it with a text box instead of an image. I would like to use websafe fonts as the thumbnail that triggers the Hero picture. Is this possible?
I attached an quick 3 frame storyboard as reference to show you what I am trying to do.
Thanks in advance!
-t

Do we need to create the mx records if the send/receive the mail in the same organization?

Similar Messages

Maybe you are looking for