Do we need to create two zones for Two HBA for a host connected with SAN ?

Hi,While creating Zone , Do we need to create two zones for Two HBA for a host connected with SAN ? Or a zone is enough for
a host which having Two HBAs...We have two 9124s for our SAN fabric...
As I found like one zone below, I little bit confused that , if a host having two HBA connected with SAN, should I expect two zones for every Host?
from the zone set, I gave the command show zoneset
zone name SQLSVR-X-NNN_CX4 vsan 1
    pwwn 50:06:NN:NN:NN:NN:NN:NN
    pwwn 50:06:NN:NN:NN:NN:NN:NN
          pwwn 10:00:NN:NN:NN:NN:NN:NN
But I found only one zone for the server's HBA2:by the same time in the fabric I found switches A & B showing the WWNs of those HBAs on its
connected N port...Its not only for this server alone, but for all hosts..Can you help me to clarify on this please..that should we need to create one zone for
one HBA?

if u have two independent fabrics between hosts and storage, i think the below confs are recommended.
Scenario 1: 2 HBAs single port each ( redundancy across HBA / Storage port )
HBA1 - port 0 ---------> Fabric A ----------> Storage port ( FAx/CLx )
HBA2 - port 0 ---------> Fabirc B ----------> Storage port ( FAy/CLy )
Scenario 2: 2 HBAs of dual port each
HBA1 - port 0 -------> Fabric A ---------> Storage port ( FAx/CLx )
HBA2 - port0 ---------> Fabric A ---------> Storage port ( FAs/CLs )
HBA1 - port 1 --------> Fabric A --------> Storage port ( FAy/CLy )
HBA2 - port 1 ---------> Fabric B --------> Storage port ( FAt/CLt )
the zone which is in your output is VSAN 1. if its a production VSAN, Cisco doesn't recomends to use VSAN 1 ( default vsan ) for production.

Similar Messages

Need to create a Store Business document type for material master and store a sharepoint link

Hello,
I need to create a Store business document type for material master and store a URL link . How do I do that?( or is there any functionality to upload a document for a store business document that it will automatically saves to sharepoint?)
Thanks,
Ran.

>
dhayes12 wrote:
> A) When I do the (Material Backflush) MFBF for the 04 type, the Inspection Lot gets created OK. I then can go into QA32 and assign the correct Inspection Plat by clicking the Inspection Lot button.
>
> B) When I do the MIGO via the Purchase Order (type Z01), it will not create the Lot if I have the Multiple Specs selected in the QM Material Master MM02. If, I turn off the Multiple Specs in the QM Material Master and create a new PO and MIGO, it will create the Lot, however, it automatically assigns the lot to the wrong Inspection Plan (2nd Plan see above) I need to be able to select the plan like I can with the 04 type.
>
> Is their some setting that can be changed in Config or somewhere that acts the same way as example A above?
For case A, create insp plan with usage "1- production" If you have one IP with this usage for given material then system will assign Plan to lot automatically. In your case for second plan update usage as 1.
For case B, system should assign 1st plan make sure for both plan udage is correct. for 1st plan usage should be 5 while 2nd plan usage should be 1. Now if your 1st have status 4 and key date before lot date then system will assign plan auto.
Thanks!!!

I have 2 iPhones - one for personal use and one for work. They are currently connected with the same Apple ID. I would like to separate the two accounts. Does anybody know how to do this?

I have 2 iPhones - one for personal use and one for work. They are currently connected with the same Apple ID. I would like to separate the two accounts. Does anybody know how to do this?

Just create a new AppleID for your work.
As Allan suggested, items purchased on one iTunes account cannot be moved to the other account.
However, you can put items purchased on on account onto the other iPhone.

I need to create 4 A2 boards that print adjacent to one another with a photo image running across all 4 boards.How do I set up the pages so I can see the whole composition together , then print the seperate A2 boards.Do I use illustrator (C3) or Indesign?

I need to create 4 @ A2 boards that print adjacent to one another (all landscape format) with a photo image running across all 4 boards.How do I set up the pages so I can see the whole composition together , then print the seperate A2 boards? Is it best to use Illustrator(CS3) or Indesign?
Thanks.

Re: I need to create 4 A2 boards that print adjacent to one another with a photo image running across all 4 boards.How do I set up the pages so I can see the whole composition together , then print the seperate A2 boards.Do I use illustrator (C3) or Indesign
If possible, please try Indesign CS 4.

I just got a new iphone 4 for att and my friend installed the sim card in it for me. the imessage function isnt connecting with the my cell number. a while back i had logged into my apple account on someone elses cell phone and their number keeps showing.

i just got a new iphone 4 for att and my friend installed the sim card in it for me. the imessage function isnt connecting with the my cell number. a while back i had logged into my apple account on someone elses cell phone and their number keeps showing. when i try to just select my number to send and recieve imessages from it will not show up. i can send and recieve regular text but not pictures or imessage. i have tried logging off and restarting and nothing has worked.help please!!

Did you remove your account information from the other person's iPhone?

How many DNS record need to create in Internal & external DNS server for exchange?

Hi friends,
I recently installed Exchange Server 2010 in my organization for testing purpose and I've register a pubic ip too for exchange server on godaddy.com. How many
internal & External DNS records reqired to configure on external & Internal dns server so my all feature like Auto-discover, Activ -sync,& webmail start working perfectly.
It's my first time configuring exchange for a organization.
Thanks & Regards,
Pradeep Chaugule

Hi,
Just as what ManU Philip said, you need to create
Autodiscovery.domaincom and mail.domain.com for external dns server.
Generally, you configure your Exchange Servers as DNS clients of your internal DNS server.
Refer from:
http://technet.microsoft.com/en-us/library/aa996996(v=exchg.65).aspx
Best Regards.

Need to Create a Last 12 Months Variable for Custom Dimension

Hi everybody
Once again, I need your good help for an issue I'm facing. In one of our Cube, we have some Date Dimension sthat we've created ourselves (a ZCXXXXX dimension). For one Dimension, Ii need to create a variable that is giving me, automaticaly, the Last 12 Months excluding Current Month (same as the 0CML12LM provided by SAP) without any manual entry done by the user via the Variable Entry Screen.
I don't want to use offset because I don't want to allow any Manual intervention for my users because it is a report start via RRI.
Please let me know if you are aware on how to do this!
Thanks
Eric L.

Hi Arun
My problem is that my report is counting Incident per supplier per Month. We have a Key Figure that is doing the Total of incident with a Vendor Variable. So, for a given supplier, if there is no incident for the Incident Month, it won't display in the Result Page. Also, My report is dynamic so I'can not fix a Structure. On the other hand, I never used Strucutre, so I'm not really aware on how using this and if it will answer my need.
If you can give me more details, maybe I'll be able if a Structure is my solution.
Regards
Eric L.

Do we need to create or actiovate any system objects for ess mss applicatio

Hi
I am new to ESS MSS business packages.i know we need to activate 5 pairs of JCO destinations,
do we need to create or activate any system objects ,because ess mss applications contains transactional iviews also
how they will communicate.

once you placed the portal content, the default system objetcs for ESS and MSS are delivered by SAP only, we need to configure the same like JCO destinations.,

Need to create and adjustment layer to compensate for undesirable hue caused by lens

I’m looking for some help to set up an adjustment layer to compensate for a specific lens colouration issue. Basically I’m using a GoPro (on a drone) but I have fitted an aftermarket flat lens. Sharpness is good, but the lens has a well known issue – it results in pink hue around the edges/corners. Most of the time it is barely noticeable, other times it jumps out. It also depends on the monitor I am using eg. my TV seems to bring it out a lot more than my laptop.
Here is an example - look around 0:35 to 0:40 http://vimeo.com/117790732
And to try get an idea of where the issue is on the frame, I picked an example image of frost covered grass, very early in the morning. I then cranked up the saturation to 100% and this is what it looks like:
I would like to be able to compensate for this. Presumably this should done with an adjustment layer made in Photoshop which I can then import into Premier Pro. Can anyone advise as to how I do that?
Any help will be appreciated.
Thanks,
Jacques

Hi Trevor
Thanks for your reply. I did what you suggested and created 2 masked adjustment layers which are basically concentric rings with differing levels of magenta reduction and I then feathered the edges. I have attached 2 images below to show the before and after effect. I’m working on getting this more accurate and I’m also going to look into the technique posted by Normfb. Big thanks to you Trevor for suggesting this – this is all quite new to me and it was very useful to play around with these adjustments layers, masks etc.
Jacques

What do I need to buy in order for my iPod Classic 160GB to connect with my blue tooth speaker

What do I need to buy in order for my IPod Classic 160 GB to connect with my blue tooth Ultimate Ears Boom speaker?

Upgrading RAM and your HD will give you some performance gains, but depending on what you are doing, it may not be enough. Your best friend will always be processor speed. This has a direct relation to how many cores and the speed of the RAM.
However, if you are unable to spring for a new computer, then the options of running more RAM and a biggger, faster HD should ruduce some bottle necks.
Here is a site where you can check out what your computer can handle http://eshop.macsales.com/shop/memory/Apple_MacBook_MacBook_Pro/Upgrade They have some charts comparing speed gains with various components.
Are you using the track freeze option to manage the track count and subsequent demands on your machine?

A pop-up window advising of software update for Firefox appears and does not connect with server

The window suggests strongly that I update software but when I attempt to update it does nothing but try to connect with server and never does

* http://kb.mozillazine.org/Software_Update (Software Update not working properly)
Remove the files in the updates and updates\0 folder.
You may need to delete active-update.xml and updates.xml as well if present.<br />
XP:
C:\Documents and Settings\<user>\Local Settings\Application Data\Mozilla\Firefox\Mozilla Firefox\updates
(%USERPROFILE%\Local Settings\Application Data\Mozilla\Firefox\Mozilla Firefox)
If you have problems with updating then best is to download the full version and uninstall the currently installed version.
You may need to remove the Firefox program folder to do a clean install of the new version.
Do a clean (re-)install:
Download a fresh Firefox copy and save the file to the desktop.
* Firefox 4.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Do not remove personal data if you uninstall the current version.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.

Need to create a report to show values for a particular date range

I have to create a report, out of which I need two columns : << Customer Value Variance and Churn Score Variance >> to show values only for a custom date range, which will be entered via a dashboard prompt.
These generic date columns are not present and cannot be added. I have to make use of Pres variables
What I have currently done is:
1) Created a prompt with 2 different date columns and passing those values into variables vStartDate and vEndDate. (I don't actually need those 2 column which I have selelcted, but I have taken those so that I can prompt the values in calendar format and pass onto the variables)
2) Created report with necessary columns, with 2 extra columns (hidden) as vStart Date Column and vEnd Date Column which take the values from the presentation variables defined in the prompt. I have created these columns as then I can reference these in the two required columns if necessary.
I am already facing error in report after doing this and I am confused how to proceed. Any suggestions?
Thanks.

Yes, but it only has one generic Date column, no start date and end date. I can't use that twice in the prompt. Although I can specify it to be 'between', but I'm not sure I can pass values to both variables like that.
Currently I have used Campaign Start Date and Campaign End Date to enter values in calender format to the variables.

Do we need to create a new EP in DAC for a new Action

Hi,
We have set an Action for a Task in DAC. Is it mandatory to create a new Execution Plan for this action to get reflected while the task is running.
Thank you,
Vinay

If you would like to create sub-directories on the server, you can simply use a FTP program and create new directories manually.
Muse creates /css/, /images/ and /scripts/ folders by default that it uses to store files required for the site to function properly. In addition to these, it would create an /assets/ folder if you are uploading your own static files and /phone/ and /tablet/ too if you have enabled the mobile layouts.
If you would like to host your site to a sub-directory instead of the root, you can define a Host directory within the Publish options (for BC) or the FTP upload dialog box (for non-BC hosted sites).
Thanks,
Vinayak

Need to Create a Wall Barrier and Detection for Maze Game

Hi, I have a basic maze that I created the artwork in Photoshop and brought it into Flash as a PNG file. My trouble is that my car object is going through the wall. Could someone help me on correcting this. I've been trying for hours to fix this but was unsuccessful. I'm hoping someone out there has some advice on how to get it to work. Thanks in advance.
Iz

Hi - I put in the codes for the upPressed (to test it) and these are the errors that came up.
Scene 1, Layer 'Actions', Frame 1, Line 110
1120: Access of undefined property speed.
Scene 1, Layer 'Actions', Frame 1, Line 110
1120: Access of undefined property i.
Scene 1, Layer 'Actions', Frame 1, Line 110
1120: Access of undefined property i.
Scene 1, Layer 'Actions', Frame 1, Line 114
1120: Access of undefined property wallhitBool.
Scene 1, Layer 'Actions', Frame 1, Line 112
1120: Access of undefined property i.
Scene 1, Layer 'Actions', Frame 1, Line 110
1120: Access of undefined property i.
Here is the updated program:
import flash.events.KeyboardEvent;
stop();
/* Move with Keyboard Arrows
Allows the specified symbol instance to be moved with the keyboard arrows.
Instructions:
1. To increase or decrease the amount of movement, replace the number 5 below with the number of pixels you want the symbol instance to move with each key press.
Note the number 5 appears four times in the code below.
wallDet1_mc.enabled= false;
wallDet2_mc.enabled= false;
wallDet3_mc.enabled= false;
wallDet4_mc.enabled= false;
wallDet5_mc.enabled= false;
wallDet6_mc.enabled= false;
wallDet7_mc.enabled= false;
wallDet8_mc.enabled= false;
wallDet9_mc.enabled= false;
wallDet10_mc.enabled= false;
var upPressed:Boolean = false;
var downPressed:Boolean = false;
var leftPressed:Boolean = false;
var rightPressed:Boolean = false;
carP_mc.addEventListener(Event.ENTER_FRAME, fl_MoveInDirectionOfKey_3);
stage.addEventListener(KeyboardEvent.KEY_DOWN, fl_SetKeyPressed_3);
stage.addEventListener(KeyboardEvent.KEY_UP, fl_UnsetKeyPressed_3);
stage.addEventListener(Event.ENTER_FRAME, everyFrame);
function fl_MoveInDirectionOfKey_3(event:Event)
    if (upPressed)
        carP_mc.y -= 5;
    if (downPressed)
        carP_mc.y += 5;
    if (leftPressed)
        carP_mc.x -= 5;
    if (rightPressed)
        carP_mc.x += 5;
function fl_SetKeyPressed_3(event:KeyboardEvent):void
    switch (event.keyCode)
        case Keyboard.UP:
            upPressed = true;
            break;
        case Keyboard.DOWN:
            downPressed = true;
            break;
        case Keyboard.LEFT:
            leftPressed = true;
            break;
        case Keyboard.RIGHT:
            rightPressed = true;
            break;
function fl_UnsetKeyPressed_3(event:KeyboardEvent):void
    switch (event.keyCode)
        case Keyboard.UP:
            upPressed = false;
            break;
        case Keyboard.DOWN:
            downPressed = false;
            break;
        case Keyboard.LEFT:
            leftPressed = false;
            break;
        case Keyboard.RIGHT:
            rightPressed = false;
            break;
function everyFrame(event:Event):void {
var mazehit:Boolean = false;
if (upPressed) {
mazehit=false
for(i = 0; i < speed; i++) {
if(carP_mc.hitTestObject(this["wallDet"+i+"_mc"])){
wallhitBool=true;
break;
if(mazehit){
carP_mc.x -= 5;
if (downPressed) {
//for(var i:int = 0; i < speed; i++) {
if(carP_mc.hitTestObject(wallDet1_mc))
if(carP_mc.hitTestObject(wallDet2_mc))
if(carP_mc.hitTestObject(wallDet3_mc))
if(carP_mc.hitTestObject(wallDet4_mc))
if(carP_mc.hitTestObject(wallDet5_mc))
if(carP_mc.hitTestObject(wallDet6_mc))
if(carP_mc.hitTestObject(wallDet7_mc))
if(carP_mc.hitTestObject(wallDet8_mc))
if(carP_mc.hitTestObject(wallDet9_mc))
if(carP_mc.hitTestObject(wallDet10_mc))
carP_mc.y -= 5;
mazehit = true;
//break;
if (leftPressed) {
//for(var i:int = 0; i < speed; i++) {
if(carP_mc.hitTestObject(wallDet1_mc))
if(carP_mc.hitTestObject(wallDet2_mc))
if(carP_mc.hitTestObject(wallDet3_mc))
if(carP_mc.hitTestObject(wallDet4_mc))
if(carP_mc.hitTestObject(wallDet5_mc))
if(carP_mc.hitTestObject(wallDet6_mc))
if(carP_mc.hitTestObject(wallDet7_mc))
if(carP_mc.hitTestObject(wallDet8_mc))
if(carP_mc.hitTestObject(wallDet9_mc))
if(carP_mc.hitTestObject(wallDet10_mc)) {
carP_mc.x += 5;
mazehit = true;
//break;
if (rightPressed) {
//for(var i:int = 0; i < speed; i++) {
if(carP_mc.hitTestObject(wallDet1_mc))
if(carP_mc.hitTestObject(wallDet2_mc))
if(carP_mc.hitTestObject(wallDet3_mc))
if(carP_mc.hitTestObject(wallDet4_mc))
if(carP_mc.hitTestObject(wallDet5_mc))
if(carP_mc.hitTestObject(wallDet6_mc))
if(carP_mc.hitTestObject(wallDet7_mc))
if(carP_mc.hitTestObject(wallDet8_mc))
if(carP_mc.hitTestObject(wallDet9_mc))
if(carP_mc.hitTestObject(wallDet10_mc))
carP_mc.x -= 5;
mazehit = true;
//break;
/**onClipEvent(enterFrame){
    if(this.hitArea(carP_mc._x,carP_mc._y, true)){
        carP_mc._x=carP_mc._x;
        carP_mc._y=carP_mc._y;
//Keyboard Listener on stage
//stage.addEventListener(KeyboardEvent.KEY_DOWN, theKeysDown);
//stage.addEventListener(KeyboardEvent.KEY_UP, theKeysUp);
//Makes MazeArt follow the movement of the path_mc
/*addEventListener(Event.ENTER_FRAME, onNewFrame01);
function onNewFrame01(e:Event):void{
    maze_mc.x=wallDet1_mc.x;
    maze_mc.y=wallDet1_mc.y
function Car_P(e:KeyboardEvent):void
    //maze_mc.addEventListener(KeyboardEvent, wallDet1_mc);
    //wallDet1_mc.addEventListener(KeyboardEvent.KEY_DOWN, maze_mc);

TS1369 i have just registered my new ipod but it doesnt appear in the menu for me to update it with the new music but it has put music into my old ipod....do i need to create a new apple i.d for my new ipod and create a second itunes app??

Hi,
O already have a really old ipod and just had a new one which i have registed today but when i have downloaded the itunes app onto my new laptop i cannot see the new ipod in the menu to update the music i have just purchsed.
Furthermore it seems to have put the new album into my old itunes so once i connect my old ipod i assume it will want to put it on there. I bought a new one as my old ipod is only 4gb and there is no space on it.
Can someone help please?

Registering an iPod or any other iDevice for warranty and support has nothing to do with the device appearing in iTunes. For what silly reason would you expect that to occur????
Honestly, it sounds like you have no clue how to use iTunes or sync media to the devices. Might be a good idea to read the User's Guide for the iPod to understand how to use it.
http://manuals.info.apple.com/en/ipod_touch_user_guide.pdf

Do we need to create two zones for Two HBA for a host connected with SAN ?

Similar Messages

Maybe you are looking for