Do we need to replicate storage locations in SRM from R/3?

Hi Experts,
Can anyone tell me do we need to replicate storage locations in SRM from R/3 system .
If so what will be the table for this entries to be checked in SRM whether replicated or  not?
Suppose if we replicate the plants from R/3 we have table to check bbp_locmap
where we can find out plant with its BP number if replicated.
Please guide me
Regards
sairam.

Hi Dinesh
Thanks for your reply.
So there wont be any table for this storage locations right?
same like BBP_LOCMAP for plant .
One more doubt how does a SRM search help in the extended attributes tab can show this storage locations list available in R/3 system
Regards
Sairam.
Edited by: Sai Ram on Jul 17, 2008 7:57 AM

Similar Messages

  • Replicate storage location to srm

    Hi,
    we are using srm 3.0 with ebp 4.0.
    We have created new storage location in the R/3 system and replicated them to  SRM system.
    When i try to add the new stroage location in the org structure for a a user in extended attributes it doesnot get updated.
    I select the source system as R/3, doing a F4 search on the Sloc field shows the new storage location and desc  for it. but when i add it and click on save button the storage location is shown added but  the desc is not there , I cant find the storage location when i am trying to shop.
    Thanks
    R.M.

    hi
    did you pull the plant first with associated with sl.
    first the plant must pull in to dtm bbp_locmap  table.
    Storage location replication problem
    note 1175255 in our R/3.
    br
    muthu

  • Need to exclude storage location from MRP.

    Hi Gurus,
    Is there an option to exclude a specified storage location from MRP at configuration level. But not at material level as in MRP4 view.
    We have excluded the stoarge location in config OMIR, however the system considers that stock if the same is not excluded in MRP4 of that material.
    Now, the problem is every time i need to go to the material master of every material  i have to excude from MRP, which is very time consuming..!
    Please advise me is there any option in point of view of Storage Location,  just simply  define the storage location to be excluded from MRP run.
    Thanks in advance.
    Naveen.

    Dear,
    Yes you can do it though OMIR or MMSC 1-Storage location stock excluded from MRP.
    Also check this link for more details,
    Exclude purchase order on storage location from MRP
    Regards,
    R.Brahmankar
    Edited by: R Brahmankar on May 25, 2009 12:22 PM

  • Need to change Storage location for reservations in production order

    During Production order creation we need to assign storage location against all the reservations in production order. Is there a way it can be done??

    Hi,
          check the user exit EXIT_SAPLCOSD_001.
    Sudheer.A

  • Need to restrict storage locations

    Hi Experts,
    I need to restrict the four storage locations to all my end users exceprt one user id in production server.
    Please let me knoe how can i restrict these storage locations to all user ids.
    Regards,
    Reddy V

    Hi Olivier,
    Production server ECC6.0.
    As per our MM consultant requirement I have to restrict the storage location 1025 to the one new user id.
    For this I Have created a role for the T-codes mb1a and mb1b (as per MM Consultant requirement), and assigned this role to new user id. But this role not maintaining the authorization object M_MSEG_LGO to restrict the storage location(1025).
    After that I have manually added the authorization object M_MSEG_LGO in this role and added the required storage locations and removed/restricted the 1025 storage location.But using this t-codes the user is able to post the material to this storage location 1025.
    At the same time there is no other roles/profiles are assigned to this user id.
    So , Please let me know how can i restrict this storage location to this user id.
    Regards,
    Reddy V

  • Need to Block storage location through physical inventory process

    Hello My client want to Block few storage locations not through authorisation objects but using physical inventory process.
    can this be achieved through any configuration settings so that when we run physical count the SLoc blocks till the count completes & posted.or Any other method to block Sloc.
    Please guide me on this.

    Hi,
    You can use check box of "Posting block" in physical inventory document.  Posting block indicates that no goods movements involving the materials listed in the physical inventory document can be posted for the duration of a physical inventory count.The  indicator is set for the affected stocks in each case for all associated stock types and is not cancelled until the count results are posted.The blocking indicator can be set in one of two ways:                                                                               
    A.Directly upon entry of the physical inventory document (if the count is to take place immediately)         
    B.Shortly before the count (if the count is to take place later)
    Regards,
    Biju K
    Moderator message:
    Warning.
    You copy-pasted someone else's work as your own message. Please don't do it in the future.
    http://www.dfa.arkansas.gov/offices/informationServices/aasis/MM/Documents/InventoryPlanningandMonitoringManual.pdf
    Edited by: Csaba Szommer on Oct 27, 2011 8:33 PM

  • Storage Location in SRM

    Hello,
    We are on SRM5.0 and I want to know where the storage locations are stored in SRM and the storage location address.
    Thanks!

    Hi Antoinette,
    The Storage locations get replicated to SRM system when their respective plants get replicated.
    They get replicated to SRM system from ECC system using a programme - BBP_LOCATIONS_GET_ALL or  BBP_LOCATIONS_GET_SELECTED or BBP_LOCATIONS_GET_FROM_SYSTEM.
    The same can be seen under Extended attributes in the SRM organization structure under locations and the Storage locations will get replicated under Storage locations tab of Extended Attributes.
    You can check and maintain the same from the search help.
    You can check all the Plants replicated to SRM system in BBP_LOCMAP table.
    If all the plants get replicated successfully then all the storage locations assigned to that plant will get automatically replicated to SRM system.
    Please let us know in case of any further clarifications.
    Regards,
    Teja

  • Needed config settings for automatic storage location

    hi,
    sap gurus,
    configuration settings needed for automatic storage location at sales order level.
    it is coming by using OVL3 at delivery document level.
    but we need it sales order level.
    regards,
    balaji.t

    Hi Balaji,
    In standard Storage location cannot be defaulted in Sales order. OVL3 is for determining the storage location in Delivery.
    However to map your requirement of having Storage location determination in the Sales order do the following:
    In the Plant Setting IMG> Enterprise Structure> Definition> Logistics - General> Define, copy, delete, check plant. Here select your plant and go to Address for this plant. Here in Search term 2 Maintain some alphabet say "A". Now ask your ABAPer to write a user exit for determining the Storage location if the Sales order has the same Plant used in it with search term as "A" then use table V_TVKOL (storage location determination table) and fetch the correct storage location based on Shipping Point + Plant + Storage conditions.
    Hope the same works for you!!
    Regards,
    Ajinkya

  • Stock valuation down to Storage location level

    Dear all,
    System setup for stock valuation is till Plant level. And understand that's how data stored in table MBEW and MBEWH until plant level only.
    Eventhough that is system standrd, is that possible to get the stock valuation until Storage location level?
    For eg: In MB5B, there is opening stock, closing stock and the material movement posting. I need to get opening and closing stock for each storage location.
    Could you please comment if there are tables store these data? Kindly comment.

    Hi Afshad Irani,
    Thanks for your reply. Understand from the previous post that stock valuation for storage location can be done via table MARDH or report MC.9, but this tools are excess base on period/month basis.
    My case, i need to report storage location stock for both (1)last month 06.2010 and (2)yesterday's stock 06.07.2010. So i can use MARDH table to report (1)last month stock for each storage location. While for (2) yesterday stock, table MARDH isn't help.
    Could you please advice further?

  • ATP at storage location level

    Hi Gurus,
    Can anyone help me how to check ATP at storage location level in the plant in Order and delivery processing.
    I have seen configuration that ATP will happne at the plant level.
    Venkat

    Hi,
      Availability Check at Storage Location Level
    Example:
    Plant stock (1000 pieces) is made up of the stock from storage location 1 (800 pieces) and the stock from storage location 2 (200 pieces). Requirement 2 in amounting to 500 pieces is to be withdrawn from storage location 1. This storage location currently contains 800 pieces. However, requirement 2 cannot be completely confirmed at plant level as only 300 pieces are available. Therefore only 300 pieces are confirmed for requirement 2. If the system confirmed the full requirement quantity, the availability of the confirmed issue 1, for which the issue storage location has not been specified and which draws on plant stock, would be jeopardized as it would be short of 200 pieces.
    If the storage location is excluded from planning or if it is planned separately, then there is no longer the need for an additional check at plant level since stock from this storage location is not contained in plant stock.
    If a storage location is excluded from planning or if it is planned separately, the check cannot be activated without a storage location (see Scope of the Availability Check).
    http://help.sap.com/saphelp_46c/helpdata/en/f4/7d3f9344af11d182b40000e829fbfe/frameset.htm
    Regards,
    nandha

  • MRP run without one storage location

    Dear All,
    My client's requirement is they need to run MRP on plant level without considering one storage location stock
    e.g if a material is having stock of 10 in unrestricted with storage location 1104. Now when mrp is run for 100 quantity planned order is created for 90 only planning strategy is 40....they want the MRP should not consider the stock in storage location 1104.....how this can be made possibe?
    Please Suggest...
    Regards,
    Pawan Shetty

    Dear all,
    Pl. help me which user exit implemented  for MRP RUN without Storage location ,b'coz. from slandered setting we are not able to  do the same
    Regards
    Sandeep

  • Change default storage location during creation of PO

    Hello all,
    I have the following question.
    When creating a purchase order using ME21N and filling in the items, the storage location is retreived from the material masterdata and displayed as default.
    I need to change this default, because the storage location must be determined in another way.
    So when entering the values for the item in the screen, another Stloc needs to be determined and displayed, overwriting the Stloc from the material master data.
    For this I probably need a BAPI.
    Can anyone tell me which BAPI to use and how I can implement this?
    Because I also no experience with BAPI's.
    Thanks in advance.
    Kind regards,
    Marco

    Hi Van,
    You need to goto SE18 -> give 'ME_PROCESS_PO_CUST'  in BADI Name - > Click on Enhancement Implementation at the header -> Create -> Give some implementation name starts with 'Z ->provide some short description -> Here you need to click on 'Interface' tab -> and double click on the method which serves your purpose.
    I think you need to do the enhancement for storage location so you need to use the method 'PROCESS_ITEM'.
    <text removes>
    Thanks,
    Siva
    Message was edited by: Matthew Billingham - don't ask for points

  • MIGO Goods receipt to Direct Sales PO  . Error M7018. Enter Storage Location

    Hi Gurus.
    I want to post Goods Receipt from Direct Sales Purcharse Order.
    In this document type isn't needed a Storage location , but MIGO displays Error M7018 ( Enter Stor. Location ).
    This error only happens in one of our company codes. I think is a customazing error company dependent.
    Please, can you help me.
    Thanks

    If your PO document type doesn't need the storage location, then it doesn't mean that the storage location doesn't need at the time of goods receipt..
    As this is your stock-able material, so you have to enter a storage location. So that the material can kept the stock into a storage location.
    If you use any Account assignment category in PO, then your material will not be kept in stock. In that time you don't need to enter storage location at the time of Goods Receipt.
    At the time of Goods receipt, field selection settings for PO document will not mater.
    Its just depend on your PO - Account assignment category.
    Regards
    Dev

  • Storage Location is not popullating in the PO(for stock materials)

    Hi All,
    we are facing a issue regarding the Storage location in SRM 5.0.(patching SAPKIBKT14) when we try to create a PO with Stock material then the PO will be created but without Storage location.But during the confirmation it will give error saying "Enter Stor. Location ".
    if we enter the storage location manually it will work fine , but we need it should take automatically like other materials.Note:There is not problem if we do SC .. it will populate automatically.
    Please help us.
    Regards
    Channappa Sajjanar

    Hello Channappa,
    Please maintain storage location in field "Storage loc. for EP" in MRP2 view via transaction code MM02.  Once this is maintained the storage location here, it will automatically populate in the purchase order.
    Hope this helps.
    Thanks & Regards,
    Sunil Katyare

  • Storage Location Address Display.

    Dear All,
    Good Morning to all of u. Hope u all are doing well.
    I have issue that i have a plant in delhi location
    1010 Delhi Plant & under 1010 there are diffrent storage location
    as given
    Plant         Storage Location
    1010        FG01
    1010        TR01
    1010        SP01
    1010        TE01.
    These storage location has diffrent address accoring to their address in diffrent area. for example
    FG01 IN KAROL BAGH
    TR01 IN KASMIRI GATE.
    Now the issue is that i have to see the storage location address in system. so please help me.how i can display & modify in the system.
    Regards
    Dev
    Edited by: Parmar_Devender on Feb 10, 2011 7:26 AM

    Hello,
    You need to maintain storage location address first;
    Go to Transaction OX09 >>Enter your plant>>Now select the storage location and double click on Addresses of storage location in Dialog structure>> Now Press that Tab New Entries from application Tool Bar.
    Now Enter 1 and press the Envelope icon and you can maintain your storagge location address. Now this address will come in delivery address of your purchase order.
    Like wise you need to maintain storage location addresses for storage locations FG01, TR01,SP01,TE01 in plant 1010
    BR,
    Tushar
    Edited by: Tushar Patankar on Feb 10, 2011 5:47 PM

Maybe you are looking for