Do we need to run patch-config and install-newconfig

Hi Team,
I have a scenario wherein I have installed the JES2005Q4 messaging server :
bash-3.00# ./imsimta version
Sun Java(tm) System Messaging Server 6.2-3.04 (built Jul 15 2005)
libimta.so 6.2-3.04 (built 01:43:03, Jul 15 2005)
SunOS sunjes22 5.10 Generic_118833-33 sun4u sparc SUNW,Sun-Blade-100
bash-3.00#
I have not configured this box. (Initial run time config is not executed.)
I would be updating the latest patch 118207-63 on this box.
Do we need to run the patch-config and install-newconfig after executing the patchadd command.
This is a fresh installation of the messaging server without any configurations being done
Thanks,

Hi,
I don't know if it is required, but best to err on the side of caution. Worst case nothing will be patched/modified (or there will be an error and the scripts will crash). Either way a valuable learning experience.
btw. Why not install comm-suite-5 (Messaging Server 6.3)?
Regards,
Shane.

Similar Messages

  • Need help with frozen Archive and Install

    I'm trying to run an archive and install for my intel iMac, OS 10.4.11. I get through the first disk fine, but after I put in the 2nd install disk, it gets all the way to the "finishing installation" and then won't move past "running GarageBand Demo Songs Installer Script". it says less than a minute remaining, and the downloading bar is swirling, but there is nothing happening and it hangs here for hours. I've tried restarting, but it will only ask me to load the 2nd disk again, and the same thing happens over and over. Apple even sent me a new install disk 2, and the same thing happened, so I know it's not the disk. Is there a way to push past this?
    I did a disk utility repair and it said everything was fine.
    WZZZ suggested a custom installation, but I haven't tried it yet because I'm worried I might lose the data on my hard drive. (Stupidly) none of it is backed up. Any advice? Do you think I'll lose my data if I force it start over with disk 1 and do a custom install?
    If not, is that the best thing to do?

    Hi there, WZZZ is one sharp guy, go for it, (known him since he was knee high to a Grasshopper!
    Do you think I'll lose my data if I force it start over with disk 1 and do a custom install?
    At worst we should maybe only have complications with several Previous System Folders, but after forcing shutdown reboot do what WZZZ pointed to...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair. Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    That second Disk thing happens frequently, the best way around it is to do a Custom install, and eliminate enough Printer Drivers, Languages, Fonts, and Applications you don't need... then it may skip #2 altogether.
    http://support.apple.com/kb/HT1442

  • I have just purchased the new macbook pro 15" and see that it comes with 2 discs in the box, one being Mac OS X and the other being Applications Install DVD. Are these pre installed? or do I need to insert the discs and install them?

    I have just purchased the new macbook pro 15" and see that it comes with 2 discs in the box, one being Mac OS X and the other being Applications Install DVD. Are these pre installed? or do I need to insert the discs and install them?

    All has been installed. Those are there in case you need to do a reinstall. Unlike most Windows based hardware vendors these days. Apple still ships software you might need in case a drive fails. Even in the case of the new MacBook Air, Apple ships the software on a flash drive.

  • I need to re-download Lion and install it. Holding the Option key while clicking on "purchases" does not work.

    I need to re-download Lion and install it, after re-formatting my hard-drive to "journaled" as requested. Holding the Option key while clicking on "purchases" does not work.

    Thanks Smokemonster. I found that the Lion install app was in in my applications folder already. Worked fine.

  • What does my Mac need to run Access 2003 and SAM training CD

    I'm enrolled in an intro database class using Microsoft Office Access 2003 and SAM 2003 Assessment and Training CD. Both require a PC, but I have Mac Book Pro 2. Would someone please explain to a PC dummy what my Mac would need to run these two applications or if I need to (gulp) purchase a PC. Mostly likely I'll be taking additional classes in the future. Thank you.

    Welcome to the Apple Forums.
    You will need the following to Run MS Access and SAM 2003:
    1. An Intel Mac (You already have this)
    2. Leopard Operating System (You have Tiger), which contains boot camp to install Windows
    3. Windows XP or Windows Vista installation Disk (Please read the Boot Camp instructions/Guide)
    4. Microsoft Office 2003 or 2007 for Windows (which has MS Access)
    Axel F.

  • Need to reformat HDD running Mountain Lion and install Snow Leopard

    I bought a new Retina Display MBP and want to sell my Late 2008 MBP.
    My 2008 MBP is running Mountain Lion, but I want to format the HDD and install Snow Leopard. When I try installing Snow Leopard from the DVD, I get the following message: "You can;t use this version of the application Install Mac OS X.app with this version of Mac OS X."
    How can I get this done?

    The only way to do it is to boot from the Snow Leopard installer disc and the erase and install.  In other words you cannot "downgrade" OS X 10.6 over top of 10.8.  Besides, if selling it an erase and install is the best thing to do anywya - gets all your info off it.

  • Want to run an archive and install, but can't empty trash to free space

    I don't know where to begin... at some point recently something caused problems with several applications, so after trying to repair permissions and repair disk with no luck, I decided to archive & install. Now I want the old problems back: Word/Excel/Photoshop will not open because of some library error (Carbonlib?), and my network settings keep going screwy such that if my computer goes to sleep, I couldn't pick up my wireless signal anymore without restarting (and then ta-da, there it was like there was never any problem).
    So in trying to archive and install I keep stalling at the very beginning... I'll leave it for hours hoping it would proceed but it wouldn't. I've repaired disk several times, with the same errors ultimately coming up. So without being able to archive and install I figured I'd better back everything up and do an erase & install. Started backing things up in prep for moving them onto a server, but when I plugged the server in, my computer said it couldn't get on. Same exact server wire had just come out of my work computer which connects just fine. So now I've got duplicates of all my files on the desktop, so I try to trash them and when I select 'empty trash' or 'secure empty trash', I get the box that says "preparing to empty trash" and then everything except my wallpaper goes away, and eventually comes back as if I've restarted. Now I definitely can't archive and install because with duplicate copies of all my files I have only 1.7gb available and need 1.9 to install just the required files.
    I'm at a total loss! Incidentally, my ipod won't mount if I try to plug it in.
    Are there other options in disk utility that I can try? I don't know enough to feel comfortable just trying something, and I don't know what the "Restore" option does.
    Oh goodness, I hope somebody knows something that can help me out of this.

    http://discussions.apple.com/thread.jspa?messageID=3366422
    Odd, the link works for me.
    -mj
    [email protected]

  • HT1923 I can´t reinstall itunes. I updated and after downloading the latest version and installing it the error message: "apple aplication support was not found. it is required to run itunes. uninstall and install again. Error 2

    I bought an iphone 4s. After plugging it via usb to my computer itunes demanded to update version to 10.3 or higher. I uninstalled itunes, downloaded latest version (11.0.2) and during installation process on "activating services" it shows error message: "installation failed, verify administrator priviliges" which i have because i sign in as my pc administrator. I click on ignore and it tells me itunes has been succesfully instaled but when i try to run it it shows the error message: "apple application support was not found. It is required to run itunes. Uninstall and install itunes again. (which i have done several times) error 2 (windows error 2)." Someone please help me with this problem. Thanks.

    Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • My product code only has 22 letters & numbers but I need 24 to redeem it and install. What should I do?

    I need a 24-alphanumeric code to redeem my serial number and install photoshop but the code on my box only has 22 letters and numbers. I don't know what to do.

    Redemption codes are rarely on the box. See if this helps any:
    Redemption Code Help

  • I just downloaded and installed the 64bit itunes, but I get an error 2 "Apple application support required to run Itunes, uninstall and install again" I did that twice and got the same result

    I am a Windows 7 user and everything has been fine, but when I just tried to open itunes I got an Error 2 message. "Apple application support not found. uninstall and install itunes again." I have done that twice with the same result. this was the 64 bit version.

    Check this Apple document out -> Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    Try following the steps in that article, which will have you remove iTunes and the other bundled Apple software. Then download and install iTunes 10.4.1 for Windows (64 bit).

  • Need help removing Snow Leopard and Installing Leopard

    Snow Leopard was a waste of time and money. Time I could have used for much more productive work.
    How can I remove snow leopard and reinstall leopard. I have the installation disc for Leopard. Can I simply install it over the top of snow leopard?
    That would solve my problem for one machine (the iMac) but how do I go back to leopard if I don't have the disk? I suppose there is dmg somewhere but I haven't looked so I apologize in advance if the answer is obvious.

    Insert leopard install disk-select install.
    It will wipe the drive and install Leopard-all data will be gone.
    You must have a legitimate, legal copy of leopard.
    If you backed up the leopard dvd, you would have to burn it or figure a way to do a network install.

  • I need to run I need to run snow leopard and lion on same computer?er

    I have a Mac Pro and a extra internal hard drive that I would like to put lion on the extra one and run snow leopard on my original one and be able to boot from either one. How does one go about doing this or is it possible?

    OPTION key will continue to work.  Can alspo be used to select an external clone (CarbonCopyClone, $40 download) backup to boot in case of HD failure.  AND OPION key can be used to select the "Recovery Partition" of Lion in case you need it (Command-R also accesses the RecoveryPartition).
    A welath of OPTIONs ... really. 

  • Each time you install a new game, you need to run Creative ALchemy and "Transmute" your application.

    What does this mean and how do you do it. I just put Guild Wars on my machine but no EAX so I assume this is why.
    Help is needed, thanks.

    Wobels wrote:
    First thanks for the reply and so what you are saying is that I need to put the game in the Alchemy.ini file. I thought it would see the game automatically or am I wrong on that.
    The only games that Alchemy will see automatically are the ones that are already in the Alchemy.ini, most (or all) of which should be listed here,
    http://connect.creativelabs.com/alch.../AllItems.aspx
    If you click on the "ALchemy Quick Start" link in the left menu you will get the help menu that tells you how to add games to Alchemy. Personally I prefer to use the GamePath method over RegPath, just easier than mucking about and trying to find the correct regpath. For example I have Far Cry 64 installed (and to tell the truth I dont even know if there is a regpath to use, never looked) and all I did was open Alchemy.ini (in Notepad) and added the following,
    [Far Cry]
    GamePath=D:\Program Files\Ubisoft\Crytek\Far Cry\Bin64
    (D in my case, but would be the drive letter for wherever ou have the game installed), then ran Alchemy and it was in the added games list and clicked Transmute. BTW Far Cry 64 works and sounds great using Alchemy.

  • How to read the s2p file from Agilent 5071B ENA and to save in pc ?, also need to run this continuously and to save s2p file in certain period of time ?

    I interfaced ENA 5071B using labview with agena vi.  I need to save the s2p file from the network analyzer.. I am requesting you guys to help me and pls suggest wat kind of vi i need to use from agena.....
    Thanks

    The PNA driver does not have the vi to full support what you want. The SCPI commands to do what you want are:
    MMEMTOR:TRAC:FORMNP MA; - to format the data in Mag dB Phase linear.
    CALC1ATA:SNPORTsave '1,2' , 'local file name on PNA file system.s2p' - to create  PNA local files of s2p data
    MMEMory:TRANsfer? 'controllerfilename.s2p'  - to transfer the datafile from PNA to test controller using GPIB block transfer.
    You will have to create these SCPI commads and VI's for yourself as the driver does not have them built in.
    Good luck.

  • New version (17) will not run after downloading and installing. Tried twice ...uninstalling between downloads but to no avail. Have re-installled v.15

    this is really to report what occurred this morning.
    since the update to v 17 Firefox would not run
    d/loaded the new version twice (uninstalling between) but to no avail - the program would not open although Task Manager shows the process running.
    have re-installed v 15 so I have a browser.
    lack of a way to report such problems is a weakness which needs addressing

    A possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
    See:
    *https://support.mozilla.org/kb/Server+not+found
    *https://support.mozilla.org/kb/Firewalls

Maybe you are looking for