Do we need to update snpsagent.conf File and Windows Environmental variable in ERPI 11.1.2.2

In ERPI 11.1.1.3 Admin guide its mentioned we need to update the below , do we need to do the same in 11.1.2.2 version also
Updating the snpsagent.conf File
ä To update the snpsagent.conf file:
1 Navigate to the folder where Oracle Data Integrator is installed.
For example, C:\OraHome_1\oracledi\tools\wrapper\conf.
2 Using a text editor, open the snpsagent.conf file.
3 Search for: wrapper.java.library.path.1.
4 On a new line, add the following text:
wrapper.java.library.path.2=../drivers
5 Close and save the file.
Updating the Windows Environment Variable
After you update the snpsagent.conf file, add the ODI drivers path information to the
Windows environment variable.
ä To update the Windows environment variable:
1 On the desktop, right-click My Computer, select Properties. Select the Advanced tab, and then click
Environment Variables.
2 In the System variables section, select the Path variable, and then click Edit.
3 At the end of the Variable value line, add a semi-colon (;), and then add the Oracle Data Integrator
driver path.
For example, C:\OraHome_1\oracledi\drivers.
4 Click OK three times.
5 Restart the Oracle Data Integrator Agent Service.
Thanks

You should not have to do this in ODI 11.1.1.6 for ERPi 11.1.2.2.

Similar Messages

Need to update the business place and section code for the advances

Hi,
I need to update the business place and section code for already posted advance payment requests (f-47), advance payments (f-48) and clearing documents (F-54).
I can able to update the business place and section code for only invoices those are coming from MM route in J1INPP.
guide me
sateesh

Hi ,
Please follow the below point as per note no 640231
2. Path : Transaction SM31 . Enter the table name as TRWPR and press
                                                                  Page 2
    maintain .
    a) Delete all entries linked to component ZIND if they are present.
    b) Check that, entries as specified below exist for Component IND.
       Business
       Tran.    Time     No    Component        Function Module
       DOCUMENT CLOSE    043   IND              J_1I6_UPDATE_BA
       DOCUMENT CLOSE    044   IND              J_1IEWT_UPDATE_SECCO
       DOCUMENT PREREV   810   IND              J_1I6_CIN_DOC_PREREV
       DOCUMENT CLOSE    810   IND              J_1I2_COPY_TO_LOCAL
       RABELEG ERGAENZE 810   IND              J_1IEWT_COPY_BUPLA_FBZ
       BELEG    POST     810   IND              J_1ITDS_TABLE_UPDATE
       DOCUMENT CHECK    810   IND              J_1I6_VALIDATE_GR
       DOCUMENT POST     811   IND              J_1IEWT_UPDATE_PROVISION
       BELEG    POST     811   IND              J_1IEWT_UPDATE_PROVISION
       BELEG    CLOSE    820   IND              J_1I2_COPY_TO_LOCAL
       DOCUMENT CHECK    820   IND
       J_1I6_VERIFY_GR_EIC_QUANTITY
       DOCUMENT CLOSE    820   IND              J_1I6_COPY_TO_LOCAL
       DOCUMENT CLOSE    821   IND              J_1IEWT_COPY_TO_LOCAL
       DOCUMENT POST     821   IND              J_1ITDS_TABLE_UPDATE
       BELEG    CLOSE    821   IND              J_1IEWT_COPY_TO_LOCAL.
    For the first two entries which are marked with sequence number 43
    and 44 for the Business Transaction 'DOCUMENT' and Time 'CLOSE' ,
    ensure that the sequence number is below the number for function
    module FI_DOCUMENT_CLOSE. This is to ensure that these two functions
    are processed in time for other checks in Financial Accounting.
MIRO documents also will update the Business place section code.
Reg
Madhu M

I removed my named.conf file and rebooted, zones blank, but dns now works...

Folks,
After upgrading from OS X server Mountain Lion, i skipped 'Mavericks' and upgraded when Yosemite and server 4 came out...
Something whacky happened w/ my DNS(probably had temp info so i could upgrade to Yosemite...) anyway, everything worked,
EXCEPT, i could not pull up my website that i am running on said server on internal network... all worked from outside...
So... i renamed my 'named.conf' file and rebooted. EXCELLENT! everything works! EXCEPT! my DNS zones are not listed on the DNS control panel in server...
YET, EVERYTHING STILL WORKS! even after a reboot! db Files are still in named directory, but not listed in Zones panel...
at this point, since everything is working, i'm really reluctant to keep troubleshooting, but i would like to know why it's still working, and how i can rewrite the named.conf file so it will continue working... named.conf file contains:
options {
forwarders {
68.XX.XXX.XXX;
i masked out the actual IP - thanks!
Rich Z

Hi Moses.
Here are the crash id's.. however, since disabling all extensions apart from firebug, it's no longer crashing. However, I'm still having trouble loading javascript files... I'm testing a .js file with only an alert statement in it, and the file isn't being found. I've checked the file for funny characters, line breaks are set to Unix LF, encoding is Unicode UTF-8 no Bom. I'm using php codeigniter, not sure if that would cause issues. I just can't think what is going wrong!
I'm only using firefox so I can use firebug, so disabling firebug isn't an option. I've re-installed the latest firebug 1.5.4.
http://crash-stats.mozilla.com/report/index/bp-526dd7f8-1f36-4ae6-b076-d8abb2100609
http://crash-stats.mozilla.com/report/index/bp-b9adb719-a97a-4302-a4d1-55bea2100211

I need to update my operating system, and I am not sure which to purchase. I currently have OS 10.5.8

I need to update my operating system, and I am not sure which to purchase. I currently have OS 10.5.8. Which one should I buy?

Click here.
(79581)

HT201359 I need to update my compte skype and facebook in the apple store but they require me to get the ios5 but I don't no how to get that option

I need to update my compte Facebook and skype in the apple store since yesterday but it din't working they require me to get the ios5 but I don't know how to get to get the ios5

If your iDevice is using a version of iOS lower than 5, you will need to use iTunes on your syncing computer to perform the upgrade. Use the Apple link below as a guide for the upgrade.
http://support.apple.com/kb/HT4972
Also read the instructions from the section entitled "Update your device using iTunes" at the link below.
http://support.apple.com/kb/HT4623

I am trying to reinstall Windows on my macbook pro. I downloaded the support files and Windows 7 iso file to a USB drive. However, when I try to run the setup.exe program I get the message "this program cannot be run in DOS mode."

I am trying to reinstall Windows (would not launch). I removed the partition and started over. I downloaded the support files and Windows 7 iso file to a USB drive. However, when I try to run the setup.exe program I get the message "this program cannot be run in DOS mode." I was successful before, what am I doing wrong this time?

Try a restart.
If that doesn't fix the problem, shut down the computer and then power it back up. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application unistaller. For each disable/delete, you will need to restart if you don't do them all at once.
Safe Mode
Safe Mode - About
General information.
Isolating issues in Mac OS X
Troubleshooting Permission Issues
Step by Step to Fix Your Mac

HT202443 Need to update the sample file only of my iBook

How can I update the sample file of my iBook?
Seems that if I update from iBooks Author it will replace the book by the open sample.
In iTunes Loader or iTunes Producer I do not see any options to update.
Thanks

Hello GoldSpanner,
This can be done using the 'Consolidate files' function in iTunes.
iTunes 11 for Windows: Change where your iTunes files are stored
http://support.apple.com/kb/PH12365
Cheers,
Allen

PHP need a fresh http.conf file

I modified my http.conf file to install PHP but obviously I did something wrong. Is there a way to get a fresh new http.conf file. My problem is that I did not take a back-up before the modification.

Hi Alan,
   I like your second suggestion as I like BBEdit. However, it omits one important step that you so thoughtfully included in your command-line suggestion; saving a backup of the broken config file. I doubt that all of it is broken and if the changes are extensive, one simple method of isolating the problem is to add the changes back individually or in small groups. Reboot the server between each change so that you'll see when the problem change is added.
   You might learn a lot from the "apachectl configtest" command. Of course again, that requires the "bad" config file to find the problem. However, apachectl will usually tell you exactly which line is causing the problem.
Gary
~~~~
   Never face facts; if you do you'll never get up in the morning.
         -- Marlo Thomas

Want to update a text file and reflect the same on iview immediately

Dear friends,
I have a text file in a repository path
I could read each line and do some task.
My query is for each line task, i would like to update a file (for me it is log file) and reflec the same on a iview in the same page
sample code appreciated
regards
Kantha

If the user backs up their device to either iCloud or Mac/PC, they can restore the app data from that backup.
There's no need to do what you intend.

Boot Camp Version 1.3b expired.. need to update but don't have windows.

So let me run you through what I did so far.
I got a version of Boot Camp 1.3 beta. I successfully installed it and began to go through the steps to set up windows. I skipped the burning the windows CD option and went straight to the partitioning. I created a 20gig partition named "Bootcamp."
I then realized I needed to burn the windows CD from Boot Camp in order to install it. So I quit the Boot Camp Assistant Application. The option to burn the windows CD was no longer available so I scrapped the Boot Camp Assistant, re-downloaded the 1.3 beta version and installed it.
Still no opportunity to burn the windows drivers CD disc. So I quit the assistant once again. I attempted to re-open the Boot Camp Assistant and I got an error message telling me it expired. So I set the date back on my clock to a date before the beta version expired (prior to Sept. 30, 2007).
Then, I got this error message:
This version of Boot Camp Assistant is not supported in Mac OS X v10.5. Use Boot Camp Assistant 2.0, located in /Applications/Utilities/.
And that's where I am right now. I still have to have the date set back to before Sept. 30th, 2007 to get to the error message above or else it tells me the version is expired.
So I've determined that I need to update Boot Camp to version 2.0 or higher, except I don't have windows installed on my computer yet. The mac support page tells me that I have to open windows and then install the updates to the latest version of boot camp... which I obviously can't do because I haven't installed windows yet.
So I'm stuck with a partitioned drive and I cannot use the Boot Camp Assistant. I need the assistant to burn the windows install CD that I need..
I'm in quite a pickle. Any help would be appreciated.. thank you.
If you need more information let me know I'll try provide the information needed to fix this issue.
Thank you.

I don't have the Leopard disc because a man updated it for me in the mac store when I brought my laptop in for repairs.
You need to get that disk to use Boot Camp. Mac OS X 10.4 disks don't contain the drivers.
So, I have this Mac OSX install disc.. do I just insert it? And then what? How do I go about installing windows after that? I'm a little confused about how to get to the drivers and what to do I'm just not sure.
Once you've partitioned the drive and installed Windows, start up the computer into Windows and insert the disk. The installer should automatically start.
(44923)

Need manual updates for 9.2 and 9.55 to do clean reinstall of acrobat 9.0 pro from cd

I just did a new nstallation of acrobat V9.0 professional from CD:
I need a link to the master incremental update for 9.2 and the master 9.55 incremental update that goes from V9.2 to V9.55
I am looking for a master baseline release.
My reinstall is on an old XPSP3 machine. When acrobat professional 9.0 goes away I will still need the incremental update from V9.0 to V9.55
I do not need to put acrobat X or acrobat XI on this machine. A new acrobat X or acrobat XI license is for a new machine.
I keep all my master and incremental updates in archival. That way i can rebuild my machine.
This is the way it is normally done.
the autoinstaller jumped me from V9.0 on CD to V9.2 and from V9.2 to V9.55.
I dont' see master releases in the table that do the same thing.
there were only 2 updates.
normally support would just send me a link out-of-band. i understand I need to send the request thru the forum
many thanks!

Most of the manual updates are not cummulative. It sounds like you did the updates from the help menu (and many of those are cummulative -- don't know why they are not available). You may be able to find the updates you used on your harddrive -- I have seen them before, but don't remember where, probably the users folder or such.

// Code Help need .. in Reading CSV file and display the Output.

Hi All,
I am a new Bee in code and started learning code, I have stared with Console application and need your advice and suggestion.
I want to write a code which read the input from the CSV file and display the output in console application combination of first name and lastname append with the name of the collage in village
The example of CSV file is
Firstname,LastName
Happy,Coding
Learn,C#
I want to display the output as
HappyCodingXYZCollage
LearnC#XYXCollage
The below is the code I have tried so far.
// .Reading a CSV
var reader = new StreamReader(File.OpenRead(@"D:\Users\RajaVill\Desktop\C#\input.csv"));
List<string> listA = new List<string>();
while (!reader.EndOfStream)
var line = reader.ReadLine();
string[] values = line.Split(',');
listA.Add(values[0]);
listA.Add(values[1]);
listA.Add(values[2]);
// listB.Add(values[1]);
foreach (string str in listA)
//StreamWriter writer = new StreamWriter(File.OpenWrite(@"D:\\suman.txt"));
Console.WriteLine("the value is {0}", str);
Console.ReadLine();
Kindly advice and let me know, How to read the column header of the CSV file. so I can apply my logic the display combination of firstname,lastname and name of the collage
Best Regards,
Raja Village Sync
Beginer Coder

Very simple example:
var column1 = new List<string>();
var column2 = new List<string>();
using (var rd = new StreamReader("filename.csv"))
while (!rd.EndOfStream)
var splits = rd.ReadLine().Split(';');
column1.Add(splits[0]);
column2.Add(splits[1]);
// print column1
Console.WriteLine("Column 1:");
foreach (var element in column1)
Console.WriteLine(element);
// print column2
Console.WriteLine("Column 2:");
foreach (var element in column2)
Console.WriteLine(element);
Mark as answer or vote as helpful if you find it useful | Ammar Zaied [MCP]

Need help to set up file and print sharing

i just bought my router and i needed help setting up file and print sharing i am using windows xp on both of the computers one is a desktop and the other one is a laptop

Here
Enabling File and Printer Sharing
"Sometimes your knight in shining armor is just a retard in tin foil.."-ARCHANGEL_06

HT4623 MY IPAD 2 VERSION 4.3.5; I NEED TO UPDATE TO IOS 5 AND AM UNABLE. THERE IS NO UPDATE SOFTWARE PROMPT IN MY SETTINGS

my ipad 2 needs to update to ios. I'm unable to update my apps because it does not have ios 5. The version is 4.3.5. (8L1) wahtever that is? There is plenty of capacity available. In the online help it says to be sure you have the latest version of itunes, I have no idea if I do and can't seem to update that either.

Scroll down the Support article you came here from (linked at the top of this page) and follow the instructions for updating using iTunes.

What can i do about a repeated message saying I need to update my adobe reader and

...and after i download it and start to install it, it stops and says that I already have it installed. Then later another box pops up saying i need to install update... and it keeps repeating. Help? Please? Thank you

Please be extremely cautious. There are some scam messages which try to get you to install Adobe Reader and some other things that may not be good for your computer.
Let's see if you really do need an update. What version do you have? Start Adobe Reader and use Help > About Adobe Reader to see the exact version (something like 10.1.2).

Do we need to update snpsagent.conf File and Windows Environmental variable in ERPI 11.1.2.2

Similar Messages

Maybe you are looking for