Do we need to use fork to merge three files into one in BPM

hi friends ,
I have to merge three files to produce one file in (multiplesenders to inbound scenario) ,dowe need to use fork in BPM if yes then how to use it please explain to me ,if not then what may be the solution.Please reply at the earliest.
Thanks & Regards,
Vinay Yadav

Hi Vinay
To Collect Files from one Sender:
There is ne need of using fork. U have a loop in the BPM and give the condition as counter 'notequals' 3 and have the receive step in it. Also have a two container variables within the loop one container variable is to collect the 3 files and the other container should be ur counter that determines the termination condition of ur loop.
To Collect File from Multiple sender:
U should have 3 receive steps within fork to collect the three files and also u should have a correlation to match the files.
To know more about correlation go thru the following link:
http://help.sap.com/saphelp_nw04/helpdata/en/a5/64373f7853494fe10000000a114084/frameset.htm
Making Correct Use of Correlations :
http://help.sap.com/saphelp_nw04s/helpdata/en/6d/94364296f1b26be10000000a155106/frameset.htm
Blogs:
/people/sravya.talanki2/blog/2005/08/24/do-you-like-to-understand-147correlation148-in-xi
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm
Regards
Santhosh
*If Info was useful Reward Points*
Properties of 'counter; container variable:
Operator:+
Expression:1

Similar Messages

How we need to use fork to merge three files into one in BPM

Hi Friends,
Please send me some example that has three files merged to one using fork in BPM.
Thanks & Regards,
Vinaiy Yadav

Hi Vinay,
go to software component SAP BASIS, than to namespace http://sap.com/xi/XI/System/Patterns.
You will find there several BPM patterns which you can examine/reuse.
The following ones will give you an answer to your question.
- BpmPatternCollectMultiIfCondition
- BpmPatternCollectMultiIf
Regards,
Andras

I want to merge mp3 files into one file so i can play a mix in i tunes without pauze

i want to merge mp3 files into one file so i can play a mix in i tunes without pauze

Audacity is what you need.
Obviously you need to create a new MP3 file of the combined songs and not delete the originals.
If your DJ-ing and/or just have too many songs to do that, then look at the free VirtualDJHome version, gives you a lot of control over your music playback.

Is there a simple way to merge mp3 files into one mp3 file:

Is there a way to simply merge multiple mp3s into one? I have audacity; however, that program becomes cumbersome when merging multiple files.
My thanks to anyone for help on this one.

I have audacity; however, that program becomes cumbersome when merging multiple files.
How true! I had to do this recently and used Audacity for the task, having nothing else suitable (that I know of, at least). My method was to open each MP3 in its own Audacity window, select and copy all of the second file, close its window, and paste it into the end of the first file, repeating the process for each additional MP3. After all the pieces are in place, export the whole thing as a new MP3. This was cumbersome indeed, and it took concentration to remember which file was which and avoid assembling the pieces in the wrong order. This description will make a lot more sense to someone who has done it than to anyone who hasn't.
All of this is to say that if you get a better answer than my kludgey Audacity method, I'll be as grateful as you are.

How to merge indesign files into one

Hi, I have some publication as book indesign files, then I want merge these individual indesign files inside one file. I search a lot for plug-ins and scripts to do it, but nothing I dont want just PDF files, because I need edit the files after putting them together. Any tips will be valuable Regards

Try this one: go to -
http://kasyan.ho.com.ua/scripts_by_categories.html
search the page until you find
Mass combine a bunch of indd files into one by Simon Wiscombe
hope that helps
Colin

How to merge multiple files into one pdf

I would like help with this task. If I could do this for free I woul actually be more likely to follow advice. Many thanks

Hi Lauravill,
The free Adobe Reader cannot help you with the merging job. If you have Acrobat Reader then you can merge files into one pdf with the following steps-
Within Acrobat XI, select File > Create > Combine Files into a Single PDF.
Click Add Files and select the files you want to add.
Click, drag, and drop to reorder the files and pages. Double-click on a file to expand and rearrange individual pages. Press the Delete key to remove unwanted content.
When finished arranging the files, click Combine Files.
Select File > Save As > PDF.
Name your PDF file and click Save.
Let us know if you face any problemwith this or need extra support.
Thanks
-Satyadev

Joining / Merging csv files into one

Hi,
is there a way to join or merger a bunch of csv files into
one file?
regards
Martin

Thx Dan, for the reply, well I have the reference manual
right in front of me, and I thought about using cffile, but my
experience has been that cffile is very slow so merging say like 20
- 30 files into one with 600 records in each would be somewhat time
consuming or if even possible? does anyone know?
regards
Martin

Help merging 3d files into one 3d-pdf-scene

Is it possible with the LCS to merge 3d-files into a single 3d-pdf-scene just like it is in the Adobe 3D Reviewer? I don't have a "Master"-file that defines an assembly like a catia *.CATProduct file so I can't refer supporting documents in the Generator3D. I also tried the assembler-service but with that I was only able to create a PDF that holds all the single 3d-data on different pages and therefore in seperated 3d-scenes.
thanks

Hi Timo,
If you are still interested in this functionality to merge 3D files in batch, please contact me at [email protected] to discuss further.
Thanks.

Can anyone help? Need to collect 4 or more pdf-files into one file

Hi,
I regurarly need to mail pdf-files. I'm searching an app or program that can collect 4 or more different pdf-files into one file. So I don't need to send them all apart.
Can anyone help me out?
Thanx!
Theo

Open Preview, open the PDFs you want to combine, select View/Show Thumbnail, drag the PDFs, you want to combine to the first PDF, then Export as PDF.
Preview Help

How to merge pdf files into one pdf file?

In E-Rec we need the capability to mass printing for correspondance. There i want to merge pdf files for candidates into one pdf file. I am doing the following:
Data: lv_document1           TYPE rcf_s_cs_document_content.
LOOP AT activity_object_tab INTO ls_activity_object.
    lo_act_corr ?= ls_activity_object-activity.
     CALL METHOD lo_act_corr->process_document
       EXPORTING
         channel = 'FRONTEND'
       IMPORTING
         document = lv_document1.
ENDLOOP.
Now lv_document1 contains the pdf file in lv_document1-DOCUMENT_X which is of type RAWSTRING.
This works for one candidate, in this case the pdf for last candidate will be displayed.
But how would i append in the loop or what would i need to do display all candidates in one pdf.
Any help will be appreciated.
Thanks

File>Create PDF>From File.
Please post followups in the Acrobat forum.
Bob

Acrobat Professional 9 error merge multiple files into one file

In the same file I made the text boxes and then I have produced more than one file, I then tried to merge into a single file but the software copies the same pages of the first file.
Let me explain:
1) in the first file number 1 I have 3 pages, these pages I have text boxes and then I saved the file with no 2, then No. 3, then 4;
2) I took the first file and the file I downloaded in the last 2,3,4
3) I opened the software to control and I copied the file multiple times n. 1 just
4) so now I have to file a repeated 4 times in a single file.
What should I do to be merged into a single file as separate files?
Perhaps this warning is that you understand the problem, since I used the same page by giving it a different name just because I made some text boxes with different content, that is, the program identifies the file and then continues to quote the same as another copy the same file, then I should change the form field for each file. How should I proceed?
Of course I followed the instructions of the notice but the thing has not changed, all the files you copy the same.
I enclose a picture
[url=http://www.iouppo.com][img]http://www.iouppo.com/life/1103/2ad6981bf5a030b25ae3acdcaa723a4 5.jpg[/img][/url]

Sorry, this is the Adobe Connect support forum and not related to Acrobat. Suggest you re-post to the Adobe Acrobat forum for help with this question. Thank you.

I keep getting conversion failure when I try to merge PDF files into one file

What am I doing wrong? Very frustrating

Hi KLM3340,
Please send us your original file using the following File Conversion Issue form and Adobe will take a closer look at the file.
Best,
Sara

Merging PDF's into one file Error: "File Skipped"

I'm trying to merge multiple files into one. However, on some of the pages I get an error code "File skipped". How do I correct this issue so that I can merge all the files successfully?

This usually means the file has encryption applied (preventing changes), it's been Reader-extended (also preventing changes) or it's an XFA file from LiveCycle Designer. Open the file in question and check the properties.

Problem: Merging same Files into 1 File using BPM, Receiver File empty.

Hi All,
I am trying a scenario where I need to merge two similar files into one single file (Append) using BPM
I am following the same structure as defined in the predifined BASIS Namespace i.e. http://sap.com/xi/XI/System/Patterns for Integration Process BpmPatternCollectPayloads. The only thing I changed is that inside my loop I am having a container dat counts till 2.
Now when m testing d interface, the file @ reciver directory is generating, but without any data i.e an empty xml is generating. PI is also not showing any error anywhere.
My Message mapping structure is as follows:
Sender Side:
<Message>    (1..1)
   <Message1> (1..1)
       <MT_myMessageType> (0..unbounded)
                <Records> (1..1)
                        <Id(Used for correlation)> (1..1)
                        <Name>   (1..1)
                        <Address> (1..1)
Receiver Side:
<Message>    (1..1)
   <Message1> (1..1)
       <MT_myMessageType> (1..1)
                <Records> (0..Unsbounded)
                        <Id(Used for correlation)> (1..1)
                        <Name>   (1..1)
                        <Address> (1..1)
Can anyone plz help me.

Inbound Message after PE, is empty, so the Request Message Mapping (Technical routing) step is also showing a Empty XML without any structure.
So you mean to say The inbound Message for BPM -
> File is empty?.....this clearly means that
1) the transformation step in BPM is not producing the required XML
2) some validation is imposed in the mapping...which if not satisfied is not creating the target structure.....
Can you ensure that the transformation step outside the block is working properly....and that your BPM design is exactly same as in BpmPatternCollectPayload (except the number of times the loop is executed)......
just few days back even i was stuck in a similar situation....the transformation step outside a Block was not producing a particular element in the target......i made some dummy changes in the mapping and then again included in the transformation step and then my BPM worked fine.......so the conclusion is either the data from block is not going into the transformation step or the transformation step is not creating the target.....
Regards,
Abhishek.
Edited by: abhishek salvi on Jun 30, 2009 12:10 PM

Need to merge multiple files into pdf automatically

Guys,
I need to automate merging files into one pdf, i have looked everywhere and cannot seem to find an answer for it. I need to know if there is a command line tool for acrobat so i can use it in my batch file to combine files?

Hi Lauravill,
The free Adobe Reader cannot help you with the merging job. If you have Acrobat Reader then you can merge files into one pdf with the following steps-
Within Acrobat XI, select File > Create > Combine Files into a Single PDF.
Click Add Files and select the files you want to add.
Click, drag, and drop to reorder the files and pages. Double-click on a file to expand and rearrange individual pages. Press the Delete key to remove unwanted content.
When finished arranging the files, click Combine Files.
Select File > Save As > PDF.
Name your PDF file and click Save.
Let us know if you face any problemwith this or need extra support.
Thanks
-Satyadev

Do we need to use fork to merge three files into one in BPM

Similar Messages

Maybe you are looking for