Do we require 2 FIM Licence if installing FIM portal on 2 servers for HA
Hi,
We are installing FIM portal on 2 windows servers for achieving HA.
Please help by sharing will it cost us two FIM Licence to do that.
Thanks,
Varun
On Tue, 18 Feb 2014 15:57:20 +0000, var9287 wrote:
We are installing FIM portal on 2 windows servers for achieving HA.
Please help by sharing will it cost us two FIM Licence to do that.
Yes. A server license is required for any server on which FIM is installed.
http://download.microsoft.com/download/5/4/8/548C1F3D-0816-48D5-8454-2AE1F18DD01E/Forefront%20Identity%20Manager%202010%20R2%20Licensing%20Datasheet.pdf
Paul Adare - FIM CM MVP
Niklaus Wirth has lamented that, whereas Europeans pronounce his name
correctly, Americans invariably mangle it into "Nick-les Worth". Which is
to say that Europeans call him by name, but Americans call him by value.
Similar Messages
-
Bhold attestation setup if FIM POrtal is already used for Group Membership
Background - We had a FIM 2010 deployment in production deployment. Few
months ago, we upgraded it to FIM R2. There are already about 4000 Criteria based Groups and Request Based Groups at FIM portal. FIM portal is used as an authoritative source for group membership.
Problem Statement - The requirement is to attest the existing and
ongoing Request Based group membership of users using BHold User Attestation module. We want to continue FIM portal (not Bhold UI) as the end user interface for requesting the group membership.
Hence, for metaverse' group object's member attribute, FIM Portal should have higher precedence than Bhold MA.
From available documentation of Bhold, I understand that BHold is more suitable in cases where FIM Portal is not already the Group Membership deciding system. However, in our already existing
deployment, both group membership is given by FIM portal. In fact this should be the case with all the FIM deployments before Bhold’ s release.
Please suggest on how to attest the group memberships.
Mayank VaishI would not expect to have to attest group membership where that membership is controlled programmatically. The idea of Attestation is for a responsible person to attest and confirm that the membership of a given group/role/permission is correct (and remove
users who don't need that permission). As long as someone responsible has attested that the rules that govern the automatic group membership are appropriate for the permission controlled by that group, then another round of attestation via BHOLD would seem
like overkill.
However, in the case where membership of FIM groups is managed via FIM's approval mechanism then there may well be a case for BHOLD attestation. It will depend on the business's audit requirements and how well the FIM logs are being maintained, and
also the sensitivity/importance of the permission being managed by the group. If it is not possible to prove who approved membership of what group - and to confirm that that membership is still appropriate - then regular attestation may still be required,
in which case BHOLD is an easier way of doing it than trying to build your own or do it manually.
Cheers,
Dave -
How to find and install the Portal Development Kit (PDK) for SAP Enterprise
Hi ,
I have the following question regarding thePortal Development Kit (PDK) for SAP Enterprise Portal 6.0. We have Enterprise Portal 6.0 up and running.
1> How Do I find whether we already have this inported in the EP environment: I have admin and super admin role and trying to find '*java' in the Role. But didn't find one. Does that mean we don't have this imported already?
2> I have tried to Find out the PDK( which is also a Business Content) in SDN in the Portal Business content link (https://www.sdn.sap.com/sdn/contentportfolio.sdn) , but haven't found. Where from I download this business content?
3> What are the special steps that need to be taken to import this and make it working?
Thanks
ArunabhaHi Arunabha,
1. Note that the search is case sensitive. Therefore you should search for java and Java.
2. Download from: https://www.sdn.sap.com/sdn/downloaditem.sdn?res=/html/PDK60_download.htm
3. Deploy with SDM: http://help.sap.com/saphelp_nw04/helpdata/en/22/a7663bb3808c1fe10000000a114084/content.htm
Hope that helps,
Yoav. -
Combinding Resources in the FIM Portal Navigation Bar
We have two different OUs for computers in our AD that have the same attributes. Server and Workstation, there is no attribute that indicates if the computer is a server or a workstation. My solution was to create two different MAs, AD Server MA and Workstation
MA and corresponding Metaversa objects and FIM schema objects. All good so far, I sync the appropriate computer objects from each ou into their corresponding FIM schema objects. I have created FIM Portal Navigation Bar Resources for each
that show the Servers and Workstations correctly. My question is this, I would like a Nav Bar resource - Computers - that combine both of these resources, and then under Computers have Servers and Workstations - is this possible?
Computers
Servers
Workstations
Thanks in advanceHello,
thats quite easy to do.
Simple create a "Search Scope" that includes both Computer types.
Use this search scope as the Navigation Bar URL, the easiest way to get the URL (which contains the GUID of the Search Scope) is to add "Global" to the Search Scope Keyword, after that you can use the Search scope from the FrontPage of the Portal
for a search. In IE you should then see the URL for this Search scope an can use this in the NavBar Res.
The article ManuJ mentioned above will help you with that, here is the link:
https://technet.microsoft.com/en-us/library/ff393653%28v=ws.10%29.aspx?f=255&MSPPError=-2147217396
-Peter
Peter Stapf - ExpertCircle GmbH - My blog:
JustIDM.wordpress.com -
I have been using itunes on my windows 64 bit laptop for years but since downloading the latest itunes 10.7 update whenever I opened itunes the error message 'A required itunes component is not installed. Please reinstall itunes (-42404)'
Itunes would still load and play music in my library and I could still sync my ipod but when loading a CD itunes would not recognise the album/tracks and I would need to type them manualing after uploading.
I have just bought the new iphone5 and went to sync the phone with itunes. itunes recognises the iphone when plugged in via the usb port or when wi fi is turned on but itunes will not allow the phone to sync.
I spent over an hour the other morning speaking to apple customer support and have ensured I have administer right and that UAC is turned off.
I was taken through msconfigure and adjusted the startup tab but still no joy.
In the end I was e-mailed instructions on how to uninstall and then reinstall itunes and component parts.
Now that I've uninstalled itunes when I try reinstalling I get the following messages during the download.
The 1st message is;
'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
When I click ok the next message that appears sometime later during the install is;
Service 'Apple Mobile Device' (Apple Mobile Device) Failed to start Verify that you have sufficient privileges to start system services.
The options I have are to abort, retry or ignore. If I retry the same message comes back and if I abort or ignore the download continues and I then get the following message:
'Apple Application Support was not found. Apple Application Support is required to run itunes Helper. Please uninstall itunes, then reinstall itunes again. Error 2'
After attempting to reinstall itunes only some components were installed however itunes would not open.
It would appear many people have experienced problems with this latest download!'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards? -
I tried to install iTunes 10.6.1 for Windows (64 bit) and it says "A required iTunes component is not installed. Please repair or reinstall iTunes. (-42404). I have tried uninstalling everything and reinstalling and it still does not work. I then restored my computer to a week ago and tried to download and install the update and this came up again.
Check out this thread:
https://discussions.apple.com/thread/3677426?start=0&tstart=0 -
When I start iTunes I get the following message. "A required iTunes component is not installed. Please repair or reinstall iTunes (-42404)". I have installed the latest version of iTunes but still get this message. Can anyone help?
Hello mustangcim243,
iTunes has various components bundled with it that it requires for general usage. I advise that we completely remove iTunes and all of these related components, verify that they have been removed, then reinstall. To do so, please follow the steps in this article:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
Note: it is important to remove the 7 components in order. Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
If the above does not resolve your issue, I recommend we reset the SC Info folder:
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/TS1389
(See Step 4: Remove the SC Info folder)
Thanks,
Matt M. -
Hello everyone,
Give you a little background on the hardware/software which we are running to do a Windows 8.1 Deployment, we have an VM of Windows Server 2008 R2 with Windows Deployment Services installed and configured correctly. For the boot image it's a Windows 8.1
WIM and as for the Install Image we have a base image of Win 8.1 with all drivers installed for an HP EliteBook 8540w , we Syspreped and then capture the image using the W2K capture on PXE to capture and upload the image to the server. This is where we first
ran into the problem of connecting to the server and had to inject the lan drivers to have network connectivity. After the image was uploaded to the server, we thought to try and run a deployment of that image on an identical laptop. PXE boot into that Image,
it asks for domain credentials which are accepted it begins the installation process and fails at "Windows installation cannot continue because a required driver could not be installed"?
We just set up client logging on the server and it is useless it just says that the driver is missing, but what driver is missing? There are thousands, which one?
Another forum has this issue: http://social.technet.microsoft.com/Forums/windows/en-US/4cf0b378-09d0-4e0b-bc6e-3d898b668f98/during-deployment-windows-installation-cannot-continue-because-a-required-driver-could-not-be?forum=w8itproinstallHi,
Please first check the solution here:
Error: Windows installation cannot continue because a required driver could not be installed
http://support.brainwaregroup.com/kb/article/AA-00702/0/Error%3A-Windows-installation-cannot-continue-because-a-required-driver-could-not-be-installed.html
Also, please try to find out Setup logs from the client computer, and we can see the details in the Setup log:
If the failure occurs in Windows PE before the disk configuration page of the WDS client is completed, you can find the logs at the
X:\Windows\Panther folder. Use Shift+F10 to open a command prompt, and then change the directory to the location.
If the failure occurs in Windows PE after the disk configuration page of the WDS client is completed, you can find the logs on the local disk volume at the
$Windows.~BT\Sources\Panther folder. The local disk volume is usually the drive
C. Use Shift+F10 to open a command prompt, and then change the directory to the location.
Kate Li
TechNet Community Support -
Him
Every time I start up iTunes I get this error message. "A required iTunes component is not installed. Please repair or reinstall iTunes (-42404)." I have researched this on Google and I have not read of any solution. Please advise.Here you go: http://support.apple.com/kb/HT1923
There are three steps so make sure you follow all of them. They are:
remove iTunes and everthing related to it
verify everything is really removed
reinstall iTunes. -
TS1717 a required itunes component is not installed.(-42404)
Hi There..I updated my itunes (running on Windows 7) to the latest version(11.0.3) then whenever i open it it gives me an error message saying that a required itunes component is not installed(-42404). Also can't sync my iphone anymore. I've tryed repairing but still the same problem exists..HELP PLEASE
Sometimes this one indicates that your FairPlay is broken, but other components might be dodgy.
Let's try a complete uninstall/reinstall as per the following document:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
Does that help with your 42404? -
Required Itunes component is not installed -42404
My system is Windows 7 64bit. After the iTunes update to 10.3, iTunes is now unusable, will not reconize my iphone.
Get the following messages
Required iTunes component is not installed -42404
Could not purchase required iTunes compoenet is not installed.
I got a message that my IPhone was not reconnized also and that I needed to re-set to factory default which I did, but now I lost all the apps on the iphone and I can not reinstall iTunes without receiving these error messages. No problems with Itunes until this new update.
I have followed the suggestions to completeley uninstall iTunes and all the components including QuickTIme and MobileME. I have done this 3 times now. The last error message was regarding iTunes Helper.
Really frustrating as I can not install Itunes so that I can reinstall my apps and music on my iPhone. Any help would be greatly apprecaited.Hi, I've had exactly the same issue as the chap who first posted. Don't really want to have to re-install iTunes and lose all the stuff/iPhone backups I've got on there. I've rune the diagnostics as mentioned; please see below:
Microsoft Windows XP Home Edition Service Pack 3 (Build 2600)
INTELR AWRDACPI
iTunes 10.4.0.80
QuickTime 7.6.9
Apple Application Support 1.5.2
iPod Updater Library [Error:0000000D]
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.4.1.2
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.2 (333.2)
Gracenote SDK 1.9.1.485
Gracenote MusicID 1.9.1.102
Gracenote Submit 1.9.1.133
Gracenote DSP 1.9.1.43
iTunes Serial Number 0012ACB80A0DBBB8
Current user is an administrator.
The current local date and time is 2011-08-16 21:28:40.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
NVIDIA GeForce 6800
**** External Plug-ins Information ****
No external plug-ins installed.
Genius ID: d5b1c7246190ab8289f67d3e590bcbb3
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {711D230C-2B09-4DF9-B298-0F8A66D46DD0}
Description: NETGEAR WG111v2 54Mbps Wireless USB 2.0 Adapter - Packet Scheduler Miniport
IP Address: 192.168.1.66
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.254
DHCP Enabled: Yes
DHCP Server: 192.168.1.254
Lease Obtained: Tue Aug 16 21:22:10 2011
Lease Expires: Wed Aug 17 21:22:10 2011
DNS Servers: 192.168.1.254
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is off.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2011-08-16 21:24:16.
**** CD/DVD Drive Tests ****
LowerFilters: PxHelp20 (2.0.0.0), Afc (1.0.0.2),
UpperFilters: GEARAspiWDM (2.2.0.1),
D: TSSTcorp CD/DVDW TS-H552U, Rev US06
Audio CD in drive.
Found 12 songs on CD, playing time 51:48 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 02:44:68
Track 3, start time 07:07:08
Track 4, start time 11:12:72
Track 5, start time 15:30:35
Track 6, start time 20:39:22
Track 7, start time 25:50:40
Track 8, start time 28:54:65
Track 9, start time 33:01:69
Track 10, start time 38:22:40
Track 11, start time 41:58:62
Track 12, start time 45:58:43
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 40.
The drive CDRW speeds are: 40.
The drive DVDR speeds are: 40.
The drive DVDRW speeds are: 40.
**** Device Connectivity Tests ****
iPodService 10.4.0.80 is currently running.
iTunesHelper is currently not running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 82801FB/FBM USB Universal Host Controller - 2658. Device is working properly.
Intel(R) 82801FB/FBM USB Universal Host Controller - 2659. Device is working properly.
Intel(R) 82801FB/FBM USB Universal Host Controller - 265A. Device is working properly.
Intel(R) 82801FB/FBM USB Universal Host Controller - 265B. Device is working properly.
Intel(R) 82801FB/FBM USB2 Enhanced Host Controller - 265C. Device is working properly.
FireWire (IEEE 1394) Host Controllers:
Texas Instruments OHCI Compliant IEEE 1394 Host Controller. Device is working properly.
Most Recent Devices Not Currently Connected:
iPhone 4 (GSM) running firmware version 4.3.3
Serial Number: 86*********
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.
Any help much appreciated! -
A required iTunes component is not installed 42404 with iTunes 10 after update
Hi,
So I updated last night to the latest iTunes and now whenever I start the program I get this error:
A required iTunes component is not installed... - 42404...
I've tried uninstalling and deleting the iTunes preferences but it keeps on popping up. I can't sync my iPhone with it like this. Should I reinstall the Mobile Device stuff?
ThanksSometimes this one indicates that your FairPlay is broken, but other components might be dodgy.
Let's try a complete uninstall/reinstall as per the following document:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
Does that help with your 42404? -
I recently downloaded and installed the latest version of iTunes and now keep getting the error message "A required iTunes component is not installed. Please re-install iTunes (-42404)".
Since this, my iPad will not sync, despite resetting it many times.
I have downloaded and installed the new iTunes more than ten times with no luck.
Please can anyone help!!!!!!!Let's try a repair install of iTunes first.
Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "iTunes" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "iTunes", click "Change" and then click "Repair".
Can you launch your iTunes now? -
When I started up itunes on my PC I get this error: a required itunes component is not installed. please repair or reinstall ituens (-42404). How can I fixed this? I uninstalled it at least 6 times. Not exactly sure what I'm suppose to repair either. It also says it is syncing my ipod but when I go to disconnect/eject my ipod it says that it is unable to disconnect because files are being used in a program. When it finally disconnects there is no music on my ipod. The gym just ***** with out my ipod. Makes it eiser to not go! Someone please help me!
Use the instructions here to completely remove/uinstall all iTunes/Apple software and componenets and then start from scratch.
http://support.apple.com/kb/HT1923
B-rock -
JAVA beans and JAVA related services require Oracle client to be installed?
Can you please advice whether an application server that make use of JAVA beans and JAVA related services require Oracle client to be installed? For an example if the solution build based on Java and JBOSS to be used as application server, do we still require oracle client to be installed and configure the tnsnames in order to communicate to database server?
SHANOJ wrote:
Can you please advice whether an application server that make use of JAVA beans and JAVA related services require Oracle client to be installed? For an example if the solution build based on Java and JBOSS to be used as application server, do we still require oracle client to be installed and configure the tnsnames in order to communicate to database server?Oracle client is not required when JDBC is used to connect to the remote DB
Maybe you are looking for
-
Error -5000 and: Error when loading the transcode setting
For a couple of days I've been trying to export my project on a DVD, but on the half way of the transcoding it comes the Error -5000, and then there is such a message, something about the navigation, can't be found etc... I work on a mac OS X, using
-
Line of copy at top of photo in burned dvd at intervals.
I did a slide show in Iphoto. Added some text slides for birthdays. The I shared to IDVD and after reviewing the settings burned the DVD. I get the following line at the top of the first slide and it pops up periodically during the slide show on t
-
Is there a way to stop my podcasts from showing up under "albums" and "songs" on my iPod? My video podcasts are also showing up it "podcasts" under music. I'd be much happier if they were all in the right place. Can anybody help? Thanks.
-
I just upgraded my old Ipad 2 to the new IOS and am totally confused. Before if I tapped the button on the outside frame then all my open applications would show in the bottom of the screen and I could tap them to close them. How do I get applicati
-
Validation for select at least one
Hi, I have a table which is sortable and selectable, now I want to put select at least one row for any action. As these checkboxes are dynamically coming, I can't get the handle for them. How to go about this please help. IDMNovice