Do we require to install ADF on weblogic for ADF applications

Hi All,
For deploying and running ADF applications do we require to install ADF on weblogic? Can only weblogic installation domain be used to deploy and run ADF applications or we have to install ADF on top of weblogic installation for deplying and running ADF applications?
Please guide!!

Roshni,
You may have to install Application Development Runtime.
The detailed instructions are available here.. http://www.oracle.com/webfolder/technetwork/jdeveloper/howto/11114/managedserver/wlsadfms.html

Similar Messages

  • Version compatibility for installing WLS and ADR for ADF 11.1.2.0

    Hi,
    Can anyone pls let me know what versions of Weblogic server, Application Development Runtime (ADR) is required to install Oracle JDeveloper 11.1.2.0
    B'coz currently I am trying to install Weblogic server, ADR and ADF separately and try to deploy and publish an application in ADF 11.1.2.0 verison.
    I am trying this for the past 4 days, but still can't deploy an application successfully in ADF 11.1.2.0 version. Pls let me know the version compatibility.
    Thanks,
    Aparna

    Hi John,
    Even I saw the link that u had mentioned. From where can I install these ?
    I had downloaded WLS 10.3.5 and ADR 11.1.1.5 separately. But from where do I install the patch ?? I didn't find a proper source to download.
    Pls help.
    Thanks,
    Aparna

  • Hareware requirements to install 9iAS on AIX for 900 users

    Hi All,
    what is the discoverer server capability on AIX box? In other words, How much load 9iAS i.e apache server and application server can bear on AIX box?
    I need this information ASAP since we are going to install 9i AS on AIX and the concurrent users could be between 250 to 900.This is a dedicated box so, i would like to know hardware requirements for the above mentioned no. of users.
    Any help highly appriciated.
    Manu

    Has anyone tried 9i AS any release on 5L? Specifically AIX 5.2?
    When will AIX 5.2 for 9i AS be certified?
    Regards
    Fredrik

  • Facing problem in installing certificate on Weblogic for the SSL

    I am doing the setup for secure socket layer(SSL) in weblogic server
    .I
    have created the certificate which need for ssl by using the Openssl ,
    after
    that I entered path for all the file relate to setup by using the
    weblogic
    console. Once I have complete all this entries, I restarted the server ,
    at
    the time of restart its giving the following error. I am also sending
    the
    screen short of console and the log files as an attachment.
    <Feb 4, 2002 4:45:46 PM GMT-05:00> <Alert> <WebLogicServer> <Security
    configuration problem with certificat
    e file config/cauvery-key.pem, java.io.EOFException>
    java.io.EOFException
    at weblogic.security.Utils.inputByte(Utils.java:133)
    at
    weblogic.security.ASN1.ASN1Header.inputTag(ASN1Header.java:125)
    at weblogic.security.ASN1.ASN1Header.input(ASN1Header.java:119)
    at weblogic.security.RSAPrivateKey.input(RSAPrivateKey.java:119)
    at weblogic.security.RSAPrivateKey.<init>(RSAPrivateKey.java:91)
    at
    weblogic.t3.srvr.SSLListenThread.<init>(SSLListenThread.java:397)
    at
    weblogic.t3.srvr.SSLListenThread.<init>(SSLListenThread.java:300)
    at
    weblogic.t3.srvr.T3Srvr.initializeListenThreads(T3Srvr.java:1039)
    at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:475)
    at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:197)
    at weblogic.Server.main(Server.java:35)
    <Feb 4, 2002 4:45:58 PM GMT-05:00> <Notice> <Management> <Starting
    discovery
    of Managed Server... This feat
    Please help us to solve this problem

    Hi.
    Try posting this question in the security newsgroup.
    Thanks,
    Michael
    Ankur wrote:
    I am doing the setup for secure socket layer(SSL) in weblogic server
    I
    have created the certificate which need for ssl by using the Openssl ,
    after
    that I entered path for all the file relate to setup by using the
    weblogic
    console. Once I have complete all this entries, I restarted the server ,
    at
    the time of restart its giving the following error. I am also sending
    the
    screen short of console and the log files as an attachment.
    <Feb 4, 2002 4:45:46 PM GMT-05:00> <Alert> <WebLogicServer> <Security
    configuration problem with certificat
    e file config/cauvery-key.pem, java.io.EOFException>
    java.io.EOFException
    at weblogic.security.Utils.inputByte(Utils.java:133)
    at
    weblogic.security.ASN1.ASN1Header.inputTag(ASN1Header.java:125)
    at weblogic.security.ASN1.ASN1Header.input(ASN1Header.java:119)
    at weblogic.security.RSAPrivateKey.input(RSAPrivateKey.java:119)
    at weblogic.security.RSAPrivateKey.<init>(RSAPrivateKey.java:91)
    at
    weblogic.t3.srvr.SSLListenThread.<init>(SSLListenThread.java:397)
    at
    weblogic.t3.srvr.SSLListenThread.<init>(SSLListenThread.java:300)
    at
    weblogic.t3.srvr.T3Srvr.initializeListenThreads(T3Srvr.java:1039)
    at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:475)
    at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:197)
    at weblogic.Server.main(Server.java:35)
    <Feb 4, 2002 4:45:58 PM GMT-05:00> <Notice> <Management> <Starting
    discovery
    of Managed Server... This feat
    Please help us to solve this problem--
    Michael Young
    Developer Relations Engineer
    BEA Support

  • How to configure SSL in standalone weblogic server for ADF apps

    Hello,
    I'm new to weblogic, Could anyone provide documentation/blog references to configuring SSL in weblogic for adf application. Currently adf application deploys on http I need it to deploy as https.
    Appreciate your response
    Thanks and Regards

    Expand Environment > Click on Server > Click on Keystores Tab
    Under Keystores you have some options like DemoIdentity & Demo Trust.
    If u want to use the default keystores, you dont have to modify these configuations.
    Just enable SSL and specify the listen port.
    Expand Environment > Click on Server > General
    SSL Listen Port Enabled
    SSL Listen Port:
    If u want to use your own keystore Select Custom Identity and Custom Trust besides Keystores Drop Down and specify the require values.
    If u need any clarification let me knw.
    HTH,
    Faisal
    http://download-llnw.oracle.com/docs/cd/E11035_01/wls100/secmanage/ssl.html

  • Issue while installing FatWire on weblogic server

    I was trying to install CS with Weblogic as the Application server.
    During the installation of CS, I faced an issue while integrating with LDAP. In log it showed "Could not connect to the application server.Error in creating LDIF file.
    I had given the valid credentials.
    Have anyone faced this issue previously, if so please guide me thorugh.
    And also, Is it mandatory to use LDAP ?
    Thanks,
    Rahul Nair

    It sounds like the application server was turned off whilst you were running the LDAP configuration tool. The tool needs the application server to be running.
    It's not mandatory to have LDAP integration with CS, from what I have seen most existing customers don't use it. There are also some performance benefits to avoiding LDAP integration.
    If you do want LDAP integration then you don't need to configure it immediately after install. The LDAP configuration tool can be run separately, e.g. after you are happy the fresh install is working as expected.
    Phil

  • ADF on WebLogic 12c 12.1.2 requires a database

    hi
    Some recent forum messages suggest that ADF on WebLogic 12c 12.1.2 requires a database :
    at https://forums.oracle.com/message/11104301#11104301
    "BrianFry wrote:
    ... The JRF domain template is the one that contains ADF libraries, so to configure standalone WLS with ADF, you need to use the JRF template. As you've discovered, the JRF template has a dependency in 12.1.2 on the Coherence template, so you get that one too. In 12.1.2, the WLS infrastructure with JRF and Coherence also requires a database connection and to have RCU installed. You should run RCU prior to running the config wizard. ..."
    and also at https://forums.oracle.com/message/11105901#11105901
    The blog post "Setting up a standalone WebLogic 12c install for ADF Without a Database" by Duncan Mills
    at https://blogs.oracle.com/groundside/entry/setting_up_a_standalone_weblogic
    explicitly says "... I stress this is not a supported configuration for production usage ...".
    The same blog post also includes some explanation :
    "... Now this connection has a real purpose, the Oracle Platform security infrastructure for 12c needs to store it's information within a proper database so as to correctly (and supportably) manage itself across multiple servers in a cluster. ..."
    Has this requirement (the required database) been documented somewhere?
    How many database connections are expected to be used by this "feature" (per managed-server, per user-session, per ...)?
    What about this requirement if you don't have a WebLogic Server cluster (but maybe some managed-servers behind a load-balancer)?
    many thanks
    Jan Vervecken

    subscribed.

  • Oracle.adf.share.weblogic.listeners.ADFApplicationLifecycleListener

    I am getting classnotFounException when deploy application on stand alone Weblogic.
    1. I Install WLS 10.3.5
    2. I Install ADF library using jdeveloperstudio1112 installer.
    3. Create domain and configure use jrf 11.1.1 librarys using wizard
    4. Using wizard i define servers, machines and add librarys to servers..
    When i test i can deploy application well in admin server but in other server i create i am getting
    classnotFoundException oracle.adf.share.weblogic.listeners.ADFApplicationLifecycleListener
    I check on forum and find many topics about this...
    I try this answers:
    http://remcodeblok.blogspot.com/2009/03/howto-run-adf-with-node-manager.html
    Standalone WLS deployment failure - incorrect weblogic-application.xml
    but nothing seems to fix the error....
    I am wonder if i am doing something wrong.. i have instaled weblogic 10.3.1 many times and didnt get errors like this..
    Help

    Well, both threads are for older versions, the problems described there are solved by now.
    All I had to do is the second solution from the first thread (change nodemanger properties).
    Then start the node manager, then the admin server. The first time you need to start the managed server via the admin console. After shutting down everything and starting again all servers are OK.
    Have you checked that the Ast libraries targeted to your managed server?
    Timo

  • Install EM in weblogic 10.3.4

    Hello.
    Is possible install EM in weblogic when it have adf runtime installed (installed adf runtime from jdeveloper)?
    Regards, Marcelo

    Hi Marcelo
    If you want to install Enterprise Manager (EM), first you need to install a full blow SOA/BPM Software on top of your existing Weblogic Server installation. EM is part of Oracles SOA Fusion Middleware and this EM admin console is mainly used to adminster all the soa fusion middleware stuff like soa, bpm, bi, etc etc and they mostly refer to soa servers.
    By default, for adf applications all you need is just pure Weblogic Server and there is no need of any SOA/BPM Software. But if you really need EM, then you need this SOA/BPM. Now remember that SOA/BPM license are different and you had to pay for this software in addition to your weblogic license.
    Once you install SOA/BPM on top of Weblogic Server. You use Config Wizard, create a Domain, and at this point, you select one more project facet named something like "Oracle Enterprise Manager ....". And you can access this EM using http://adminhost:adminport/em. And use same admin privileges of console.
    Just curious, why you need EM for adf applications running on your weblogic server.
    Thanks
    Ravi Jegga

  • Weblogic production cluster: how to configure it for ADF, ADF Faces, BC?

    Given a production ready cluster of Weblogic 10.2. What should I do to convert it an ADF ready weblogic server ? How to make it as usable for ADF as the integrated weblogic in jdeveloper?
    any official guide from Oracle ?
    thanks,
    fabio

    For WLS 11g (aka 10.3.x) you must install the Application Development Runtime (get it from here http://www.oracle.com/technology/software/products/middleware/htdocs/fmw_11_download.html) and extend your existing domains.
    Check the Installation Guides first: http://download.oracle.com/docs/cd/E14571_01/install.htm
    --olaf                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • What is the minimum client requirement for ADF Application?

    Dear All,
    What is the minimum client hardware and software requirement for ADF Application?
    Operation System, Web Browser etc...
    Thank you,

    Presumably you mean for delivering ADF applications across the web to client PCs. As far as I know there's no hardware requirements. However you can find the browser certification matrix in the following link:
    http://www.oracle.com/technetwork/developer-tools/jdev/index-091111.html
    Alternatively by "client" you mean a developer PC's hardware/software requirements to run the JDev IDE, the following link gives more information: http://download.oracle.com/docs/cd/E17904_01/install.1111/e13666/ojdig.htm#BDCDAGAH
    CM.

  • Problem to deploy to a WebService interface for ADF Business Components to Weblogic Server

    Hi,
      I'm trying to deploy a custom application ,in which i have exposed ADF Business Components through a WebService interface, to a standalone weblogic server.
    Application Module is configured with a Service Interface for ordinary ViewObjects.
    Now I want to create a EAR file of this application to deploy it on the weblogic server.
    But I got an error while deploying it.The error i am getting is shown below.
    ERROR: No Java EE modules detected in EAR archive. Deployment aborted. == (oracle.jdevimpl.deploy.ear.WeblogicAssembler)
    I have followed the steps mention in the below link :
    http://technology.amis.nl/2010/12/29/quickly-creating-reploying-and-testing-a-webservice-interface-for-adf-business-components/
    I'm using Jdeveloper 11.1.2.4 on windows.
    Please suggest what i could be doing wrong.
    Regards,
    Himanshu

    Does the deployment profile include Java EE modules?
    Refer
    Java EE Developer: ERROR: No j2ee modules detected in EAR archive. Deployment aborted. == (oracle.jdeveloper.deploy.Veto…

  • When attempting install of iTunes 10.5 for Windows 7 on Parallels 7, I get a message saying,  "A program required to install cannot be run. Contact the package vendor or sys admin" (that's me).  I completely uninstalled the previous iTunes prior to this.

    When attempting install of iTunes 10.5 for Windows 7 on Parallels 7, I get a message saying,  "A program required to install cannot be run. Contact the package vendor or sys admin" (that's me).  I completely uninstalled the previous iTunes prior to this.  Any thoughts?

    Try the following user tip:
    "There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

  • Using EJB with Hibernate on Weblogic Server ADF platform

    Hi all,
    We use Jdeveloper 11.1.1.4 and WLS 10.3
    I tried to use Hibernate on my project according to this link well, EJB with Hibernate On Weblogic
    I wanto use Hibernate tool because toplink and eclipselink can not achieve the issue about generating update* ddl on schema, they can just only re-create the tables -not real update.
    Firstly i got the related jars from internet: http://www.2hotfile.com/di-LSBU.png
    cglib-2.2
    antlr-2.7.6
    commons-collections-3.1
    dom4j-1.6.1
    hibernate3
    hibernate-validator-4.1.0.Final
    javassist-3.9.0.GA
    jta-1.1
    slf4j-api-1.5.11
    slf4j-nop-1.5.11
    Then i added to model project as library dependencies: http://www.2hotfile.com/di-GMSZ.png
    configured persistence.xml as below:
    <?xml version="1.0" encoding="windows-1252" ?>
    <persistence xmlns="http://java.sun.com/xml/ns/persistence"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xsi:schemaLocation="http://java.sun.com/xml/ns/persistence http://java.sun.com/xml/ns/persistence/persistence_2_0.xsd"
    version="1.0">
    <persistence-unit name="VakkoEJBModel" transaction-type="RESOURCE_LOCAL">
    <provider>org.hibernate.ejb.HibernatePersistence</provider>
    <jta-data-source>jdbc/VakkoDS</jta-data-source>
    <properties>
    <property name="hibernate.jndi.url" value="t3://127.0.0.1:7001" />
    <property name="hibernate.connection.datasource" value="jdbc/VakkoDS" />
    <property name="hibernate.transaction.manager_lookup_class" value="org.hibernate.transaction.WeblogicTransactionManagerLookup" />
    <property name="hibernate.dialect" value="org.hibernate.dialect.Oracle10gDialect" />
    <property name="hibernate.hbm2ddl.auto" value="update" />
    <property name="hibernate.current_session_context_class" value="jta" />
    </properties>
    </persistence-unit>
    </persistence>
    weblogic-application.xml
    <?xml version="1.0" encoding="ISO-8859-1"?>
    <weblogic-application>
    <prefer-application-packages>
    <package-name>antlr.*</package-name>
    <package-name>org.hibernate.*</package-name>
    <!-- package-name>org.apache.commons.logging.*</package-name -->
    <!-- package-name>org.w3c.dom.*</package-name -->
    </prefer-application-packages>
    </weblogic-application>
    weblogic-ejb-jar.xml
    <?xml version = '1.0' encoding = 'UTF-8'?>
    <weblogic-ejb-jar xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xsi:schemaLocation="http://www.bea.com/ns/weblogic/weblogic-ejb-jar http://www.bea.com/ns/weblogic/weblogic-ejb-jar/1.0/weblogic-ejb-jar.xsd"
    xmlns="http://www.bea.com/ns/weblogic/weblogic-ejb-jar">
    </weblogic-ejb-jar>
    ejb-jar.xml
    <?xml version="1.0" encoding="windows-1252" ?>
    <ejb-jar/>
    And i added to setDomainEnv.cmd that line:
    set EXT_PRE_CLASSPATH=C:\jarlar\hibernate-3.3.2\antlr-2.7.6.jar;C:\jarlar\hibernate-3.3.2\commons-collections-3.1.jar;C:\jarlar\hibernate-3.3.2\dom4j-1.6.1.jar;C:\jarlar\hibernate-3.3.2\hibernate3.jar;C:\jarlar\hibernate-3.3.2\javassist-3.9.0.GA.jar;C:\jarlar\hibernate-3.3.2\jta-1.1.jar;C:\jarlar\hibernate-3.3.2\slf4j-api-1.5.11.jar;C:\jarlar\hibernate-3.3.2\slf4j-nop-1.5.11.jar;C:\jarlar\hibernate-3.3.2\bytecode\cglib\cglib-2.2.jar;C:\Oracle\Middleware_11.1.1.4\modules\ejb3-persistence-3.3.1.jar;hibernate-validator-4.1.0.Final.jar;
    deployment profile could be seen by clicking those links:
    http://www.2hotfile.com/di-XV68.png
    http://www.2hotfile.com/di-8YC9.png
    http://www.2hotfile.com/di-ADR4.png
    And i tried to manipulate the ear file contents according to these informations: http://middlewaremagic.com/weblogic/wp-content/uploads/2010/06/EAR_Application_Diagram.jpg
    under ear\META-INF\application.xml
    <?xml version = '1.0' encoding = 'windows-1252'?>
    <application xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/application_5.xsd" version="5" xmlns="http://java.sun.com/xml/ns/javaee">
    <display-name>ejb1</display-name>
    <module>
    <ejb>ejb1.jar</ejb>
    </module>
    </application>
    under ear\META-INF\weblogic-application.xml
    <?xml version = '1.0' encoding = 'windows-1254'?>
    <weblogic-application xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.bea.com/ns/weblogic/weblogic-application http://www.bea.com/ns/weblogic/weblogic-application/1.0/weblogic-application.xsd" xmlns="http://www.bea.com/ns/weblogic/weblogic-application">
    <prefer-application-packages>
    <package-name>org.hibernate.*</package-name>
    <package-name>antlr.*</package-name>
    <!-- package-name>org.apache.commons.logging.*</package-name -->
    <!-- package-name>org.w3c.dom.*</package-name -->
    </prefer-application-packages>
    <listener>
    <listener-class>oracle.adf.share.weblogic.listeners.ADFApplicationLifecycleListener</listener-class>
    </listener>
    <listener>
    <listener-class>oracle.mds.lcm.weblogic.WLLifecycleListener</listener-class>
    </listener>
    <library-ref>
    <library-name>adf.oracle.domain</library-name>
    </library-ref>
    </weblogic-application>
    The files which existed in ejb1.ear\ejb1.jar\META-INF\ directory same with source folder of model project (these were created by jdeveloper deployment process according to deployment profile which previously explaint)
    ear contents shown that link : http://www.2hotfile.com/di-23X6.png
    When i deploy the project to weblogic by using JDeveloper or http://127.0.0.1:7101/console/ method. But occured exception
    <10-Dec-2012 16:31:54 o'clock EET> <Warning> <netuix> <BEA-423420> <Redirect is executed in begin or refresh action. Redirect url is /console/console.portal?_nfpb=true&_pageLabel=AppDeploymentsControlPage.>
    <10-Dec-2012 16:32:45 o'clock EET> <Error> <Deployer> <BEA-149265> <Failure occurred in the execution of deployment request with ID '1355149965087' for task '2'. Error is: 'weblogic.application.ModuleException: Exception preparing module: EJBModule(ejb1.jar)
    weblogic.application.ModuleException: Exception preparing module: EJBModule(ejb1.jar)
         at weblogic.ejb.container.deployer.EJBModule.prepare(EJBModule.java:469)
         at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
         at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:517)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:159)
         Truncated. see log file for complete stacktrace
    Caused By: weblogic.deployment.EnvironmentException: Error processing persistence unit VakkoEJBModel of module ejb1.jar: Error instantiating the Persistence Provider class org.hibernate.ejb.HibernatePersistence of the PersistenceUnit VakkoEJBModel: java.lang.ClassNotFoundException: org.hibernate.ejb.HibernatePersistence
         at weblogic.deployment.BasePersistenceUnitInfoImpl.getPersistenceProvider(BasePersistenceUnitInfoImpl.java:375)
         at weblogic.deployment.BasePersistenceUnitInfoImpl.initializeEntityManagerFactory(BasePersistenceUnitInfoImpl.java:393)
         at weblogic.deployment.BasePersistenceUnitInfoImpl.initializeEntityManagerFactory(BasePersistenceUnitInfoImpl.java:386)
         at weblogic.deployment.BasePersistenceUnitInfoImpl.<init>(BasePersistenceUnitInfoImpl.java:158)
         at weblogic.deployment.PersistenceUnitInfoImpl.<init>(PersistenceUnitInfoImpl.java:39)
         Truncated. see log file for complete stacktrace
    >
    <10-Dec-2012 16:32:45 o'clock EET> <Warning> <Deployer> <BEA-149004> <Failures were detected while initiating deploy task for application 'ejb1'.>
    <10-Dec-2012 16:32:45 o'clock EET> <Warning> <Deployer> <BEA-149078> <Stack trace for message 149004
    weblogic.application.ModuleException: Exception preparing module: EJBModule(ejb1.jar)
         at weblogic.ejb.container.deployer.EJBModule.prepare(EJBModule.java:469)
         at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
         at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:517)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:159)
         Truncated. see log file for complete stacktrace
    Caused By: weblogic.deployment.EnvironmentException: Error processing persistence unit VakkoEJBModel of module ejb1.jar: Error instantiating the Persistence Provider class org.hibernate.ejb.HibernatePersistence of the PersistenceUnit VakkoEJBModel: java.lang.ClassNotFoundException: org.hibernate.ejb.HibernatePersistence
         at weblogic.deployment.BasePersistenceUnitInfoImpl.getPersistenceProvider(BasePersistenceUnitInfoImpl.java:375)
         at weblogic.deployment.BasePersistenceUnitInfoImpl.initializeEntityManagerFactory(BasePersistenceUnitInfoImpl.java:393)
         at weblogic.deployment.BasePersistenceUnitInfoImpl.initializeEntityManagerFactory(BasePersistenceUnitInfoImpl.java:386)
         at weblogic.deployment.BasePersistenceUnitInfoImpl.<init>(BasePersistenceUnitInfoImpl.java:158)
         at weblogic.deployment.PersistenceUnitInfoImpl.<init>(PersistenceUnitInfoImpl.java:39)
         Truncated. see log file for complete stacktrace
    >
    <10-Dec-2012 16:32:45 o'clock EET> <Error> <Console> <BEA-240003> <Console encountered the following error weblogic.application.ModuleException: Exception preparing module: EJBModule(ejb1.jar)
         at weblogic.ejb.container.deployer.EJBModule.prepare(EJBModule.java:469)
         at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
         at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:517)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:159)
         at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:45)
         at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:613)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:184)
         at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:58)
         at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)
         at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
         at weblogic.deploy.internal.targetserver.operations.ActivateOperation.createAndPrepareContainer(ActivateOperation.java:207)
         at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doPrepare(ActivateOperation.java:98)
         at weblogic.deploy.internal.targetserver.operations.AbstractOperation.prepare(AbstractOperation.java:217)
         at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentPrepare(DeploymentManager.java:747)
         at weblogic.deploy.internal.targetserver.DeploymentManager.prepareDeploymentList(DeploymentManager.java:1216)
         at weblogic.deploy.internal.targetserver.DeploymentManager.handlePrepare(DeploymentManager.java:250)
         at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.prepare(DeploymentServiceDispatcher.java:159)
         at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doPrepareCallback(DeploymentReceiverCallbackDeliverer.java:171)
         at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$000(DeploymentReceiverCallbackDeliverer.java:13)
         at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$1.run(DeploymentReceiverCallbackDeliverer.java:46)
         at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
    Caused by: weblogic.deployment.EnvironmentException: Error processing persistence unit VakkoEJBModel of module ejb1.jar: Error instantiating the Persistence Provider class org.hibernate.ejb.HibernatePersistence of the PersistenceUnit VakkoEJBModel: java.lang.ClassNotFoundException: org.hibernate.ejb.HibernatePersistence
         at weblogic.deployment.BasePersistenceUnitInfoImpl.getPersistenceProvider(BasePersistenceUnitInfoImpl.java:375)
         at weblogic.deployment.BasePersistenceUnitInfoImpl.initializeEntityManagerFactory(BasePersistenceUnitInfoImpl.java:393)
         at weblogic.deployment.BasePersistenceUnitInfoImpl.initializeEntityManagerFactory(BasePersistenceUnitInfoImpl.java:386)
         at weblogic.deployment.BasePersistenceUnitInfoImpl.<init>(BasePersistenceUnitInfoImpl.java:158)
         at weblogic.deployment.PersistenceUnitInfoImpl.<init>(PersistenceUnitInfoImpl.java:39)
         at weblogic.deployment.AbstractPersistenceUnitRegistry.storeDescriptors(AbstractPersistenceUnitRegistry.java:349)
         at weblogic.deployment.AbstractPersistenceUnitRegistry.loadPersistenceDescriptor(AbstractPersistenceUnitRegistry.java:263)
         at weblogic.deployment.ModulePersistenceUnitRegistry.<init>(ModulePersistenceUnitRegistry.java:69)
         at weblogic.ejb.container.deployer.EJBModule.setupPersistenceUnitRegistry(EJBModule.java:223)
         at weblogic.ejb.container.deployer.EJBModule$1.execute(EJBModule.java:324)
         at weblogic.deployment.PersistenceUnitRegistryInitializer.setupPersistenceUnitRegistries(PersistenceUnitRegistryInitializer.java:62)
         at weblogic.ejb.container.deployer.EJBModule.prepare(EJBModule.java:393)
    What are my mistake/s or incompletes?
    Please help me and excuse my poor English. Thanks in advance

    Thanks again for your consideration.
    I double checked CLASSPATH. And seen starting wls with classpath which i defined, but no change about ecxeption.
    you can see wls starting classpath through the link: http://www.2hotfile.com/image.php?di=BQNE
    setDomainEnv.cmd
    @ECHO OFF
    @REM WARNING: This file is created by the Configuration Wizard.
    @REM Any changes to this script may be lost when adding extensions to this configuration.
    @REM *************************************************************************
    @REM This script is used to setup the needed environment to be able to start Weblogic Server in this domain.
    @REM
    @REM This script initializes the following variables before calling commEnv to set other variables:
    @REM
    @REM WL_HOME - The BEA home directory of your WebLogic installation.
    @REM JAVA_VM - The desired Java VM to use. You can set this environment variable before calling
    @REM this script to switch between Sun or BEA or just have the default be set.
    @REM JAVA_HOME - Location of the version of Java used to start WebLogic
    @REM Server. Depends directly on which JAVA_VM value is set by default or by the environment.
    @REM USER_MEM_ARGS - The variable to override the standard memory arguments
    @REM passed to java.
    @REM PRODUCTION_MODE - The variable that determines whether Weblogic Server is started in production mode.
    @REM DOMAIN_PRODUCTION_MODE
    @REM - The variable that determines whether the workshop related settings like the debugger,
    @REM testconsole or iterativedev should be enabled. ONLY settable using the
    @REM command-line parameter named production
    @REM NOTE: Specifying the production command-line param will force
    @REM the server to start in production mode.
    @REM
    @REM Other variables used in this script include:
    @REM SERVER_NAME - Name of the weblogic server.
    @REM JAVA_OPTIONS - Java command-line options for running the server. (These
    @REM will be tagged on to the end of the JAVA_VM and
    @REM MEM_ARGS)
    @REM
    @REM For additional information, refer to "Managing Server Startup and Shutdown for Oracle WebLogic Server"
    @REM (http://download.oracle.com/docs/cd/E17904_01/web.1111/e13708/overview.htm).
    @REM *************************************************************************
    set COMMON_COMPONENTS_HOME=C:\Oracle\Middleware_11.1.1.4\oracle_common
    for %%i in ("%COMMON_COMPONENTS_HOME%") do set COMMON_COMPONENTS_HOME=%%~fsi
    @REM C:\jarlar\hibernate-3.3.2\antlr-2.7.6.jar;C:\jarlar\hibernate-3.3.2\commons-collections-3.1.jar;C:\jarlar\hibernate-3.3.2\dom4j-1.6.1.jar;C:\jarlar\hibernate-3.3.2\hibernate3.jar;C:\jarlar\hibernate-3.3.2\javassist-3.9.0.GA.jar;C:\jarlar\hibernate-3.3.2\jta-1.1.jar;C:\jarlar\hibernate-3.3.2\slf4j-api-1.5.11.jar;C:\jarlar\hibernate-3.3.2\slf4j-nop-1.5.11.jar;C:\jarlar\hibernate-3.3.2\bytecode\cglib\cglib-2.2.jar;C:\Oracle\Middleware_11.1.1.4\modules\ejb3-persistence-3.3.1.jar;hibernate-validator-4.1.0.Final.jar;
    set CLASSPATH=C:\jarlar\hibernate-3.3.2\antlr-2.7.6.jar;C:\jarlar\hibernate-3.3.2\commons-collections-3.1.jar;C:\jarlar\hibernate-3.3.2\dom4j-1.6.1.jar;C:\jarlar\hibernate-3.3.2\hibernate3.jar;C:\jarlar\hibernate-3.3.2\javassist-3.9.0.GA.jar;C:\jarlar\hibernate-3.3.2\jta-1.1.jar;C:\jarlar\hibernate-3.3.2\slf4j-api-1.5.11.jar;C:\jarlar\hibernate-3.3.2\slf4j-nop-1.5.11.jar;C:\jarlar\hibernate-3.3.2\bytecode\cglib\cglib-2.2.jar;C:\Oracle\Middleware_11.1.1.4\modules\ejb3-persistence-3.3.1.jar;hibernate-validator-4.1.0.Final.jar;%CLASSPATH%;
    set WC_ORACLE_HOME=C:\Oracle\Middleware_11.1.1.4\jdeveloper
    set PORTLET_ORACLE_HOME=C:\Oracle\Middleware_11.1.1.4\jdeveloper
    set WC_ORACLE_HOME=C:\Oracle\Middleware_11.1.1.4\jdeveloper
    set WL_HOME=C:\Oracle\Middleware_11.1.1.4\wlserver_10.3
    for %%i in ("%WL_HOME%") do set WL_HOME=%%~fsi
    set BEA_JAVA_HOME=
    set SUN_JAVA_HOME=C:\Program Files\Java\jdk1.6.0_30x64
    if "%JAVA_VENDOR%"=="Oracle" (
         set JAVA_HOME=%BEA_JAVA_HOME%
    ) else (
         if "%JAVA_VENDOR%"=="Sun" (
              set JAVA_HOME=%SUN_JAVA_HOME%
         ) else (
              set JAVA_VENDOR=Sun
              set JAVA_HOME=C:\Program Files\Java\jdk1.6.0_30x64
              @REM set JAVA_HOME=C:\Oracle\Middleware_11.1.1.4\jdk160_21
    @REM We need to reset the value of JAVA_HOME to get it shortened AND
    @REM we can not shorten it above because immediate variable expansion will blank it
    set JAVA_HOME=%JAVA_HOME%
    for %%i in ("%JAVA_HOME%") do set JAVA_HOME=%%~fsi
    set SAMPLES_HOME=%WL_HOME%\samples
    set DOMAIN_HOME=C:\Users\Dijitaluser\AppData\Roaming\JDeveloper\system11.1.1.4.37.59.23\DefaultDomain
    for %%i in ("%DOMAIN_HOME%") do set DOMAIN_HOME=%%~fsi
    set LONG_DOMAIN_HOME=C:\Users\Dijitaluser\AppData\Roaming\JDeveloper\system11.1.1.4.37.59.23\DefaultDomain
    if "%DEBUG_PORT%"=="" (
         set DEBUG_PORT=8453
    if "%SERVER_NAME%"=="" (
         set SERVER_NAME=DefaultServer
    set DERBY_FLAG=false
    set enableHotswapFlag=
    set PRODUCTION_MODE=
    set doExitFlag=false
    set verboseLoggingFlag=false
    for %%p in (%*) do call :SET_PARAM %%p
    GOTO :CMD_LINE_DONE
         :SET_PARAM
         for %%q in (%1) do set noQuotesParam=%%~q
         if /i "%noQuotesParam%" == "nodebug" (
              set debugFlag=false
              GOTO :EOF
         if /i "%noQuotesParam%" == "production" (
              set DOMAIN_PRODUCTION_MODE=true
              GOTO :EOF
         if /i "%noQuotesParam%" == "notestconsole" (
              set testConsoleFlag=false
              GOTO :EOF
         if /i "%noQuotesParam%" == "noiterativedev" (
              set iterativeDevFlag=false
              GOTO :EOF
         if /i "%noQuotesParam%" == "noLogErrorsToConsole" (
              set logErrorsToConsoleFlag=false
              GOTO :EOF
         if /i "%noQuotesParam%" == "noderby" (
              set DERBY_FLAG=false
              GOTO :EOF
         if /i "%noQuotesParam%" == "doExit" (
              set doExitFlag=true
              GOTO :EOF
         if /i "%noQuotesParam%" == "noExit" (
              set doExitFlag=false
              GOTO :EOF
         if /i "%noQuotesParam%" == "verbose" (
              set verboseLoggingFlag=true
              GOTO :EOF
         if /i "%noQuotesParam%" == "enableHotswap" (
              set enableHotswapFlag=-javaagent:%WL_HOME%\server\lib\diagnostics-agent.jar
              GOTO :EOF
         ) else (
              set PROXY_SETTINGS=%PROXY_SETTINGS% %1
         GOTO :EOF
    :CMD_LINE_DONE
    set MEM_DEV_ARGS=
    if "%DOMAIN_PRODUCTION_MODE%"=="true" (
         set PRODUCTION_MODE=%DOMAIN_PRODUCTION_MODE%
    if "%PRODUCTION_MODE%"=="true" (
         set debugFlag=false
         set testConsoleFlag=false
         set iterativeDevFlag=false
         set logErrorsToConsoleFlag=false
    @REM If you want to override the default Patch Classpath, Library Path and Path for this domain,
    @REM Please uncomment the following lines and add a valid value for the environment variables
    @REM set PATCH_CLASSPATH=[myPatchClasspath] (windows)
    @REM set PATCH_LIBPATH=[myPatchLibpath] (windows)
    @REM set PATCH_PATH=[myPatchPath] (windows)
    @REM PATCH_CLASSPATH=[myPatchClasspath] (unix)
    @REM PATCH_LIBPATH=[myPatchLibpath] (unix)
    @REM PATCH_PATH=[myPatchPath] (unix)
    call "%WL_HOME%\common\bin\commEnv.cmd"
    set WLS_HOME=%WL_HOME%\server
    set XMS_SUN_64BIT=256
    set XMS_SUN_32BIT=256
    set XMX_SUN_64BIT=512
    set XMX_SUN_32BIT=512
    set XMS_JROCKIT_64BIT=256
    set XMS_JROCKIT_32BIT=256
    set XMX_JROCKIT_64BIT=512
    set XMX_JROCKIT_32BIT=512
    if "%JAVA_VENDOR%"=="Sun" (
         set WLS_MEM_ARGS_64BIT=-Xms256m -Xmx600m -XX:PermSize=128M -XX:MaxPermSize=256M
         set WLS_MEM_ARGS_32BIT=-Xms256m -Xmx600m -XX:PermSize=128M -XX:MaxPermSize=256M
         echo this is suuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuun
    ) else (
         set WLS_MEM_ARGS_64BIT=-Xms256m -Xmx600m -XX:PermSize=128M -XX:MaxPermSize=256M
         set WLS_MEM_ARGS_32BIT=-Xms256m -Xmx600m -XX:PermSize=128M -XX:MaxPermSize=256M
         echo this is noooooooooooooooooooooooooooooooooooooooooooooooot sun
    if "%JAVA_VENDOR%"=="Oracle" (
         set CUSTOM_MEM_ARGS_64BIT=-Xms%XMS_JROCKIT_64BIT%m -Xmx%XMX_JROCKIT_64BIT%m
         set CUSTOM_MEM_ARGS_32BIT=-Xms%XMS_JROCKIT_32BIT%m -Xmx%XMX_JROCKIT_32BIT%m
    ) else (
         set CUSTOM_MEM_ARGS_64BIT=-Xms%XMS_SUN_64BIT%m -Xmx%XMX_SUN_64BIT%m
         set CUSTOM_MEM_ARGS_32BIT=-Xms%XMS_SUN_32BIT%m -Xmx%XMX_SUN_32BIT%m
    set MEM_ARGS_64BIT=%CUSTOM_MEM_ARGS_64BIT%
    set MEM_ARGS_32BIT=%CUSTOM_MEM_ARGS_32BIT%
    if "%JAVA_USE_64BIT%"=="true" (
         set MEM_ARGS=%MEM_ARGS_64BIT%
    ) else (
         set MEM_ARGS=%MEM_ARGS_32BIT%
    set MEM_PERM_SIZE_64BIT=-XX:PermSize=128m
    set MEM_PERM_SIZE_32BIT=-XX:PermSize=128m
    if "%JAVA_USE_64BIT%"=="true" (
         set MEM_PERM_SIZE=%MEM_PERM_SIZE_64BIT%
    ) else (
         set MEM_PERM_SIZE=%MEM_PERM_SIZE_32BIT%
    set MEM_MAX_PERM_SIZE_64BIT=-XX:MaxPermSize=512m
    set MEM_MAX_PERM_SIZE_32BIT=-XX:MaxPermSize=512m
    if "%JAVA_USE_64BIT%"=="true" (
         set MEM_MAX_PERM_SIZE=%MEM_MAX_PERM_SIZE_64BIT%
    ) else (
         set MEM_MAX_PERM_SIZE=%MEM_MAX_PERM_SIZE_32BIT%
    if "%JAVA_VENDOR%"=="Sun" (
         if "%PRODUCTION_MODE%"=="" (
              set MEM_DEV_ARGS=-XX:CompileThreshold=8000 %MEM_PERM_SIZE%
    @REM Had to have a separate test here BECAUSE of immediate variable expansion on windows
    if "%JAVA_VENDOR%"=="Sun" (
         set MEM_ARGS=%MEM_ARGS% %MEM_DEV_ARGS% %MEM_MAX_PERM_SIZE%
    if "%JAVA_VENDOR%"=="HP" (
         set MEM_ARGS=%MEM_ARGS% %MEM_MAX_PERM_SIZE%
    if "%JAVA_VENDOR%"=="Apple" (
         set MEM_ARGS=%MEM_ARGS% %MEM_MAX_PERM_SIZE%
    @REM IF USER_MEM_ARGS the environment variable is set, use it to override ALL MEM_ARGS values
    set USER_MEM_ARGS=-Xms256m -Xmx1024m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m
    if NOT "%USER_MEM_ARGS%"=="" (
         set MEM_ARGS=%USER_MEM_ARGS%
    set ORACLE_DOMAIN_CONFIG_DIR=%DOMAIN_HOME%\config\fmwconfig
    for %%i in ("%ORACLE_DOMAIN_CONFIG_DIR%") do set ORACLE_DOMAIN_CONFIG_DIR=%%~fsi
    set WLS_JDBC_REMOTE_ENABLED=-Dweblogic.jdbc.remoteEnabled=false
    if "%WC_OHOME_ARGUMENT%"=="" (
         set WC_OHOME_ARGUMENT=-Dwc.oracle.home=%WC_ORACLE_HOME%
         set EXTRA_JAVA_PROPERTIES=-Dwc.oracle.home=%WC_ORACLE_HOME% %EXTRA_JAVA_PROPERTIES%
    if "%PORTLET_OHOME_ARGUMENT%"=="" (
         set PORTLET_OHOME_ARGUMENT=-Dportlet.oracle.home=%PORTLET_ORACLE_HOME%
         set EXTRA_JAVA_PROPERTIES=-Dportlet.oracle.home=%PORTLET_ORACLE_HOME% %EXTRA_JAVA_PROPERTIES%
    if "%WC_OHOME_ARGUMENT%"=="" (
         set WC_OHOME_ARGUMENT=-Dwc.oracle.home=%WC_ORACLE_HOME%
         set EXTRA_JAVA_PROPERTIES=-Dwc.oracle.home=%WC_ORACLE_HOME% %EXTRA_JAVA_PROPERTIES%
    set JAVA_PROPERTIES=-Dplatform.home=%WL_HOME% -Dwls.home=%WLS_HOME% -Dweblogic.home=%WLS_HOME%
    set ALT_TYPES_DIR=%COMMON_COMPONENTS_HOME%\modules\oracle.ossoiap_11.1.1,%COMMON_COMPONENTS_HOME%\modules\oracle.oamprovider_11.1.1
    set PROTOCOL_HANDLERS=oracle.mds.net.protocol
    if "%JAVA_VENDOR%"=="Sun" (
         set EXTRA_JAVA_PROPERTIES=-XX:+UseParallelGC -XX:+DisableExplicitGC %EXTRA_JAVA_PROPERTIES%
    ) else (
         if "%JAVA_VENDOR%"=="Oracle" (
              set EXTRA_JAVA_PROPERTIES=-Djrockit.codegen.newlockmatching=true %EXTRA_JAVA_PROPERTIES%
         ) else (
              set EXTRA_JAVA_PROPERTIES=-XX:+UseParallelGC -XX:+DisableExplicitGC %EXTRA_JAVA_PROPERTIES%
    set PROTOCOL_HANDLERS=%PROTOCOL_HANDLERS:;="|"%
    @REM To use Java Authorization Contract for Containers (JACC) in this domain,
    @REM please uncomment the following section. If there are multiple machines in
    @REM your domain, be sure to edit the setDomainEnv in the associated domain on
    @REM each machine.
    @REM
    @REM -Djava.security.manager
    @REM -Djava.security.policy=location of weblogic.policy
    @REM -Djavax.security.jacc.policy.provider=weblogic.security.jacc.simpleprovider.SimpleJACCPolicy
    @REM -Djavax.security.jacc.PolicyConfigurationFactory.provider=weblogic.security.jacc.simpleprovider.PolicyConfigurationFactoryImpl
    @REM -Dweblogic.security.jacc.RoleMapperFactory.provider=weblogic.security.jacc.simpleprovider.RoleMapperFactoryImpl
    set EXTRA_JAVA_PROPERTIES=-Doracle.webcenter.tagging.scopeTags=false %EXTRA_JAVA_PROPERTIES%
    set EXTRA_JAVA_PROPERTIES=-Doracle.webcenter.analytics.disable-native-partitioning=false %EXTRA_JAVA_PROPERTIES%
    set EXTRA_JAVA_PROPERTIES=-DUSE_JAAS=false -Djps.policystore.hybrid.mode=false -Djps.combiner.optimize.lazyeval=true -Djps.combiner.optimize=true -Djps.auth=ACC -Doracle.core.ojdl.logging.usercontextprovider=oracle.core.ojdl.logging.impl.UserContextImpl -noverify %EXTRA_JAVA_PROPERTIES%
    set EXTRA_JAVA_PROPERTIES=-Dwsm.repository.path=%DOMAIN_HOME%\oracle\store\gmds %EXTRA_JAVA_PROPERTIES%
    set EXTRA_JAVA_PROPERTIES=-Dcommon.components.home=%COMMON_COMPONENTS_HOME% -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Ddomain.home=%DOMAIN_HOME% -Djrockit.optfile=%COMMON_COMPONENTS_HOME%\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.server.config.dir=%ORACLE_DOMAIN_CONFIG_DIR%\servers\%SERVER_NAME% -Doracle.domain.config.dir=%ORACLE_DOMAIN_CONFIG_DIR% -Digf.arisidbeans.carmlloc=%ORACLE_DOMAIN_CONFIG_DIR%\carml -Digf.arisidstack.home=%ORACLE_DOMAIN_CONFIG_DIR%\arisidprovider -Doracle.security.jps.config=%DOMAIN_HOME%\config\fmwconfig\jps-config.xml -Doracle.deployed.app.dir=%DOMAIN_HOME%\servers\%SERVER_NAME%\tmp\_WL_user -Doracle.deployed.app.ext=\- -Dweblogic.alternateTypesDirectory=%ALT_TYPES_DIR% -Djava.protocol.handler.pkgs=%PROTOCOL_HANDLERS% %WLS_JDBC_REMOTE_ENABLED% %EXTRA_JAVA_PROPERTIES%
    set EXTRA_JAVA_PROPERTIES=-Djps.app.credential.overwrite.allowed=true %EXTRA_JAVA_PROPERTIES%
    set JAVA_PROPERTIES=%JAVA_PROPERTIES% %EXTRA_JAVA_PROPERTIES%
    set ARDIR=%WL_HOME%\server\lib
    pushd %LONG_DOMAIN_HOME%
    @REM Clustering support (edit for your cluster!)
    if "%ADMIN_URL%"=="" (
         @REM The then part of this block is telling us we are either starting an admin server OR we are non-clustered
         set CLUSTER_PROPERTIES=-Dweblogic.management.discover=true
    ) else (
         set CLUSTER_PROPERTIES=-Dweblogic.management.discover=false -Dweblogic.management.server=%ADMIN_URL%
    if NOT "%LOG4J_CONFIG_FILE%"=="" (
         set JAVA_PROPERTIES=%JAVA_PROPERTIES% -Dlog4j.configuration=file:%LOG4J_CONFIG_FILE%
    set JAVA_PROPERTIES=%JAVA_PROPERTIES% %CLUSTER_PROPERTIES%
    set JAVA_DEBUG=
    if "%debugFlag%"=="true" (
         set JAVA_DEBUG=-Xdebug -Xnoagent -Xrunjdwp:transport=dt_socket,address=%DEBUG_PORT%,server=y,suspend=n -Djava.compiler=NONE
         set JAVA_OPTIONS=%JAVA_OPTIONS% %enableHotswapFlag% -ea -da:com.bea... -da:javelin... -da:weblogic... -ea:com.bea.wli... -ea:com.bea.broker... -ea:com.bea.sbconsole...
    ) else (
         set JAVA_OPTIONS=%JAVA_OPTIONS% %enableHotswapFlag% -da
    if NOT exist %JAVA_HOME%\lib (
         echo The JRE was not found in directory %JAVA_HOME%. ^(JAVA_HOME^)
         echo Please edit your environment and set the JAVA_HOME
         echo variable to point to the root directory of your Java installation.
         popd
         pause
         GOTO :EOF
    if "%DERBY_FLAG%"=="true" (
         set DATABASE_CLASSPATH=%DERBY_CLASSPATH%
    ) else (
         set DATABASE_CLASSPATH=%DERBY_CLIENT_CLASSPATH%
    if NOT "%POST_CLASSPATH%"=="" (
         set POST_CLASSPATH=%COMMON_COMPONENTS_HOME%\modules\oracle.jrf_11.1.1\jrf.jar;%POST_CLASSPATH%
    ) else (
         set POST_CLASSPATH=%COMMON_COMPONENTS_HOME%\modules\oracle.jrf_11.1.1\jrf.jar
    if NOT "%PRE_CLASSPATH%"=="" (
         set PRE_CLASSPATH=%COMMON_COMPONENTS_HOME%\modules\oracle.jdbc_11.1.1\ojdbc6dms.jar;%PRE_CLASSPATH%
    ) else (
         set PRE_CLASSPATH=%COMMON_COMPONENTS_HOME%\modules\oracle.jdbc_11.1.1\ojdbc6dms.jar
    if "%PORTLET_ORACLE_HOME%"=="" (
         set POST_CLASSPATH=%WC_ORACLE_HOME%\webcenter\modules\oracle.portlet.server_11.1.1\oracle-portlet-api.jar;%POST_CLASSPATH%
    if NOT "%POST_CLASSPATH%"=="" (
         set POST_CLASSPATH=C:\Oracle\Middleware_11.1.1.4\jdeveloper\webcenter\modules\wcps_11.1.1.4.0\wcps-connection-mbeans.jar;%POST_CLASSPATH%
    ) else (
         set POST_CLASSPATH=C:\Oracle\Middleware_11.1.1.4\jdeveloper\webcenter\modules\wcps_11.1.1.4.0\wcps-connection-mbeans.jar
    set POST_CLASSPATH=%PORTLET_ORACLE_HOME%\webcenter\modules\oracle.portlet.server_11.1.1\oracle-portlet-api.jar;%POST_CLASSPATH%
    set POST_CLASSPATH=%DOMAIN_HOME%\wcps-lib\derby-10.6.1.0.jar;%DOMAIN_HOME%\wcps-lib\derbytools-10.6.1.0.jar;%POST_CLASSPATH%
    if NOT "%DATABASE_CLASSPATH%"=="" (
         if NOT "%POST_CLASSPATH%"=="" (
              set POST_CLASSPATH=%POST_CLASSPATH%;%DATABASE_CLASSPATH%
         ) else (
              set POST_CLASSPATH=%DATABASE_CLASSPATH%
    if NOT "%ARDIR%"=="" (
         if NOT "%POST_CLASSPATH%"=="" (
              set POST_CLASSPATH=%POST_CLASSPATH%;%ARDIR%\xqrl.jar
         ) else (
              set POST_CLASSPATH=%ARDIR%\xqrl.jar
    @REM PROFILING SUPPORT
    set JAVA_PROFILE=
    set SERVER_CLASS=weblogic.Server
    set JAVA_PROPERTIES=%JAVA_PROPERTIES% %WLP_JAVA_PROPERTIES%
    set JAVA_OPTIONS=%JAVA_OPTIONS% %JAVA_PROPERTIES% -Dwlw.iterativeDev=%iterativeDevFlag% -Dwlw.testConsole=%testConsoleFlag% -Dwlw.logErrorsToConsole=%logErrorsToConsoleFlag%
    if "%PRODUCTION_MODE%"=="true" (
         set JAVA_OPTIONS= -Dweblogic.ProductionModeEnabled=true %JAVA_OPTIONS%
    @REM -- Setup properties so that we can save stdout and stderr to files
    if NOT "%WLS_STDOUT_LOG%"=="" (
         echo Logging WLS stdout to %WLS_STDOUT_LOG%
         set JAVA_OPTIONS=%JAVA_OPTIONS% -Dweblogic.Stdout=%WLS_STDOUT_LOG%
    if NOT "%WLS_STDERR_LOG%"=="" (
         echo Logging WLS stderr to %WLS_STDERR_LOG%
         set JAVA_OPTIONS=%JAVA_OPTIONS% -Dweblogic.Stderr=%WLS_STDERR_LOG%
    @REM ADD EXTENSIONS TO CLASSPATHS
    @REM set EXT_PRE_CLASSPATH=C:\jarlar\hibernate-3.3.2\antlr-2.7.6.jar;C:\jarlar\hibernate-3.3.2\commons-collections-3.1.jar;C:\jarlar\hibernate-3.3.2\dom4j-1.6.1.jar;C:\jarlar\hibernate-3.3.2\hibernate3.jar;C:\jarlar\hibernate-3.3.2\javassist-3.9.0.GA.jar;C:\jarlar\hibernate-3.3.2\jta-1.1.jar;C:\jarlar\hibernate-3.3.2\slf4j-api-1.5.11.jar;C:\jarlar\hibernate-3.3.2\slf4j-nop-1.5.11.jar;C:\jarlar\hibernate-3.3.2\bytecode\cglib\cglib-2.2.jar;C:\Oracle\Middleware_11.1.1.4\modules\ejb3-persistence-3.3.1.jar;hibernate-validator-4.1.0.Final.jar;
    if NOT "%EXT_PRE_CLASSPATH%"=="" (
         if NOT "%PRE_CLASSPATH%"=="" (
              set PRE_CLASSPATH=%EXT_PRE_CLASSPATH%;%PRE_CLASSPATH%
         ) else (
              set PRE_CLASSPATH=%EXT_PRE_CLASSPATH%
    if NOT "%EXT_POST_CLASSPATH%"=="" (
         if NOT "%POST_CLASSPATH%"=="" (
              set POST_CLASSPATH=%POST_CLASSPATH%;%EXT_POST_CLASSPATH%
         ) else (
              set POST_CLASSPATH=%EXT_POST_CLASSPATH%
    if NOT "%WEBLOGIC_EXTENSION_DIRS%"=="" (
         set JAVA_OPTIONS=%JAVA_OPTIONS% -Dweblogic.ext.dirs=%WEBLOGIC_EXTENSION_DIRS%
    set JAVA_OPTIONS=%JAVA_OPTIONS%
    @REM SET THE CLASSPATH
    if NOT "%WLP_POST_CLASSPATH%"=="" (
         if NOT "%CLASSPATH%"=="" (
              set CLASSPATH=%WLP_POST_CLASSPATH%;%CLASSPATH%
         ) else (
              set CLASSPATH=%WLP_POST_CLASSPATH%
    if NOT "%POST_CLASSPATH%"=="" (
         if NOT "%CLASSPATH%"=="" (
              set CLASSPATH=%POST_CLASSPATH%;%CLASSPATH%
         ) else (
              set CLASSPATH=%POST_CLASSPATH%
    if NOT "%WEBLOGIC_CLASSPATH%"=="" (
         if NOT "%CLASSPATH%"=="" (
              set CLASSPATH=%WEBLOGIC_CLASSPATH%;%CLASSPATH%
         ) else (
              set CLASSPATH=%WEBLOGIC_CLASSPATH%
    if NOT "%PRE_CLASSPATH%"=="" (
         set CLASSPATH=%PRE_CLASSPATH%;%CLASSPATH%
    if NOT "%JAVA_VENDOR%"=="BEA" (
         set JAVA_VM=%JAVA_VM% %JAVA_DEBUG% %JAVA_PROFILE%
    ) else (
         set JAVA_VM=%JAVA_VM% %JAVA_DEBUG% %JAVA_PROFILE%
    startWebLogic.cmd
    @ECHO OFF
    @REM WARNING: This file is created by the Configuration Wizard.
    @REM Any changes to this script may be lost when adding extensions to this configuration.
    SETLOCAL
    @REM --- Start Functions ---
    @REM set JAVA_OPTIONS=-javaagent:C:\jarlar\jrebel\jrebel.jar %JAVA_OPTIONS%
    @REM set CLASS_CACHE=false
    GOTO :ENDFUNCTIONS
    :stopAll
         @REM We separate the stop commands into a function so we are able to use the trap command in Unix (calling a function) to stop these services
         if NOT "X%ALREADY_STOPPED%"=="X" (
              GOTO :EOF
         @REM STOP DERBY (only if we started it)
         if "%DERBY_FLAG%"=="true" (
              echo Stopping Derby server...
              call "%WL_HOME%\common\derby\bin\stopNetworkServer.cmd" >"%DOMAIN_HOME%\derbyShutdown.log" 2>&1
              echo Derby server stopped.
         set ALREADY_STOPPED=true
    GOTO :EOF
    :classCaching
         echo Class caching enabled...
         set JAVA_OPTIONS=%JAVA_OPTIONS% -Dlaunch.main.class=%SERVER_CLASS% -Dlaunch.class.path="%CLASSPATH%" -Dlaunch.complete=weblogic.store.internal.LockManagerImpl -cp %WL_HOME%\server\lib\pcl2.jar
         set SERVER_CLASS=com.oracle.classloader.launch.Launcher
    GOTO :EOF
    :ENDFUNCTIONS
    @REM --- End Functions ---
    @REM *************************************************************************
    @REM This script is used to start WebLogic Server for this domain.
    @REM
    @REM To create your own start script for your domain, you can initialize the
    @REM environment by calling @USERDOMAINHOME\setDomainEnv.
    @REM
    @REM setDomainEnv initializes or calls commEnv to initialize the following variables:
    @REM
    @REM BEA_HOME - The BEA home directory of your WebLogic installation.
    @REM JAVA_HOME - Location of the version of Java used to start WebLogic
    @REM Server.
    @REM JAVA_VENDOR - Vendor of the JVM (i.e. BEA, HP, IBM, Sun, etc.)
    @REM PATH - JDK and WebLogic directories are added to system path.
    @REM WEBLOGIC_CLASSPATH
    @REM - Classpath needed to start WebLogic Server.
    @REM PATCH_CLASSPATH - Classpath used for patches
    @REM PATCH_LIBPATH - Library path used for patches
    @REM PATCH_PATH - Path used for patches
    @REM WEBLOGIC_EXTENSION_DIRS - Extension dirs for WebLogic classpath patch
    @REM JAVA_VM - The java arg specifying the VM to run. (i.e.
    @REM - server, -hotspot, etc.)
    @REM USER_MEM_ARGS - The variable to override the standard memory arguments
    @REM passed to java.
    @REM PRODUCTION_MODE - The variable that determines whether Weblogic Server is started in production mode.
    @REM DERBY_HOME - Derby home directory.
    @REM DERBY_CLASSPATH
    @REM - Classpath needed to start Derby.
    @REM
    @REM Other variables used in this script include:
    @REM SERVER_NAME - Name of the weblogic server.
    @REM JAVA_OPTIONS - Java command-line options for running the server. (These
    @REM will be tagged on to the end of the JAVA_VM and
    @REM MEM_ARGS)
    @REM CLASS_CACHE - Enable class caching of system classpath.
    @REM
    @REM For additional information, refer to "Managing Server Startup and Shutdown for Oracle WebLogic Server"
    @REM (http://download.oracle.com/docs/cd/E17904_01/web.1111/e13708/overview.htm).
    @REM *************************************************************************
    @REM Call setDomainEnv here.
    set DOMAIN_HOME=C:\Users\Dijitaluser\AppData\Roaming\JDeveloper\system11.1.1.4.37.59.23\DefaultDomain
    for %%i in ("%DOMAIN_HOME%") do set DOMAIN_HOME=%%~fsi
    call "%DOMAIN_HOME%\bin\setDomainEnv.cmd" %*
    set SAVE_JAVA_OPTIONS=%JAVA_OPTIONS%
    set SAVE_CLASSPATH=%CLASSPATH%
    @REM Start Derby
    set DERBY_DEBUG_LEVEL=0
    if "%DERBY_FLAG%"=="true" (
         call "%WL_HOME%\common\derby\bin\startNetworkServer.cmd" >"%DOMAIN_HOME%\derby.log" 2>&1
    set JAVA_OPTIONS=%SAVE_JAVA_OPTIONS%
    set SAVE_JAVA_OPTIONS=
    set CLASSPATH=%SAVE_CLASSPATH%
    set SAVE_CLASSPATH=
    if "%PRODUCTION_MODE%"=="true" (
         set WLS_DISPLAY_MODE=Production
    ) else (
         set WLS_DISPLAY_MODE=Development
    if NOT "%WLS_USER%"=="" (
         set JAVA_OPTIONS=%JAVA_OPTIONS% -Dweblogic.management.username=%WLS_USER%
    if NOT "%WLS_PW%"=="" (
         set JAVA_OPTIONS=%JAVA_OPTIONS% -Dweblogic.management.password=%WLS_PW%
    if NOT "%MEDREC_WEBLOGIC_CLASSPATH%"=="" (
         if NOT "%CLASSPATH%"=="" (
              set CLASSPATH=%CLASSPATH%;%MEDREC_WEBLOGIC_CLASSPATH%
         ) else (
              set CLASSPATH=%MEDREC_WEBLOGIC_CLASSPATH%
    echo .
    echo .
    echo JAVA Memory arguments: %MEM_ARGS%
    echo .
    echo WLS Start Mode=%WLS_DISPLAY_MODE%
    echo .
    echo CLASSPATH=%CLASSPATH%
    echo .
    echo PATH=%PATH%
    echo .
    echo ***************************************************
    echo * To start WebLogic Server, use a username and *
    echo * password assigned to an admin-level user. For *
    echo * server administration, use the WebLogic Server *
    echo * console at http:\\hostname:port\console *
    echo ***************************************************
    @REM CLASS CACHING
    if "%CLASS_CACHE%"=="true" (
         CALL :classCaching
    @REM START WEBLOGIC
    echo starting weblogic with Java version:
    %JAVA_HOME%\bin\java %JAVA_VM% -version
    if "%WLS_REDIRECT_LOG%"=="" (
         echo Starting WLS with line:
         echo %JAVA_HOME%\bin\java %JAVA_VM% %MEM_ARGS% -Dweblogic.Name=%SERVER_NAME% -Djava.security.policy=%WL_HOME%\server\lib\weblogic.policy %JAVA_OPTIONS% %PROXY_SETTINGS% %SERVER_CLASS%
         %JAVA_HOME%\bin\java %JAVA_VM% %MEM_ARGS% -Dweblogic.Name=%SERVER_NAME% -Djava.security.policy=%WL_HOME%\server\lib\weblogic.policy %JAVA_OPTIONS% %PROXY_SETTINGS% %SERVER_CLASS%
    ) else (
         echo Redirecting output from WLS window to %WLS_REDIRECT_LOG%
         %JAVA_HOME%\bin\java %JAVA_VM% %MEM_ARGS% -Dweblogic.Name=%SERVER_NAME% -Djava.security.policy=%WL_HOME%\server\lib\weblogic.policy %JAVA_OPTIONS% %PROXY_SETTINGS% %SERVER_CLASS% >"%WLS_REDIRECT_LOG%" 2>&1
    CALL :stopAll
    popd
    @REM Exit this script only if we have been told to exit.
    if "%doExitFlag%"=="true" (
         exit
    ENDLOCAL
    Edited by: webyildirim on 11.Ara.2012 02:38

  • Do we require to install microsoft excel in sharepoint 2013 server?. if require to use sharepoint 2013 excel services.

    Do we require to install microsoft excel in sharepoint 2013 server?. if require to use sharepoint 2013 excel services.
    In our organisation, development team is asking to install office 2013 in SharePoint 2013 server to use different services, where as architecture team not allowing for the same. I need to provide proper justification for installing office 2013 in SharePoint
    2013 server. Please provide me the correct solution for the same.

    No, you do not need to install Office on the SharePoint server to utilize the Excel Services. Office should not be installed on the SharePoint server.
    Do they need Office Web Apps? Are they looking to have the capability to edit documents in the browser maybe? Or have document preview on search? Office Web Apps would be required for this, but this is a different product than Office.
    Brandon Atkinson
    Blog: http://sharepointbrandon.com

Maybe you are looking for

  • Now I have a problem!!! Mushkin!!

    Got my Mushkin PC3200 2x256 RAM Promo build and after install, Windows would not load.Got as far as POST.Kept asking for the system disk (XP)saying it was missing configuration file.Then to run a repair.I started to run it then thought better and res

  • Cannot hear any sound through my external speakers - help!

    I'm running 10.6.4 on my imac 27". Can hear sound though the internal speakers, but even when I plug externals in and restart I can't see any option in the sound system preferences to let me hear through the external speakers. It's odd. Can anyone he

  • Changing dataGrid column width with actionScript

    Having a strange change when trying to change any dataGrid column width with this code: dataGrid.columns[ 5 ].width = 200; It do changes the width of column number 6 to 200, but strangely it's also changes the width of the preceding columns (0-4). Ev

  • XMII Applet and Authentication

    Hi, I have a webpage which has an applet embeded on it. I can access this webpage via a browser from the local xmii server and the applet displays correctly. Whenever I try to access it from a remote client I am getting an "Authentication Required" m

  • Error when accessing Access database in ASP?

    for some reason when I try to open my Access database it constantly and consistenly gives me an error message that claim the table or the query is not valid or the table cannot be found. Both the database and the table exist and are accessible with t