DO with selected batch info save as draft at 2007B

Hi,
Under 2005B version:
For DO with selected batch information save as draft, when open the draft DO, the selected batch info is gone.
Under 2007B version:
For DO with selected batch information save as draft, when open the draft DO, the selected batch info is there, is anyone know which table is stored this information?
Thank you.

Hi,
You can refer to following tables ODIB and OIBT and check if you get what you are looking for.
Regards,
Jitin

Similar Messages

In Photoshop Elements 12, is there a way to batch process all photos in a file with 'Auto Tone' and save the changes?

In Photoshop Elements 12, is there a way to batch process all photos in a file with 'Auto Tone' and save the changes?

Thank you, that was perfect!
Yoni

How do I save a draft on hotmail website if using IPad with IOS 7. Anyone know please?

Seem to be unable to save a draft when using the hotmail website on my I pad. Go into the drafts folder and start new message but there is only a tab for cancel or send and nothing for save. No trouble saving drafts in different hotmail account which is on iPad, problem just on hotmail website. Anyone know if can save drafts on website and if so how to do it. Thanks.

You are welcome.
I helped everyone except Louise maybe.

See batch numbers allocate in draft document

Hi,
I have doing a good exit and I have chosed batch numbers. I have doing a draft of this good exit. When I want to do a query about the draft I haven't table to see the batch numbers which are allocated. How I can link batch numbers with my draft?
Thank you
Séverine

You can select batch numbers for a good deliveries (Right click/Batch Numbers or CTRL TAB on the quantity field) and then save this document as a draft.
When you open this draft and again Right click/Batch Numbers on the quantity field, you can see the batch numbers previously selected.
These batch numbers are not allocated (you can select them when you create another good issue), but there are saved somewhere, and linked to the draft.
However I can't find in which table these batch numbers are saved (I checked OIBT, IBT1, OSRD).
I think that the question is : where are these batch numbers saved?

How can you save a draft SMS on X3-02 ?

How can you save a draft SMS on X3-02 ?
Can't seem to find an option to do this ... Lost message typed half way when I got out of the editor to check the calendar.
Am I missing something or has Nokians obsoleted this function on the latest S40 platform ?
Solved!
Go to Solution.

Hi all,
Like sudude here pointed out that's one way of leaving text as "draft" to message editor. Or you can also select Options > More > Exit editor to do the same. And, next time when you select Create message that previous text should be there as it was left.
But there is also another option to start writing SMS's - with Notes application. Select Menu > Apps > Notes. Write a note and save it. Then for that note select Options > Send note > Send as message. Now your note is copied to message editor and you can send it or further edit and then send. Neat thing here is that when you use Notes application, text can be saved for later editing or use.
-ThreeOs

Itunes 10.6.1.7 problem: when I change the file "media type" from 'Music' to 'Podcast' the file disapears from ITUNES. I do this via (1) right click, (2) select 'Get Info', (3) select 'options' tab, and (4) change media type. What is the problem?

Itunes 10.6.1.7 problem: when I change the file "media type" from 'Music' to 'Podcast' the file disapears from ITUNES. I do this via (1) right click, (2) select 'Get Info', (3) select 'options' tab, and (4) change media type. What is the problem?

Hi Memalyn
Essentially, the bare issue is that you have a 500GB hard drive with only 10GB free. That is not sufficient to run the system properly. The two options you have are to move/remove files to another location, or to install a larger hard drive (eg 2TB). Drive space has nothing to do with SMC firmware, and usually large media files are to blame.
My first recommendation is this: download and run the free OmniDiskSweeper. This will identify the exact size of all your folders - you can drill down into the subfolders and figure out where your largest culprits are. For example, you might find that your Pictures folder contains both an iPhoto Library and copies that you've brought in from a camera but are outside the iPhoto Library structure. Or perhaps you have a lot of purchased video content in iTunes.
If you find files that you KNOW you do not need, you can delete them. Don't delete them just because you have a backup, since if the backup fails, you will lose all your copies.
Don't worry about "cleaners" for now - they don't save much space and can actually cause problems. Deal with the large file situation first and see how you get on.
Let us know what you find out, and if you manage to get your space back.
Matt

Email Security Plug-in - Doesn't seem to work with right click or save and send

I've searched the knowledge base but have not located the answer yet.
We have the Encrypt Message plug-in installed to flag the email [SEND SECURE]. This works very well when in Outlook. It does not seem to work when right clicking a file to send outside of Outlook or performing Save and Send from within Microsoft Office. The add-in still shows and users are clicking it and the Send button but the emails are not going securely. We are on Microsoft2010 on mostly XP machines.
How can I get Encrypt Message to work in all instances?
Thank you.
Starla

Andreas
I am getting an error. See below for what I'm choosing and the response. let me know if I'm supposed to be trying to download from another area.
Thanks
Starla
Email Security Plug-in - Doesn't seem to work with right click or save and send
Cisco IronPort Email Security Appliance C370
Release:IPAS
Filename: CiscoEmailSecurity_7-2-0-039.exe
Remove
Details
Release
IPAS
Filename
CiscoEmailSecurity_7-2-0-039.exe
Release Date
25/Oct/2011
Description
Cisco IronPort Email Security Plug-in (Outlook)
Size
32541.84375 KB (33322848 bytes)
Router Checksum
0x553f
MD5
f0c864697d9e1a3e8f5297062943ac50
Email Security Plug-in - Doesn't seem to work with right click or save and send
Save the device to 'My Added Devices' list
More Info
'My Added Devices' list could be found by: 1. Clicking on 'My Cisco' Tab and expanding
    the 'Added Devices' section. 2. Selecting any task specific product
   selector and clicking on 'My Added
    Devices' in left pane.
Email Security Plug-in - Doesn't seem to work with right click or save and send
Set Cisco Notification Alert
More Info
All 'Cisco Notification Alerts' list could be found
by: 1. Clicking on 'My Cisco' Tab and expanding
    the 'Support Notifications' section.
Cisco service contract information indicates you are not authorized to download software for the following product(s):
Cisco IronPort Email Security Appliance C170
Cisco IronPort Email Security Appliance C370
Cisco IronPort Email Security Appliance C650
To download software for other product(s), remove the software for the product(s) listed above.
Or, if you feel this message is in error, please:
1. Email technical support for 24x7 assistance. To expedite your request, please include the following information:
         User ID (Cisco.com ID used to download software)
         Contact Name
         Company Name
         Contract Number
         Product ID
         Desired Software Release or File Name
2. Contact your Cisco Representative, Partner or Reseller to ensure product(s) listed above are covered on a service contract. The Partner Locator link may assist in locating your nearest partner.
3. Associate contracts for those products to your Cisco.com profile using the Instructions found in Profile Manager. After you submit your additional contracts, verification and updates may take up to 6 hours to complete.

Save in draft folder - problem

As I understand it, the save in draft folder function is supposed to appear only for XDP forms. We have a PDF form where the submit button in the form is set to submit as PDF. And yet, the save button still appears in workspace container. If a user selects the save button and later opens the form/task, the form is converted to XML and unviewable.
Within the UserServiceV2 activity, I do not check off the "Reader Submit - Submit via Reader" checkbox. All of our users have acrobat.
Is there some way for the function to work with PDFs? If not, is there a standard workaround to offer that feature to end users?
Thanks

Hi Livecycle Architect,
Did you ever resolve this issue? I have a part of the problem that you describe here. While all my forms are submitted as XDP, if we save a form to Drafts, when we open it latter it shows XML and the form is unusable.
Any pointers will help.
Thanks

BB is not giving me option to send but only save in draft.

I have a BB Curver 8300. Some mails when try to reply, BB is not giving me option to send but only save in draft.
I tried deleting Service book and resending it is not working..
I took backup and then Wiped the Handel, restored the backup. Still no luck..
Pl advice. Thx
My carrier is LoopMobile

Only some mail? Most likely that email not giving you that option was enabled by the service book(s) you deleted.
Try sending your Service Books again.
On your BlackBerry device, go to:
1. Options > Advanced > Host Routing Table > Menu > Register.
2. Resend your service books from your carrier BIS site:
From your handheld device:   http://www.blackberry.com/btsc/KB15402
Go to the Personal Email Set Up icon and log in. Then under Help!, select Service Books, then select Send service Books.
From your desktop PC: http://www.blackberry.com/btsc/KB02830
North American Carriers - scroll down to select your carrier
WorldWide Carriers - Find your carrier on the list
3. With the BlackBerry device powered ON, remove the battery a few seconds and then reinsert the battery to reboot. This reboot, even if you have already done this, is often needed to install the service books.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

How to simplify entering position selection in Info type 0001 ?

How to simplify entering position selection in Info type 0001 ?
HR admin needs to select vacant positions of org unit 1 or 2.
While executing Hiring action, F4 shows all the root org units - around 20 or so...
I want only the org 1 and org 2 for which the HR Admin can do the hiring.
How to implement this?
Do we have IMG Config for enforce this ?
Is this to be done thru ABAP code or something?
Would the authorization stuff will filter the authorize org units only?
Please help me how to figure this out
Thanks

Hi Chris
There can be a workaround to simplify the process of entering vacant positions from org unit 1 & 2 ONLY . Try this out-
1. create an adhoc query (report output on vacant positions with their object ID and position text for org unit 1and 2)
2. Save the query as a variant (so the HR administrators would need to change only the key date when they run the query)
3. Everytime the HR administrator runs the Hiring action for org unit 1 or 2 , ask them to run the report (adhoc) first. That way they get a complete list of vacant positions as on key date (with object ID) for org unit 1 and 2 . This report can also be downloaded in excel format
4. use the positions from the above list to manually key in the hiring action
Hope this helps you out - may not be the most efficient way of doing but atleast you have a ready list of all vacant positions as on a key date for org unit 1 & 2.
I think there is a standard SAP report on vacant positions per org unit (plz check the SAP easy access menu--> Information system / reporting tools) . If that serves your purpose , no need to create adhoc query
regards
Reema

Cannot 'save as draft' in Mail 5.1

Hi, I've a problem with saving draft emails since I upgraded to Lion.
Example: My wife spent a couple hours replying to a long email from overseas relatives, most of the time spent exporting/resizing large .jpeg photos from iPhoto so the attachments did not mean a huge email.
She was interrupted but not too fussed because previously the emails would be saved as drafts if she closed a message before sending it.
But not this one.
My mail 5.1 help instructs to press the Save As Draft icon. There's no such icon on the toolbar nor is there one selectable from the Customise Toolbar option. File | Save As... is greyed out.
Mac is a mid-2010 iMac 27" quad core. Mail account is a MobileMe account that I am hanging on to until I upgrade my iPhone from a 3G (that cannot support iOS5 or Cloud).
Any help with settings or troubleshooting would be appreciated.

Hi Nick,
I could not find the Save as Draft icon neither, but I do know that if you press Cancel instead of Send, you'll get the Save Dialog. Not very intuitive.
If no one pops in to tell where this icon is, then you should file bug to Apple Feedback: http://www.apple.com/feedback/macosx.html
Edit: couldn't find a direct link to Feedback Mail.

Force all users to change their Enterprise passwords with a batch operation

Hello,
Do you know if there is a way to force all users to change their Enterprise passwords with a batch operation in the SDK? Is there any implementation done?
Many thanks!
Bea

You can logon to Enterprise as Administrator in your SDK application. Query all users using following query:
select * from ci_systemobjects where si_kind='user'
then loop through the collection InfoObjects returned and cast east object to IUser.
Either call setPasswordToChangeAtNextLogon(true) so that the user logs on next time will be forced to change his\her password. Call commit on InfoObjects collection at the end to save the changes.
Otherwise you can call setNewPassword("new password") to reset password for that user.
Depending upon number of users you can do bath commit. You can use commit(infoObjects,true). The 2nd argument is true for batch commit.

ITunes 11.2.2.3 crashes when I select "get info" on a song, iTunes 11.2.2.3 crashes when I select "get info" on a song, iTunes 11.2.2.3 crashes when I select "get info" on a song

That... Everytime I click "get info" on a song iTunes crashes, but if I select more than one song and then select get info it doesn't crash... Help please, this is driving me insane D:

You may have a corrupted webpage but you can try the following:
1 - delete the iWeb preference file, com.apple.iWeb.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete iWeb's cache file, Cache.db, that is located in your
User/Home/Library/Caches/com.apple.iWeb folder (Snow Leopard and Earlier).
3 - launch iWeb and try again.
If that doesn't help continue with:
move the domain file from your Home/Library/Application Support/iWeb folder to the Desktop.
launch iWeb, create a new test site, save the new domain file and close iWeb.
go to the your Home/Library/Application Support/iWeb folder and delete the new domain file.
move your original domain file from the Desktop to the iWeb folder.
launch iWeb and try again.
OT

Apple Mail 4.2 - "save as draft" button

I upgraded recently to Leopard with Mail 4.2.
The "save as draft" button does not appear, neither on the toolbar nor in the toolbar palette...
Anyone could help solving that? I often use that button!
Thanks in advance.
JMB

It only appears on my toolbar after I've selected/created a 'New Message'. (I'm still on Mail 3.6, by the way.)

Service Request - Default Owner field with Created By info

Can anyone help me to default "Owner" field in "Service Request" record type with same info of the "Created By",
Currently the owner field is provided with magnified glass option to select Owner and Save the Service Request.
Thanks, Mahesh

Mahesh,
I am assuming that the login user is the creator of the record.
In that case, use the 'Owned By Id' field in the SR object. Post default it to LoginId()
Rgds,
Amit

DO with selected batch info save as draft at 2007B

Similar Messages

Maybe you are looking for