Do you always need to run enable-cstopology/bootstrapper after update?

If I look at the instructions for the January updates:
http://support.microsoft.com/kb/2809243/
I can see that it says you have to run "Install-csdatabase". But as far as I can see you dont need to that because the database are already at the correct level.
http://blogs.technet.com/b/dodeitte/archive/2013/07/02/how-to-verify-if-lync-server-2013-database-updates-completed-successfully.aspx
My question is if the last part about mobility and running bootstrapper is also redundant since I already have mobility enabled?
I guess the information is there since it is a cumulativeupdate so if you have not installed any of the previous updates you have to run both the database update and enable the mobility service?

At the beginning of the KB article it does say which steps have to be run depending on the current version of Lync Server.
"To install updates for a Lync Server 2013 installation that has the July 2013 cumulative update (5.0.8308.420) or a later update installed,
you must perform the following step 1.
To install updates for a Lync Server 2013 installation that has the February 2013 cumulative updates (5.0.8308.291) installed, you must perform
the following steps 1 and 2.
To install updates for Lync Server 2013 RTM (5.0.8308.0) you must perform the following steps 1-5."
Step 1: Install CU
Step 2: Back end database updates
Step 3: CMS database update
Step 4: Enable Mobility service
Step 5: Enable UCWA
Please mark posts as answers/helpful if it answers your question.
Blog
Lync Validator (BETA) - Used to assist in the validation and documentation of Lync Server 2013.

Similar Messages

HT5622 Do you always need a credit card to verify your account

Do you always need a credit card to verify your account

You can set your account to have no bank card.
This user, mountaingoatgirl, explains how to get a None option in your account details in the iTunes app on a Mac or PC. -
https://discussions.apple.com/message/24907941

Do I need to run a malware scan after removing uTorrent?

I know this is a dumb question, but I don't know of any malware scan sites for Mac that I trust. I'm using Mavericks and my OS is up-to-date. Do I need to run a malware scan after uninstalling uTorrent? If so, where would I get one I can trust?
Here is my scenario - On a recommendation (which I no longer trust) I installed uTorrent, as I wanted to download a file that was only available in torrent form. (This file is a legally available file, so I would not be violating copyright.)
What made me worry was the when I downloaded uTorrent, it installed without asking me to enter my admin password. This raised a red flag for me. So I immediately uninstalled uTorrent, by moving the Application to trash.
So, now that I have it uninstalled, is there a danger it may have left unwanted files on my Mac?
I don't see any evidence of unwanted files. Just wondering. Am I worrying for nothing?

darrenfromoakland wrote:
I don't know of any malware scan sites for Mac that I trust.
There aren't any. It is not possible to scan one's computer from a web-site, they are all scams. All or most of the Windows sites are, as well.
when I downloaded uTorrent, it installed without asking me to enter my admin password. This raised a red flag for me. So I immediately uninstalled uTorrent, by moving the Application to trash.
So, now that I have it uninstalled, is there a danger it may have left unwanted files on my Mac?
Many applications can be installed without the need for an admin password since they don't need to install files in any common or system locations. As long as everything goes into the Applications folder and your user folder, you should never need admin permissions.
uTorrent itself is a perfectly legit application that can be used for illegal activities, like all BitTorrent apps. I'm sure it comes with an Apple developer ID signature and under normal circumstances should not be able to harm your OS X or it's applications. But to some extent it depends on where you obtained the app itself. Any app you obtain from AppStore, a legit developer site or MacUpdate should be just fine. If you got it from C|Net's download.com or Softonic then it may have come with an installer that will also install annoying adware. It would have notified you that it was being installed (and again, no admin password is required), but a large majority of users never read those dialogs and blindly click through them to get their app installed and in use as soon as possible. If you think the latter is a possibility, then the Adware Removal Guide that Carolyn tipped you to has a Adware Removal Tool that should make quick work of anything like that.

I am getting run time error 6034 after updating iTunes to new version.Any help?

I am getting run time error 6034 after updating iTunes to new version.Any help?
I tried different ways to resolve it like uninstall/install itunes
I am also getting error message on iTunes helper.exe

Hi isush!
I have an article for you that will help you troubleshoot this issue:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Thanks for coming to the Apple Support Communities!
Cheers,
Braden

Itunes will not run on my pc after update: see error messageProblem Event Name:     BEX

Itunes will not run on my pc after update, i get this error message:
Problem Event Name:          BEX
Application Name:               itunes.exe
Aplication Version               10.7.0.21
Application Time Stamp          504d85d9
Fault mode Name:               Quicktime.qts_unloaded
Any Ideas on a fix??

Fault mode Name:               Quicktime.qts_unloaded
Try updating your QuickTime Player to the most recent version. Does that clear up the launch errors?

Do I need to run anti-viral program after trying to open a spam attachment?

I was tricked by a spam email and clicked on a link, which did not open. I've been advised to delete the email (done), change my password (done), and run anti-viral program (not done, and never have). What, if anything, should I do?

You don't need to run antivirus software after that. Just be more careful in the future.
(114282)

I need to re enable divx connected after Firefox disabled it

Firefox 10.01 disabled "divx connected" software. I need to re enable that software

No, you don't have to convert to CoreStorage unless you decide to create a Fusion drive out of your SSD and HDD.

Logic pro crashes / freezes after running about a hour after updating

Hope anyone can help me.
I use G5 powermac.
Had 10.3.x running with Pro6 with no problems (because of that I'm a big mac fan
I updated to Pro7.2.x and also to OSX 10.4.8 when the problem started
It's a strange problem, it seems something happens in my computer after a period of time.
Logic is always crashing / freezes after working with it for about 1 hour (not sure exact time). When I just leave my mac on for the same period of time not running logic and start up Logic later it also freezes imidiately. But only logicpro seems to have this problem. All other programs working well.
I need to restart my computer to start working again and then again after a period logic crashes again. I also installed logic express but express works well.
I already reinstalled everything a few times and also working with just the basic (no plugs, interal audio, no hardware, no extra memory ect.) didn't help. I did changed discdrives, internal memory ect.
Hope anyone has an idea what it can be
Thanks for helping
Powermac G5 SP 1.8 Mac OS X (10.4.9) 2GB int. mem

hi,
look here:
http://docs.info.apple.com/article.html?artnum=302212
hier you will find the right downloads for the firmware update for the late 2004 g5 1.8. choose the right updater for your system.
it should also appear if you use the software update.
after that it should work like before.
hope that helps
all the best
andreas

Skype runs much more SLOWER after update to 7.2.0....

Hello skype,
This problem is like an eternal issue you have.
Let's take a look my PCs (I am working with 2 PCs) specs here (it seems people like to ask about it):
Windows 7 64 Bit / Windows 8.1
4 GB DDR3 RAM / 8GB DDR3 RAM
Once upon a time, before upgrading my skype to 7.2.0.103 I found that the booting time for skype to runs on my PC was slow (it's about 3-5 minutes), well I don't really care about it until one day I choose to upgrade my skype to the latest version (today is 7.2.0.103) and hope that the issue will be fixed.
But guess what, it become worst than before. These are the issues I found on it:
Booting time extremely slow
Always (means 100%) freeze when opening a group chat
Often (not 100%, but it close to 100%) "connecting...." when transferring files
So, what should I do?
P.S. :
I was wondering whether it's due to the very very very long chat history I have. Yes, we're using skype here to work so almost all communication (the fast one) will be done in skype chat window.

All iPhones require activation after a restoration and an iOS upgrade. There really was no reason to throw your deactivated SIM from AT&T away. You'll need an AT&T sim to activate that phone. It doesn't need to be active, however. Borrow one from someone to get your phone activated

Do I need to re-enable Core Storage after cloning and swapping out my HDD?

I swapped out the internal hard drive of my mid-2012 13" MacBook Pro for an SSD. I'm very pleased with the performance gains so far — it feels like a whole new Mac. I cloned my HDD to the SSD before installing using Carbon Copy Cloner and I also created a Recovery partition using the same software. Now after doing the hardware swap, verything is working perfectly — no issues at all. Here's my question:
I know that when I upgraded to Yosemite, my hard drive was converted from old-fashioned GUID partitions to the new Core Storage and a logical volume group partition. After the clone and hardware swap, I'm back to old-fashioned partitions, no more Core Storage. Do I need to manually re-enable Core Storage? (I've read about how to do this, and I feel confident I can follow the steps.) What are the benefits of this? Will a future Yosemite (hypothetical 10.10.3?) update put it back for me? Or is it fine to proceed the way I am now? I'm not currently using FileVault 2, which I know also uses Core Storage.
Thanks.

No, you don't have to convert to CoreStorage unless you decide to create a Fusion drive out of your SSD and HDD.

Need to run 2 concurrent programs after completing child concurrent program

Hi,
Could you suggest me on below:
R12/ 11g
I have main concurrent program MAIN_CONC_PG.
In this concurrent program there is a child concurrent program CHLD_CONC_PG.
This child concurrent program will run for parameters 1,2,3,4,5.
CHLD_CONC_PG program will run simultaneously 5 times:
CHLD_CONC_PG ==> 1
CHLD_CONC_PG ==> 2
CHLD_CONC_PG ==> 3
CHLD_CONC_PG ==> 4
CHLD_CONC_PG ==> 5
Now, after completion of above 5 Child Concurrent programs i have to start 2 more concurrent programs using fnd_request.submit_request:
1) Item Attributes
2) Vendor populate
Thanks.

931832 wrote:
yes, both the Conc Programs are part of Main Conc Prog.
1) Item Attributes
2) Vendor populate
I should be using FND_CONCURRENT.WAIT_FOR_REQUEST.
any sample code that uses FND_CONCURRENT.WAIT_FOR_REQUEST ??
IN my Main Conc Prog, i have below child conc prog. after completing below program i have to run 1) Item Attributes 2) Vendor populate conc progms.
FOR i IN 1..v_count
LOOP
v_request_id := fnd_request.submit_request(application => 'XXDH',
program => 'XXPTN_ITEM_ORDR_E',
description => NULL,
start_time => NULL,
sub_request => FALSE,
argument1 => i);
END LOOP;Hi,
You can also try something like this.
declare
l_reqid_tab is table of number index by pls_integer;
l_reqid_tbl l_reqid_tab;
function program_successful ( p_conc_req_id number ) return boolean
is
    l_finished    boolean;
    l_phase       varchar2 (100);
    l_status      varchar2 (100);
    l_dev_phase   varchar2 (100);
    l_dev_status varchar2 (100);
    l_message     varchar2 (100);
begin
    if p_conc_req_id > 0 then
      l_finished := fnd_concurrent.wait_for_request ( request_id => p_conc_req_id
                                                     ,interval   => 5
                                                     ,max_wait   => 0
                                                     ,phase      => l_phase
                                                     ,status     => l_status
                                                     ,dev_phase => l_dev_phase
                                                     ,dev_status => l_dev_status
                                                     ,message    => l_message );
      commit;
      if upper(l_dev_status) in ('WARNING', 'ERROR') and upper(l_dev_phase) in ('COMPLETE') then
        return false;
      elsif upper(l_dev_status) in ('NORMAL') and upper(l_dev_phase) in ('COMPLETE') then
        return true;
      else
        return false;
      end if;
    else
      return false;
    end if;
end program_successful;
begin
for i in 1..v_count loop
    l_reqid_tbl(i) := fnd_request.submit_request....
end loop;
for i in 1..l_reqid_tbl.count loop
    if program_successful(l_reqid_tbl(i)i) then
      null;
    end if;
end loop;
-- code to submit your other program here.Hope this helps.
Regards,
Allen
Edited by: Allen Sandiego on Jun 18, 2012 9:47 AM
Made some modifications since number of spawned child requests is variable.

Need to run "udevadm trigger" again after startx

I rearranged some keyboard modifiers according to instructions found here:
https://wiki.archlinux.org/index.php/Ma … etkeycodes
Everything works except that when I start X11 (with startx), then I have to run "udevadm trigger" again to get the new modifiers working. This is the case for both my laptop and USB keyboards.
Any ideas?
$ cat /etc/udev/hwdb.d/10-my-sane-modifiers.hwdb
keyboard:usb:* # match all keyboards for now
keyboard:usb:v05AFp8277* # but especially my Kensington Slim Type
KEYBOARD_KEY_70039=leftalt # bind capslock to leftalt
KEYBOARD_KEY_700e2=leftctrl # bind leftalt to leftctrl
keyboard:dmi:* # laptop keyboard
KEYBOARD_KEY_3a=leftalt # bind capslock to leftalt
KEYBOARD_KEY_38=leftctrl # bind leftalt to leftctrl

Hi Neha.
Thanks for quik turn around. But I need this z program to run after all changes are done in XK02 because I need to use the changed vendor data in the BDC program. This is the exit which triggers before save, so I couldn't get the changed vendor data from database table to use in z program (BDC).
Hope I am clear.
Cheers,
sami.

Need help in enable import,export and update button in rulesmanager

Dear Team,
I am using SAP Netweaver 7.3 CE.
I have exposed the Decision Table as webservice. I made this on Rule Composer Developement.
Now i want to import and export the decision table from url. like
http://localhost:50000/rulesmanager
I have given all roles/action regarding rules to test user.
But decision table is shown only in read only mode.
How to update decision table run time ?
I would really appreciate on your prompt response.
Regards,
Ashish Patel

Dear Ashish Patel,
As far as I know, you can only expose a decision table as a web-service which is created inside a Reusable Ruleset. And RulesManager application only allows editing of Rulesets and Flow Rulesets but Reusable Ruleset is not editable in RulesManager. And hence, you will not be able to edit/export/import the decision table in the Reusable Ruleset.
Hope this answers your question.
Thanks and Regards,
Santosh Giri

Help Please: Can't run 1280 x 1024 after update (Solved)

My display has changed to 1024 x 768, and my monitor is not listed in gnome display settings. Was working fine up until only minutes ago. Display went to sleep while I was away and when I woke it the settings were changed.
What can I do?
Thank you. Brian
Edit:
After looking around I think my xorg.conf file changed.
When I re-run 'Xorg -configure' it returns an error stating that the number of screens detected does not match...
The current log file Xorg.0.log [1], an old log file Xorg.12.0.log [2], and the log from the configure command above Xorg.configure.log [3] can be viewed here.
The following are snippets of resolution section from [1] and [2].
Previously Working
[162994.695] (II) [drm] DRM interface version 1.4
[162994.699] (II) [drm] DRM open master succeeded.
[162994.699] (--) NOUVEAU(0): Chipset: "NVIDIA NV34"
[162994.699] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[162994.699] (==) NOUVEAU(0): RGB weight 888
[162994.699] (==) NOUVEAU(0): Default visual is TrueColor
[162994.699] (==) NOUVEAU(0): Using HW cursor
[162994.699] (==) NOUVEAU(0): GLX sync to VBlank disabled.
[162994.699] (==) NOUVEAU(0): Page flipping enabled
[162994.806] (II) NOUVEAU(0): Output VGA-1 using monitor section Monitor0
[162994.920] (II) NOUVEAU(0): Output TV-1 has no monitor section
[162995.026] (II) NOUVEAU(0): EDID for output VGA-1
[162995.026] (II) NOUVEAU(0): Manufacturer: EPI Model: e784 Serial#: 5248
[162995.026] (II) NOUVEAU(0): Year: 2004 Week: 14
[162995.026] (II) NOUVEAU(0): EDID Version: 1.3
[162995.026] (II) NOUVEAU(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[162995.026] (II) NOUVEAU(0): Sync: Separate
[162995.026] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 34 vert.: 27
[162995.026] (II) NOUVEAU(0): Gamma: 2.38
[162995.026] (II) NOUVEAU(0): DPMS capabilities: Off; RGB/Color Display
[162995.026] (II) NOUVEAU(0): First detailed timing is preferred mode
[162995.026] (II) NOUVEAU(0): redX: 0.650 redY: 0.319 greenX: 0.300 greenY: 0.600
[162995.026] (II) NOUVEAU(0): blueX: 0.152 blueY: 0.108 whiteX: 0.312 whiteY: 0.328
[162995.026] (II) NOUVEAU(0): Supported established timings:
[162995.026] (II) NOUVEAU(0): 720x400@70Hz
[162995.026] (II) NOUVEAU(0): 640x480@60Hz
[162995.026] (II) NOUVEAU(0): 640x480@67Hz
[162995.027] (II) NOUVEAU(0): 640x480@72Hz
[162995.027] (II) NOUVEAU(0): 640x480@75Hz
[162995.027] (II) NOUVEAU(0): 800x600@56Hz
[162995.027] (II) NOUVEAU(0): 800x600@60Hz
[162995.027] (II) NOUVEAU(0): 800x600@72Hz
[162995.027] (II) NOUVEAU(0): 800x600@75Hz
[162995.027] (II) NOUVEAU(0): 832x624@75Hz
[162995.027] (II) NOUVEAU(0): 1024x768@60Hz
[162995.027] (II) NOUVEAU(0): 1024x768@70Hz
[162995.027] (II) NOUVEAU(0): 1024x768@75Hz
[162995.027] (II) NOUVEAU(0): 1280x1024@75Hz
[162995.027] (II) NOUVEAU(0): Manufacturer's mask: 0
[162995.027] (II) NOUVEAU(0): Supported standard timings:
[162995.027] (II) NOUVEAU(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
Currently Not Working
19.491] (II) [drm] DRM interface version 1.4
[ 19.491] (II) [drm] DRM open master succeeded.
[ 19.491] (--) NOUVEAU(0): Chipset: "NVIDIA NV34"
[ 19.491] (**) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[ 19.491] (==) NOUVEAU(0): RGB weight 888
[ 19.491] (==) NOUVEAU(0): Default visual is TrueColor
[ 19.491] (==) NOUVEAU(0): Using HW cursor
[ 19.491] (==) NOUVEAU(0): GLX sync to VBlank disabled.
[ 19.491] (==) NOUVEAU(0): Page flipping enabled
[ 19.550] (II) NOUVEAU(0): Output VGA-1 using monitor section Monitor0
[ 19.670] (II) NOUVEAU(0): Output TV-1 has no monitor section
[ 19.730] (II) NOUVEAU(0): EDID for output VGA-1
[ 19.730] (II) NOUVEAU(0): Printing probed modes for output VGA-1
[ 19.730] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 19.730] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 19.730] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 19.730] (II) NOUVEAU(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
[ 19.730] (II) NOUVEAU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492 525 -hsync -vsync (31.5 kHz e)
[ 19.850] (II) NOUVEAU(0): EDID for output TV-1
[ 19.850] (II) NOUVEAU(0): Output VGA-1 connected
[ 19.850] (II) NOUVEAU(0): Output TV-1 disconnected
[ 19.850] (II) NOUVEAU(0): Using fuzzy aspect match for initial modes
[ 19.850] (II) NOUVEAU(0): Output VGA-1 using initial mode 1024x768
[ 19.850] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 19.850] (--) NOUVEAU(0): Virtual size is 1024x768 (pitch 0)
[ 19.850] (**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[ 19.850] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 19.850] (**) NOUVEAU(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[ 19.850] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 19.850] (**) NOUVEAU(0): Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
[ 19.850] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 19.850] (**) NOUVEAU(0): Driver mode "848x480": 33.8 MHz (scaled from 0.0 MHz), 31.0 kHz, 60.0 Hz
[ 19.850] (II) NOUVEAU(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
[ 19.850] (**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 59.9 Hz
[ 19.850] (II) NOUVEAU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492 525 -hsync -vsync (31.5 kHz e)
[ 19.850] (==) NOUVEAU(0): DPI set to (96, 96)
Last edited by bsquared (2012-05-06 18:13:13)

[ 19.550] (II) NOUVEAU(0): Output VGA-1 using monitor section Monitor0
[ 19.670] (II) NOUVEAU(0): Output TV-1 has no monitor section
[ 19.730] (II) NOUVEAU(0): EDID for output VGA-1
[ 19.730] (II) NOUVEAU(0): Printing probed modes for output VGA-1
[ 19.730] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 19.730] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 19.730] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 19.730] (II) NOUVEAU(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
[ 19.730] (II) NOUVEAU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492 525 -hsync -vsync (31.5 kHz e)
With these, I'm not sure running "xrandr -s 1280x1024" will work.
I think you need to use something like:
Section "Monitor0"
Identifier "VGA-1"
Modeline "1280x1024_75.00" 138.75 1280 1368 1504 1728 1024 1027 1034 1072 -hsync +vsync
Option "PreferredMode" "1280x1024_75.00"
EndSection
Use the "official" modeline calculator to get the Modeline (refresh rates from the manufacturer website, I hope), restart X, and there you have it. It worked for someone once: https://bbs.archlinux.org/viewtopic.php?id=140496
Last edited by DSpider (2012-05-06 07:20:59)

Due to invalid SIM card message can't run my iphone 4 after updating to iOS 7.0.2

Hi,
I updated my iphone 4 to iOS 7.0.2 and iTunes 11.1.1 but have not been started yet due to pops up a message " INVALID SIM CARD" though sim is active as well as pin is unlocked. Need your feedback soon.
Regards
Robin
iPhone 4, iOS 7.0.2, iTunes 11.1.1
<Personal Information Edited by Host>

Remove the current sim, clean the contacts, re-install the sim.
Contact your wireless provider and get a new sim.
Has the iPhone been previoulsy jailbroken or modified to work with
other than the original provider?
FYI: Not wise to post your personal information in a public forum.

Do you always need to run enable-cstopology/bootstrapper after update?

Similar Messages

Maybe you are looking for