Do you ever use the Ignore Sequence Rendering Errors preference? If so, why?

There is a hidden Ignore Sequence Rendering Errors preference in After Effects that is untested, unsupported, and potentially dangerous to your rendered video---but still maybe useful in some rare cases. If you ever use this preference, tell us here why.
This preference makes After Effects continue rendering an image sequence, even when errors are encountered that would otherwise stop the render. Of course, this means that you'll end up with bad frames... but maybe you're OK with some bad frames that you can patch later, as long as the render continues for the remaining frames.
If you do ever use this preference, note that any time that you need to do so, you should also be submitting a bug report so that we know about the errors that you're encountering and can look into fixing them.

I have absolutely used this, and at times it's been a life-saver! The principle use case is this:
Tight deadline, late night. Delivery is tomorrow. I've got a complex composite with a number of layers (maybe 4k r3ds) and I'm going to render a dpx image sequence overnight. It's going to take several hours. Sometimes the render fails because a 3rd party plug in (say something from Re:Vision or Cycore) throws an error randomly every now and then.
If I chose Ignore Sequence Rendering Errors, maybe I'll get a bad frame or two, which I can patch in the morning. But at least 99% of the render is done. If the render crashes and it stops in the middle of the night. I'm up a creek.
Very useful feature which I don't use often, but comes in very handy when I need it.
Cheers,
Ari

Similar Messages

My iPhone 4s was stolen this weekend and I did the Remote Lock. What exactly does that do? Also, if i do the Remote Wipe will that erase all of my data and impede anyone from ever using the phone?

My iPhone 4s was stolen this weekend and I did the Remote Lock. What exactly does that do? Also, if i do the Remote Wipe will that erase all of my data and impede anyone from ever using the phone?

The remote lock locks the iphone with a passcode that you set. By remote wiping the device it will simply restore it and clear it of all its data, but by doing this it will prevent you tracking it and communicating with it (e.g. remote locking it) in the future

GB won't open- This is what I get... Path does not exist: /Library/Audio/Apple Loops Index st: /Library/Audio/Apple Loops Index w/out this directory you cannot use the Loop Browser

Path does not exist: /Library/Audio/Apple Loops Index st: /Library/Audio/Apple Loops Index w/out this directory you cannot use the Loop Browser. Then I get this message...
Instrument Library Invalid
GarageBand Ecpects a valid instrument foledr in /Libraty/Application Support/GarageBand
Please choose a valid instrument Library folder or quit and re-install GB
Any solutions?

Is this a new installation of GarageBand or has it worked before on the same computer?
Or have you transferrred your GarageBand from a different computer?
The error message is saying, that your GarageBand installation is incomplete. There are essential foldrs missing in your system library.
Check, if indeed both folders are missing or if only the permissions are set incorrectly.
Your system library (the folder "System" directly on your system drive) should have the following folders inside the folder "Audio", and they need to be readable by the system and by administrators.
And in the folder /Library/Application Support there should be the Instrument Library.
If these folders do not exist (or no longer exist), restore them from your backup- If your GarageBand version is a new installation, the application may not hve been downloaded or installed completely, then reinstall GarageBand.
What is your GarageBAnd version, and how did you install it originally?
Regards
Léonie

I'm getting the iPhone5S and I know you can use the same Apple ID but I have to delete my details off my current phone, how can I keep my account so I can use it again on my new phone?

When I sold my iPod I had to delete my apple account but I want to use this apple account on my soon to be new phone the iphone5S, I know you can use the same address but if I delete the account on my phone will I still be able to get it back on my new phone? And what about purchases and iBookstore? If I've purchased items will I be able to get them on my new device?

Yes, you only have to make an icloud backup on your old phone and restore from that backup on your new phone. If everything goes well, you can safely restore your old phone.

You can use the same email address that you used to set up the old Sync? , before bookmarks can return, if I registered success?

for my old email address account( @qq.com)
july 2014 I install new windows xp, but I can't log in before account 44*******@qq.com, its always give me enjoyful when I was easy open bookmark url from different computer.
but there is no any notice or email to me firefox will have new sync system, if there, I could backup before bookmarks from 28 vision ( or some june's vision), but this big browser group is quiet, now, I can't log in again old account,
achieve process:
1st, normal account and right password, its show me unknown account.
2nd, Password Reset, " An email has been sent to the requested account with further information. If you do not receive an email then please confirm you have entered the same email address used during account registration.", I couldn't receive any mail(or in spam) :(
3rd, How to update to the new Firefox Sync ...
"You can use the same email address that you used to set up the old Sync." , before bookmarks can return, if I registered success?
I really feel disappointment with firefox( although used for many years), much text, but couldn't resolve clear simple path. answers more hidden link to read, I just use it explore internet, I am not technology engineer, don't care what so much b***t.
thanks, back me old bookmarks only, thanks.

Hi eddinchina,
You should have no need to use the Old Sync account.
As long as device or devices are Firefox 29 or later (They should all be Firefox 30 now) you should use the New Sync.
You may use the same email address with both accounts.

Can not port forward on WRT54GS v6 "You cannot use the router IP"

Hello, I'm trying to open a port number, but when I try to use my router's IP, the following message appears
"You cannot use the router IP, network, or broadband address"
[IMG]http://i45.tinypic.com/107qond.jpg[/IMG]
My ADSL was working as a NAT behind a NAT connection, so I had to change my Local IP Address to 192.168.2.1.
Router: WRT54GS v6 firmware 1.52.8 (latest) - Bellsouth router: Westell 6100
Microsoft Windows [Version 6.1.7600]
Ethernet adapter Local Area Connection:
   Connection-specific DNS Suffix . : launchmodem.com
   Link-local IPv6 Address . . . . . : fe80::40a9:a76e:61b3:6435%11
   IPv4 Address. . . . . . . . . . . : 192.168.2.100
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . : 192.168.2.1
So, please help me, how can I open ports on my router? =[
PS: I tried to use 192.168.2.100, and even though it lets me use it, it still seems not to open that port... my IP is dynamic.

Generally: NAT behind NAT is a bad idea. There is usually no need for double NAT. Either configure the ADSL router as bridge and use the WRT for your internet connection or set up the WRT as simple access point behind the ADSL router.
It's also unclear to me what is working or not. First I thought you can't set up forwarding at all because you get that error message. Then, in your PS you write you tried to use 192.168.2.100 and that seemed to be possible. The IP address to forward to must be the IP address of the computer to which you want to forward. Thus 192.168.2.100 is exactly the IP address you have to set up. Does this work or not?
Also remember: with double NAT you must set up two forwardings: first on the ADSL router then on the WRT. Port forwarding is necessary to allow incoming traffic through NAT. All incoming traffic arrives on the ADSL router. Thus setting up port forwarding on the WRT only won't do a thing.
It's also not recommend to use dynamic IPs for forwarding destinations. Dynamic IP addresses may change over time and that requires you to adjust forwardings accordingly. It's better to reserve fixed IP addresses (if your WRT supports this) or set a static IP address on the computer outside the DHCP address pool.

I get the message "You cannot use the application "AdobeApplicationManager" with Mac OS X

I get the message "You cannot use the application "AdobeApplicationManager" with Mac OS X

Hi LegallyArmedAm,
Are you still getting the message?
-Dave

APP-PAY-06041: you cannot use the enter resource form because human resource is fully installed. Instead use the Human resource people form

hi
i'm getting this error when i'm creating in projects implementation superuser HR foundation - Enter AND maintain
APP-PAY-06041: you cannot use the enter resource form because human resource is fully installed. Instead use the Human resource people form
PLEASE HELP
Thanks
Regards
vijay

Did you check metalink -
PERWSEMP When Creating new Employee Using HR Foundation, APP-PAY-06041: You Cannot use the Enter Person Form Because Human Resources is Fully Installed (Doc ID 353323.1)

How do you know when you are using the internet?

If I am using an app that requries internet, and I press the middle button to get out of it am I still using part of my data plan?

While you are using the app if you are not on WiFi you are using the internet. If the app is one of the few that can run in the background you need to close it to stop it from using your data plan. Double click the home (middle) button, hold down your finger on the app, when you see a red circle with a dashed white line next to the app icon tap it, press the home button.

Do you recommend using the Jdeveloper tool

do you recommend using the Jdeveloper tool ,or it is better to write JSP pages and connect them to the Oracle database.

I don't think MainStage recognizes automap. I have an impulse 49. You can control all of the knobs, faders and transport buttons and even assign different samples to the drum pads, but no Automap does not recognize MainStage. You don't even need Automap to use the Impulse with MainStage.

TS1292 I have a gift card that i tried using a coin to scrape off. When i was doing it, the whole thing came off. I want to know if you can use the barcode to still get me the money.

I have a gift card that i tried using a coin to scrape off. When i was doing it, the whole thing came off. I want to know if you can use the barcode to still get me the money.

roaminggnome was referring to the page that you posted from i.e. http://support.apple.com/kb/TS1292
You've tried contacting iTunes Support as it suggests on that page ? If not then you can contact them via this page and see what they say (you will probably need to give them images of the front and back of the card, and possibly its receipt) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then iTunes Cards And Codes

How do I change the sound that is played when you iI use the Find my IPhone feature to make it alot louder? The current sound is very faint, difficult to find as I am hard of hearing.

How do I change the sound that is played when you I use the Find my IPhone feature to make it alot louder? The current sound is very faint, difficult to find as I am hard of hearing.

Hi,
Tap the iPod icon in the Dock. Then tap the Airplay icon just to the right of the volume slider.
Make sure the iPad speakers are selected, not your wireless.
Carolyn

Why is a new user account created every time I upload files from my old PC. Can't you just use the same user account all the time?

I'm a new Mac user and am finding my way slowly around it. One question: why is a new user account created every time I upload files from my old PC?

Because you're using the Migration Assistant, and it can't migrate data to an existing user account. Transfer everything at once or use a different method.
(111200)

I'm fed up with buying albums on i tunes with tracks cut. Did you ever experience the same?

i'm fed up with buying on i tunes albums with cut tracks. did you ever experience the same? and stop buying at Apple's?

Assuming you are in a region where you are allowed to redownload your past music purchases, delete the broken tracks from your iTunes library, go to the iTunes Store home page, click the Purchased link from the Quick Links section in the right-hand column, then select Music and Not on this computer. You should find download links for your tracks there.
If you don't see them straight away it may help to close and restart iTunes.
While downloading select Downloads in the left-hand column and make sure Allow Simultaneous Downloads is unticked.
If the problem persists, or that facility is not yet available in your region, contact the iTunes Store support staff through the report a problem links in your account history, or via Contact Support.
See also: HT2519 - Downloading past purchases from the App Store, iBookstore, and iTunes Store
tt2

Would using a Apple Time Capsules be easier to use as you can use the Airport Utility to set everything up? Would using encryption affect the speed / durability / life span of the drive in a computer or Time Capsule?

Would using a Apple Time Capsules be easier to use as you can use the Airport Utility to set everything up?
OR would there be better programs out there that would do more than Airport Utility on a non Apple drive?
Would using encryption affect the speed / durability / life span of the drive / Fusion drive in a computer or Time Capsule?

1. Time Capsules are the easiest device to setup for Time Machine.
2. Sorry this is unclear. There are a huge number of routers available that have far superior controls than apple routers.. some support Time Machine.. most don't. They negate your question 1. in being difficult to setup. And alot of 3rd party devices that claim Time Machine compatibility are unreliable.
3. Encryption is irrelevant.

Do you ever use the Ignore Sequence Rendering Errors preference? If so, why?

Similar Messages

Maybe you are looking for