Do you get free internet connection everywhere when not on a plan for iphone 4s does it come with siri

do you get internet connection everywhere without a plan on iphone 4s and do you get siri

Yeah but if his iP is already saying it's paired the issue is prob something else.
I am guessing it's just not being powered/connected right--I've had a goofy time turning mine on relative to
other BT headsets...
With it in your ear try holding down the power button till you hear ascending chimes (descending=off).
After it's on you sometimes need to tap it once briefly (hear a beep) and then you'll see the little BT symbol on the iP if it's connected.
Try that.

Similar Messages

  • Did you get an Internet connection?

    Hi: I read ur posting, and I have the same exact set-up, ie, same Belkin router, iBook, and PC (Dell), and have a iMac. I cant get the Expander to work with my iBook--like you the airport card picks up the network but I cant get an internet connection. I read thru the thread about firmware update--did you do it and does the Belkin wireless preN router support WDS? Were u able to get it all working? I would like to get mine to work thanks!

    OK, that's interesting. I just tried the download site and got this:
    I tried in Firefox and Chrome.
    I have never had a problem downloading iTunes before, I think it may be a temporary glitch.
    You shoudl probably wait a bit and try again. Meanwhile I will try to find out if there is a known problem.
    However it still might be security software messing up access to the download.
    Added:
    After checking, it appears that others are having the same problem. It has been reported to hosts, so hopefully it will be fixed soon.

  • I keep getting check internet connection errors when uploading to YouTube. Why?

    I created a keynote presentation with audio and pictures with some animation of words.  I am trying to upload it to YouTube through the share button.  It takes a couple minutes to "process the video". Once that reaches completion an error message (yellow triangle with a tiny keynote icon) pops up saying unable to upload. Check internet connection and try again.  I've tried again and again and again getting closer to my router.   I am using my MacBook Pro Yosemite and recent update of keynote.  My file is around 40mb.  Why won't it upload?

    There has been an outage for both iMessage and FaceTime today.  Started at around Noon time, PDT.
    There is nothing you can do from your end, this problem is on Apple's servers.
    Click below for Apple's System Status:
    http://www.apple.com/support/systemstatus/

  • Internet connection loss when not in use

    Hi, earlier this week I picked up a Mac Mini G4 running Mac OS X 10.4.11. I have it plugged into the interwebs through it's Ethernet port. The cable runs straight into a DSL modem. The modem seems to be working fine. All lights are on as they're supposed to be. When the internet is in use, the computer browses the web just fine. When left alone for a bit, the computer loses it's connection to the internet. The connection is also lost when the computer is in use but the internet is not being used (tying in Word, fiddling with Garageband for a long time etc). In the system preferences, under network, the status of the Ethernet flashes between "Built in ethernet is currently active and has the IP address ..... You are connected to the internet via built-in-Ethernet." and "The cable for built in Ethernet is not connected." Halp!

    I am having an identical problem. When I go to the network settings - choose built in Ethernet - then connect - it processes and connects using the PPPoE password settings. I can then surf on safari or firefox. If I log off either or put the computer to sleep, when I log back on all settings are lost and I have to go thru the whole process again. Vianet said not their problem. Belkin said not router problem as Internet lights are all active. But if I use the airport utility I get zero Internet. What can I do? Mac mini is from 2005. Also 10.4.11.

  • What to do when you have internet connection but go to use an app, you get the Error message, 'An error occurred connecting to the server. Please make sure you have an internet connection' ?

    Yesterday, I downloaded the twoignite app. When I went to open the app to use, this error message appeared: An error occurred connecting to the server. Please make sure you have an internet connection. I checked my connection and found I had a solid connection. I have tried closing the app and reopening it; deleting the app and redownloading it (more than once); turning off my iphone and turning it back on. None of these things have worked. Thanks.

    Have you already seen this:
    http://forums.adobe.com/message/5099439#5099439
    Maybe you could also try asking in the kuler forum.

  • How can you get your ipod touch open when you forgot the password and its disabled and not connected to wifi

    How can you get your iPod touch open when you forgot the password and its disabled and not connected to the Internet Connection and you don't want to reset it.

    Disabled
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Forgot passcode or device disabled
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:                                                             
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes       
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:                         
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

  • Hi, i have a doubt, i want my pdf files to be sync with the cloud but im afraid they wont open when not connected to the internet so my question basiclly is¿ can i store the documents on my device sd and edit them and when i get a internet connection they

    Hi, i have a doubt, can i have my pdf files on my sd, edit them while in class with no internet connection and when back online they will sync, all i want is to able to open my files without wifi and edit them but when back online sync their changes so i can see them in other device

    You can cache the cloud documents that you most often read by opening them once when the network is available. Edits made to these documents would be automatically synced back to the cloud if the network is available. If for any reason the network is not available, these would be synced the next time network becomes available.

  • I have a macbook 10.6.8  I am getting a internet configuration page when i try to boot safari.  How so i get rid of this page.  Thank you.

    I have a macbook OS X  10.6.8.  I was messing around with java yesterday and now I get a Internet configuration page when I try to launch safari .  How do I get rid of this.  Thank you.

    Can you post a screen shot?

  • Updating firmware when I can't get an internet connection through the router

    I am trying to update the firmware for WRT54G V8, but some of the instructions indicate I need to have the router connected and be connected to the internet.  I cannot get an internet connection through the router.  Can I upgrade firmware without being connected to the internet through the router.  (I have had this router for about a year and a half with no problems until now.)

    Yes, you can upgrade the firmware without an Internet connection.
    To upgrade the firmware, first download the new firmware into a computer that you can wire to your router.
    Next, power down your entire network.
    Then wire the computer to a LAN port on the router.
    Disconnect all other wires from the router.
    Power up the router and allow it to fully boot (1-2 minutes).
    Power up your computer.
    Login to the router, and do the firmware upgrade  (it will likely take several minutes).
    Power down your entire network.
    Next you need to reset the router to factory defaults.
    To reset your router to factory defaults, use the following procedure:
    1) Power down all computers, the router, and the modem, and unplug them from the wall.
    2) Disconnect all wires from the router.
    3) Power up the router and allow it to fully boot (1-2 minutes).
    4) Press and hold the reset button for 30 seconds, then release it, then let the router reset and reboot (2-3 minutes).
    5) Power down the router.
    6) Connect one computer by wire to port 1 on the router (NOT to the internet port).
    7) Power up the router and allow it to fully boot (1-2 minutes).
    8) Power up the computer (if the computer has a wireless card, make sure it is off).
    9) Try to ping the router. To do this, click the "Start" button > All Programs > Accessories > Command Prompt. A black DOS box will appear. Enter the following: "ping 192.168.1.1" (no quotes), and hit the Enter key. You will see 3 or 4 lines that start either with "Reply from ... " or "Request timed out." If you see "Reply from ...", your computer has found your router.
    10) Open your browser and point it to 192.168.1.1. This will take you to your router's login page. Leave the user name blank, and in the password field, enter "admin" (with no quotes). This will take you to your router setup page. Note the version number of your firmware (usually listed near upper right corner of screen). Exit your browser.
    If you get this far without problems, try the setup disk (or setup the router manually, if you prefer), and see if you can get your router setup and working.
    If you cannot get "Reply from ..." in step 9 above, your router is likely dead. Report back with this problem
    If you get a reply in step 9, but cannot complete step 10, then either your router is dead or the firmware is corrupt. Report back with this problem.
    If you need additional help, please state your ISP, the make and model of your modem, your router's firmware version, and the results of steps 9 and 10. Also, if you get any error messages, copy them exactly and report back.
    Please let me know how things turn out for you.

  • HT4914 can you download songs from itunes match from the cloud to your iPhone ie for times when you dont have internet connection

    can you download songs from itunes match from the cloud to your iPhone ie for times when you dont have internet connection?

    Unless you have an Internet connection you cannot access iCloud. You can download your music from iCloud to store permanently on your iPhone, but only when you have an Internet connection to do so.

  • Why do i keep getting the "internet connection timeout" error message?

    i have been upgrading a few standard itunes albums to itunes plus versions through my 3g mobile broadband connection, while not exactly a fast process, it was working fine until i started to get a backlog of 3 or 4 albums which were waiting in a queue to be downloaded, now every time i do the "check for downloads" option i get the "internet connection timed out" error message...this has been going on for 2 days! am i right in suspecting the backlog of albums is too much for my 3g mobile broadband connection? this is really doing my head in, if any of you techies could help me, it'd be much appreciated...?

    yes i have recently updated to itunes 8.2.1, but i am starting to think its apple's servers (i tried to download at my brothers house...different computer and connection...same connection timeout error), because it will still let me download an album, but not necessarily all of the tracks. when i questioned itunes customer services about the seemingly hit and miss state of affairs with downloading, they told me to wait 3 weeks before trying to download the tracks that were giving me the grief (2 tracks from an arctic monkeys album)...which kinda indicates they know there is a problem and are trying to fix it, why else would they say wait 3 wks??? they gave me 5 free music tracks too, which is handy.

  • Can I create a network where the Time Capsule gets its internet connection from my iMac?

    Hi,
    I've recently bought a Time Capsulebut I'm having some problems with it on my university network. It is an Eduroam network, so each computer has to authenticate before it can get an Internet connection – I can't use the Time Capsule normally as it is unable to authenticate to the network. However, I'd like to be able to create a smaller network in my room (with my computer and iDevices on so that I can use Remote and stuff, as well as to potentially get my Xbox and Kindle,which can't connect either, online).
    Last time I did this, I had my iMac create an internet connection which it shared with everything else. (This was before I had the Time Capsule.) One way of solving it seems like it might be to share the Wifi internet connection with the Time Capsule through the ethernet, and then the Time Capsule can share the interent to everything else. Would this be possible? Or can you think of any other way that this could be done?
    In other terms, I have an iMac, a Time Capsule, an iPhone and iPad, a Kindle and an Xbox. Only the iMac can connect to the internet and I'd like them all to be able to, as well as being on the same network. Is this possible?
    Thanks!

    DropBox is another possibility for sharing files and it is free for the first 2GB of storage.
    Lou Picinich
    Member Apple Developers Network
    Certified Member Apple Consultants Network
    ACSP 10.5 → 10.7, ACTC 10.5 → 10.7
    ACS Security & Mobility 10.6
    Mobility Technical Competency
    [email protected]
    www.SystemXperts.com
    (623) 512-8992

  • How to configure my netwok in solaris 10 to get an  internet connection

    Hi,
    I am new to this forum and to Solaris in general. I am sorry if this question was asked and treated before.
    I just successfully installed Solaris 10 on an intel based workstation. I have an ip address that shows that is "**static**". I have a Fios router which i can get to from Mozilla firefox by opening 192.168.1.1 but i cannot get an internet connection even to register my copy of of Solaris or to get updates.
    In the network proxy configuration, I selected : Direct internet connection. My Ip address is 192.168.1.2. I believe it shoub be dynamic not static and if it is true how to cdit the settings to use DHCP. Your help is very appreciated. Thank you in advance.
    Aerkadri

    If you want your Solaris system to use DHCP, the cleanest way to do this is to run '/usr/sbin/sys-unconfig', let the system reboot, and tell it to use DHCP when it asks you to set up networking.
    Mark

  • How easy is it to plug a windows laptop into the ethernet port of a Time Capsule and for it to get an internet connection?

    I use Time Capsule to distrubute wifi thoughout my home.  I have an office laptop (windows) that my company's IT dept won't install a wireless card in (for security reasons????).  Can I get an intenet connection to the laptop if I connect it to an ethernet port on the back of the TC?

    Can I get an intenet connection to the laptop if I connect it to an ethernet port on the back of the TC?
    If you can get an Internet connection when you test using your iMac's Ethernet port, then you know that the Ethernet port is working on the TC and the Ethernet cable is also working.
    You should be able to get a connection on any other computer in the same way.
    If you cannot get an Internet connection on the PC with the same hook up, then you will need to do some troubleshooting on the PC....or call the IT guys at the company to find out what type of block they may have on the PC.

  • "Connection error. Check Internet connection." when trying to Enable Web Services on HP 1606dn

    Error message "Connection error. Check Internet connection." when trying to Enable Web Services on HP Laserjet 1606dn.
    Operating system: Windows 7
    Thanks for helping,
    Howard
    UPDATE 21-7-13: After upgrading the firmware to the lastest version, I could enable web services. Big help was this video: http://www.youtube.com/watch?v=Q5gpIGZXDXw
    This question was solved.
    View Solution.

    Hi,
    Please try the following.
    1. Open an internet browser type printer's IP address.
    2. Should bring you to the printer's status page.
    3. Select the networking tab at the top.
    4. Left hand side select IPv4 under wireless.
    5. Under DNS address Configuration select Manual DNS Server.
    6. For Preferred enter 8.8.8.8
    7. For Alternate enter 8.8.4.4
    8. Select apply. You might get a warning saying this could interrupt connection that's fine.
    9. Turn printer off for about 30 seconds then try again.
    Although I am an HP employee, I am speaking for myself and not for HP.
    --Say "Thanks" by clicking the Kudos Star in the post that helped you.
    --Please mark the post that solves your problem as "Accepted Solution"

Maybe you are looking for

  • Column name in ALV table dissapeared after new language package installatio

    Hi, We have a custom field in an ALV table in SAP system. In english everything was just fine with our custom field. But when we installed a new languaged the column name dissapeared. My question is: Where does the ALV get the column name from? Is th

  • Import iPhoto Title as Aperture Version Name?

    QUESTION: How do you import your iPhoto library such that the Titles you've applied in iPhoto become the Version Names in Aperture? DETAILS: Upon import, Aperture ignores my custom iPhoto Titles ("Lunch at Summit", for example) and replaces them with

  • Binary Tree    (insert level by level)

    Hello, I'm trying to program a binary tree. It's totally clear for me to insert new (Integer) Values in an ordinary binary tree. I simply have to check if the root is equal (--> ready) smaller or larger than the value. I repeat this until I reached a

  • New To Logic need help using drum samples.

    Hey guys im extremly new to logic actually this is my first trip into a mac doing pro audio. Ive been using windows in my studio for years and im trying to learn the ins and outs of Logic right now. My question is im using a set of samples (trigger t

  • Audio CD Burning with itunes

    I am using the Mac OS X 10.5.6 Using the itunes 6 (6.0.5) I have set the payback crossfade to my liking & it works great as a jukebox if U like But.... Can I do the same cross fade in the CD audio burning process????