Do you have an ABAP sample which launches workflow(s)?

Hello friends,
Do you have an ABAP sample code which populates containers and launches workflow(s) afterwards? A sort of driver program.
Your help is greatly appreciated.

You can search this forum
You can start a Workflow using FM
SWE_EVENT_CREATE
SAP_WAPI_CREATE_EVENT
provided an event is maintained as a triggering event of wflow or you can directly start a wflow using FM
SAP_WAPI_START_WORKFLOW
Give a search in this forum you will get lots of example.
Thanks
Arghadip

Similar Messages

Once you have downloaded ESX24 samples from the internet how to you get them on to logic to use them ?

once you have downloaded ESX24 sample packs from the internet how do you get them on to logic so you can use them ?

Mac App Store: Hiding and unhiding purchases
http://support.apple.com/kb/HT4928

Is it better for your battery if you let it run down all the way and then charge it? Or to charge it whenever you have the opportunity? Which is better for the life of the battery?

I was wondering it the life of the battery would last longer if you let the battery run down all the way and then charge it? Or to charge it whenever you have the opportunity even if it doesn't have a low battery? Which is better for the life of the battery and prolong the life of the battery?

I've had a iPhone 4s since March 2012, and it's battery is pretty useless now. I was using the app Battery Doctor (Battery Saver, Battery Life) by Beijing Kingsoft Internet Security software, which encourages the user to charge more often, whenever battery life drops below 100% full and greater than 20% full, and gives ratings according to the number of full, partial & overcharges done, but I'm concerned that charging like that actually results in worse battery life??
I now have an new iPhone 5 and don't want the battery to only last as short as the last one did
Any advice/comments please

You have chosen to open which is a: application/octet-stream error

I have been getting his error for a very long time now:
you have chosen to open (web address here) which is a: application/octet-stream ehat should firefox do with this file? open - save
i got this from firefox 3, i tried completely uninstalling it, and then reinstalling it
and the same thing happens in firefox 4, which i just uninstalled firefox 3 and did a clean install of firefox 4
it happens randomly and periodically, it seems each new session resets the warnings, and when i click on about 35% of the websites in my speeddial, it will load that warning and a blank tab, after i click the speeddial again, it will work for that site, for the rest of the session..
it seems completely random, sometimes its google.com, sometimes mozilla.com, it could really be anything..
it could be a website in my speeddial, but it also happens sometimes when typing from the address bar
i have done extensive spyware sweeps, and antivirus sweeps for anything out of the ordinary, and i even repaired Windows XP SP2, and then I even upgraded to Windows XP SP3, i have all the updates, etc..
I have 2 computers on this network, and they both do it.
its really driving me crazy.. i even thoght about wiping my entire hard drive and reinstalling XP, but i dont want to do that
i tried IE8, but i hated the lack of speedials and tab options
and I tried Opera but i hated the fact that there were no multiple speedial tabs
and im not fond of chrome or safari for similar reasons..
i've tried a few things i've found online, but nothing really applies to this problem
does anyone have any idea how to fix this so i can keep using firefox?
thanks

Show us the output of
emctl status dbconsoleMost of the times, EM stops with DGCP being enabled on the system after the db's creation. I faced alot of it just 2 days ago when 2 of my boxes stopped EM. So show us the output of the above command and to have an idea of basic EM troubleshooting, read this,
http://oracle-base.com/articles/misc/BasicEnterpriseManagerTroubleshooting.php
HTH
Aman....

ASUG Presentation - April 2007 - Do you have the ABAP Classes presentation?

Hi all,
does anyone have a copy of the ASUG presentation that supported the session:
"Classy Workflows: Moving from Business Objects to ABAP Classes - practical examples, and case studies, for using ABAP Classes in Workflow applications".
Can you please send it to [email protected]
Much thanks and regards,
Cristiana

Hi there
In Captivate, try opening the preferences by pressing Shift+F8 and navigating to the Project > Start and End and clearing the Auto Play option. Re-publish and re-insert into the PowerPoint and see if that helps.
Cheers... Rick
Helpful and Handy Links
Begin learning Captivate 5 moments from now! $29.95
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcererStone Blog
Captivate eBooks

Do you have any question for us?

At the end of interview most employer as this, what could be question to ask to for good impression on Oracle DBA interview?

A couple of questions come to mind.
1) How did this position become available?
2) What major challanges are you facing or new projects you have coming up with which you hope I can help.
3) Where do database administrators fit in your organization structure -- some organizaions put them in infrastructure support, some in application development, some in operations. You also want to know how many levels down from the CIO is the DBA -- this will help you guage your ability to be visible to higher levels of management; the closer you are to the CIO the more visible you will be.
4) How the change controll process works -- you want a fairly formal and tight process so that only approved chages are implemented. Otherwise your life can be full of grief. Also helps you understand your roll in the process.
5) Does the DBA provide internal consulting services such as data model review, applicaion and query tuning, process model review and advice,,,,
There are others too, but you want to understand as best you can your future working environment and the expectations the company will have of you.

"Use Toolkit Package" and "Gather" - When do you have to run them?

Greetings,
I have inherited a huge task sequence (MDT 2012 integrated with SCCM 2012) that calls "Use Toolkit Package" and "Gather" many many times even though there are only a few reboots.
Is it true that the "Use Toolkit package" step (followed immediately by Gather) only need to be run right at the beginning of the TS and only after every reboot?
Is it also true that the "Gather" step on it's own only needs to be run when you have run another step which may alter/create a variable which is used in the rules? (i.e. customsettings.ini).
Thanks
David Z

Thanks.
My question was when exactly do you need to run the steps. I suspect that many people have task sequences with loads of "use toolkit package" and "gather" in places when they are NOT needed.
First let's look at the step "Use Toolkit Package". There is no reference to that task sequence step in the MDT documentation. Im aware that this simply copies the "deployment share" so all the scripts etc that are necessary for future task sequence steps
are available (In MDT only environments this was not necessary as the UNC path to the deployment share was always available - so this is an SCCM only step). Your reference states that it copies it to the local hard drive. This is not entirely true. I understand
that when Winpe is loaded, it is loaded into a ramdrive and therefore my "Use Toolkit package" step which is the first in the task sequence is loaded somewhere into the "RAM" drive (probably under "X" drive somewhere?).
So my assumption is that "Use toolkit package" must be run as the first task sequence step, then any time immediately after the winpe system is restarted. If, during winpe and before the OS is loaded onto the hard drive, you format the hard drive (which
is often the case), you do not need to run "Use Toolkit.." as it still exists in the RAM drive. When you apply the OS and restart, and then run "Use toolkit.." again, it must magically work out that it is to then load to the hard drive and not the RAM drive.
However, once the "deployment share" has been loaded to hard drive, Im assuming that you never need to run the "Use toolkit.." again even if the system restarts as once it is loaded to the hard drive, it remains there (assuming you dont format disks again
which is unlikely after the OS has loaded).
The answer to "when must you run Gather" is alot trickier. The first assumption is that Gather has to be run immediately after "Use toolkit..." as the system has initialised or restarted and none of the variables created by "gather" exist.
Im guessing that "gather" may need to be run when you suspect that something in the rules file has changed. For example, you may have run a task sequence step that sets variable "A" for the first time. Your rules file may generate another variable, "B",
based on variable "A" so "gather" must be run to evaluate "B".
However, once the OS has loaded and "gather" has been run, the variables.dat file is created and remains permanently on disk so that if the machine is restarted again, you dont have to run "gather" as all the variables persist in variables.dat.
All of the above is an educated guess as I have searched the web extensively and have not found a definitive explanation. I would be grateful if anything above could be confirmed/denied so this could remain as a definitive guide that may not help just
me, but others :-).
Thanks
David Z

Team Purchasing - does it with with ACW or do you have to use PCW

SAP notes say that you have to use the process-controlled workflow framework to use team purchasing. Team purchasing is not available with the application-controlled workflow framework.
Has anyone managed to get team purchasing working in SRM7 using ACW? If so, how?
Thanks
Neil
Edited by: SB P-to-P on Nov 22, 2011 11:46 AM

Hello,
It is not supported to have team purchasing with application controlled workflow.
This is stated in the following documentation link:
http://help.sap.com/saphelp_srm701/helpdata/en/8e/1753cca4a6450784f3e2d1ecf6b09a/frameset.htm
Regards,
Ricardo

TS1538 Hi, I have the problem which iTunes cannot detect my iPhone 4s. I tried the steps you have provided in your troubleshooting, but it won't work for me because the Apple Mobile Devilce is perfectly installed on my windows.

Hi, I have the problem which iTunes cannot detect my iPhone 4s. I tried the steps you have provided in your troubleshooting, but it won't work for me because the Apple Mobile Devilce is perfectly installed on my windows. However, the driver "Microsoft teredo Tunneling adapter" has a yellow exclamation mark, which i believe means it's not installed correctly or something is wrong with it. This driver is under the Network Adapters (Please see picture below).
This is what happens when I connect my iPhone 4s to my laptop (Windows 7 Starter 32-bit)
1. The phone charges it's battery
2. I can open it in My Computer and import/export media files.
In iTunes
3. It start to sync until step 3 then stops.
4. The iPhone option with an arrow appears beside the iTunes Store, but when the arrow is clicked it disappears.
I hope you can provide me a solution for this problem.
Thanks,
Ralph

Hi ralphagir,
Welcome to the Apple Support Communities!
For your iTunes issue with it not recognizing your iPhone, I would go ahead and suggest deleting iTunes and all of its components from your Windows computer and installing fresh.
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Remove iTunes and related components from the Control Panel
Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
As far as the arrow button that you click and the iPhone disappears, it sounds like you may be clicking on the eject button. Please take a look at the following article for information on the eject button in iTunes.
Safely disconnect iPod
http://support.apple.com/kb/HT1853
Have a great day,
Joe

I have a php module which runs fine in Firefox and all other browsers but not Safari. It always run twice - I see a small ? in upper right corner which is causing it to run twice but NO idea why? Help - thank you

I have a php module which runs fine in Firefox and all other browsers but not Safari. It always run twice - I see a small ? in upper right corner which is causing it to run twice but NO idea why? I read it MAY have something to do with am image it cannot load but I see them all loaded. Help - thank you

Could you share a link to the page?
Seeing it in context and in our browsers is much easier to debug.
If not, make sure to run the validator here The W3C Markup Validation Service and clear out any problems. HTML errors, especially structural ones, will cause all kinds of display problems in various browsers/versions/platforms.

I have an iPod 80gb which charges and looks to play tunes though nothing comes out of head phones docking stations etc. Can you point me in the right direction please?

I have an 80GB iPod which charges and looks to play tunes though nothing comes out of ear phones,speakers or docking stations. Can you please help me fix this?

Hello lowe-m1,
Thanks for using Apple Support Communities.
For more information, take a look at:
iPod troubleshooting basics and service FAQ
http://support.apple.com/kb/ts1382?viewlocale=nl_nl
The headphones don't work
If your iPod's headphones don't work or have static or garbled audio, try connecting them to any other 3.5 mm stereo headphone jack, like the one on your computer. If the issue with the headphones persists, replace them. For an iPod under warranty, you can order a replacement online. Otherwise, check out the cool headphones at theApple Online Store. If the issue appears to be with the iPod, try resetting it. If that doesn't work, then restore iPod with the latest iPod software using iTunes 7 or later.
Have a nice day,
Mario

HT1311 can you see which device bought something on iTunes where you have multiple devices on the same iTunes account?

is there any way to find out which device dowloaded apps when you have multiple devices using the same itunes account?

The purchase information does not include the device used, but does include the Apple ID used for the purchase.
Apps downloaded on one device with the same Apple ID can be downloaded on another device with that Apple ID.

Do you need to use an email as an apple ID? We have a family email which is currently the apple ID so I can keep track of purchases but i have 2 iPhones and 2 itouches. Can all 4 devices have different apple ID under the same email address. Also for th

Do you need to use an email as an apple ID? We have a family email which is currently the apple ID so I can keep track of purchases but i have 2 iPhones and 2 itouches. Can all 4 devices have different apple ID under the same email address. Also I wanted to know because for the game center we wanted to keep track of each individual not just o e account. DID I MAKE SENSE

Figured it out. Thanks.

Can you have multiple Apple TV's in the same house and network? If so how do you know which one to pick from your Idevice?

can you have multiple Apple TV's in the same house and network? If so how do you know which one to pick from your Idevice?

Yes, there are even defaults for naming them, such as LivingRoom, Bedroom, etc, or you can even enter your own name with the remote for each AppleTV.

Can you buy Creative Cloud for a single month? Or do you have to buy the membership which lasts a year? If so can you cancel the membership after a month and only pay for that month.

Can you buy Creative Cloud for a single month? Or do you have to buy the membership which lasts a year? If so can you cancel the membership after 1 month and only pay for that month?
Thanks

Hello Tom,
You may sign up for a free trial of creative cloud which you can check out here. Download a free trial or buy Adobe products | Adobe downloads
You may either pay for a month to month membership or annual as listed here. Creative Cloud pricing and membership plans | Adobe Creative Cloud
Let us know if this helps!
Thank you,
Jo-Marie

Do you have an ABAP sample which launches workflow(s)?

Similar Messages

Maybe you are looking for