Do you have pop sound from speakers in Leopard ?

hi,
after using my macbook pro for 5 days, that known pop sound started to appear from my left speaker. I have read posts people experiencing this issue under Tiger but is it still there in Leopard ? and is this a hardware or software problem ?
tks

I'm sorry that I'm not posting an answer for you, but I'm posting to say I had this happen to my MacBook Pro today. I upgraded to 10.5.4 about a week ago and this came out of nowhere today. I accessed a web site that had sound, so I know I had sound earlier today. A while later I heard a pop from the computer. Then about a half-hour later, I realized I wasn't hearing sound any longer. I hit the volume up/down keys and saw the visual clue that the sound level was changing, but there wasn't the usual beep to confirm the volume level. I pressed the mute key and heard the pop again. Every time I pressed mute, I heard the pop. There was no sound otherwise.
I confirmed that I could still hear sound through the headset output and shortly after that, the speakers started working again. I haven't had another problem since then. I wonder if plugging in headphones and unplugging them reset whatever was going wrong with the internal speakers?
Regardless, I hope someone posts a definitive answer soon.

Similar Messages

  • Hi, I have ProBook 6450b, I have no sound from speakers, Everything in device manager is true

    what can I do?

    Hi,
    Please enable Speakers in Playback devices as follows:
    1. Right click speaker icon (right hand corner)
    2. Select Playback devices
    3. Right click Speakers
    4. Enable it and set as Default
    5. Click Apply/Ok
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Ive got an mac book pro i bought the lead to connect to tv but is there a lead where you can have the sound from the tv and not through the laptop?

    ive got a mac book pro i bought the lead to connect to the tv but is there a lead for the sound to come out of the tv and not the laptop?

    Depends which Macbook Pro, depends what cable you have. MBPs from 2010 onwards can transmit audio through their Displayport connectors if you have an HDMI input on your TV and an adaptor which also transmits audio. Not all Displayport-HDMI adaptors do this. If you're trying a VGA input on your TV, that will not carry audio.
    If your MBP is older than 2010, you will need to use a separate audio cable to connect from your computer's 3.5" mini audio connector to the appropriate audio input on your TV.
    Matt

  • Why do we have pop ups from google? How do you stop them entirely, it's annoying

    Why do we have pop ups from google? How do you stop them entirely, it's annoying. I use the iPad 2' with the most current version of software

    The contacts app is nothing more then looking at the contacts from the phone app.
    What's the story here?"
    The forums would be full of people complaining that you had to go through an additional step ( opening the phone app) to get to contacts.  I use the contacts app from the home screen far more often then I use it in relation to calling someone.
    I like the way it is far more than the way you propose.
    You can leave feedback for Apple at:
    http://www.apple.com/feedback

  • My iphone5 does not have any sound from the speakers ringtones or music any suggestions?

    my iphone 5 does not have any sound from the speakers any suggestions on what culd be the problem and hopefully a fix

    Just to add to this I can hear through the small speaker and the headphones it is just the speakers for ringtones and music etc

  • HT4623 Hi I have just updated ipad to latest software and since then I can't get any sound from speakers only ear socket or FaceTime works fine any ideas thanks Mark

    NO sound from speakers after update only headphone jack works, speakers work on FaceTime
    many thanks Mark

    Reboot the iPad and see if that helps.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • No sound from HP G62 laptop and can no longer get sound from speakers or headphone jack . USB sworks

    have an HP G62 laptop.  I can no longer receive sound from speakers or from headphone jack.  If I plug speakers into usb - I will get sound.  Any ideas?

    I don't think I have anything to offer that you haven't done. In Device Manager, Device status says "working properly" and you've reinstalled this driver.
       Realtek Audio Driver for Windows XP
    Right?
    The only other thing I know to do is restore the hard drive to its original factory fresh contents.
    -Jerry

  • Sound from speakers as well as headphones after bios update in pavilion g4 1121 tx laptop

    Dear madam/sir
    after performing a bios update as sugested by hp support assistant I am getting sound from speakers as well as earphones .I stay in a small town and there is no hp centre nearby .I am a student staying in hostel where i cant play sound through speakers as it disturbs my room mates .Kindly assist .
               product details
    product no  ; QB404PA#ACJ
    product : hp pavilion g4 1121 tx
    purchased : sept 2011
    Thank You

    Hi @satyakam 
    Welcome to the HP Support Forums!
    I understand that you are enjoying your sound  from everything today. I am happy to help.
    If you have a sound application installed along with your sound driver, then I would check the settings for the speakers and headphone in that application.
    Then I would make your headphone the default device when it is plugged in.
    To make headphone as the default device
    1.    Click on Start; Go to Control Panel.
    2.    Click on Sound.
    3.    Switch to Recording.
    4.    Select your microphone/headset as the default device.
    5.    Save the changes by clicking on OK.
    Also you can Uninstall and re-install your audio device drivers, to do that:
    1.    Click on Start; in the start search type “devmgmt.msc” without quotes and press Enter.
    2.    Expand Sound, Video and Game controllers.
    3.    Right click on the audio component and then click uninstall.
    With the driver uninstalled then download and re-install the driver from:
    HP Pavilion g4-1121tx Notebook PC Drivers
    Just be sure to select the correct operating system from the drop down, and click next, which will refresh the list of drivers below.
    Let me know if that helped at all.
    Malygris1
    I work on behalf of HP
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • No sound from speakers or headphones on my hp pavilion dv6-6c50us

    no sound from speakers or headphones on my hp pavilion dv6-6c50us.  Speakers are not muted and volume is up.  May have happened after a system update

    Hi,
    Try the following.
    Download the relevant IDT Audio installer on the links below and save it to your Downloads folder.
    IDT Audio Installer - Windows 7.
    IDT Audio Installer - Windows 8.
    When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers.  Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
    When complete, shut down the notebook, unplug the AC Adapter and then remove the battery.  Hold  down the Power button for 30 seconds.  Re-insert the battery and plug in the AC Adapter.
    Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu.  Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter.  Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
    Let Windows fully load - it will automatically load an audio driver, but just let this complete.  Then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation.  When this has completed, right click the speaker icon in the Taskbar and select Playback Devices.  Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if you now have audio.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • No sound from speakers 2-IDT High Definition Audio Codec

    1. ProBook 6550b
    2. Windows 7 Professional SP1
    3. No error
    4. No any changes in Operating System
    5. No sound from from speakers 2-IDT High Definition Audio Codec. I have sound from speakers only(!) when Skype starts or somebody calling me by Skype regardless headphones connected or not (Skype settings).
    All other time I can hear sound only from headphones regardless headphones(RTC) connected or not.

    Good Evening,
    Did you get this fixed I have exsactly the same issue? Two rebuilds and a new motherboard and Im still stuck
    Thanks
    Paul

  • Audigy 2 zs - moved pc from one room to another and now no sound from speakers (headphones

    As the title says,
    I just completed moving my pc from one room to another. Low and behold I get no sound from speakers (just some stereo speakers with powered sub). I do get audio out of the headphones (fully disconnect headphones from front panel when attempting to get sound from speakers). I know this probably points to a faulty speaker setup but that's pretty straight forward and looks to be fine.
    Anyone encounter this problem before or have any suggestions?
    Thanks!

    Mr. Jefferson, Thanks for the quick response!
    A mystery!  Usually, it's easiest to have FiOS patched into your home's cable TV wiring, so I'm curious why you don't have a coax router that provides you with the ethernet (internet) jacks.  Some questions:
    Do you watch TV from some other source (like satellite or cable TV) but are using FiOS only for Internet?
    I have both fios tv and internet
    You said 2 cables are going from your router to a box in the wall.  What are the 2 ports labeled on the router?
    One of them is just the main "internet" port I guess you could say while the other is just one of the ports labeled 1-4 (plugged into #2 I believe)
    Is there any labeling on the jacks on the wall box?  On the other box in your room?
    On the wall box in this room theres labeling on the jacks on the wall box that says IN and OUT (in marker), while in my room there's the same box but with only ONE, unlabeled jack (I think there's supposed to be another jack but it seems to be closed/sealed off)
    Do you know where the Internet jacks connect to? Like a patch panel or box somewhere in your garage or near where your FiOS/cable tv/phone service is?  Somewhere these cables have to terminate.
    I believe they somehow connect to this box in my garage (did some research and I believe it's called the ONT? and there's another box below it which I believe is the battery)
    Hope this info helps!

  • A1000L IdeaPad No Audio Sound from Speakers

    Our IdeaPad A1000L was working great for a while, but now it will not produce sound from the speakers.  At first I assumed I somehow had it set to silent even though the volume bar was all the way up.  I reset all my audio settings.  Then I realized the audio works fine from headphones.  I did a full reset on the tablet, and still no sound from speakers -- only from headphones.  I have read a similar thread where it was suggested that this might be caused by damage to the headphone port, but I rarely use headphones, and don't think I'd ever used them before with this device.  Still, I tried jiggling the headphone thing around in there like suggested and it's still not working.  When I look in there with a flashlight, it looks exactly like the inside of the headphone port on our other IdeaPad.  Is there anything else I can check/try before taking it in for service?

    Hello rkrohatgi,
    Thank you for the details of the issue you are experiencing and the troubleshooting steps you have already taken.  It sounds like you are seeing a screen similar to this when trying to adjust the volume:
    I recommend the following steps for an issue like this (you can skip any of the steps you have already taken):
    Verify that the volume is set to a level you would normally be able to hear.
    Ensure that there is nothing plugged in to the headset jack or the dock connector.
    If the iPhone is in a protective case, make sure that the speaker port isn't blocked by the case.
    Make sure that the speaker and dock port aren't clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush. Carefully and gently brush away any debris.
    If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
    If the iPhone is paired with a Bluetooth headset or car kit:
    Try turning off Bluetooth.
    If you experience difficulties with the Bluetooth feature, followthese troubleshooting steps.
    Restart the iPhone.
    If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
    If the issue is not resolved after restoring the iPhone software, please contact Apple Support.
    You can find the full article here:
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • No sound from speakers, only subwoofer after restore to factory

    I recently restored an HP pavilion dv7 back to factory settings using the built in hp restore. When it came back, sound will only play through the subwoofer. When I do sound tests, I hear both channels play, but they play through the one "triple bass reflex subwoofer" on the bottom of the laptop. Nothing coming from the two speakers in the front at all. 
    I have uninstalled the IDT drivers multiple times using the current drivers, the original drivers in the swsetup folder and many drivers in between from HP's ftp site. No luck. I'm pretty much out of ideas. It's clearly a software or driver issue as they worked before the reset but I have no idea what else can be done about it.
    HP tone control is installed, the beats audio panel is visible, IDT audio shows up in appwiz. Ive seen a few forum posts about this same issue but nothing that ever seemed to get resolved. 
    Any ideas? I've included some screen shots of what I'm seeing

    Hi @etainw ,
    Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion dv7-4000  Notebook and issues with no sound from speakers, only subwoofer after restore to factory. Here is a link to troubleshoot the Subwoofer on Beats Notebooks. On the Enhancements tab, select the Bass Boost option, and verify the device driver is Enabled, this should help.
    Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system at the time of purchase.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • TS1630 Hi I have a problem with my iPhone 4S,  I have no sound from my speaker ,keyboard or notifications ,  and my volume control buttons are not working is anyone experiencing this? Any help would be great full, also I have reset the iPhone many times.

    Hi I have a problem with my iPhone 4S I have no sound from my speaker , keyboard, notifications.   or volume controls,  I have reset my iphone many times and still the same, any advise will be greatful
    Thanks

    I don't think that a software update from Apple will solve the issues that you are having. You have a rogue installation. After you posted I have just done the following:
    Disk Utility can verify  my partitioned Volume (including my boot disk) AND REPAIR the non-boot disks on the same Volume without a glitch. It repairs the non-boot disks containing data smoothly.
    I have used Mail to send some mails from some Yahoo and Hotmail accounts to my Thunderbird client containing GMail accounts - absolutely normal.
    I have iLife '09 but my iMovie '09 and iPhoto '09 open in a jiffy and I see no issues here. I have 6GB RAM (Maximum) on an early 2008 Macbook Pro with a 750GB hard drive partitioned with 120GB reserved for the Boot Drive.
    I am sorry that I cannot help further but I am sure there must be a way to reinstall the software without having to revert to restoring your ML backup. I have two clones and if you have such I would attempt to do that through that rather than through Time Machine - that is of course if you have a cloned drive.
    Good luck!

  • Popping sound from right speaker only of imac

    I recently bought a (refurbished) September 2013 model imac 21.5".  Looks great, but only one problem when I play any audio/ video, streamed or local, there come a clicking and popping sound from the right side only. Sounds like fireworks from a distance.  No such noise through headphone.  I tried all solutions suggested on different forums.  No success.  Can someone out there help, before I decide to take it to the apple store or return it?

    By starting a new thread instead of re-viving an old one,
    suggestions would be addressed to you directly...
    However you may choose to discuss the matter with
    an Apple Store specialist or Genius, and contact one
    nearest your location for an appointment date/time
    for someone to perform diagnostic testing. If the unit
    is covered under AppleCare or a the complementary
    warranty at that time, further suggestions for repair
    if needed could be discussed &/or arranged.
    See all worldwide telephone support numbers
    Contact a mobile carrier
    Find an Apple Authorized Service Provider
    Visit an Apple Retail Store
    For Apple authorized Sales, Service, Training, Certification
    and Consulting, see these links to locate sources:
    If you are located in the US, then this page may help:
    https://locate.apple.com/ - (page may default to local)
    If you are in another region or country, then this may:
    https://locate.apple.com/country
    In any event...
    Good luck & happy computing!

Maybe you are looking for

  • How to retrieve a SQL query (in String format) from a PreparedStatement

    Hello all, I am in the process of unit testing an application accessing a Oracle 9i 9.2 RDBMS server with JDBC. My query is: As I have access to PreparedStatement and CallableStatement Java objets but not to the source queries which help create those

  • I can do everything but send texts

    I only got it yesterday and until about 3 hours ago, all was fine. Now I can't send texts. I can do everything else; use the internet, email, receive texts. But I can't send them. I don't know what to do!

  • Error on LR5 Install --  Write Privileges

    OK what's up. I'd like to buy the upgrade!   Chronic error won't let me install.  Install error below. Photoshop Lightroom 5.0 Installer A problem occurred while extracting some files.  Check available space on your computer and the write privileges

  • Application - workspace mapping is gone !

    So, I tried to update the app alias on the application attributes page, and got an error message teling me no page template is defined. Well, there is no option for defining it, so what to do ? I edited the www_flows table, the alias field, thinking

  • Triggers in Weblogic

    Does anyone know if Weblogic will stop running a trigger if it sees that the process is hitting an error everytime it runs? I have a trigger that moves data from one place to another, but will sometimes hit an error. The error is caught and handled s