Do you have to be connected to the internet for the download to complete?
do you have to be connected to the internet for the download to complete?
Sure. Or where else do you think those files would be coming from?
Mylenium
Similar Messages
-
Have recently tried to download multiple files from multiple locations. These files will show up as downloading in the download manager. After 5-10 seconds, the download will slow to a crawl. In the window for the download manager, it will state that the download still has a download speed. When reviewing the time and progress, as well as monitoring my actual inbound/outbound internet traffic, I can conclude the download does not have any actual download speed remaining (that is, 0 kilobytes/sec).
To complete the download, I must manually click on the file being downloaded, force it to pause and then force it to resume. This will cause the download to actually download again for about 5-10 seconds before the download manager states that the download speed is slowing down (when in fact it goes back to 0 kilobytes/sec). This process must be repeated until the file is fully downloaded.
Also observed is that there will suddenly be more of a connection, downloading just a bit of the file, before going back to 0 kbps. This will happen every so often and is much slower than manually pausing/resuming. If left to its own devices for long, it also has a chance that it will decide that the file is complete and report that it has the full file size of the download. Review of the actual downloaded file shows that the file is incomplete for the supposed size of the download.
This should not be an issue with internet usage. There is no inbound/outbound traffic for my connection when the download speeds hit 0kbps. Loading webpages during this time load fine, only the download is unstable.Problem Solved!!! :) No need Of Any AntiVirus !
Got back into '''Firefox 5.0.1''' !!
Its Working Great! -
I am getting on a flight on Saturday and want to be able to download movies to rent before I leave but want to make sure after I download them at home that I don't have to be connected to wifi to watch them.
No, once downloaded you can play it whenever you like.
-
I have problem with my ipad , when i want to update ios 6 to 6.0.1 this message appear " unable to verify update , ios 6.0.1 faild verification because you are no longer connected to the internet" but my ipad is connected . Plz help me .
Not very helpful but I have the same issue. Plugging in and doing the update via. iTunes will probably work but I find that whole experience annoying (downloading apps not on the Mac, etc..)
-
Hello, I have creative cloud installed on my Mac Book Pro - OS X 10.9. 5 When trying to download trial programs, a popup window shows the message " you have been disconnected" Connect to continue. The same message comes after repeated attempt to entering the login and password info. How can I solve this?
Hi Jeff,
Here is the screenshot of the window which comes after any attempt to download a trial version. It is in French, it means you have been disconnected, connect to continue. -
Hi All,
This is my first post to ms exchange forum am getting Log onto incoming mail server (POP3): Your server does not support the connection encryption type you have specified. Try changing the encryption method. Contact your mail server administrator
or Internet service provider (ISP) for additional assistance. in my outlook clients, till last Sunday (12.04.15) my exchange was well & good, Monday morning suddenly the problem started like none of our outlook pop3 clients are able to communicate
with exchange (rest IMAP, SMTP & Exchange accounts are working fine). i have tried with all port no but no luck. please help me to get raid of this one.
Exchange 2013 CU6 with server 2012 Std 64Bit
Thanks,
MuraliDear All,
I have found the solution for above problem, the problem has occur due to PopProxy inactivity
please find relevant exchange management shell commends below.
1. Get-ServerComponentstate -Identity <yourmailserver.com>
Server Component State
yourmailserver.com ServerWideOffline Active
yourmailserver.com HubTransport Active
yourmailserver.com FrontendTransport Active
yourmailserver.com Monitoring Active
yourmailserver.com RecoveryActionsEnabled Active
yourmailserver.com AutoDiscoverProxy Active
yourmailserver.com ActiveSyncProxy Active
yourmailserver.com EcpProxy Active
yourmailserver.com EwsProxy Active
yourmailserver.com ImapProxy Active
yourmailserver.com OabProxy Active
yourmailserver.com OwaProxy Active
yourmailserver.com PopProxy Inactive
yourmailserver.com PushNotificationsProxy Active
yourmailserver.com RpsProxy Active
yourmailserver.com RwsProxy Active
yourmailserver.com RpcProxy Active
yourmailserver.com UMCallRouter Active
yourmailserver.com XropProxy Active
yourmailserver.com HttpProxyAvailabilityGroup Active
yourmailserver.com ForwardSyncDaemon Active
yourmailserver.com ProvisioningRps Active
yourmailserver.com MapiProxy Active
yourmailserver.com EdgeTransport Active
yourmailserver.com HighAvailability Active
yourmailserver.com SharedCache Active
2. Set-ServerComponentState -Identity <yourmailserver.com> -Component PopProxy -Requester HealthAPI
-State Active
3. Get-ServerComponentstate -Identity <yourmailserver.com>
Server Component State
yourmailserver.com ServerWideOffline Active
yourmailserver.com HubTransport Active
yourmailserver.com FrontendTransport Active
yourmailserver.com Monitoring Active
yourmailserver.com RecoveryActionsEnabled Active
yourmailserver.com AutoDiscoverProxy Active
yourmailserver.com ActiveSyncProxy Active
yourmailserver.com EcpProxy Active
yourmailserver.com EwsProxy Active
yourmailserver.com ImapProxy Active
yourmailserver.com OabProxy Active
yourmailserver.com OwaProxy Active
yourmailserver.com PopProxy Active
yourmailserver.com PushNotificationsProxy Active
yourmailserver.com RpsProxy Active
yourmailserver.com RwsProxy Active
yourmailserver.com RpcProxy Active
yourmailserver.com UMCallRouter Active
yourmailserver.com XropProxy Active
yourmailserver.com HttpProxyAvailabilityGroup Active
yourmailserver.com ForwardSyncDaemon Active
yourmailserver.com ProvisioningRps Active
yourmailserver.com MapiProxy Active
yourmailserver.com EdgeTransport Active
yourmailserver.com HighAvailability Active
yourmailserver.com SharedCache Activ
Replace yourmailserver.com with your server host name.
Thanks -
We have 5 devices connected to the same apple ID. My kids want to text from their iPod but when they do, it shows up on their friends devices that it was sent from my email or cell phone #. Is there anyway to fix this?
See:
MacMost Now 653: Setting Up Multiple iOS Devices For Messages and FaceTime
You will also have to uncheck your phone number is Settings>Messages>Send and Receive. You can't delete the phone nunber since it associated with your yur accounbt whch has the phone. -
Currently I have two iPads connected to the same apple iPad. One is connected to game center(iPad air) one the other(iPad 2) is not connected to Game Center. How can I connect the iPad 2 Clash of Clan progress to game center when I already have another clash from iPad air connected?
You cannot transfer content between two accounts. The sooner you make the conversion, the better. Just pick the new one and start using it(buying music etc).
*A lot of people open new accounts when their email changes or they have a new email. You can just access your apple id account and change the primary email that you use to log in along with other details. -
My family shares one apple id. Is there any way to make an apple id for each member of my family and have it all connected to the same credit card and have the same previous downloads open to download by signing in to each members personal apple id?
Hi cindy,
If you all have individual Apple IDs, then you would be able to dowload music from a shared iTunes library on a computer, but you would not be able to sign on each individual ID on an iOS device in order to download music purchased under the original Apple ID without a 90-day waiting period between sign-ons.
Here's what I mean:
If you were to sign on a new Apple ID on, say, an iPhone, and then were to purchase and download some music from iTunes, then you would have to wait 90 days before you could sign on the old Apple ID to that iPhone in order to download previously purchased material (and vice versa).
However, if all of the music purchased by that origjnal Apple ID is in an iTunes library on a shared computer, then you can hook up the device and selectively sync any music in that library to the device. You can also sign on any of the Apple IDs to that shared iTunes library and purchase music to be added to the library.
You would need to authorize the computer for each of the new Apple IDs.
Each of the Apple IDs would also be able to download that music purchased either by syncing to the iTunes library on the computer or by downloading it OTA on the device.
So, each Apple ID can download music, movies, etc. purchased with that Apple ID OTA to the device. Also each Apple ID can sync any music, movies, etc. that are in the iTunes library on the computer regardless of who purchased them.
The only other thing you would need to remember is that if an App needed to be updated, then the original Apple ID that was used to purchase that App would come up, and the password that goes with that Apple ID would be required to do the update.
Hope that helps,
GB -
Unable to deploy BPEL Process -- Says If you have installed a patch to the
I have a simple BPEL process that calles an ESB flow deployed in the same server.
I am facing the following issue when trying to deploy the BPEL process.
The ESB flow is deployed and is working perfectly.
Configuration:
JDeveloper 10.1.3.5
SOA Suite 10g Release 3
Downloaded from:
http://www.oracle.com/technetwork/middleware/ias/downloads/index.html
Here I downloaded this file:
http://download.oracle.com/otn/nt/ias/101310/soa_windows_x86_101310_disk1.zip
When I compile the BPEL project, it compiles fine:
Compiling...
Compiling C:\JDeveloper\10gMywork\OrderProcessingApp\OrderDistributionProcess\bpel\OrderDistributionProcess.bpel
*[BPEL Compiler] Initializing compiler for first time use...*
BPEL suitcase generated in: C:\JDeveloper\10gMywork\OrderProcessingApp\OrderDistributionProcess\output\bpel_OrderDistributionProcess_v2011_09_01__39889.jar
copying bpel/OrderDistributionProcess.wsdl to output directory
copying bpel/OrderSystem_OrderSearchService_RSRef.wsdl to output directory
converting, through native2ascii, build.properties to output directory
*[11:05:04 AM] Successful compilation: 0 errors, 0 warnings.*
Now when I choose (Right Click on Project) -> Deploy -> BPEL Process Deployer,
I get this error:
Buildfile: C:\JDeveloper\10gMywork\OrderProcessingApp\OrderDistributionProcess\build.xml
[java] Java Result: 1
validateTask:
[echo]
| Validating workflow
[validateTask] Validation of workflow task definitions is completed without errors
deployProcess:
[echo]
| Deploying bpel process OrderDistributionProcess on localhost, port 8888
[deployProcess] Deploying process C:\JDeveloper\10gMywork\OrderProcessingApp\OrderDistributionProcess\output\bpel_OrderDistributionProcess_1.0.jar
BUILD FAILED
C:\JDeveloper\10gMywork\OrderProcessingApp\OrderDistributionProcess\build.xml:78: A problem occured while connecting to server "localhost" using port "8888": bpel_OrderDistributionProcess_1.0.jar failed to deploy. Exception message is: ORABPEL-05215
Error while loading process.
The process domain encountered the following errors while loading the process "OrderDistributionProcess" (revision "1.0"): null.
If you have installed a patch to the server, please check that the bpelcClasspath domain property includes the patch classes.at com.collaxa.cube.engine.deployment.CubeProcessHolder.bind(CubeProcessHolder.java:285)
at com.collaxa.cube.engine.deployment.DeploymentManager.deployProcess(DeploymentManager.java:804)
at com.collaxa.cube.engine.deployment.DeploymentManager.deploySuitcase(DeploymentManager.java:670)
at com.collaxa.cube.ejb.impl.BPELDomainManagerBean.deploySuitcase(BPELDomainManagerBean.java:445)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.JAASInterceptor$1.run(JAASInterceptor.java:31)
at com.evermind.server.ThreadState.runAs(ThreadState.java:620)
at com.evermind.server.ejb.interceptor.system.JAASInterceptor.invoke(JAASInterceptor.java:34)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.TxRequiredInterceptor.invoke(TxRequiredInterceptor.java:50)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
at DomainManagerBean_RemoteProxy_4bin6i8.deploySuitcase(Unknown Source)
at com.oracle.bpel.client.BPELDomainHandle.deploySuitcase(BPELDomainHandle.java:317)
at com.oracle.bpel.client.BPELDomainHandle.deployProcess(BPELDomainHandle.java:339)
at deployHttpClientProcess.jspService(_deployHttpClientProcess.java:376)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:453)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:591)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:515)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:396)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:410)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:866)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448)
at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:216)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:117)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:110)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:239)
at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:34)
at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:880)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
Total time: 6 seconds
I checked the host port, i.e., 8888 here, from JDeveloper; and it says that the tests passed.
Help me please.Balu,
it seems you are trying to deploy example for B2B. Please check your B2B is up, AQ are up and accessible and you can also check your SOA dehydration DB .
You can check some setup and dexample at: http://www.oracle.com/technology/products/integration/b2b/pdf/B2B_TU_001_B2B_BPEL.pdf
-JMehta -
I have updated my iPad, my wife's iPad, but both our iPhones (5S) and (5C), give the following error every time we try.
"Unable to verify update. iOs 8.0.1 failed verification because you are no longer connected to the internet."
We are obviously connected to the internet because the updated downloaded on all 4 devices, but the iPhones will not go the next step.
Wifi ok
Connection ok
Help ...
MarkApple has pulled the iOS 8.0.1 update due to problems.
iOS 8.0.2 will be released in "the next few days".
Loss of cellular service or ability to use Touch ID after updating to iOS 8.0.1 on iPhone 6 or iPhone 6 Plus
We have a workaround for you if you have an iPhone 6 or iPhone 6 Plus and you lost cellular service and Touch ID functionality today after updating to iOS 8.0.1. You can reinstall iOS 8 through iTunes by following the instructions below. We are also preparing iOS 8.0.2 with a fix for the issue, and will release it as soon as it's ready in the next few days. -
What is the process for connecting airport extreme ethernet? I have ethernet cables connected to stereo receiver for internet radio and another to blue ray player. The system preference network indicates "ethernet not connected" with red dot to left of this message. The airport wireless works and has green dot to left of it. The stereo receiver and blue ray player do not respond and give message not connect to internet. Thank you. / cfpirate
It worked for me finally. I took out the DNS numbers in airport admin utility, and restarted the airport express. I do not remember putting the DNS numbers in, I wonder from where the airport express got those numbers.
After restarting, it worked.
Thanks! -
hie there Actually um trying to update new iOS 7 for my iphone 4 but when i press the button to install new software suddenly it appears why " iOs 7 failed verification because you are no longer connected to the internet " even my phone is already connected to net
I tried powering down and re-starting the iPhone (as suggested at http://support.apple.com/kb/TS1275). This seems to have cleared the "...not connected to the Internet" problem, and iOS 6.1 is now in the process of downloading.
Thanks very much for your feedback. -
It downloads everything, but when I re-start, it can not connect to the download server.
I've left it open and it never connects.Your UserAgent indicates that you used Firefox 3.6.17 to post here. <br />
Mozilla/5.0 (Windows; U; Windows NT 6.1; en-GB; rv:1.9.2.17) Gecko/20110420 Firefox/3.6.17
What does it say about the version of Firefox you have in '''Help > About Firefox'''?
If it says Firefox 4.0 or 4.0.1, see if this helps you: <br />
https://support.mozilla.com/en-US/kb/Websites+or+add-ons+incorrectly+report+incompatible+browser -
I want to rent a mivue on my MacBook to watch while I am in an airplane. I will not have an internet connection. Can I watch the movie without an internet connection?
Please be aware of the movie rental's time limitation that you have 30 days from the time of rental to watch your movie, and once you start watching it, you have 24 hours to finish watching it. You may watch it as many times as you like during those 24 hours. It may be helpful to make sure the download completes successfully before you begin watching the movie.
Once the download is complete you can watch it without an Internet connection. However, an Internet connection to the iTunes Store is required to authorize playback or activate the 24 hours time-limit of movie rentals. This means, only during the starting of the movie. Once you have started playing the movie rental, internet connection is not required. You can play anywhere without internet connection.
You may need to validate the rental prior to watching so it starts the rental period timer and for that you will need an internet connection. You can probably do that by starting the rented movie while on the Airport Wifi or right before leaving home. You'll have 24 hours to watch the movie after you start it.
For more information on movie rentals, you can visit:
iTunes Store: Movie rental frequently asked questions (FAQ)
http://support.apple.com/kb/HT1657
Note: 24 hours time limit is for United States customer only, while 48 hours for other countries.
Maybe you are looking for
-
PS CS5 Extended on Windows When trying to use the clone stamp and/or healing brush as soon as I move the cursor from the toolbar over to the image I get an exact copy of the existing layer that moves around the window with the movement of the clone s
-
Hi All I have a form with two database field and one check box i want when i check the checkbox then the color become green if unchecked red where i wrote the trigger so execute the query and get the result SQL> desc alarm Name
-
Can I password protect reminders?
Is it possible to password protect reminders? Is there any way to protect these data?
-
Keys for the authentication with Card Manager.
Hi! I got a problem with authentication with CM (JCOP Tools) sending init-update command. I already have 2 cards blocked. I use KMC key. Is it wrong? Maybe sombody can tell me, which keys i must use? Thanks.
-
Help - installation error 2004s
Hi, I am installing SAP Netweaver2004s(ERP)SR2 on (db2-9.5) the database instance(db2) failed with this error. ERROR 2008-05-19 19:14:48 [iax6binstc.cpp:411] CDB6Instance::CreateInstance(const map<iastring,iastring>&) lib=i