Do you have to down load from the internet using apple's recover partition, every time you need to do a clean install? or can you make a copy of Mt Lion onto a USB stick and install off that?

Do you have to down load Mountain Lion from the internet every time you need to do a clean install? or can you make a copy of Mt Lion onto a USB stick and install off that?
Thanks

Yes you can make a USB stick of Lion or Mt Lion. Use Lion Disk Maker after you download OS X from the internet.
For Lion you have to point the download to an external drive and watch when it completes and reboots the system to start the install disconnect the external. If you bought Mt Lion from the Mac App Store then you can download it from there and just cancel the install when it comes up on the desktop.
If you are downloading from the Recovery HD or from the Online Internet Recovery system, slightly different then the built in Recovery HD, then again you need to point it to an external drive and discoonect that drive when the system reboots to start the real install.
Then use Lion disk maker to create either a DVD disc or USB thumb of the install files.

Similar Messages

  • Once you have downloaded ESX24 samples from the internet how to you get them on to logic to use them ?

    once you have downloaded ESX24 sample packs from the internet how do you get them on to logic so you can use them ?

    Mac App Store: Hiding and unhiding purchases
              http://support.apple.com/kb/HT4928

  • HT1391 I have down loaded a number of songs but after a short while they go messing. I tunes can not find them. If I down load from a cd there is no problems. I tunes can always find them. For that reason I no longer down load from the I tunes store. why

    iTunes can not find the music that was down loaded form the iTunes store. Why? Where is it locateded? They are there and play for a short while then they disappear. Why? What is happening to the songs that I have down loaded????? Anything that I import form a cd is still there!
    Why can't iTunes find what I down loaded from the iTune store???????
    If Heaven
    3:31
    Andy Griggs
    This I Gotta See
    Country
    17
    In front of the "if" there is a gray circle with and "!" in the center. When I click on the song to play I get this message.The song could not be used because the original file could not be found.

    iTunes can not find the music that was down loaded form the iTunes store. Why? Where is it locateded? They are there and play for a short while then they disappear. Why? What is happening to the songs that I have down loaded????? Anything that I import form a cd is still there!
    Why can't iTunes find what I down loaded from the iTune store???????
    If Heaven
    3:31
    Andy Griggs
    This I Gotta See
    Country
    17
    In front of the "if" there is a gray circle with and "!" in the center. When I click on the song to play I get this message.The song could not be used because the original file could not be found.

  • I just want to know what Apple computer to get to play Civilization V down loaded from the App store.

    I just want to know what Apple computer to get to play Civilization V down loaded from the App store.
    The game Civ5 processes a turn in single core mode. It says “please wait” while it processes a turn. If the intel i7 CPU is “fourth generation” it is twice as fast for civ5 turn processing. It does not matter if you have more memory or a better graphics chip. So, I can get a smaller cheeper Apple computer as long as it is fourth generation. I tested three new iMacs, two new MacPros and two mac minis.
    See:
    http://apolyton.net/showthread.php/193302-Civ-5-Processor-performance-analyzis-a t-Gamespot
    I have looked at that darned “please wait” message for years. Now it can be 60 seconds on a new MacPro6,1 or late 2012 Mac mini and 30 seconds on a new iMac. Even the 21.5 iMac 3.1 GHz has 3.9 GHz turbo boost for single core and it is supposed to be fourth generation.
    Some of that does not seem to true for the new 21.5 inch iMac I just tested (Fusion drive). Mac Mini 54 seconds 21.5 iMac 49 seconds.
      Cliff Nelson

    Legality aside (I'm not a lawyer and have no opinion on the matter) in order to make a purchase of an iPhone 5 you would need to travel to a country where they are for sale and purchase it there. Be sure to get one that is officially unlocked or you would not be able to use it with your cell carrier. Be sure that your carrier supports use of the iPhone before you buy. Also note that the warranty of the iPhone is only valid in the country of purchase.
    Appe does not ship outside of the countries where it sells the phones.

  • Can you have two detail lists from the basic list at the same time?

    Hi
    Can you have two detail lists from the basic list at the same time?
    If yes how and if no why?
    Thanks
    Venkat

    No   ... it is not   possible   of   2 detail  list at   one time   from the basic  list ...
    you can  increament   the SY-LSIND  .... But you can not   display  both the windows   at single time  ...
    it is  possible  to  display  2 Detail list  in ALV   ......  from one  basic  list   using  the  Blocked  list  concept    .
    Sample Program on BLOCK LISTS
    Report   zblock_list
    * Declarations for BLOCK ALV DISPLAY
    *--type pools
    TYPE-POOLS:slis.
    DATA:x_layout TYPE slis_layout_alv,
    t_field TYPE slis_t_fieldcat_alv,
    *--field catalog
    x_fldcat LIKE LINE OF t_field,
    *--to hold all the events
    t_events TYPE slis_t_event,
    x_events TYPE slis_alv_event,
    t_sort TYPE slis_t_sortinfo_alv,
    x_sort LIKE LINE OF t_sort ,
    *--Print Layout
    x_print_layout TYPE slis_print_alv.
    *----Macro to add field catalog.
    *field "text "length "tech "COL_POS "DATATYPE "DDIC_OUTPUTLEN
    DEFINE add_catalog.
    clear x_fldcat.
    x_fldcat-fieldname = &1.
    x_fldcat-seltext_m = &2.
    x_fldcat-outputlen = &3.
    x_fldcat-tech = &4.
    x_fldcat-col_pos = &5.
    x_fldcat-no_zero = 'X'.
    x_fldcat-ddictxt = 'M'.
    x_fldcat-datatype = &6.
    x_fldcat-ddic_outputlen = &7.
    if &6 = 'N'.
    x_fldcat-lzero = 'X'.
    endif.
    *--build field catalog
    append x_fldcat to t_field.
    END-OF-DEFINITION.
    *----- data declerations.
    data: v_repid like sy-repid.
    data: begin of itab occurs 0,
    matnr like mara-matnr,
    ernam like mara-ernam,
    meins like mara-meins,
    end of itab.
    data: begin of jtab occurs 0,
    matnr like makt-matnr,
    maktx like makt-maktx,
    end of jtab.
    select matnr ernam meins
    up to 20 rows
    from mara
    into table itab.
    select matnr maktx
    up to 20 rows
    from makt
    into table jtab.
    v_repid = sy-repid.
    *DISPLAY alv
    * Initialize Block
    call function 'REUSE_ALV_BLOCK_LIST_INIT'
    exporting
    i_callback_program = v_repid.
    *Block 1:
    *INITIALIZE
    refresh t_field. clear t_field.
    refresh t_events.
    *field "text "length "tech "COL_POS "DATATYPE "DDIC_OUTPUTLEN
    add_catalog:
    'MATNR' 'Material' '18' '' '1' 'C' '18',
    'ERNAM' 'Created By' '12' '' '2' 'C' '12',
    'MEINS' 'Unit' '5' '' '3' 'C' '3'.
    *--build table for events.
    x_events-form = 'TOP_OF_LIST1'.
    x_events-name = slis_ev_top_of_list.
    append x_events to t_events.
    call function 'REUSE_ALV_BLOCK_LIST_APPEND'
    exporting
    is_layout = x_layout
    it_fieldcat = t_field
    i_tabname = 'ITAB'
    it_events = t_events
    it_sort = t_sort
    tables
    t_outtab = itab
    exceptions
    program_error = 1
    maximum_of_appends_reached = 2
    others = 3.
    if sy-subrc <> 0.
    message id sy-msgid type sy-msgty number sy-msgno
    with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    endif.
    *--BLOCK 2(SUMMARY REPORT)
    *INITIALIZE
    refresh t_field. clear t_field.
    refresh t_events.
    *field "text "length "tech "COL_POS "DATATYPE "DDIC_OUTPUTLEN
    add_catalog:
    'MATNR' 'Material' '20' '' '1' 'C' '18',
    'MAKTX' 'Description' '40' '' '2' 'C' '40'.
    *--build table for events.
    x_events-form = 'TOP_OF_LIST2'.
    x_events-name = slis_ev_top_of_list.
    append x_events to t_events.
    * Append table block.
    call function 'REUSE_ALV_BLOCK_LIST_APPEND'
    exporting
    is_layout = x_layout
    it_fieldcat = t_field
    i_tabname = 'JTAB'
    it_events = t_events
    tables
    t_outtab = jtab
    exceptions
    program_error = 1
    maximum_of_appends_reached = 2
    others = 3.
    if sy-subrc <> 0.
    message id sy-msgid type sy-msgty number sy-msgno
    with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    endif.
    *--CALL FM TO DISPLAY THE BLOCK REPORT.
    call function 'REUSE_ALV_BLOCK_LIST_DISPLAY'
    * exporting
    * is_print = x_print_layout
    exceptions
    program_error = 1
    others = 2.
    if sy-subrc <> 0.
    message id sy-msgid type sy-msgty number sy-msgno
    with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    endif.
    form top_of_list1.
    skip 1.
    write: 10 'List 1',
    /5 '--------------------'.
    skip 1.
    format reset.
    endform.
    form top_of_list2.
    skip 1.
    write: 10 'List 2',
    /5 '--------------------'.
    skip 1.
    format reset.
    endform.
    reward  points if it is  usefull ....
    Girish

  • HT1473 i have downloaded some songs from the internet and saved it on my desktop. how do i transfer those songs to itunes?

    i have downloaded some songs from the internet and saved it on my desktop. but i do not know how to import the songs from that folder to itunes.

    Just drag the song(s) to iTunes, if they are one of these formats (wav, m4a, mp3, mp4, wma etc) and they will appear under Music library.
    If you have lots of music files, put them in a folder and go iTunes menu FILE, Add folder to library..... to add this folder at one go.

  • I reacenty just got a mac book pro and i want to downloads a software for the internet {noteworthy }and when I say open software it says WARNING THIS A PRODUT THAT YOU ARE ABOUT TO OPEN FROM THE INTERNET I'm not sure if that means that i will jail break

    i recenty got a mac and i want to dowloand note worthy frow the internet but when i want to open it it says WARINIG THIS A SOFTWARE THAT YOU ARE ABOUT TO OPEN FROM THE INTERNET me quetion is will this jail break my mac and if so how will this efect me

    ace9001000 wrote:
    so you mean i can get stuf like minecraft and note wothy with out it hurting my mac
    You've already been told that the message you got is a standard feature of Lion, so stop worrying about it.

  • Can you capture video from the internet, using premiere pro cc?

    trying to capture video from the internet, using premiere pro cc, is that possible?
    also - it keeps saying "video capture offline" - any solutions for that?

    I am going to go out on a limb and say that while it may be against the YouTube terms of service to download or scrape a video off of their service, there are times that I really don't care since it is for my personal use. Providing myself or my wife with entertainment that she can watch or listen to on her smartphone while on an airplane, or in a car traveling down the road, just doesn't bother my moral compass. Doesn't make it twitch in the least.
    Perhaps I am wrong. Perhaps I shouldn't do it. Tough. I do, and will continue to do so until the Google police come knocking on my door.
    This is pretty much the same argument that they tried to kill the VCR with. The simple act of time shifting was something that was considered wrong, and illegal, until people came to their senses.
    As for the editing capability, you might be surprised at the ways it is possible to download video that works just fine for what I use it for. Premiere Pro has no problems allowing me to edit out the parts I don't like, or just aren't funny, and the quality really doesn't suffer much at all.
    Now, with the exception of something I did for my two year old Great Niece, I have never used any video that I have downloaded for anything except a tutorial, or in her case, a Sesame Street song I used when I shot video of me reading her the Sesame Street book that I purchased.
    Would it be wrong to post downloaded video, intact or edited, for public consumption? Sure it would. No question about it.
    But please do not assume that everyone downloading video from the Internet is doing so for nefarious purposes, and I promise not to assume everyone is a perfect angel and is following all the rules.

  • When you try downloading a movie from the internet whick movie file can you download

    which file do you burn to burn a dvd

    when you try downloading a movie from the internet whick movie file can you download
    Depends on the web site. The site programmer can decide whether or on a file can be downloaded/can be saved to your computer. If he/she does not allow you to do this, then your can't download/save anything to your local computer.
    which file do you burn to burn a dvd
    Depends on the type of DVD you are making and how you plan to play the file. For instance, you can "author" the file so it can be played on a commercial DVD player connected directly to your TV or using a DVD media player on your computer. On the other hand, you could also burn the file to a DVD as a data file which can then be copied to a computer and played in a general video media player like QT. You could also burn the video as a data file to a DVD for playback directly from the DVD in a general media player like QT but then you would have to specifically encode the video for CD/DVD playback.
    Suggest you do a little research on the internet to discover the options available to you so you can better decide which work flow best meets your DVD burning requirements.

  • Do you have to be connected to the internet for the download to complete?

    do you have to be connected to the internet for the download to complete?

    Sure. Or where else do you think those files would be coming from?
    Mylenium

  • How to download a file from the internet using terminal

    how to download a file from the internet using terminal
    does any one know how to download afile from the internet using the Terminal application?

    Use curl. Something like this:
    curl -O http://www.example.com/filename.zip
    For more info, type +man curl+.

  • Is it possible (if so: how) to store an i-Photo file (with an average of 50 photos per file) onto a USB-stick, in a way that the file with the heading (e.i.'holidays' or 'work') remains in tact? If I click 'export' all photos are stored separately. Thanks

    I am trying to store I-Photo files onto a USB-stick, keeping the file (with an average of 50 photos) in tact. Is this possible and if so: how, please? I have tried clicking on 'export' and then click on the name of the USB-stick. But by doing this all photos seem to be stored separately, under their image number - and not under the file name. Which makes it near impossible to easily refind the photos on the USB-stick.
    Thanks for advice

    Dear Alex,
    If I understand correct your post you are confused with difference of loading procedure between real smartcard and SDK simulation. It is a fact that simulation uses its own loader application and smartcards usually use GlobalPlatform card manager application. To load CAP file to the GP compliant card it is necessary to use sequence of commands such as INSTALL(load),LOAD,INSTALL(install+make_selectable). I do not know any specific java API to perform this loading with any reader. But there are few software programs from various card producers. This software is usually distributes toghether with smartcards.
    Yours
    Dmitri

  • I need to load weather data from the internet using ODI

    Hi,
    I need to populate my weather table from the internet, however i am not sure where to start from.
    Anybody had done this before, any ideas, recommndation and suggestion
    TIA
    Shawn

    Hi Venkat,
    I have this url link that has historical temperatures ready and i want to populate my oracle table with the reading using odi. The like is http://www.wunderground.com/history/airport/OLBA/2011/5/1/MonthlyHistory.html?req_city=NA&req_state=NA&req_statename=NA&MR=1&format=1
    In ODI I tried the Physical Architecture XML and defined a new Data Store and selected JDBC driver com.sunopsis.jdbc.driver.xml.SnpsXmlDriver and in the JDBC URL
    jdbc:snps:xml?f=http://www.wunderground.com/history/airport/OLBA/2011/5/1/MonthlyHistory.html?
    I tried testing the connections I get a "Connection Failed" however, if i put the url in a browser it displays the content.
    I am going about correctly or is there a correct way to it?
    Thanks
    Hicham

  • How do I download videos from the internet using Adobe?

    I have already installed your Flasher in my computer. I want to use it to download videos from the internet. Please help me. I have two email addresses. Both you have. I hope you hear from you. My name is Gomez and my email address is [removed] Hope to hear from you.

    Gomez,
    I hope you are referring to Flash Player and you have installed it successfully. Ideally, you should be able to view Flash videos available in Internet.
    Do you have any issues in viewing videos?
    If so, please let us know your operating system (Windows XP, 7 or Mac) and the browser you use (Internet Explorer, Firefox, Safari).
    Also, let us know what you see in the following link: http://helpx.adobe.com/flash-player/kb/find-version-flash-player.html
    The following doc has useful information: http://helpx.adobe.com/flash-player/kb/flash-player-faq.html
    Thanks,
    Sunil

  • How do I download videos from the internet using Adobe Flashplayer?

    Dear Adobe Customer Support,  I want to download a video from the internet but I don't know how to do so. Please help me.

    Adobe Flash player enables you to view Videos but not download them to the local drive. You need to use other non-adobe softwares for that.
    If you are facing issues watching the videos due to flash player not installed then you have to tell me the OS and browser you are using.
    You can also refer to the following KB's :
    WIN : http://helpx.adobe.com/flash-player/kb/flash-player-games-video-or.html
    MAC : http://helpx.adobe.com/flash-player/kb/troubleshoot-games-video-audio-flash.html

Maybe you are looking for

  • T400 boots in low res, then changes to high res once windows boots

    when i boot windows vista it boots into a low resolution, and makes everything bigger. Once windows boots up the screen flickers and it changes to a higher resolution. how do I make it stay in the higher resolution? T400 Intel® Core™2 Duo T9400 2.53

  • Windows Explorer window opens on use of iPod

    Hello folks, my problem is this: Anytime I do anything with my brand new Shuffle (2nd Gen) in iTunes, a windows explorer window opens - Shuffle (E:) - and sits there waiting for me to do something with it. It contains no songs even though the shuffle

  • Training and event iviews in ess.

    Hi all, We are using 1). sap portal 7.0 sp 9 and 2). Using back end ECC 6.0 3). And using Ess business package Business Package for Employee Self-Service (mySAP ERP) release 1.0 The business package doesnot contain any training and events module ivie

  • 6120 classic wont start up

    Turned my phone off earlier tonight, went to turn it back on, it lights up, nokia symbol, then the screen goes black, then it switches off, this repeats itself a few times and then gives up. If it is plugged in to charge it just continues doing this.

  • I have Cloud on my Imac how do I get it on my IPad

    Recently I load the iCloud app on my Imac.  It seems to work well.  Now I wan to use it to move files to our new I pad.  I cannot seem to get there from here!  Can anyone help me out here?  Is there a better mechanism for doing that? Thanks !