Do you have to get a full windows disc to install on mac or can you download the full windows with a product key?

Well I've been trying to find a full installment of Windows 7 32/64 bit Ultimate/Home Edition/Professional but I can't find a disc. So basically I'm asking can I just download Windows 7 from the internet with the product key or do I HAVE TO get a disc and install it through Bootcamp?

I don't know if you can legally download a full Windows 7 installer, but if you can find one, you just need to copy the image to a flash drive. See:
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
and
https://discussions.apple.com/thread/4087200?start=0&tstart=0
Amazon has several different versions of Windows 7 available on disk, though. Have you tried them?
Regards.

Similar Messages

I have a licence for Master collection 6 windows and I switched to mac. Can I switch the serial some

I have a licence for Master collection 6 windows and I switched to mac. Can I switch the serial somehow so I would be able to use it in my mac?

AppleWorks is not legally available for download. You would need to buy a copy. HardcoreMac.com still lists AppleWorks 6 on their website. You could also try eBay but you would need to make sure it is AppleWorks 6.2 or newer to install on OS X.

HT4009 I purchased an upgrade inside the free app, however it shows I paid for the free app & now I can not download the full version. What should I do?

I purchased an upgrade inside the free app, however it shows I paid for the free app & now I can not download the full version. What should I do?
Thanks!
Kristine

Finish the download on your computer in iTunes and then sync the app to the iPad and then delete it. You will probably have to let it fully download before you can delete it.
You can try restarting the iPad and see if the download will resume - Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Yoy can try this as well and see if the download will resume. Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Look in iTunes and see if there is a pending download in there that might be causing the delay. If there is a download there, try to finish that one first.

How can I download the full source code for the Java 3D package

how can I download the full source code for javax.media.j3d
especially I need the Transform3D.java class.
thanks a lot
Meir

thank you guys I'll try to do so, I suggest you to
join me.From the one of the (ex-!)Java3D team:
"I'm glad to see that Sun has decided to officially support an
open source Java/OpenGL binding, JOGL. Perhaps they will
eventually decide to make Java 3D open source. However, be
careful what you wish for. The Java 3D source is huge and
complex. There are native sections for Solaris, Windows/OpenGL,
and Windows/Direct3D, plus common code. I don't know how you'd
open source a build process that requires different pieces of
the code be built on different machines running different
operating systems."
Sounds scary - I hope we're ready for it :)

I had a windows pc and switched to a Mac. Can I download the mac version without repurchasing?

I had a windows pc and switched to a Mac. Can I download the mac version without repurchasing?

Mynameiskathie you can download the Macintosh version of Photoshop Elements 10 at Download Photoshop Elements products | 11, 10.

Can't download the full version of garage band...

I've just got a new macbook pro, with garage band 11, and it won't download the full version with all the instruments. I click on a instrument not on the computer, and it prompts me to download the instruments. so i try whatever and it opens the app store and tells me there are no updates available. any ideas?

Same here,a few days macbook air from the apple store and with ML and iLife'11 preinstalled.iLife'11 show in the MAS BUT AFTER OPEN gB and check for software update and before now the MAS say no software update available ..

FFox is brilliant - thank you! I rarely have any prob. - as I did w/ earlier IE. Do you have a component to help w/ graphic design (gd)? If not, can you recomm. gd software (that interfaces well with FFox) - pref. for me to try out, use a tutorial?

Pls excuse if this ques. is not approp. for Support. ~ S.

You are on Windows 2000, you do not have a "Firefox" button, and should consider yourself to be fortunate in that you still have menus and don't have to do anything to get the menus back instead of the "Firefox" button. (The same applies to Windows XP users).
Use the "File" menu to get to Import. You are not on Windows 7 or Vista, and don't have to put up with the nonsense added for Aero.
If you want the "Firefox" button you can get it with View -> toolbars -> (uncheck) Menu Bar. The menu bar and the "Firefox" button were supposed to be mutually exclusive (which is impossible in some cases without being incompatible).
Once you are using the "Firefox" button ...
Use the "Alt" key to view the menu bar (temporarily) containing File, Edit, View, History, Bookmarks, Tools, and Help. On Windows 7 and Vista, the menu bar was hidden by default in Firefox 4 and above. These menu items are more or less available under the "Firefox" button which has the most used of the built-in Firefox menu items available in a different format.
To get back to having menus again. "Firefox" button -> Options (second column) -> (check) Menu Bar
You can make '''Firefox 7.0.1''' look like Firefox 3.6.*, see numbered '''items 1-10''' in the following topic [http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface Fix Firefox 4.0 toolbar user interface, problems (Make Firefox 4.0 thru 8.0, look like 3.6)]. ''Whether or not you make changes, you should be aware of what has changed and what you have to do to use changed or missing features.''
* http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface

A few weeks ago, I began to have problems getting links and buttons to work on varying websites. I've tried the help steps with no success. What gives?

When I go to certain web sites, I cannot get some of their links or buttons to work. For example, I cannot "vote" and see results on MSN's homepage or sign in to my account on Ancestry.com's homepage. Some links work, but others do not. They do not work in IE either. I have tried all of the suggestions concerning plug-ins and extensions that Mozilla Support gives. I run Windows 8.1, have Java up to date as well as JavaScript. I have tried everything to figure out what is going on. Any help would be much appreciated!

Ronmissy2008, this is Davec. I'm sorry to hear about you not being able to access certain links nor use the buttons to vote on issues or articles read.'''''' First of all, I would call your Internet Service Provider and have them check your router''''''. There is a possibility that it may need a firmware update, since you have upgraded to Windows 8.1. '''''Firmware''' is embedded software that implements network and security protocols for that specific model of hardware device.'' Most wired and wireless routers are designed to perform a firmware upgrade process. The manufacturer will be able to provide enhancements to your router. When I first got AT&T U-verse, my router upgraded its firmware which took about a few minutes to perform. Click on the link for more information about firmware upgrades:
(http://compnetworking.about.com/od/wifihomenetworking/qt/firmwareupgrade.htm)
If your Service provider is done with the router's firmware upgrade, then try updating your Windows 8.1 software.
1.) '''Open Windows Update by swiping in from the right edge of the screen '''(or, if you're using a mouse, pointing to the lower-right corner of the screen and moving the mouse pointer up), '''tapping or clicking Settings''',''' tapping or clicking Change PC settings, and then tapping or clicking Update and recovery'''.
2.) Tap or click Choose how updates get installed.
3.) Under Important updates, choose the option that you want.
4.) Under Recommended updates, select the Give me recommended updates the same way I receive important updates check box, and then click Apply.
(http://windows.microsoft.com/en-us/windows-8/windows-update-faq)
This is all I could think of for right now. Definitely call your Internet Service Provider and let them know you have upgraded to Windows 8.1 and that your router needs to be checked. Also, have them upgrade the firmware if needed. Then run Windows update. I'm going to perform more research into this matter. Let me know what results you receive after performing the firmware upgrade and the windows update.

With Adobe Dynamic Link do you have to buy a suite to be able to use it or can you buy just After Effects and Premiere?

The company I work for has me on Sony Vegas and After Effects right now. I am working on getting over to Premiere. On my personal computer I bought the suite and I have Adobe Dynamic Link and love it. My questions is since they purchased After Effects already would Adobe Dynamic Link work if they just bought Premiere.

> CS6 will only be available for purchase until May 30th and then Creative Cloud takes over completely.
That is not correct. We are still selling CS6 software for quite some time. Where did you see an indication otherwise?
Regarding Dynamic Link: In the current versions of the applications, no suite is required. For example, if you have the single-application subscriptions for both Premiere Pro CC and After Effects CC, Dynamic Link works between them. Dynamic Link is still limited to working between applications that share the same major version (i.e., CS6 with CS6, CC with CC, and so on).

Where can I download the full prior release of the...

I have the web installer for the prior release, but unfortunately it downloads the latest version instead of the version it was for. Everytime I try to sync my calendar under the new version Ovi crashes. The options lists the Windows Calendar under Calendar and tasks; however under sync it requires states the new version requires Outlook. I run Windows Vista and use the built in Windows Calendar/Contacts and use Open Office and web based email and have no desire to use Microsoft Office or Outlook. The prior release of Ovi Suite could integrate with Vista's Calendar and Contacts seemlessly.
Here's my Ovi details:
Nokia Ovi Suite 2.0.2.42
Nokia Photos 1.6.434.0
PC Connectivity Solution 9.45.0.0
Connectivity Cable Driver 7.1.23.0
Nokia Ovi Suite Software Updater 2009.40.0.60128
Maps Service API 3.0.38.0
Nokia mPlatform 2.6.40
Ovi Desktop Sync Engine 1.1.0.77
Operating system:
Microsoft Windows Vista 32-bit Edition, Service Pack 2
Language: English
Detected internet browsers:
- Microsoft Internet Explorer 8.0.6001.18865 (Default browser)
- Mozilla Firefox 3.5.7
Detected Bluetooth stacks:
- Microsoft (Version: 6.0.6000, Build: 16386)
I was planning on upgrading from the N80 Internet Edition to the N900 later this year, but that will absolutely be out of the question with Ovi Suite functioning the way it currently is.
Any help getting my hands on the earlier release would be greatly appreciated.
Thanks,

I am not sure whether this will solve your problem but you can try this
1. Uninstall NOS Suite, PC Connectivity solution and Nokia Connectivity cable drivers from Add/remove
2. Update your OS using windows update
3. Restart your System
4. Install latest Nokia Ovi Suite http://europe.nokia.com/support/download-software/nokia-ovi-suite
5. Restart your system again and try.
If this does not help could you please provide more information so that someone can help you to solve your problem?
1. OS details
2. NOS version and Language
Please THANK me by clicking on the ****WHITE STAR** ( Giving KUDOS) the big GREEN BOX to your LEFT .
It will help me to serve you better !!!!!
Thanking You

My license is for PC I now have a Mac, how can I download the software onto my new Mac?

I purchased the Adobe Creative Suite 5.5 for windows. I was given a disc to download it onto my computer. Recenlty my computer died so I purchased a new Mac. How can I download my Adobe Suite license onto my new Mac?

To get a Windows versions of CS5.5 onto a Mac you would have to try using a Windows emulator such as Bootcamp. CS5.5 does not qualify for a platform swap, so you will not be able to acquire a Mac version of it unless you find someone selling it.

My Apple TV says I have updated software, however it's only 6.2.1. How can I download the 7.1?

My Apple TV downloads automatically and when I just checked About, it says I have the 6.2.1 version and I see there is a 7.1 version. When I click on Update Software, it says I am updated. What next to get the 7.1 version? I'm using Yosemite on a new MacBook Air.

What version of iOS you can install depends on what version of the hardware you have: About Apple TV (2nd and 3rd generation) software updates - Apple Support

Where can I download the full disk image to re-install OS 10.5.8?

Hi there!
I brought mi MAC Book in 2008, and now mi OS is working bad. I need to format and re-install te OS. I have the backups in Time Machine in a external HD, but mi DVD room is not working to read a disk from boot, and any DVD actually... (what a surprise!).
How can I download version 1.5.8 full to boot from an external HD? or simple OSX 1.5 and then I can upgrade.
I have all the linceses to verify I 'm the costumer.
Thanks!
IV

If you're going to boot the Mac with the working optical drive in FireWire Target Disk mode, it doesn't matter when it was made, as you're not actually booting it from the DVD.
If you're going to boot the Mac you want to install the OS onto in FireWire Target Disk mode, the disk must be a retail one(unless both Macs are the same model) and it must be newer than both Macs.
(75203)

Where can I download the FULL driver for my XtremeMusic? (eg. more than just the audio consol

I just bought an OEM XtremeMusic and I downloaded the latest (from 2006) driver from the Creative Lab's website but all it installed was an audio console and the driver itself. I can change most of the settings I need inside the audio console, but isn't there an equalizer I can adjust and more settings? The screenshots of the XtremeMusic software from the website is definitely not the same as the audio console I have. Also, isn't there a CMSS-3D test somewhere? I can't find any of this. Did I miss something on the website that I could download?

Here you go:
http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=25677

Can I download the full upgrade to 3.5 with no ver 2 software installed?

I just requested the licence number before my express 2 ships out. Can I install ungrade to 3.5 with only the licence of version 2 and not the actual software installed?
I'm new to mac so bare with me!
Trevor

Don't bother to install FCE 2.
The FCE 3.5 Upgrade is really the FULL Retail version with one tiny difference - it will ask you for the serial number of your FCE 2.
Also it comes on 3 full DVDs not a CD.
Ian.

Do you have to get a full windows disc to install on mac or can you download the full windows with a product key?

Similar Messages

Maybe you are looking for