Do you have to have SoundBooth to transcribe?
I have the CS3 Design suite, so I purchased Premiere Pro CS4 as a standalone separately to edit AVCHD video recorded on a Canon HF20. When I click the metadata tab to transcribe the audio, the "Transcribe" button is grayed out. Is the transcribe feature only available in conjunction with SoundBooth, or perhaps this feature isn't available for AVCHD?
Any help is appreciated.
Excellent - thanks for the help! I would definitely skip the transcription, but I have a video clip that's 22 minutes long and my writer wants to trim it to a minute, but doesn't want to listen to the whole thing. Seems like a lot of work, but I'd rather do that than type the whole thing out for them.
Thanks again.
Similar Messages
-
Itunes wont open and when re-installed received this msg: Service Apple mob device failed to start. You have insufficent privileges to start system svc. Help?
Download Itunes from Apple.com, not from within Itunes.
Redo the install, following the below procedure. However, when you re-install Itunes, right click and run the install as administrator. For Win 7, you have to hold down the cntrl and shift keys when you right click and then "run as administrator" will be an option.
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (Vista, Win 7 & later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes -
HT204053 can you have multiple apple id's for the family but we all use the same iCloud?
Can you have multiple apple id's for the family members but we all us the same iCloud account?
You'll have to have an ID you all share in order to have a shared iCloud account. It would be sensible for each person to have their own ID and their own iCloud account for email and their own data (each would be on their own computer/iOS device or user account on a Mac) and then have a common account which everyone would sign into in System Preferences>Mail, Contacts and Calendars to access shared data.
You don't want to be all using the email in a common account - if people are using email aliases remember these can't be detached from the account and transferred to another one. Having all your emails mixed up together can be somewhat impracticable. -
Can you have two Apple IDs on one IPAD? One for school and one for home?
Can you have two Apple IDs on one IPAD? One for school and one for home?
If so do you know how to do it?It depends on what you want to do.
You could, for example, have one AppleID for iCloud backup [and therefore message syncing, notes syncing, etc] and a second one for iTunes [music, iBooks, etc].
But if you are looking for a way to flip everything between different appleIDs, then no. -
Can you have two apple ids on one mac?
Can you have two apple ids on one mac? We each have iPhones and want to utilize iCloud. Is this possible?
No, in this case the 2 user accounts with its own Apple IDs would be completely seperated.
If you want to share this things like music and app purchases you will have to to something else.
1. Create two user accounts on your Mac (user A and user B).
2. Create two iCloud accounts just for Mail, Contacts, Calendars, Photos, etc. (one for user A and one for user B):
On your Mac (with Mac OS X Lion or Mountan Lion):
Settings > Mail, Contacts, Calendars > iCloud > Create an Apple ID (button in left corner)
On your iPhone, iPad or iPod touch (iOS 5 or later):
Settings > Mail, Contacts, Calendars > Add Account > iCloud > Get a free @me.com address and create a new Apple ID
3. It is not recommended because you shouldn't share your Apple ID account information with other people but you could set up your old Apple ID as an account just for store purchases (Apps, Music, ...) so that everyone of you can manage the purchases in their own library (Access is limited to 10 devices). Therefore you have to setup this "old" ID in Settings of your iOS devices (Settings > iTunes & App Store) and in iTunes on your Mac. -
Apple published a report - http://support.apple.com/kb/ht3669#HP - that states system 10.6.8 supports the HP LaserJet 4MV. If this is accurate information, I would like to know where the drivers are located. I have spent more than three hours with your technical support and no one has a clue how to make this combination work. Please help ASAP. Thanks!
Welcome to Apple Support Communities.
We are all users here. There is no one from Apple responding on these user forums.
You did not mention which interface you are trying to use, or what steps Apple support had you try already, so I'll start with basics.
Your mid-2009 MacBook Pro would have shipped with OS X 10.5 'Leopard', and OS X 10.5 and prior versions supported the AppleTalk network connection and protocols, as well as others.
OS X 10.6, 'Snow Leopard' dropped support for AppleTalk.
So, Snow Leopard 10.6.8 likely does contain the correct DRIVER for your printer, BUT if your printer was originally connected via AppleTalk, AppleTalk will not work with Snow Leopard. Period.
There is at least one recently-published workaround to connect your printer via Ethernet, provided that you have the OPTIONAL HP Ethernet MIO interface card installed in your HP LaserJet 4MV printer.
If your printer DOES have the optional Ethernet interface, you can reconfigure your printer to use Ethernet instead of Appletalk. No, it's not 'plug and play' like AppleTalk was, but patiently following detailed step-by-step instructions it can be made to work.
The HP forums contains brief instructions on how to configure MIO Ethernet, and once configured, how to select the 4MV driver within this thread:
http://h30434.www3.hp.com/t5/Mac-Printing-and-Scanning/Laserjet-4mv/td-p/1176843
This Macrumors forum thread contains a post by TrumpSAJ with more detailed configuration instructions:
http://forums.macrumors.com/showthread.php?p=8748935#post8748935
Other World Computing has an older guide linked here:
http://blog.macsales.com/1897-appletalk-not-available-in-snow-leopard
And a thread on Gigaom discussing some other alternatives to Ethernet (for a variety of printers):
http://gigaom.com/apple/how-to-resurrect-your-appletalk-printer-in-snow-leopard/
In my opinion, if you don't already have an HP Ethernet MIO card installed in your circa 1995 printer, then it's time to buy a new printer. Spending more money to 'upgrade' something that old doesn't seem like a good investment. -
I would like to know if you have to back up a macbook hard drive, can I use a external hard drive that has been previously used to back up several pc 's, or is it best to have a separate external drive for the Mac?
In the Mac side of things, backups usually come in two flavors: clones or incrementals.
A bootable clone is a bit-for-bit copy of all essential files in the startup volume. If using the Lions, clones can be made using CarbonCopyCloner or just plain old Disk Utility. These backups represent the safest protection of your info, but take the longest to do. Recovery is an inverse process: you copy the clone back into the internal drive.
Incremental backups start with a complete backup of the startup volume and only copy whatever changed from the previous run. OS X includes the fully integrated Time Machine backup utility to do this. It is extremely easy to do and takes the least amount of time. Recovery is another matter altogether since you have to start with a freshly installed instance of the OS and have to apply all intervening backups to bring the result to the latest saved version.
As for where the backup takes place, the recommended media is an external dedicated drive or drives connected via the fastest interface available on your Mac: Thunderbolt, USB3, Firewire, or USB2. Network-based backups, wired or wireless, are attractive but may not offer the same performance and hence take longer. Also important to note that the entire drive need not be completely dedicated to a single backup. The Mac's EFI firmware infrastructure allows for an unlimited number of partitions on a hard drive and each can be used for either type of backups.
Holler if you need specifics on how to do each. This was just an executive summary. -
Not sure what to do. I've tried a system restore on my computer after the update in hopes of undoing the problem, that didn't work. I've tried to install, the new version of itunes for over two days now and I get to the point where it says "starting services" and it almost get's done and then it gives me that message " Service apple mobile device (apple mobile device) failed to start. Verify that you have sufficient privledges to start system services." Then it gives me three options to click on "abort", "retry" or "ignore". I've tried to retry over and over and it does no good, I just get the same message. I've tried ignore and the one time it did finish installing itunes, it didn't work, I got error messages telling me that it failed to download properly and I needed to delete the program and download it again. I thought maybe it had something to do with my ipod not being pluged into the computer so I pluged that it and it's still giving me the same message. I just don't know what to do. I'm very frustrated and I would really appreciate it if someone could help me. I'm completely out of ideas.
See Troubleshooting issues with iTunes for Windows updates.
tt2 -
How do you get your contacts back once you have restored your phone?
It was stated that I needed to update my phone, so I hooked into Itunes like it stated. I did and a message popped up stating that it was in recovery mode and I had to restore it first so I did. Now that it has updated and been restored, I don't have anything left on there such as my contacts, music, etc. the main thing I need are my contacts. Is there any way I can get them back without having to put each one in there manually?
Backing it up is what you are suppose to do regularly, But, trying to save them via backup means you have to restore your phone in itunes and that is probably not the way to do this. You can search on google for an app that may exist to save these ( if there is one, that would be the best way ) or you can take screen shots of your text and email them or just keep them on your camera roll. Im pretty sure if you google, you will find something to help you save them, most likely the deleted ones are gone tho.
-
how can i stop an error message that comes up when i am using word? the error message is "word is unable to save the Autorecover file in the location specified. Make sure that you have specified a valid location for Autoreover files in Preferences,…"
It sounds like if you open Preferences in Word there will be a place where you can specify where to store autorecover files. Right now it sounds like it's pointing to somewhere that doesn't exist.
-
What follows is a grouping of some of the most fruitful procedures - from what I've seen in the biggest battery life issue thread - and some background information and discussion for solving or improving the battery life with the iPhone 4S and may be applicable also to devices on which iOS 5.0/5.0.1 has been applied. Credit goes to the respective users who contributed this information to the forum and they should be commended for doing so. This is not a final listing. The goal here is to provide a first stop sort of knowledge base document for newcomers instead of having them perusing the never ending threads where the wheel is reinvented on every page...
Please don't post your questions, usage screenshots, or claims that it worked or not for you or anything here except PROCEDURES/DEBUG STEPS/SOLUTIONS or improvements to the procedures already listed here. Try to use point form and to be as concise and clear as possible. Hope all this helps.
Thank you and good luck!
General info and specs
First, take a look Apple's battery tips, info and specs(obligatory reading for all Iphone 4S users - read it once and for all):
http://www.apple.com/batteries/iphone.html
http://www.apple.com/batteries/
... you didn't read it? loll Always remember this i.e. the definition of "usage":
Usage: Amount of time iPhone has been awake and in use since the last full charge. The phone is awake when you’re on a call, using email, listening to music, browsing the web, or sending and receiving text messages, or during certain background tasks such as auto-checking email.
I'm still not convinced you read the links so here's what Apple has to say in terms of fine tuning your battery life:
Optimize your settings
Depending on how they are configured, a few features may decrease your iPhone battery life. For example, the frequency with which you retrieve email and the number of email accounts you auto-check can both affect battery life. The tips below apply to an iPhone running iOS 5.0 or later and may help extend your battery life.
Minimize use of location services: Applications that actively use location services such as Maps may reduce battery life. To disable location services, go to Settings > General > Location Services or use location services only when needed.
Turn off push notifications: Some applications from the App Store use the Apple Push Notification service to alert you of new data. Applications that extensively rely on push notifications (such as instant messaging applications) may impact battery life. To disable push notifications, go to Settings > Notifications and set Notifications to Off. Note that this does not prevent new data from being received when the application is opened. Also, the Notifications setting will not be visible if you do not have any applications installed that support push notifications.
Fetch new data less frequently: Applications such as Mail can be set to fetch data wirelessly at specific intervals. The more frequently email or other data is fetched, the quicker your battery may drain. To fetch new data manually, from the Home screen choose Settings > Mail, Contacts, Calendars > Fetch New Data and tap Manually. To increase the fetch interval, go to Settings > Mail, Contacts, Calendars > Fetch New Data and tap Hourly. Note that this is a global setting and applies to all applications that do not support push services.
Turn off push mail: If you have a push mail account such as Yahoo! or Microsoft Exchange, turn off push when you don’t need it. Go to Settings > Mail, Contacts, Calendars > Fetch New Data and set Push to Off. Messages sent to your push email accounts will now be received on your phone based on the global Fetch setting rather than as they arrive.
Auto-check fewer email accounts: You can save power by checking fewer email accounts. This can be accomplished by turning off an email account or by deleting it. To turn off an account, go to Settings > Mail, Contacts, Calendars, choose an email account, and set Account to Off. To remove an account, go to Settings > Mail, Contacts, Calendars, choose an email account, and tap Delete Account.
Turn off Wi-Fi: If you rarely use Wi-Fi, you can turn it off to save power. Go to Settings > Wi-Fi and set Wi-Fi to Off. Note that if you frequently use your iPhone to browse the web, battery life may be improved by using Wi-Fi instead of cellular data networks.
Turn off Bluetooth: If you rarely use a Bluetooth headset or car kit, you can turn off Bluetooth to save power. Go to Settings > General > Bluetooth and set Bluetooth to Off.
Use Airplane Mode in low- or no-coverage areas: Because your iPhone always tries to maintain a connection with the cellular network, it may use more power in low- or no-coverage areas. Turning on Airplane Mode can increase battery life in these situations; however, you will be unable to make or receive calls. To turn on Airplane Mode, go to Settings and set Airplane Mode to On.
Adjust brightness: Dimming the screen is another way to extend battery life. Go to Settings > Brightness and drag the slider to the left to lower the default screen brightness. In addition, turning on Auto-Brightness allows the screen to adjust its brightness based on current lighting conditions. Go to Settings > Brightness and set Auto-Brightness to On.
Turn off EQ: Applying an equalizer setting to song playback on your iPhone can decrease battery life. To turn EQ off, go to Settings > iPod > EQ and tap Off. Note that if you’ve added EQ to songs directly in iTunes, you’ll need to set EQ on iPhone to Flat in order to have the same effect as Off because iPhone keeps your iTunes settings intact. Go to Settings > iPod > EQ and tap Flat.
Usage specs for the 4S - http://www.apple.com/iphone/specs.html:
Talk time: Up to 8 hours (12.5% per hour drain) on 3G, up to 14 hours (7.1% per hour drain) on 2G (GSM)
Standby time: Up to 200 hours (0.5% per hour drain)
Internet use: Up to 6 hours on 3G (16.6% per hour drain), up to 9 hours (11.1% per hour drain) on Wi-Fi
Video playback: Up to 10 hours (10% per hour drain)
Audio playback: Up to 40 hours (2.5% per hour drain)
So a scenario of normal usage could be for example: 4 heavy hours of 3G internet browsing (66.4%), with one hour of call on 3G (12.5%) and 22 hours of standby (11%) = 100%
A battery life issue is a problem where the drain is really out of spec either during usage or standby or both. For example, multi-% per minute drain during usage or a 10% drain per hour during standby is problematic. Browsing the internet on 3G during one hour and losing 16-17% is not.
Apple's test methodology for claiming the specs:
http://www.apple.com/iphone/battery.html
Procedures
davidch tips (reset+full discharge recharge):
Go through these steps to address the battery after updating to iOS 5.0.1:
1. Reset all settings (settings app-> general-> reset)
2. Go through initial setup steps (lang, wifi, siri, enable location, etc) and choose setup as new phone (don't worry your apps, data, contacts, mail will still be there). Do NOT restore from iCloud or iTunes (It can copy back corrupt settings)
3. Turn off system location services timezone and iAd
4. Fully discharge battery (tilll it shuts off with the spinning wheel)
5. Fully recharge battery (overnight if possible)
In my experience this improves the Standby battery drain issue significantly in most cases. It reduces drain from 2-4% or more per hr to 0.5% or less. It has worked for many, many users now. If it does not work after a few try's you may have a real battery or hardware issue and should contact Apple. Good Luck!
ram130's variant of davidch i.e. additional steps:
Now using davidch original steps and attaching the tweaks I made to get me more usage. As shown on page 29.
Go through these steps to address the battery after updating to iOS 5.0.1:
1. Reset all settings (settings app-> general-> reset)
2. Go through initial setup steps (lang, wifi, siri, enable location, etc) and choose setup as new phone (don't worry your apps, data, contacts, mail will still be there). Do NOT restore from iCloud or iTunes (It can copy back corrupt settings)
3. Turn off system location services timezone and iAd
4. Fully discharge battery (till it shuts off with the spinning wheel)
5. Fully recharge battery (overnight if possible)
6. Disable Siri 'Raise To Speak' and REBOOT *( if possible use another camera to verify the infrared is off after the reboot).
7. Set emails, icloud and calendars to fetch. ** test. Mines on hourly.
8. If your in a no signal and your phone is saying "Searching..." even after 10mins, reboot while in that area and after 1-2min it should say "No Service". This mainly applies to Verizon customers and improve battery life in these areas.
9. *optional* Goto Settings > General > Network and you will see "Hotspot.." loading something, wait a few seconds and it should say "setup personal hotspot" then exit out.
* I notice a great improvement after disabling this and rebooting. This increased my "screen on" usage or at least helped it. Make the change.
** I have not tested push yet to narrow down the drain but I had this change on my phone. I believe exchange push is responsible for some stand by drain. As for icloud, haven't notice much of a difference. Just try it for a day. My email still came in fast most times. Again still testing, will report back on these..
buxbuster tips(wifi sync, iCloud):
These are my own tested workarounds that worked for my iPhone 4S and seemed to have worked for others as well :
Workaround number 1. Deselect wifi-sync in iTunes and press sync.
If that doesn't work try :
Workaround number 2 : Remove iCloud, reset network settings. ( I guess this won't work for you since you don't have it enabled ).
If both workarounds fail, you can always try to completely wipe your phone. That also solved some of the cases out there.
rolandomerida tips - i.e. buxbuster and additional steps:
Finally, I solved the syncing error loop. My contacts are syncing flawessly again between my devices and iCloud, and yes, the battery stopped draining, which is the main topic here.
I followed instructions from buxbuster (check his workaround a few pages up!) and an additional BIG step to restore contacts and syncing, as seen in a MacRumors forum.
This is what I did:
1. Make a backup of your Address Book, using the vCard option (or both, it doesn't hurt). Save it for later.
2. In your iPhone, delete iCloud account. When it asks, accept both: delete AND delete from my iPhone.
3. Reset network settings. The iPhone will restart, then will ask you to unlock the SIM card.
4.Turn Wi-Fi on.
5. Add the iCloud account again.
That's for Buxbuster's workaround. For some, it might work just like that. My iPhone repopulated from iCloud after step 5, but I still had that "server error" on iCloud. I had to do some extra steps, since my Mac was not syncing to iCloud and couldn't edit anything on my Mac or iCloud. Syncing back had to be fixed, too. If not, the syncing loop would continue from my iPhone, and the battery would drain awfully again.
1. In System Preferences -> iCloud, I turned Contacts off. I chose "keep on My Mac" those contacts, but I got an empty Address Book after a while. And a few minutes later, iCloud contacts were empty and my iPhone also. It is scary at first! Now, before importing that vCard backup...
2. Turn Wi-Fi off. This is important, since your contact-empty iCloud will attempt to wipe your Address Book from your Mac in seconds after importing.
3. Import your vCard backup to Address Book. Just drag it to your blank Address Book window; it asks if you want to import "x" number of cards. Of course, say yes.
4. Turn Wi-Fi on, and then iCloud contacts on again (System Preferences -> iCloud). It will offer to merge your newly populated Address Book with iCloud (which is empty at this point). It should upload every single contact to iCloud, and then to your iDevices. If not, a fifth step would be to import the vCard file to iCloud, but it shouldn't be necessary.
So, with iCloud syncing working correctly, there is no battery draining! Again, that was my particular issue.
I can't tell if this is the single answer to the widely spread battery draining problem, but it sure can be fixed with these workarounds, and yes, Apple should address the problem with a future update, for we affected customers don't need workarounds in the first place
This is the MacRumors discussion:
http://forums.macrumors.com/showthread.php?t=1256807
And dont' forget to check buxbuster's fix, video, and THANK him!
Miless tips (full 800mb release of 5.0.1 and sanitizing a restore):
As for 4S battery life. Try doing this,
1. Settings>Location Service ... disable all location services you do not need. In particularly Facebook because it drains the battery a lot.
Scroll down to the bottom at Settings>Location services>System Services ... Disable Setting Time zone, location based iAds, Diagnostic & Usage.
2. Settings>Notification>Calendar ... turn off the Notification Centre.
3. Settings>General>Reset ... do Reset All Settings. Doing this will not wipe out your iPhone. It will just Reset the network settings, location warning, keyboard dictionary, etc... but it will clear up some corrupted data there. Generally this will help.
Try these 3 steps first... if it still drains a lot, try the following,
4. Drain your battery down to 1%. Then charge it up using USB from PC ... not the charger. The charger output 1.0 A ( x 5V from USB ... you get 5W power). From PC, output is only 0.5A x 5V = 2.5W power. Charging is slower but trickle charge 4S helps the battery retain its charge better. I think it takes about 3-3.5 hours to charge full from USB/PC compared to slightly below 2 hours using iPhone charger.
If after doing the above still could not solve your battery issues (mine with iOS 5.0 was ok up to step 4, but not iOS 5.0.1).... plug you iPhone to a charger (any charger), from iPhone, access your iCloud ... set it up if you havent. Back up your iPhone data to iCloud. if you do not have enough storage (only 5GB is free), go to details and select the apps you need its data backup, choose only those you really need and leave those unnecessary ones out. Back up your camera roll to your PC/Mac manually as it could be too big to backup to iCloud.... once you have it setup, make sure you are on Wifi ... tap backup to iCloud from your iPhone. It will take a while if the file is huge.
Once backup to iCloud is completed, plug your iPhone to PC/Mac and launch iTunes 10.5.1 (make sure you have 10.5.1)
Click Restore. It will automatically initiate a download of iOS 5.0.1 ipsw for iPhone 4S. Wait for the whole process to finish, ie. download, restore software/firmware.
Once its done, do not set up your iPhone from iTunes. Set it up on your iPhone. Go through the selection. When prompted, select restore from iCloud (from your iphone backup earlier). Keep your iphone plugged into iTunes while restoring backup from iCloud. Because while restoring from iClouds, some data will be synced from iTunes if you plug in, e.g. music, video, etc... unless you bought these content from iTunes store. Apps will be downloaded from App Store from the cloud.
Once it's all done restored. Turn off your iPhone,.. and turn it on again.
Now, hopefully your battery wont be draining so fast anymore. Usually it wont after this. But you need to charge your battery at least 4-5 cycles to stabilize the charge on the battery. I dont know why... but battery life seems to get better and better for me after a few charge cycles after all the above work.
Good luck. Let us know if it works for you.
W. Raider tips (Sirii):
Bottom line for me of things that helped battery life are:
1. Turing off Siri and Rebooting the phone by holding the Home button and Top button down, ignoring the slider, until the phone shut down. (turn off Siri, reboot, and check top front of iPhone 4S against a lesser camera like the front-facing camera on an iPad2 - making sure the IR sensor is off)
2. Fully draining the battery, meaning using the phone until it shuts itself off from a drained battery and then recharging it to 100% about 4, maybe 5 times. I charged it both with a Mac and a wall charger.
Hope this is helpful!
Comments
jmm514 remarks (Twitter):
I may have found something. I had Twitter disabled in my notifications, but got a tweet today that popped up on my home screen. Didn't know I had this enabled. At the bottom of the Twitter notification settings is the home scrren toggle. Since disabling this, battery life seems better. Considering there is no setting for frequency of checking for tweets, it appears the phone is continually connecting to wifi to check for new tweets.
tmksnyder comments (notifications, corrupt data in iCloud):
For me, I found my iphone on wifi mysteriously connecting to my mac. I eventually narrowed it down to the Apple Move Trailers app which keeps a file in iCloud. The phone was trying to sync the file with the mac in the background even when the Movie Trailers app was closed (hitting the red x). Based on my macosx logs the iCloud process that was trying to sync was working directly between the phone and the mac without using itunes by connecting to an https address hosted on the phone. It was connecting every 3 minutes and failing (while phone was awake or awake during during a notification). I also found that iCloud control panel on OSX would error if I tried to delete the file. I fixed it by removing the App and doing a hard reset which stopped the sync. I probably could have turned off iCloud document sync in the phone but didn't think of that. My battery life has greatly improved while at home on wifi. I am now at 28 hrs standby, 2 hrs 20 minutes of usage, and 68% battery. It was ok before where I could get 20-30 hrs standby and 6 -8 hrs usage. My usage today was phone calls, 3g surfing, and music via bluetooth in the car.
I also found even with Itunes iMatch, if I mass updated tages, art work etc, it would hit the phone on wifi even in standby. I was amazed. Granted if I am not doing updates, Match won't hot the phone so this was a once in awhile event. I could drop my percentage by 5-10% in a matter of minutes when doing updates. I think a lot of our problems are background processes, associated with iCloud, notification, and apps. More features means more battery. I think the key thing is to keep track of what has recently been added or changed if battery life gets worse all of a sudden. It may be an app that was recently installed and if possible you may want to completely remove it and not just quit it.
With twitter, i think it uses push notifications so it doesn't need to be running and actively poll on the phone. For instance , if i quit the mail app, i still will get mail notifications and can swipe the message and load mail. Apple Push Notifications servics maintain the connection to the phone and there are likely pings or connection checks that occur for the service on an os level not an app level. This minimizes the load so there arent a bunch of apps all runing and constantly checking. The notification service , if it is contacted from twitter or another service with data, will check the settings you have registered to the with the apple push service and send the notification to your phone. No matter what, there is a drain with notifications. M hunch is once one application is configured to receive notifications, connection checking occurs betwen the push service and the phone so it knows where it is on the network. If it is implemented correctly, these checks arent frequent if you are still and more frequent as you move. The other drain is for when the noification hits and is processsed. If i get 9 emails over night, my screen just popped up for 20 seconds or so to process each message using battery. I would even think that just go from low power to turning n the screen uses more juice than if the device was already on and i get the message. On nights I get no notifications, I see a 3 or 4 percent drop. On nights with a number of notifications, i have seen up to a 10 percent drop. Besides notifications, wifi sync and icloud will poll on the local network and use up battery if the host computer is on and running itunes or trying to sync a data file that is corrupt (which i had with the apple movie trailers app causing my phone to drain). For me turning off wifi sync and remving a corrupt file in icloud solved my battery issues and I get over 24 hrs of standby with 6 to 9 hrs of use and this is with all the normal location services and push serivices turned on.
See http://developer.apple.com/library/mac/ipad/#documentation/NetworkingInternet/Co nceptual/RemoteNotificationsPG/ApplePushService/ApplePushService.html for more info. I think it has a good overview of how the notifications work.Well seems like that rumor of iOS 5.0.1 is finally gone the way of the dogs since developers got a beta of 5.1. So as stated earlier in the master discussion-> I suspect if you are filling up this thread with false post or creating a master set of links to various post that are unreliable you are wasting your time. Press is not going to touch the story due to poor or inaccurate sources which may be links from the master thread. This can include inaccurate information, combination of conflicting post or postings from users which may not own the device. Reputable press organizations have policies that require discloser and strict rules about what is a reliable source for a story. It is clear that many of the post in the master thread, which are links presented here are questionable.
Sorry to say that postings taken without any analysis of their totality have been propagated via various sites, for example sites such as http://www.2012federalbudget(dot)com. (Do not visit but I suspect that this is not the 2012 federal-budget site you would expect based on analysis of the records. There are plenty of sites like http://www.2012federalbudget(dot)com propagating questionable post in these threads.) One site for example in the discussion thread used a self signed certificate, the site had a log in to allow users to enter their OpenID. Seems many of these sites are pop and drop drupel configurations.
So remember this is how the really bad rumor of iOS 5.0.2 got started, the 5.1 memory leak issue, iCloud Issues, call quality, address book, etc.
Some of the postings have been very comical, I think the latest now is a dropbox issue. Seems that the length of the previous thread has resulted in various app engines of some proxy servers/tools reaching their limits.
So I would make sure to know the source of any information you link to. Make sure you avoid entering any information to outside links such as OpenID or Apple ID, these are big prize items for anyone with malicious intent. If you have issues and are a valid user contact APPLE CARE. (Note link is using McAfee Secure Short URL Service, and is https.)
http://mcaf.ee/ricdt
The original solution still represents a high level of success for users having any battery issues.
Install 5.0.1 on your iPhone 4s. Some users posting they are still using older versions, bad fake serial numbers, etc.
Make sure your device can run iOS 5.0.1 and is not altered.
Make sure you use a new Sim, not some cut down version which many users admit to doing. (Again, worth confirming what people are posting.)
Reset the device doing a hard reset and software reset.
Let battery drain and then charge for the full cycle, which is 24 hours.
I think you will find you will get the battery usage that APPLE has stated for the device.
Best of luck, stay safe and thanks -
should read "you have chosen not to trust Thawte SSL CA." Our help desk says I need to set this as a trusted cite on Firefox 4. I can't find an option to do so.
That happens if that root certificate is not installed in Citrix.
See http://support.citrix.com/article/CTX711855 -
Hi, I have the problem which iTunes cannot detect my iPhone 4s. I tried the steps you have provided in your troubleshooting, but it won't work for me because the Apple Mobile Devilce is perfectly installed on my windows. However, the driver "Microsoft teredo Tunneling adapter" has a yellow exclamation mark, which i believe means it's not installed correctly or something is wrong with it. This driver is under the Network Adapters (Please see picture below).
This is what happens when I connect my iPhone 4s to my laptop (Windows 7 Starter 32-bit)
1. The phone charges it's battery
2. I can open it in My Computer and import/export media files.
In iTunes
3. It start to sync until step 3 then stops.
4. The iPhone option with an arrow appears beside the iTunes Store, but when the arrow is clicked it disappears.
I hope you can provide me a solution for this problem.
Thanks,
RalphHi ralphagir,
Welcome to the Apple Support Communities!
For your iTunes issue with it not recognizing your iPhone, I would go ahead and suggest deleting iTunes and all of its components from your Windows computer and installing fresh.
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Remove iTunes and related components from the Control Panel
Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
As far as the arrow button that you click and the iPhone disappears, it sounds like you may be clicking on the eject button. Please take a look at the following article for information on the eject button in iTunes.
Safely disconnect iPod
http://support.apple.com/kb/HT1853
Have a great day,
Joe -
I have had an iPad 3G for more than a year now. I did not get it with a SIM card, since I expected to use almost completely at home, where we have wireless internet. Eventually, I decided it would be handy to be able to take it on the road, and signed up for pre-paid Internet with KPN (national Dutch telecommunications company). That worked fine, until the last big iPad software update. Since then, whenever I try to make a connection outside the house, I get the following message…
Mobile Data Account
You have not signed up for a data plan.
Would you like to set up a new account?
If you don’t, you can do it later in Settings.
…with the options of ‘Later’ or ‘Now’ to press. If I press Now, I get a screen “Please wait while the page is loading – this should only take a few seconds to complete.” But it never does, the ball just keeps spinning and spinning and spinning….
To my mind, with pre-paid internet I should not HAVE to set up a Mobile Data Account in the first place. I’ve checked with KPN, and my account is completely in order. I’ve checked with the local Apple store, and the geniuses say they’ve never seen this. Can anyone help me?I updated to 3.6.4 and when I went to NetFlix to watch the next show of a series, it said
something like
Installation complete, restart your browser.
I restarted browser, same problem. Restarted comp. Same problem.
I updated Adobe Flash 10.1, still same problem.
But able to watch some vids on other sites, but full screen gave me the big blank white screen with audio only, had to click around in the dark ( so to speak) to find the minimize button.
I did a System Restore to before the Firefox and Adobe updates.
I then did not update Firefox as recommended and went to NetFlix and wellah, i can view the movies again.
And Full Screen is fine.
I then experimented and updated Firefox only, went to NetFlix and got same msg with no viewable shows.
So did a System Restore once more.
Staying at 3.6.3 for a while longer until I know I can watch my movies.
I don't own a TV, so this is my only form of an occasional escape.
I do hope this is figured out soon.
With what I have done, it seems to be Firefox, Not Flash.
Good Luck to us all. -
Hi!
This might be a stupid question, but I just bought an IPod G5 60 GB. When you firstconnect your IPod you have to setup your ID. I'm using my brothers computer, who has an IPod too, so now I'm wondering when I set up my ID with his Itunes does his Ipod still work with it??? Or would his ITunes just see my IPod? Or does his Ipod ID change to my ID?
Or does it work without any problems, to setup two IDs on the same computer??
Thanks!Hi!
This might be a stupid question, but I just bought an IPod G5 60 GB. When you firstconnect your IPod you have to setup your ID. I'm using my brothers computer, who has an IPod too, so now I'm wondering when I set up my ID with his Itunes does his Ipod still work with it??? Or would his ITunes just see my IPod? Or does his Ipod ID change to my ID?
Or does it work without any problems, to setup two IDs on the same computer??
Thanks!
Maybe you are looking for
-
Room is not available at the time of Event Creation
Dear All, I have created these objects.. Resource (Room1) Location (Campus1) Resource Type (Lecture Hall) I already associated Resource with Location and Resource Type. Apart from it I have Linked Resource Type with Business Event Type. But still whe
-
IReport and JRHtmlExporter : Problem in reloading images
Hello I have created the report with IReport and exported to the HTML format. The problem is when i reload my webpage , in backend error is shown that "Cannot write to image files". Does that mean when i refresh the page stream is still writing the i
-
hi , i am unable to login as apps please help me out when i run dp01era0 $ sqlplus apps/******* SQL*Plus: Release 8.0.6.0.0 - Production on Mon Mar 9 13:57:21 2009 (c) Copyright 1999 Oracle Corporation. All rights reserved after this it does not go f
-
About Upgrade specification for each Firefox version
Dear Everyone, I would like to ask all of you about Upgrade specification of each firefox version. <Platform> Window Vista 32bit / Windows 7 32bit <Target version> - Firefox 3.6.19 - Firefox 4.0.1 - Firefox 5.0.1 <List of question> 1. Is Firefox 3.6.
-
My localised app says it runs in English on iTunes
Hi Recently I released my first app. Initially things are going well, however I have one confusion: My app is localised and runs in 9 different languages, however when I check it out on the localised iTunes (say, the jp store for example) under the v