Do you have to remove the smartcover to charge iPad2 on the charging dock?

I kinda tried to do it but it seemed like a tight fit so I was afraid I might hurt it and your answer really solved my question but I am new here and I messed up and only selected that it helped me. Sorry for that. Thank you very much!

Similar Messages

HT201269 Do you have to remove the sim card after erasing the iphone

Before sending to Gazell do I need to remove the sim card from the iphone 4s

Thanks ~ in todays environment the last thing I want is people getting my personal information.

Hi I sold my ipad and now the guy tells me I have to remove the ipad from my apple account, how do I do this ? or is the guy worng? thank you,,

Hi everyone,
I sold my ipad and now weeks after the guy tells me I have to remove the ipad from my apple account so he can use itunes? is this right? if so how do I do this?
Thank you,
William,,

Remove device from account.
http://support.apple.com/kb/TS4515

I have a regular service that cleans up my computer. We have had to remove the latest version three times because of compatibility issues. To report issues you have to download the latest version which appears to be the problem.

Mozilla sometimes goes a head and loads the new version and we do not get it in time. We may switch to Explorer to avoid continuing problems. Contact iYogi or McAfee for clearer explaination.

If the light will not turn on the TC is dead. No matter that the hard disk is running.. it should only run at start up or when it is accessed not constantly.. that means the board in the TC has failed. Apple do not repair them.. They will replace it under warranty or applecare.
If you have gone over the 12month warranty it will still be covered if you have applecare on any computer or an Apple TV. In fact the cost of the apple TV plus apple care is still cheaper than buying a new TC.. so it is a route some people are taking.. certainly depends.. in some places like Europe or Australia now, there is a recognition that statutory warranty must be longer on a product that is premium to the market. 12months is not good enough. Apple will sometimes listen.
They might be fixable but I do not know how.

I keep getting this pop up. This web page is being redirected to a new location. Would you like to resend the form data you have typed to the new location? Can you please help me figure out how to get this to stop!

This pop up has been occurring about once a minute when I am on certain sites.
This web page is being redirected to a new location. Would you like to resend the form data you have typed to the new location?
How do I get it to stop?

-> Tap ALT key or press F10 to show the Menu Bar
-> go to Help Menu -> select "Restart with Add-ons Disabled"
Firefox will close then it will open up with just basic Firefox. Now do this:
-> Update ALL your Firefox Plug-ins https://www.mozilla.com/en-US/plugincheck/
-> go to View Menu -> Toolbars -> unselect All Unwanted toolbars
-> go Tools Menu -> Clear Recent History ->'' Time range to clear: '''select EVERYTHING''''' -> click Details (small arrow) button -> place Checkmarks on '''Cookies & Cache''' -> click "Clear Now"
-> go to Tools Menu -> Options -> Content -> place Checkmarks on:
1) Block Pop-up windows 2) Load images automatically 3) Enable JavaScript
-> go to Tools Menu -> Options -> Privacy -> History section -> Firefox will: select "Use custom settings for history" -> REMOVE Checkmark from "Permanent Private Browsing mode" -> place CHECKMARKS on:
1) Remember my Browsing History 2) Remember Download History 3) Remember Search History 4) Accept Cookies from sites -> select "Exceptions..." button -> Click "Remove All Sites" at the bottom of "Exception - Cookies" window
4a) Accept Third-party Cookies -> under "Keep Until" select "They Expire"
-> go to Tools Menu -> Options -> Security -> place Checkmarks on:
1) Warn me when sites try to install add-ons 2) Block reported attack sites 3) Block reported web forgeries 4) Remember Passwords for sites
-> Click OK on Options window
-> click the Favicon (small drop down menu icon) on Firefox SearchBar (its position is on the Right side of the Address Bar) -> click "Manage Search Engines" -> select all Unwanted Search Engines and click Remove -> click OK
-> go to Tools Menu -> Add-ons -> Extensions section -> REMOVE All Unwanted/Suspicious Extensions (Add-ons) -> Restart Firefox
You can enable your Known & Trustworthy Add-ons later. Check and tell if its working.

HT4528 I just bought an IPhone 4s and when I plug it into my Windows 7 Toshiba it does not recoginze the phone...I have already removed the ITunes software along with the rest of the software and reinstalled...no go.I want to transfer phone video to my co

I just bought an IPhone 4s and plugged it into my Toshiba Windows 7 (64 bit) OS and it failed to recognize the phone. I checked in the tech community and discovered that I need to remove all the software assoicated with the phone and start over....I followed the sequence exactly...reinstalled the software and it still doesn't work. I am trying to download the IPhone 4s video to my computer and without a USB interface that works my memory capactiy will fill up fast....I've already been into the control panel....stopped and restarted the Apple service....I am stuck...can anyone offer some suggestions or knwo if there is a fix for this issue..??
Thanks,
Eric

I solved my own problem....I simply moved the cable to another port while moving the mouse to the USB ports on the opposite side of the computer....and the computr finally recognized the phone...I know it sounds weird but it worked...so if you are having the same problem that had trying removing all the crap you have plugged into the USB ports on your computer THEN plug in your IPhone 4s...use the cable that came with the phone and nothing else...good luck..>!!!

After update to IOS 4.3.5 my Iphone incoming and out going calls is not working properly and I have to remove the SIM regulerly to conduct or receive a call

after update to IOS 4.3.5 my Iphone incoming and out going calls is not working properly and I have to remove the SIM regulerly to conduct or receive a call
It is not practicale to do this always any one faces the same problem

There may be a problem with the SIM card. Get a new SIM card from your carrier - there should be no charge for a replacement.
If no change with a new SIM card, the standard troubleshooting steps in order are:
Power your iPhone off and on.
An iPhone reset, which is done by pressing and holding the home button and the sleep/wake or on/off button simultaneously until you see the Apple logo and then release.
Restore your iPhone with iTunes from your iPhone's backup.
Restore your iPhone with iTunes as a new iPhone or not from your iPhone's backup.
If no change after any of these steps in order, your iPhone has a hardware problem.

How do I restore my passcode (not password) in my iphone5s. It's the one that is asked whenever you have to unlock the phone. I got used to having my thumb mark open it that I forgot it after my phone got recharged after it drained out.

how do I get my passcode (not password) in my iphone5s sent to me via email. It's the one that is asked whenever you have to unlock the phone. I got used to having my thumb mark open it that I forgot it after my phone got recharged after it drained out. Apparently, the fingerprint won't do after the phone was drained and recharged again. The passcode has to be typed in. I don't usually allow my phone to drain out except this one time on a long trip. Hence I forgot my passcode and I prefer it being sent to me via my registered email. I know that if you enter it several times, the phone gets locked out over certain periods from 1 minute to 60 minutes so I don't want to take that risk. Any suggestions?

First, this is a user-to-user technical support forum, not a way to communicate with Apple.
That aside, no one can email your passcode to you because no one (not even Apple) knows it. The passcode exists in only one place - on the phone. You will have to restore the phone using the computer that you regularly sync it to. This will reinstall iOS, remove the passcode, and restore your most recent backup.
Edit:
See: iOS: Forgotten passcode or device disabled after entering wrong passcode for more details

Applications problem: "You cannot update this software since you have not owned the major version of this software."

Hi all,
RE: Applications problem: "You cannot update this software since you have not owned the major version of this software."
Until recently, I have not encountered this problem. And I am facing this problem for both my iPad and iPhone.
I only have 1 iTunes account and the most recent change was that I switched the location from Singapore to UK (I'm currently in the UK). I also updated my applications a couple of times before since the change in location, so I doubt it's due to the location change. I've tried signing out of the account in the iTunes accounts on the devices, then signing back in. I've also tried restarting the devices (and for the iPad, I even updated the iOS).
Any idea what else I can do to try to rectify this?
Thanks and regards,
Tammy

Hi there!
Thanks for replying!
1. Yup, my iOS is the latest (6.0.1), and I have 7 apps on my iPhone that apparently have updates. But it's been 6.0.1 for quite some time and I've also been able to update the apps till just this week.
2. I don't have a credit card associated with my account anymore. Ever since I changed the location, I removed the credit card details. But I didn't have problems with any of my apps (updating or downloading new ones) until this week. Also, all the apps I've downloaded since I came to the UK are free apps.
I still don't know what's wrong.

Do I have to remove the sim if I want to use wifi only on ipad 2, or is there a way I can switch without removing the sim each time?

Hi do I have to remove the 3g sim everytime I plan to use only the wifi as I have only a small 3g package for when wifi is not availiable and dont want to use all if my 3g usage when i could be using wifi instead,

You're welcome.
Don't be silly, it's a perfectly good question!!
Matt

Hi. I am trying to buy Apperture as my trial version has expired. I cannot buy the full version as I get a message saying it is already installed. Do I have to remove the trial before I can buy it? When I launch Apperture, I follow the link "buy"

Hi. I am trying to buy Apperture as my trial version has expired. I cannot buy the full version as I get a message saying it is already installed. Do I have to remove the trial before I can buy it? When I launch Apperture, I follow the link "buy"

If you are purchasing from the Mac App store, then you would drag the trial version to the trash first and empty trash (since the trial version has expired).
Launch the Mac App store > sign in with your Apple ID > purchase Aperture (this is cheaper than the previous retail version many of us purchased anyway).
Note - you can rename your Aperture Trial library as needed if you want to work with that one once the full version is installed.

Can you use color splash on a photo that was edited in black and white or do you have to mask the photo before editing it in black and white?

can you use color splash on a photo that was edited in black and white or do you have to mask the photo before editing it in black and white?

I think you are asking whether it makes an difference whether you create the mask before or after you edit the black & white version. The answer is that since the color version and the b&w version are on different layers (as seen here), it makes no difference when you edit the b&w version.
Also consider another technique that separates the color element in the image. Here, the area surrounding the color image is a line interpretation of the scene, similar to a Tone Line Conversion, a technique that was created with film many years ago. (I am so old, I still remember how it was done.) This is how to get the result similar to the one shown above but with a line illustration created in Photoshop replacing the b&w layer version:
1. Open an image. This technique is more successful if the image you select has many clearly defined edges.
2. Make a duplicate layer. (Cmd+J). It becomes Layer 1
3. With Layer 1 chosen, go to Filter>Blur>Smart Blur. Set the Quality to High and the Mode to Edge Only. The default settings are Radius 3.0, Threshold 25.0. To increase the amount of detail in the line conversion, raise the Radius setting. Use the white-on-black illustration within Smart Blur as a guide. Then click OK.
4. The line illustration will appear as white lines in a black background. To change this to black-on-white, choose Image>Adjustments>Invert.
5. Insert a new layer below Layer 1. It will serve as the background for the line illustration. To do this, hold down the Command key while clicking on the New Layer symbol at the bottom of the Layers panel. It is the second symbol from the right. It will become Layer 2.
6. Fill this new layer with a light color. To do this, click on the Foreground Color symbol in the Tools section. It will open the Color Picker. Choose a light color and click OK.
7. Choose Edit>Fill. Use: Foreground Color. Mode: Normal. Opacity: 100% and click OK. Layer 2 will fill with the color. Although it will not appear in the image because Layer 1 is above it, a quick check of the Layers panel will confirm that the color you chose has filled Layer 2.
8. Remove the white area from in Layer 1. Go to Layer 1. Choose the Magic Wand tool. Uncheck the Contiguous box in the Options Bar and click in a white area of the image. Next, click the Delete key. Choose Select>Deselect to remove the marching ants.
9. (Optional) You may now change the line illustration in Layer 1 from black to a dark color compatible with the color in Layer 2. To choose the color, click on the Foreground Color symbol in the Tools section. It will open the Color Picker. Choose a suitable dark color and click OK. While in Layer 1, click the first symbol next to the word Lock: in the Layers panel above Layer 1. This will prevent the dark color from appearing in the blank area of Layer 1. Choose Edit>Fill. Use: Foreground Color. Mode: Normal. Opacity: 100% and click OK. The black lines will change to the dark color you chose.
10. Combine Layers1 and 2: While in Layer 1, choose Layer>Merge Down. The layers are combined into a single layer called Layer 2.
11. Add a black mask to Layer 2 by clicking on the Mask symbol at the bottom of the Layers panel. It is the symbol to the right of the fx symbol. Where you would like full color objects to appear within the line rendition, paint in white on the black mask with a brush set to either soft-edge or hard-edge as the illustration and your taste dictate.

I received notice about a new cover art requirement (1400x1400 pixels) but can't find a way to change my existing art. My podcast has been updating flawlessly for several years, so I'd hate to have to remove the feed and start over.

I received notice about a new cover art requirement (1400x1400 pixels) but can't find a way to change my existing art. My podcast has been updating flawlessly for several years, so I'd hate to have to remove the feed and start over.

Please note - this was not a personalized email - Apple is sending this out to ALL podcasts that are listed on iTunes.
If you are hosting with Libsyn or most any other "Podcast" host you should be ok.
http://blog.libsyn.com/libsyn-servers-are-byte-range-enabled-and-100-compliant-w ith-i-tunes-requirements
If you are on a self hosted site or worse yet using some file storage service like Dropbox - then you are going to have issues.
Again - this leter from Apple does not mean anything is wrong wth your show specifically - it is a generic letter going out to all podcasters.
Rob W
podCast411

This web page is being redirected to a new location. Would you like to resend the form data you have typed to the new location?

This alert pops regularly every 10-15 minutes:
This web page is being redirected to a new location. Would you like to resend the form data you have typed to the new location?
I did some serious research / checked for viruses / removed and reinstalled Thunderbird and Firefox. Please read this carefully.
1. With Firefox closed (default browser), I can open T-bird without any issues and use it just fine.
but,
2. the minute that I open Firefox, T-bird give me a popup message of: This web page is being redirected to a new location. Would you like to resend the form data you have typed to the new location? This is not under the Firefox Browser. It is under the T-bird Tab of my computer.
It does not matter what kind of email you have open, whether it be text or HTML. It pops up.
If I have T-bird open (default email client) and use Chrome or IE with Firefox closed it doesn't happen.
Computer is Windows 7 Pro x64-Bit.

This started after the latest Thunderbird update was applied. Like you I have done the same check outs. I found that Thunderbird starts then, without any direct request, FireFox starts as well. Then the messages start popping up. Have already checked and confirmed that the old FireFox posting fixes did not impact the behavior. Looking for an answer.
Same configuration Windows 7 ThinkPad T430.

You can not update this software since you have not owned the major version of this software.??

I have recently been having issues signing into my Apple ID and decided to go in and update my email and change my password.
Since changing my email and password I have been unable to update any of my apps. I receive this error message when trying to update, "You can not update this software since you have not owned the major version of this software."
I have looked into other forums and communities for a solution to this issue but from what I have read iTunes/Apple has yet to figure out a solution.
I have also read that the cause of this issue can be linked to two things.
One, is if you have multiple accounts on one computer. I only have one iTunes account/ Apple ID on this computer. This is my personal laptop and no one else has ever loaded on another account.
The second cause is linked to the country to which the apps were downloaded in. My computer and Apple ID were both created in the US, however 9 months ago I moved to New Zealand on a one year work holiday visa. Since living in New Zealand for the past 9 months I have been buying and updating apps, it wasn't until today when I received this error message.
I would really like to find a solution to this problem, but at the very least I would like to know what exactly caused this issue so that others may hopefully steer clear.
Any help would be much appreciated!
Cheers.

I think the issue is that iTunes (for whatever reason) thinks I have two Apple ID's.
also, to further complicate the issue, when i try updating the apps from my iPod the iTunes store is still recognizing my old hotmail Apple ID. So when I go to enter my password it won't accept because it doesn't match with the old Apple ID, even though it is the same account (just new Apple ID name).
I have tried signing out within the App Store and re-signing in with my Apple ID but it still brings up my old Apple ID name when I try to update.

Do you have to remove the smartcover to charge iPad2 on the charging dock?

Similar Messages

Maybe you are looking for