Do you have to upload all new pages if you edited the template file?

I've edited a template in Dreamweaver and applied all changes to pages that use this template.
Previously, I had been uploading the templates onto my server, but after realizing that uploading the edited template to the web the pages didn't change.
When you edit the template in Dreamweaver shouldn't it automatically pull from the new template when you look at the pages online? OR do you have to upload each new page to your server that used that template?
or in other words..
Does the webpage pull the information from the template in Dreamweaver or from the server?
Thank you.

Any pages that have been updated after the template has been updated will need to be uploaded to the server. The pages do not automatically "connect" to the template and reflect it's rendering while on the server - that would require Server Side Includes or a dynamic server-side language (like PHP or ASP .NET) .

Similar Messages

How do you edit the template image that appears at the top only in portrait mode?

I am using a customized version of the iBooks Author template which has the space image. I have replaced the images for the book cover, chapter and section. But I noticed that when you rotate the ipad to view the entire TOC, the original space image is still there. How can I edit the template image that appears at the top of the Table of Contents only when you rotate the ipad in portrait view?

I just tried w/that template - switched to Portrait mode...tapped once to select that image....cut - gone. Switched to Landscape...not there. Back to portrait...still gone.
What process did you use?
Can you repeat your issue with a fresh book?

How do you edit the audio files in the slideshow of my idvd project?

I have created a project in idvd and I dragged and dropped in the music files from the audio tab that I wanted - I selected multiple songs (2) and I hear them play just fine. The problem is that I want one song to play for a certain section of the photos and then I want the other song to start at a particular point. Why am I not able to edit the music in the slideshow and how can I do that?

iMovie is a good way to do this if your project is film based. If your using photos (slideshow) in iDVD, I would be inclinded to use GarageBand to edit the audio portion of your project (It may be just me, but whenever I've attempted to create a slideshow in iMovie, the photos look "grainy" to me, not as clear).
If you know the time of when you want your songs to change, you can adjust the length (time) of each song in GarageBand as well as fade in/fade out transition of the two or more songs. After saving, you then can access the saved audio mix via the audio tab in iDVD. (I'm making an assumption that one might be familiar enough with GarageBand to do this

Can you edit the HOSTS file on an iphone?

Is there a way to edit the iPhone equivalent of an /etc/hosts file? This is necessary to access some internal test/dev resources on our network. Jailbreaking is NOT an option. Creating and installing configuration profiles via the iPhone Configuration Utility would be allowable.

Why? There's no way they are going to pay a licensing fee for something like that.

HT201210 I have done all of the things on this list, to include editing the hosts file with no the same error each time (3194). I am trying to restore my iphone 4 ios 6 to get it unlocked. Diagnostics show no issue communicating with apple. Help.

I am trying to restore my iphone 4 ios 6 to acheive unlock. hit restore and it unloads software, confirms with apple then displays the 3194 error. I have turned off my virus scanner, unplugged all usb except for iphone, edited the hosts file and run diagnostics which showes communication with apple is fine. What do I need to do to get my ipone to restore?

There is nothing wrong with the OS update.
Delete ALL your email accounts.
Restart Playbook
Put the accounts back and ensure they are all set with PUSH ON. Manual (push off) will burn battery.
Similarly delete your wifi connections and add back when required.
Turn off wifi is not connected to wifi.
Any "hunting for connection" in email or wifi will burn up battery.

HT1329 I have just uploaded a new operating system (windows 8.1) on to my computer but seem to have lost my itunes library. Can this be restored? Can I plug in my ipod and syncronise so that my ipod library transfers to my computer Itunes account?

I have just uploaded a new operating system (windows 8.1) on to my computer but seem to have lost my itunes library. Can this be restored? Can I plug in my ipod and syncronise so that my ipod library transfers to my computer Itunes account?

Have you failed to maintain a backup copy?
You should never update without making sure your backup copy of your computer is up to date.
You can transfer itunes purchases from an ipod to computer: File>Devices>Transfer Purchases

Just edited 20 film in FCPx all about 6 mins long all on 1 x 250gb flash drive Now i have another 10 to do but have no room on that drive. So i have been using my new 2tb drive to do the next 10 films with the footage on that drive, but i need elements f

Just edited 20 film in FCPx all about 6 mins long all on 1 x 250gb flash drive
Now i have another 10 to do but have no room on that drive.
So i have been using my new 2tb drive to do the next 10 films with the footage on that drive, but i need elements from the first 20 films ie; graphics, common film elements etc to be added to the new 10 films.
So I have copied all the footage, events and project folders from the 20 edited films over to my 2tb drive in a separate folder - ejected the 250gb drive (as i only have 2 thunderbolt slots and one is used for a 27 inch monitor on my macbook pro)
.......my question is how do i load all of the 20 films into my project library so i can see all of the 30 films at once so i can copy and paste form one film to another - is this possible? and withlout messing up lol

// any reason, why you color your post to 'invisible' low contrasted colors?? //
I'm confused:
by concept, there's Events and there's Projects.
Events and Projects can be internal or on any ext. drive.
You can use any Event in any Project.
… so, why is the 'location' of your files on any relevance for your Projects ??
Or, do you want to re-import done-Projects as 'Events'? Export,Import, done… (??)
… sorry, maybe I'm just lost intranslation

If I buy a photoshop CS6, will I in future have access to all new rawfiles for new cameramodels?

If I buy a photoshop CS6, will I in future have access to all new rawfiles for new cameramodels? Will it update automatically?

yes and no.
adobe periodically releases it dng converter which is a stand-alone app that always raw file conversion no matter the app version, http://www.adobe.com/support/downloads/product.jsp?product=106&platform=Windows
each app/version can be updated automatically up to a certain point. currently cs6 accepts the latest cr update, 8.3.

Do I have to get all new apps if I convert from PowerPC Mac to Intel?

Do I have to get all new apps if I convert from PowerPC Mac to Intel?

andyBall_uk wrote:
but they perhaps loosely paraphrase " How compatible your application is with Rosetta depends on the type of application it is. An application such as a word processor that has a lot of user interaction and low computational needs is quite compatible. An application that requires a moderate amount of user interaction and has some high computational needs or that uses OpenGL is most likely also quite compatible. One that has intense computing needs isn’t compatible. This includes applications that need to repeatedly compute fast Fourier transforms (FFTs), that compute complex models for 3-D modeling, or that compute ray tracing." as including Photoshop among apps that have " intense computing needs " - maybe the wiki author found that to be the case on an older machine?.
Very loosely! Actually that quote from Wikipedia is wrong with regard to Adobe Photoshop and should be corrected (at least as it applies to version 9, CS2, after which, later versions, starting with CS3 do not need Rosetta in any event).
While I am not sure about the rest of that quoted phrase (acually in most of my posts on this forum indicating my solution for running PowerPC applications [Installing Snow Leopard with Rosetta into Parallels] in Lion or Mt. Lion, I do note: "Computer games with complex, 3D or fast motion graphics make not work well or at all in virtualization." I do, however, see this as a virtualization problem and not a Rosetta problem (as opposed to these programs running on a computer that can actually boot into Snow Leopard and run these programs in emulation, where Rosetta should not pose a problem).
My experience with Adobe Photoshop is limited to CS2, which is now available for free download from the Adobe website. My uses for this program are limited, such as when one frustrated Mt. Lion upgrader noted that Apple should post a flag about the loss of Rosetta (see my graphic posted above).
But my understanding is that Adobe Photoshop (at least up to version CS2) does not require any rendering, which could be hampered and slow in virtualization and perhaps additionally with Rosetta.
Use of Photoshop 9 (CS2) appears to be similar to use of Freehand MX and none of the users of either of these powerpc applications have come back with any complaints after my suggestion to them on how to continue to run these powerpc apps in Lion or Mt. Lion.

Is there a way to get all new tabs to open to the right of all extant tabs?

I just upgraded from to 3.6.10 and now when I open a tab by right-clicking on a link in a current tab, the new tab opens somewhere other than the far right end of all the tabs I have open.
I want all new tabs to open to the right of the tabs I already have open, just like they used to with the previous version of Firefox I was using.

Type '''about:config''' in the URL bar and hit Enter. <br />
''If you see the warning, you can confirm that you want to access that page.''
Filter = '''browser.tabs.insertRelatedAfterCurrent'''
Double-click that preference to change the value to '''false'''

TS1702 i have erased my all phone contact list and then the message comes that it will be deleted with in an hour. but now my phone is not starting and only the apple logo appears on the screen. what should i do now..!

i have erased my all phone contact list and then the message comes that it will be deleted with in an hour. but now my phone is not starting and only the apple logo appears on the screen. what should i do now..!

That number is for an apple server in the UK that is used for iMessage activation. A hidden SMS is snet to that number when you turn iMessage on and is used to verify your phone number. I suggest you turn iMessage off. In settings/phone turn on dial assist. Check with your carrier to see if you can send an international SMS as you end that possibility to activate iMessage. Rest your phone (Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for device to restart (no data will be lost).) then turn iMessage back on.

New page for group headers - the first page is blank

In the Section Expert, if you set the Group Header #1 to "New Page Before", and there is a Page Header section, the first page will show the Page Header with no further data. The rest of the report does the page breaks correct, that is, a new page every time the grouping changes.
How do you stop this blank page at the beginning?
If you assign New Page After in the Group Footer, there is a blank page at the end of the report, which is also annoying. What am I missing?
Robert

If you are using "New Page Before" then use the condition by clicking on X+2 corresponds to it and write
Not OnFirstRecord
For "New Page After" write
Not OnLastRecord
Regards,
Raghavendra.G

I have never used my mac for desktop publishing before and am having some problems. This sounds really dumb, but I can't figure out how to put a border around a text box. Also, how do you edit the border, i.e. border color, thickness, etc. Help!

I have never used my mac for desktop publishing before and am running into some real problems. How do you put a border around a text box? Can you edit the border - color, thickness, etc.? Help!

I think the best solution is to read Pages documentation, go to Help and you have a long list of options. Pages is capable of quite sophisticated things, some features are above Nisus or Mellel, so it is not so simple to summarize things in a few lines.

TS3048 I have just purchased a new apple cordless keyboard. The numeric line of keys along the top are not functioning as they should. For example I am unable to get a question mark or a forward slash. I have tried holding down both shift and alt keys.

I have just purchased a new apple cordless keyboard. The numeric line of keys along the top are not functioning as they should. For example I am unable to get a question mark or a forward slash. I have tried holding down both shift and alt keys.

Thanks for prompt response - I tried what you suggested but I'm afraid it has not helped. It seems as though the line of number keys along the top aren't actually doing what is printed on them. Some are OK, but the further towards the right hand side of the keyboard you go, the less predicatable it becomes. So whilst the second key from the left gives me 1 and ! when holding the shift key, by the time I get to the 6 when I press and hold shift I get ^ rather than & symbol which is what is actually printed on the key. The & symbol is actually on the next key along - and when I hit the key with 8 I get * rather than the ( which is printed on they key but actually located on the next key along. Things get even more muddled by the time I am over on the right hand side as rather than a question mark (I have had to type the word as I cannot find the symbol anywhere!) I get this _ and the other symbol marked on the key is a comma, but I get - instead. It is going to drive me mad if every time I want to type something it is a guessing game....! What do you suggest - question mark

Why does the new operating system not delete the moved files from their original location - it seems like an enormous waste of space, time and effort to clean up every file once you've moved it

Why does the new operating system not delete the moved files from their original locations - it seems like an enormous waste of space, time and effort to clean up every file once you've moved it - also, when transferring large amounts of files it becomes a very large problem remembering which files were transferred and which not.

You're going to need to be more specific, as I'm not quite sure I understand what you're talking about.
If you're referring to copying from an external hard drive or flash drive, and you want to actually move files rather than copy them, you can hold down the option key to force it to do a "move" rather than a "copy." This is not new behavior, though... the Mac OS has worked this way as long as I can recall (and I've been using it since 1984).
If you're having a problem with trying to move files from one place to another on a single drive causing them to be copied instead, that is likely because of some permissions issue preventing you from actually being able to move them.

Do you have to upload all new pages if you edited the template file?

Similar Messages

Maybe you are looking for