Do you install the latest windows support software in boot camp?

,or do i have to get it off the apple website or anywhere else.

You install the latest Apple drivers for your specific BootCamp and Mac model versions, as available off the Downloads section in Apple Support.
And you install the latest Windows Updates as available on the Windows control panel.

Similar Messages

Having problems downloading the latest Windows support software by Apple

Hello, I am trying to install Windos 7 in my imac, via bootcamp, but every time I try to download the latest Windows support software for my imac, using bootcamp assitant, in the beggining of my download a message appears that I can not download this software because it is not available in the Software Actualizations Server. I have seen a lot of videos as to how install windows in my imac, followed every step, but I keep on having this same problem that does not let me finish, and in the videos they do not say anything about this issue. I have had this problem since yesterday. If anyone can help me, thank you.

Welcome to Apple Support Communities
I do not recommend to download the Windows support software from Boot Camp Assistant, as it often fails.
Instead, most Macs can download the Windows support software from the Apple website. Go to this website, and choose your Mac model and the Windows version you wish to install (under "Boot Camp requirements by Mac model"). Finally, download the correct Windows support software

When I begin to attempt to download the windows support software in boot camp, it says the windows support software is unavailable. Is there any other place I can download it for a Macbook Pro 5,5 intel core 2 duo without the original CD?

When I begin to attempt to download the windows support software in boot camp, it says the windows support software is unavailable. Is there any other place I can download it for a Macbook Pro 5,5 intel core 2 duo with snow leopard without the original CD?

Hi,
apart from the MacBook Air this feature is of no use for other Macs right now.
Simply ingnore it (click "I already have the Drivers...) and continue with the installation.
Sorry to say but you need the OSX Install DVD for the BootCamp Driver installation.
The 3.0 version of the BootCamp Drivers is only avaiable on the disc.
Later updates (3.1 and 3.2) can be downloaded from Apples Support website.
Call Apple and ask for a replacement and they usually send you one for a small fee.
And have the Serial-Number of your Mac at hand when calling.
And since the OSX Install DVD can also be vital for maintenance and repair it is best to have one.
The needed BootCamp Drivers are on the OSX Install DVD 1 that came with your Mac.
Insert that disc while in Windows after the Windows installation to install the drivers.
Regards
Stefan

Downloading windows support software through boot camp stuck around 20 percent of the way.

downloading windows support software through boot camp stuck around 20 percent of the way. tried several times same thing. I don't have original snow leopard disks. MBP mid 2010 8gb ram 15'. is there any other way to get the drivers for Windows? I do have latest LION...

I personally never had problems with these downloads in Lion but it seems to be flaky for others.
In this threadhttps://discussions.apple.com/message/16605226#16605226there's a link to download the BootCamp 4.0 Driver package.
Stefan

How Can I Download 'Windows Support Software' after Boot Camp Install of XP?

I successfully ran Boot Camp and installed WinXP SP3 on my son's 2009 MBP, which is currently running OSX 10.6.8. We were prompted to download the Windows support software, and said 'yes', but it would not allow us to download anything.
Is there a website we could download the 'Windows support software' directly from?
As a result--I think this is due to lack of 'Windows support software'--we are unable to connect to our wireless network for internet while on the WinXP partition.
At this point he cannot locate the original disk that came with his MBP. I'm wondering if that original disk would even be appropriate, since his MBP came with 10.5 originally. He is on his 3d hard drive (Applecare!) and they loaded 10.6.8 this last time.
Thanks,
Greg

10.5 OEM or retail DVD is the best and maybe only place to get XP 2.x drivers to get you started so you can then update Boot Camp support drivers to 2.2.
Replacement OEM DVD from Apple - call - are probably $10-20.
There were Boot Camp 2.1 and 2.2 direct downloads, just not for the 2.0.x that you need first to get started. Weird method. Posting seems to antathema.
I deleted my old bookmarks but those drivers were found from support page:
http://www.apple.com/support/bootcamp

Hi, where can I manually download windows support software for boot camp windows 7 installation, I am trying through boot camp but its like taking forever to download its been 5 hours but boot camp still have't completed the download

can any one give me a link to download them manually

create a Windows support software (drivers) CD or USB storage media
http://support.apple.com/kb/HT4407
Advanced Network: Proxy Settings, I uncheck "Auto Proxy detection" and make sure you have the interface you use selected and none others.
"Go into System Preferences - Network - Advanced - Proxies Uncheck "Auto Proxy Discovery", click OK, Apply"
After Unchecking "Auto Proxy Discovery" I also had to Uncheck "Use Passive FTP Mode (PASV)" and then Restart Boot Camp Assistant.
odiggy's comment and tried restarting Boot Camp Assistant. That did the trick, even though the Auto Proxy Discovery checkbox ended up the same as it started. Windows support software is now downloading... if you're downloading to an external drive make sure there's a least 1 GB of free space because the WindowsSupport folder is around 700 MB and presumably will grow with time.
https://discussions.apple.com/thread/3223773?start=15
Also, Change Domain Name Servers to OpenDNS IP address servers - that should be at the router firewall rather than the OS but may be in both for some people. You may be using the defaults your ISP uses, save those if you want, and try these:
208.67.222.222
208.67.220.220
Make sure you are not using LittleSnitch or Symantec (probably other 3rd party firewall)

TS3648 Windows support software error, boot camp, MBP OS X 10.8.3

I get this same error, "The Windows support software could not be saved to the selected folder. An error occurred while saving the Windows support software", when running boot camp assistant on OS X 10.8.3, which is installed on my MBP from mid-2012, (which did not come with an installation disc). Do I even require the windows support software? If so, how do I install it then? Any help would be much appreciated.
Thanks in advance,
-Brendan

Welcome to the Apple Support Communities
Instead of getting the drivers from Boot Camp Assistant, download them from the Apple website > http://support.apple.com/kb/DL1638 You have the steps to burn the drivers onto a USB in that site.
You need the Windows support software to make Windows run properly and be able to use all the hardware of your Mac on Windows

Windows Support Software via Boot Camp: "keyagent failed to start"

I am installing Windows 64-bit on a Macbook Pro 13" via Boot Camp. In the Windows support software stage, I get a pop-up msg "Service 'KeyAgent' (KeyAgent) failed to start. Verify that you hae sufficient privileges to start system services. I do have sufficient privileges as I'm logged in as the admin. Does anyone know what this message means and what actions I should take next?

File a bug report with Apple.

Can't download windows support software with Boot Camp

I'm trying to install windows 7 on my MacBook Pro using Boot Camp, I start downloading windows support software but the download is very slow (compared to my usual download speed) and it seems it fall in loop, the downloading bar doesn't move... What can I do?

coglia wrote:
I'm trying to install windows 7 on my MacBook Pro using Boot Camp, I start downloading windows support software but the download is very slow (compared to my usual download speed) and it seems it fall in loop, the downloading bar doesn't move... What can I do?
Wait, it can take hours (as much as 4 hours has been reported, 1 is more common)

Downloading windows support software through boot camp

When i am in the boot camp assistant, it asks me to "download the windows support software for this Mac," however when I try to download it, i get a message that the windows software in not available. How do I make it avilable because I really need to split my hard drive.

When You Said "Don't know. Th RC was not a final version so who knows what was included within it. See the first item here http://support.apple.com/kb/HT1899." I Just Finised Uninstalling The RC 5 Minutes Ago

In boot camp assistance download the latest windows support from apple is taking too long

I am trying to download the latest windows support software from apple in Boot Camp Assistance and is taking for ever. Any suggestions?

In this threadhttps://discussions.apple.com/message/16605226#16605226there's a link to download the BootCamp 4.0 Driver package.

I installed windows 7 using Boot camp, Then i wanted to install the support software using boot camp and it always stops at 50% i tried installing the software using internet it always gives me error when i start installing it on windows, What to do?

I installed windows 7 using Boot camp, Then i wanted to install the support software using boot camp and it always stops at 50% i tried installing the software using internet it always gives me error when i start installing it on windows, What to do?

What is the error? Are you following the Bootcamp instructions? Where on the "internet" are you trying to install from? Did you try downloading from here http://www.apple.com/support/bootcamp/downloads/?

How can I uncheck the option to 'download latest windows support software' in the boot camp assistant? The option to uncheck is locked

MBP 2013 Retina running OSX 10.9.2
I am trying to install Boot Camp using Boot Camp Assistant 5.1.2 (481)
I have a Windows 7 Pro ISO from MS.
When I open the Boot Camp assistant and try to create a bootable USB, it freezes on the 'downloading windows support software' part. I have tried multiple times.
I was able to download the latest support software from Apple, but no matter what I try I am unable to uncheck the box to download the software in the boot camp assistant
Ideas?

Me too have the same problem where i couldnt uncheck the 'download windows support software' option when im installing Windows 8 Pro (ISO in bootable USB 3.0) using Boot Camp on my MBP retina OS X 10.9.2.
And if i have to follow these steps, it takes too much time and im not sure if it will be finished or not (im stopping the process for i have waiting for at least 3 hours downloading). And im pretty sure my internet connection is doing good when downloading this thing. What's happening here?
Please help.

Is there a command on Windows to install the latest version of software?

yum can install the latest version of software on Linux system, I am wondering whether there is a similar command on Windows platform?

Soon:
https://duckduckgo.com/?q=windows+10+package+management
Don't retire TechNet! -
(Don't give up yet - 13,225+ strong and growing)

Just installed the latest Canon printer software update (V 3.2) from the App store. Canon Pixma MX850 will not print. Dialog says job stopped at the server - no pages found. Utilities, print test page works. Printing via Airport.

Just installed the latest Canon printer software update (V 3.2) suggested by the App store in effort to get printer working after OS update. Canon Pixma MX850 will not print. Dialog says job stopped at the server - no pages found. Utilities, print test page works. Attempting to print via Airport from a MacBook Pro. Also from a Mac Pro via ethernet. Both worked before updating to Yosemite. Canon Pro 9000 Mk 2 works via USB. Tried installing driver 10.84 from OS 10.9 as suggested by PAHU; no luck.

The "stopped at server - no pages found" message would suggest an image with the print file that is created by the printer driver on the MacBook Pro. But if the Mac Pro is getting the same message then that is unusual.
To rule out a couple of causes I would try connecting the MacBook Pro directly to the MX850 by USB cable. This action should result in a new printer for the USB connection being created automatically. If not then you may need to manually create it as you won't be able to use the existing printer that exists for the network connection. With the new printer created see if this will let you print without error.
If this USB connected printer also fails with the same message then try a reset of the printing system. Note that this action will also remove the Pro 9000 from Printers & Scanners so you will have to add it and the MX850 again.

Do you install the latest windows support software in boot camp?

Similar Messages

Maybe you are looking for