Do you know how to record yourself doing something?
Hello, do you know how to record yourself doing something, like teaching a craft, or ranting about something so it can be uploaded to a video provider... from an iMac? Thanks if so!
<Re-Titled By Host>
Thank you, but I mean by video, like a full tutorial. Quicktime does an ok version, but blurs at high speeds, (like if you're jumping or boxing etc) so I'd like to know what good apps record a decent VIDEO (not photos) from the iMac camera. The camera can remain in one place, the instructor has a stable mark to work within so they don't go out of screen, but yes, fast movement just has tracers. It might have been the lower light though. Bright light would help this issue I bet...
I know from the plethora of well done youtube videos, it's possible. Just not sure what apps may be best.
Thanks again!
Similar Messages
-
Does anyone know how to record directly to a track using Logic's effects?
Hi there, does anyone know how to record directly to a track using Logic's effects? I know that it needs to run through a buss somehow but I am not quite sure how. Need to Di a bass and want to keep the levels down using a compressor (recording strait into a Mbox with Logic 8). Any help will be greatly appreciated. Thanks.
If you route your Bass into a channel in Logic and put plugins/fx on the channel plus you have monitoring on (and monitoring off on your external mixer) - you can record while listening to the effected sound. However what is being recorded is the clean/raw audio - this is a good thing as you can later change your compression/fx settings - printing the effect at this early stage is normally avoided.
Ian -
does any one know how to connect itunes up? when i click on store it always says 'itunes could not connect to the store. Make sure your network connection is active and try again.' if you know how to fix tell me please, please! thanx
Work through all the troubleshooting here: iTunes: Advanced iTunes Store troubleshooting
B-rock -
You know how you download apps, well let's say you have two devices and get an app on one and it goes to the other, how do you remove it from doing that?
Click here and use the instructions to turn off the automatic downloads.
(120206) -
Hey Guys, does any of you know how to change the Click sound?
I was wondering if any of you know how to make the cursor say that pop sound when you click anything
Like the Windows annoyance that makes a mouse click sound long after you actually clicked the mouse?
If you really want to do that here is an app for you: Did I Click
There may be others. -
MY mac mini hard drive is failing. I am no longer under warranty. Do you know how much it cost to have Apple replace the hard drive? or How I can replace it myself?
You can do it yourself. I did on my 2009 Mini
http://www.ifixit.com/Device/Mac_Mini
Also, this place sells HSDs and has install videos.
http://eshop.macsales.com/installvideos/ -
Hi, I have photoshop CC. It's the french version but I would like to have it in english. I went in the creative cloud to change the language but it doesn't seem to work. Do you know how i could do it ?
Please indicate whether or not the following link helps... I have not had to use it and so I do not know if/when it does help.
Creative Cloud Help / Adjust the install language | Creative Cloud applications | CCM -
http://helpx.adobe.com/creative-cloud/kb/change-installed-language.html -
Do you know how to use Flash? can you help?
hi all,
Do you know how to use Flash?
I have been trying for months to find someone who can use
flash, who can help me, with no luck.
I need my links on my website updating, just a couple of them
need the text changing as i need
to change the name/title of some pages. I have tried to do it
myself (using a trial version of flash,
as i dont have flash). the site was made using dreamweaver.
the files are .FLA
and before anyone says 'get the person who made the site to
do it'....He wont, ive tried.
when i tried to change them myself i cocked them up and now
they dont work at all, see my
website and you will see; www.stevenallenphotography.co.uk
so, if you can use flash please can you help me? all i need
doing is the file updating with some
of the link titles/names changing, i.e. one link is
'exhibitions' which needs changing to 'published work',
please get in touch if you can help.
thanks,
steven.I used divx in my site once its really very nice! but i use it in different host not .mac...try this divx web player with video selector code --------<object id="ie_plugin" classid="clsid:67DABFBF-D0AB-41fa-9C46-CC0F21721616"
width="640" height="480"
codebase="http://go.divx.com/plugin/DivXBrowserPlugin.cab">
<embed id="np_plugin" type="video/divx"
width="640" height="480"
pluginspage="http://go.divx.com/plugin/download/">
</embed>
</object>
<script type="text/javascript">
// This code detects which browser we are
// running into (IE or others) and assigns
// the correct element (object or embed) to
// the "plugin" variable, that we will use.
var plugin;
if(navigator.userAgent.indexOf('MSIE') != -1)
plugin = document.getElementById('ie_plugin');
else
plugin = document.getElementById('np_plugin');
// This is a local JS function used by our form
// element to call the plugin functions using
// the "plugin" variable that we defined above
function openNewMovie()
var url = document.forms['videoSelector'].movie.value;
if(url != '')
plugin.Open(url);
</script><form name="videoSelector">
Choose a video to play:
<select name="movie" onChange="javascript:openNewMovie();">
<option value="" selected>Video Selector
<option value="http://www.yourdomain.com/folderdivx/name.divx">title1 divx
<option value="http://www.yourdomain.com/folderdivx/name.divx">title2 divx
</select>
</form> ---------------------
Hope this help! -
How to know how many records is returned by the query in report
Hi
i want to know how many records has been returned by a sql statement in a report.
can any one help me to solve this problem.
santosh.you need to create a summary column with count function for a column in your select query. then u can print that formula column to know the no of rows selected in a query for a report
-
I cannot get the keyboard to come up on the ipad mini when in the citrix receiver. Has anyone ran into this and do you know how to fix it?
I am not familiar with Citrix Reciever but is it possible it is open or being used in another open app?
Try quitting all apps then try again.
Quit all apps: Double tap the Home button and swipe the app preview page up for each open app -
Hi, do you know how can I upload inelegible songs from itunes to Icloud. They are songs added from original CDs. Another question would be how can I transfer all the music I have in my Ipod Classic to my Itunes or ICloud as I want to back it up.
Depends on why it's ineligible. If it's under 96 Kpbs, try right-clicking on the file and choosing Create AAC Version. (If you don't see this option, go to iTunes>Preferences, click "Import Settings..." then choose "Import Using: AAC Encoder" and "Setting: iTunes Plus".) Then rescan your library to see if this version will add to iTunes Match. Or, after changing your import setting, just re-import the song to your iTunes library.
If the song is over 200 MB you would have to reduce it's size to make it eligible. -
Dear Apple,
I use the same Apple ID on my iPad mini and my iPhone 5. My iPhone 5 was stolen on may 12, 2013. Do you know how to get it back?Click here for information.
(83340) -
I am trying to change my credit card details on Itunes as I have moved to NZ and closed down the credit card in Australia. There is $5 left to pay on the card. It will not let me update my address to NZ or put in my new credit card details. HELP!!!!!
It says I have to provide a credit card in the Australia before I can clear my $5 credit card debt and I have now cancelled my card in Australia and don't have another one!
Do you know how I can change my address to NZ and then change my billing to my new credit card in NZ and pay the $5 bill.
Do I have to shut down my account or reapply to Itunes with a new email address and leave this bill outstanding!! Seems crazy........but cant seem to see any other way around it!Click here and request assistance.
(87754) -
All of my titles, themes and generators seem to be completely missing from Final cut pro x. Do you know how to get them back?
Do you mean that when you click the title browser, for example, nothing is there?
Do you at least see several categories listed in the effects browser?
First make sure that you have nothing typed into the search box (not even spaces).
If you still see nothing, try this in order:
1) Window->Revert to Original Layout
2) Quit FCP X, delete preferences using Preference Manager (a free download from Digital Rebellion)
3) Download FCS Remover, and use it to completely remove FCP X. This will NOT delete your content, just the application.
4) Reinstall FCP X from the Mac App Store: log in with the same Apple ID that you used to buy FCP X, click on "Purchases", locate FCP X and click Install. -
You Are Rad If You Know How To Do This...
Hello My Fellow Flashophiles
So, I will bow down to you if you know how to help me with
this one.
I have a MovieClip in my Flash file which emulates a
signature being drawn by animating a mask that covers over a bit
more of the underlying bitmap (of the actual, static signature)
frame by frame. I'm interested in allowing the color of the static
signature in the bitmap to be set dynamically. Here's the
pseudocode I've come up with so far:
- Access the bitmap in the MovieClip
- Replace (somehow) every black pixel in the bitmap (the
signature is black, the background white) with a pixel that is the
chosen color
- addChild the MovieClip to the main timeline
I am also considering separating the bitmap from the
MovieClip and just setting the MovieClip as its mask
dynamically....
Any ideas on any part of this? You're rad!
Thanks,
GrahamOh! Cbeech is the winner once again... I'm really starting to
owe you, friend. Thanks once again for your invaluable help...
So, yes, I decided it would be best to strip the bitmap out
of the mc. Instead, I load it programmatically, apply the threshold
method (I
knew there had to be such a function! -- thanks, Beech!),
then set the animation as the mask programmatically. Note to
Cbeech: the colors for both the bground and the signature are
selected via the sampling method you helped me with before.
Here's the outcome:
http://www.catherinemix.com/cmix8.html
A lot of work for modest results, but I suppose that's the
name of the game. I'm not complaining, tho. My understanding grows
geometrically, and it's fun!
Be Well,
Graham
Maybe you are looking for
-
Photostream no longer syncs to PC
My photo stream no longer uploads photos to my PC, I've tried re-installing. It used to be fine until an update about a year ago.
-
I tried to log in to I tunes it said your apple ID has been disabled?
ITunes message Your Apple ID has been disabled. How do I fix that?
-
Lion update made my wireless lose connection
I have recently updated my Imac Desktop from snow leapord to the new lion... my wireless internet worked great on snow leapord, but since the update my computer looses connection to the wireless, works for five more minutes then disconnects for ten m
-
How to mimick the default export behaviour to Excel in code?
I have a report with headers and datacolumns. The problem is that the code below leads to misaligned columnheaders and datacolumns: CRReport.ExportOptions.FormatType = crEFTExcel97 CRReport.ExportOptions.DestinationType = crEDTDiskFile
-
Why is airplay upload usage so high? (using wireless speaker)
I have a iHome wireless speaker that I play using iTunes Airplay. It works fine but the upload usage is through the roof compared to the download usage (e.g. upload = 128KB/s, download = 7KB/s) - this seems strange, thought it should be the other way