Do you know if it's possible on an iPad to set the image quality/size or do we just have the one size - the photos I've taken work out at approx 8 x 6cm @300ppi - not that big!
Do you know if it's possible on an iPad to set the image quality/size or do we just have the one size - the photos I've taken, work out at approx 8 x 6cm @300ppi - not that big!
8cm * (1 in/2.54cm) * 300 dpi = 944 pixels (should be 1280 if this is the back camera)
6cm * (1in/2.54cm) * 300 dpi = 708 pixels (should be 720 if this is the back camera)
The back camera on iPad 2 is 1280x720 = 0.92Mp. No way to increase that.
Similar Messages
-
I have two iphones one older iphone4 and one newer iphone5. I want to set the iphone4 as an Airplay receiver and the other iphone 5 as the sender. do you know if this is possible?
Sorry. Apple's policy states that accounts cannot be merged > Frequently asked questions about Apple ID
Contact Apple for assistance > Contacting Apple for support and service -
Do you know if it's possible to generate Word 2003 files from
RoboHelp if we're using Office 2007 and RoboHelp 2007? We are
thinking of upgrading, but have customers that would still require
Word 2003 formats because they won't have 2007 installed.
Thanks!Hi NewtoRobohelp
Unfortunately I don't have Office 2007 in front of me to test
with. But I'm thinking that as long as Office 2007 still produces
the same formats as 2003, you could do it this way.
From RoboHelp 7 and using Office 2007, generate Printed
ouptut. Open said printed output in Office 2007 and perform a Save
As. Save the document as a RTF (Rich Text Format) document.
RTF is more universal. So I'm thinking this may be a possible
way around it. There is also the possibility that Word 2007 offers
up an ability when saving a file to save in an older format.
Cheers... Rick -
I need help proving the date tag on a photo stored in my iPhoto is from the date it was sent to my iphone/date it was imported into iphoto - and that it is NOT the date the photo was actually taken. I recieved a photo via text on my iphone and then I synced my iphone to my macbook and now it is in iphoto. I already know that the date on the photo per the tag that shows up on it in iphoto is NOT the date the photo was actually taken. I need article or literature or something confirming the tag is from when it was sent to the iphone and/or when it was imported. I greatly appreciate some assistance!
All I am trying to do is find something on a forum board or article etc stating that the the date showing in iphoto could be the date it was imported or synced or sent to me and not the actual date taken.
The date on the photo could be anything because you can edit the date with iPhoto or any of 100 apps, free and paid for. So, the date on the photo will prove nothing, I'm afraid.
Regards
TD -
I cannot close or import or any function to iphoto. I have been getting the same message for many days "Photos are being imported to the photo library. Please wait for import to complete." I do not know where the photos would be importing from. How do I get it to proceed?
After Force Quitting, as LarryHN recommended,
Select the iPhoto Library in the Finder. By default it is in your Pictures folder.
Ctrl-click or right-click the iPhoto lIbrary. Select "Show package contents" from the panel, that will pop up.
Look for a folder named "Importing" or "Import". Remove this folder, but don't touch anything else.
Then launch iPhoto again.
If iPhoto now is working again, check the folder you removed, if there are any photos that you want to keep and save them. -
My iPod iTunes thing is be a pain in the you know what and won't let download anything cause my account verified thing keeps popping up and I put my security code in but it won't work and I have my iTunes redeem card and it wo t let me use it.please help
Maybe heresince yu proviced little informatin about what security code yu are talking about.
iTunes Store: My credit card's security code or zip code does not match my bank's records
Contact iTunes:
Apple - Support - iTunes - Contact Us -
Hey guys, i have a one year old Mac desktop which has become incredibly slow over time. Strange thing is that I have not downloaded anything save for install Windows for Mac. Storage wise the bulk of my info is stored on hard external drives. Can someow
Hardware Information:
iMac - model: iMac11,2
1 3.2 GHz Intel Core i3 CPU: 2 cores
4 GB RAM
Video Information:
ATI Radeon HD 5670 - VRAM: 512 MB
System Software:
Mac OS X 10.6.8 (10K549) - Uptime: up 0:2:53:43
Disk Information:
WDC WD1001FALS-40Y6A0 disk0 : (931,51 GB)
(null) (disk0s1) <not mounted>: 200 MB
Macintosh HD (disk0s2) /: 931,19 GB (894,98 GB free)
OPTIARC DVD RW AD-5680H
USB Information:
Apple Inc. iPad
Apple Internal Memory Card Reader
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple, Inc. Keyboard Hub
Apple, Inc Apple Keyboard
Apple Computer, Inc. IR Receiver
Apple Inc. Built-in iSight
FireWire Information:
Kernel Extensions:
Problem System Launch Daemons:
[failed] com.apple.suhelperd.plist
[not loaded] org.samba.winbindd.plist
Problem System Launch Agents:
[failed] com.apple.Kerberos.renew.plist
Launch Daemons:
[loaded] com.adobe.fpsaud.plist
[loaded] com.microsoft.office.licensing.helper.plist
[loaded] com.rim.BBDaemon.plist
[loaded] com.zeobit.MacKeeper.AntiVirus.plist
Launch Agents:
[loaded] com.rim.BBAlbumArtCacher.plist
[loaded] com.rim.BBLaunchAgent.plist
User Launch Agents:
[loaded] com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae.plist
[loaded] com.zeobit.MacKeeper.Helper.plist
User Login Items:
iTunesHelper
BlackBerry Desktop Software
Bluetooth File Exchange
Garmin ANT Agent
Dropbox
3rd Party Preference Panes:
Flash Player
Internet Plug-ins:
AdobePDFViewer.plugin
AdobePDFViewerNPAPI.plugin
Flash Player.plugin
FlashPlayer-10.6.plugin
GarminGpsControl.plugin
iPhotoPhotocast.plugin
JavaAppletPlugin.plugin
QuickTime Plugin.plugin
SharePointBrowserPlugin.plugin
User Internet Plug-ins:
Bad Fonts:
None
Top Processes by CPU:
Top Processes by Memory: -
I am using both PSE 13 and Lightroom 5. When I use Lightroom as an external editor and save the photo, it shows up in PSE13 as an edited file but does not look any different. Why doesn't it appear edited?
People who have Photoshop, but don't have Lightroom, need ACR so that they can use Raw files. Without ACR they could do nothing with those (they may also like having ACR so that they can work on other kinds of image using the same kinds of adjustments and techniques, as are used with Raw files).
People who have Lightroom, can get access to Raw files regardless whether ACR is present or not. They can use Lightroom on other kinds of image also, using the same methods. LR can pass images directly into Photoshop without passing via ACR (or else does so transparently, which amounts to substantially the same thing).
ACR does not, strictly speaking, even need to be installed for this external editing to happen. In fact, not even PS needs to be - since a different image editor can be used instead, while still retaining the Adobe Raw conversion etc.
Lightroom "subcontracts out" specialised external tasks, in this workflow, but is still your "main contractor": the image is otherwise located, viewed, managed, adjusted/presented and output entirely using LR.
So IMO we can divide image processing into:
operations that involve pixels and layers and layer masks and adjustment layers etc (of the kind done inside Photoshop)
operations that involve parametric edits (of the kind done in ACR where you are not using a Lightroom based workflow; otherwise, done inside Lightroom)
When PS is called in, that's because those tasks are impossible or unsuitable to do in Lightroom. But those tasks can't be done in ACR either - by definition, since LR and ACR have exactly the same image processing "feature set".
Lightroom is irrelevant to the Bridge + ACR + PS workflow. This workflow requires both your PS and your ACR to be current enough, to support your Raw format etc.
ACR and Bridge are irrelevant to the LR + (image editor) workflow. It is in this case, only LR which needs to be current enough to support your Raw format etc.
RP -
Hi I have a Konica Minolta PagePro 1300W printer. This works with my Windows-based Toshiba laptop but not with my i-Mac. I have the latest (Mountain Lion 10.8.2) OS-X software.
I have installed the printer using 'System Preferences' on my i-Mac and it appears on the list of available printers but documents that I create just don't print.
Can someone please advise me how I get the Konica Minolta PagePro 1300W printer to work with my i-Mac?
Thanks, John LeeLooking at the Konica web site for the PagePro 1300W, I saw the following note.
Please note: This printer is designed to be used in computer operating systems running MS Windows only. Operating systems such as UNIX, Macintosh, or Linux are not supported nor do we have workaround drivers available. Older MS Windows versions, such as Windows 3.1/95/98[pre-SE] and NT 3.51/4.0, are not supported.
So KM are not going to help you. But the LinuxFoundation does provide a workaround that should allow you to print. Have a look at this web page. You will need to install all three packages as per the instructions from that page. -
I have just received a new iphone 5s and need to set the Apple ID with my work email. I used my work email on my personal iphone 4s to set up an icloud account and it will not let me use this email as the Apple ID on my new iphone. As it is a work phone I need to use this email address as my Apple ID. How do I do this?
when you open the app store scroll down to the bottom it will display the apple id currently in use, change it to your normal apple id email
-
How do I save an image after I have zoomed in on it? I can't work out why I can't save a zoom-in the same way
I can save a cropped image or an adjusted image. Thanks, Lily A.Hi Matt, thanks for your reply. Have realised that Zoom in Iphoto is just a viewing tool and not an editing tool.
Was creating beautiful abstractions by zooming in and wanted to create a new image of the result. Have since discovered that cropping after zooming takes me a little way to where I want to go but it isn't the same effect. Will perhaps have to try to create it when actually shooting. Am doing a photoshop course in February and maybe will learn a bit more then, too. Am pretty much an amateur just finding my way.
Thanks again,
Best, Lily -
I have an account in Adobe, but every time I work out on any product from Adobe products
The program tells me I Trail You remove and re-install the program, but problem persistsHi mahmod alsousi,
Try this:
Sign out from the Creative Cloud app and Quit it (Quit option will be available after a few seconds).
Now move the following folders to desktop:
1) SLCache
Windows: OS Drive\Program Files (x86)\Common Files\Adobe
Mac: Library/Application Support/Adobe
2) SLStore
Windows: OS drive\ProgramData\Adobe
Mac: Library/Application Support/Adobe
3) OOBE
Windows: OS Drive\Users\<username>\AppData\Local\Adobe
Mac: /User/Library/Application Support/Adobe
Now launch Premiere Pro and sign in with your Adobe ID.
NOTE: Make sure your Anti Virus/Firewall is not blocking any Adobe activation servers. Alternately, you can also check your 'hosts' file for any changes.
Thanks,
Rameez -
When I am first looking at my newly uploaded photos in "Library," a box appears near the bottom of the photo that says "Loading". While it is loading, I usually think the photo looks "good". After the photo is done loading, it looks more washed out. Is there some sort of setting that I might have on (or that I need to turn on) so that this does not happen. I have Lr4. Thanks.
Hi Tracy,
There used to be a way to see if poster was new to the forum.., anyway - welcome to the forum.
As I was alluding to, biggest differences in initial display are due to:
* Camera calibration profile.
* Auto-exposure/contrast settings (for which compensations have been auto-applied in camera, but not in Lightroom).
So, choose a matching camera calibration profile (whether that's an option or not depends on your camera model - they're available for many but not all models) if you prefer one of them over "Adobe Standard" (the factory default profile).
Also, your camera covers for underexposure due to non-optimal auto-exposure/contrast setting, Lightroom doesn't, so your options are:
* turn it off in camera.
* learn to compensate manually (or automatically via a plugin) in Lightroom.
Of course, in addition to preferred defaults (alt-click big "reset" button in dev module), come up with some presets which are appropriate for your druthers and type of photography.. e.g. these will compensate Nikon ADL settings:
http://www.robcole.com/LrForumSupport/ADL%20Compensations%20%282012%29.zip
Cheers,
Rob -
My I-phone 4 froze when I was trying to sync some music to it tonight from i-tunes. I lost all my contact info, apps and most importantly photos. I had just returned from a vacation to the mountains and had 200 or so photos that are now lost I really would like to know if there is any way to retrieve them because I hadn`t uploaded them to my computer yet. I don`t mind if I have to pay a professional to retrieve them I just want to know if its possible. If anyone has any advice I would greatly appreciate it! Thanks for listening and any help anyone might have.
If the photos were not backed up with a recent backup, there is NO way to retrieve them.
-
I need to know if I buy an iPhone 5 or 5c in the US whether it will work in the UK with a PAYG sim
I am currently living in the USA but will be moving back to the UK next year. I am not familiar with US phones or network providers. I have done a little research re CDMA / GSM / frequencies etc but am just confused!!!
I would like to buy my daughter an iPhone but would like her to be able to use it when we visit the UK on vacation or when we move back. Ideally I do not want to be tied to a contract here and would prefer PAYG but if thats not an option would possibly consider it.
Is this going to be possible?
If so What do I need to be looking out for?
In the UK it is quite simple...I would just buy an unlocked phone or have one of the UK carriers unlock it for me and then just use overseas with a PAYG sim but are the phones here sim free?
Please help.
Many thanks
JoThe answer is complicated. None of the major carriers offer PAYG service in the US, but if you buy a contract-free phone for full price you can get a plan that can be canceled at any time from any of the major carriers (AT&T, Verizon, Sprint and T-Mobile). There are smaller resellers that offer PAYG service (StraightTalk, for example), but they are hard to deal with.
The most liberal is the GSM carrier T-Mobile. They have "unbundled" the phone from the service, so if you bring your own phone or pay full price for a phone the monthly cost will be lower.
The other 3 will charge you the same monthly cost whether you pay full price for the phone or get a subsidized phone.
Verizon iPhone 5 series phones are unlocked out of the box for international use (thanks to a condition the FCC imposed on Verizon when they were allowed to buy a substantial chunk of spectrum). They are the only phones sold in the US that will work on LTE bands in the UK and Europe.
Sprint is not a good choice, because they give you a hard time if you want to unlock your phone.
AT&T phones are locked, but they will unlock the phone if you pay full price or pay off your early termination fee. However, they will only work on GSM in the UK, not on LTE (4G).
Maybe you are looking for
-
Printing broken for HP LJ1150 over Lan
All of sudden today I cannot print to my LaserJet 1150, although all other Win boxes can. The printer is connected via USB to a MacMini and shared over Lan. It's rather embarrassing. When I attempt to print from say Safari, I get a dialog that says "
-
Creating a DRAFT Watermark in Pages '09
Hi: I am attempting to find out how to place a washed-out "DRAFT" in grey text diagonally across my document (as a watermark), but I can't seem to figure it out. Could someone please walk me through this? I wish it was as easy as MS Word. Thank you!
-
Re: No display, MSI Z97 PC Mate (New Build)
from the lower screen shot it looks like the drive is empty! how have you formatted the disk and what format did you chose? is it in a USB 2.0 slot?
-
ORA-00907: missing right parenthesis
hi, my requirement is creating xml using dynamic sql .but i got this error please help me. declare l_query varchar2(2000); output clob; begin l_query:='select dbms_xmlgen.getxml('' select empno,to_char(sal,''99,999.99'') salary from emp '') loandetl
-
Persistence and hibernate (and maybe XFire)
Sorry didnt know in which forum to post this. I have a very weird problem. We are using Springframework with XFire and Hibernate. All Database rows are implemented as Persistence Objects for Hibernate. So far it works well. We transfer this persisten