Do you know if Oracle Directory Server Enterprise Edition (11.1.1.7.0) runs fine with JDK 1.7?
I work in HSGBU and i'm looking to install both ODSEE and Cognos 10 on the same server. Cognos requires JDK 1.7 and in order to enable Cognos Software to find the necessary Java components when it runs, one must set the JAVA_HOME to 1.7
Hello,
Yes, it does.
Note that the ODSEE directory server does not depends on Java, but the Admin Console (DSCC) does.
-Sylvain
Please mark the response as correct or helpful when appropriate to make it easier for others to find it
Similar Messages
-
Oracle Directory Server Enterprise Edition is free?
As we known that Sun Directory Server Enterprise Edition was available free of charge for perpetual usage in individual, commercial, service provider, or research and instructional environments, but Oracle Directory Server Enterprise Edition is still free?
No, Oracle Directory Server Enterprise Edition comes with a different pricing mechanisms called "Oracle Directory Services Plus":
https://shop.oracle.com/pls/ostore/product?p1=OracleDirectoryServicesPlus&p2=&p3=&p4=&sc=ocom_IdentityManagement_OracleDirectoryServicesPlus&tz=-7:00
HTH,
Marco -
Oracle Directory Server Enterprise Edition/Sun DSEE oim11g r2 connector
Hi,
is there any OOTB oim 11g r2 connector available for Oracle Directory Server Enterprise Edition/Sun DSEEYes. The standard LDAP OIM ICF connector fully support ODSEE.
-
Directory server enterprise edition 6.3 required packages
Trying to install Directory server enterprise edition 6.3 however there are some pre-requisites required
Solaris10 Sparc(64)
SUNWxcu4
SUNWjdmk-runtime
SUNWjdmk-runtime-jmx
SUNWmfwk-rt
SUNWldapcsdk-lib
SUNWsasl
Once upon a time was able to search for a package and get the latest or slightly older versions.
Any ideas where I can locate these packages to install individually. Don't want to use a patch to add these packages.I have had the same error when running comm-dssetup occur if the directory server isn't running.
-
Directory Server Enterprise Edition 7.0 Installation Problem
Hi Team,
While I am trying to install Directory Server 7.0 in windows 2003 server machine ,the following problems are occured.
D:\Sun7.0\sun-dsee7\dsee7\bin>dsccsetup.exe status
DSCC Agent is not registered in Cacao
DSCC Registry has been created
Path of DSCC registry is D:/Sun7.0/sun-dsee7/dsee7/var/dcc/ads
Port of DSCC registry is 3998
I was able to create DSCC registry successfully.But while registerng DSCC agent in Cacao some probelm occurs
I ran dsccsetup.exe cacao-reg command.But its throwing
Configuring Cacao...
## Failed to run D:/Sun7.0/sun-dsee7/dsee7/ext/cacao_2/configure.bat
#### D:\Sun7.0\sun-dsee7\dsee7\bin>"D:\Sun7.0\sun-dsee7\dsee7\ext\cacao_2\lib\pr
ivate\perl\bin\perl" -I "D:\Sun7.0\sun-dsee7\dsee7\ext\cacao_2\lib\private\perl\
site\lib" "D:\Sun7.0\sun-dsee7\dsee7\ext\cacao_2\configure.pl"
## Exit code is -1073741819
Failed to configure Cacao.
Please any one help me.....
Let me know if any details you needNow its working fine. Actually problem is my machine physical memory size is 1 GB RAM.After i test with 4 GB RAM machine DSCC Agent is created on Cacao Successfully.
-Selvaraj -
DSCC problem on Directory Server enterprise edition Version 11.1.1.7.0
I install ldap version Version 11.1.1.7.0 on redhat 5.6 on /opt/dsee7
I excute:
I have export JAVA_HOME=/opt/dsee7/jre and PATH=$JAVA_HOME/bin:/opt/dsee7/bin:/opt/dsee7/dsrk/bin:$PATH
*[root@sperem ~]# java -version*
java version "1.7.0_10"
Java(TM) SE Runtime Environment (build 1.7.0_10-b18)
Java HotSpot(TM) Server VM (build 23.6-b04, mixed mode)
*[root@sperem ~]# which java*
*/opt/dsee7/jre/bin/java*
*[root@sperem ~]# dsccsetup ads-create*
*[root@sperem ~]# dsccsetup war-file-create*
*[root@sperem ~]# dsccagent create*
*[root@sperem ~]# dsccreg add-agent /opt/dsee7/var/dcc/agent/*
*[root@sperem ~]# dsccagent start*
I deploy the dscc7.war on glassfish.
asadmin deploy /opt/dsee7/var/dscc7.war
All work correctly.
I have create one ldap istanza and i have register to dscc console with commands
*[root@sperem lib]# dsadm create -p 389 -P 636 /opt/dsee7/var/utenti*
Choose the Directory Manager password:
Confirm the Directory Manager password:
Use command 'dsadm start '/opt/dsee7/var/utenti'' to start the instance
*[root@sperem lib]# dsadm start /opt/dsee7/var/utenti*
Directory Server instance '/opt/dsee7/var/utenti' started: pid=9762
*[root@sperem lib]# dsccreg add-server /opt/dsee7/var/utenti/*
Enter DSCC administrator's password:
*/opt/dsee7/var/utenti/ is an instance of DS*
Agent No Hostname Port Owner iPath
*0 sperem.gromanenghi.net 3997 root /opt/dsee7/var/dcc/agent/*
The registration will use DSCC agent on port: 3997
Enter password of "cn=Directory Manager" for /opt/dsee7/var/utenti/:
This operation will restart /opt/dsee7/var/utenti/.
Do you want to continue ? (y/n) y
Connecting to /opt/dsee7/var/utenti (using ldap://127.0.0.1:389)
Enabling DSCC access to /opt/dsee7/var/utenti
Restarting /opt/dsee7/var/utenti
Registering /opt/dsee7/var/utenti in DSCC on localhost.
The problem is:
When i use the dscc web console i can't administer my ldap because i receive the message:
Inaccessible (to enable access click on the server and then on ‘Enable Access’)
*[root@sperem lib]# ps -ef | grep dscc*
root 5452 1 0 09:39 ? 00:00:03 /opt/dsee7/jre/bin/java -Dsun.directory.clip.arg0=/opt/dsee7/lib/dsccagentdaemon -classpath /opt/dsee7/lib/jar/utils.jar:/opt/dsee7/lib/jar/dsccagentdaemon.jar:/opt/dsee7/lib/jar/dcc.jar:/opt/dsee7/lib/jar/ground.jar:/opt/dsee7/lib/jar/clip.jar:/opt/dsee7/lib/jar/common.jar:/opt/dsee7/lib/private/jdmkrt.jar:/opt/dsee7/lib/private/jmxremote_optional.jar -Ddirectory.utils.lib.path=/opt/dsee7/lib/libjutils.so oracle.ldap.dsee.dscc.agent.DsccAgentMain start /opt/dsee7/var/dcc/agent
I try to create one new ldap istance from web dscc but i have the same problem. I try to register the ldap instance directly from dscc but i have the same problem
With other ldap version I don't have problem.
TIA
Giovanni
P.S. Excuse me for my english.We have found DSCC in 11.1.1.7.0 is much more sensitive to SSL cert issues. Make sure your Directory Server SSL certificates are set up correctly and then remove from DSCC and add again. Then click the "refresh" button in DSCC. You may also want to double-check your dsccagent installation and make sure it is properly registered.
-
Directory Server Enterprise Edition 6.3
Hi all ,
i have downloaded the gz version of directory server 6.3 from the sun site & communication suite 6,
well i install the directory server 6.3 and install the directory creation utility from the comm suite 6.
but i am unbale to find that from where i will get the access manager , and i am also unable to create the directory (server-schema) i.e by using the comm_dssetup.pl
it fails and give me the following error,
Directory server does not appear to be running or not listening to port 389.
Bad DS version (0,0) Please correct the problem and re-run this script. at ./comm_dssetup.pl line 1014.
Regards
Adeelsimply looks like the comms installer is busted with DS ZIP distro. I'll get to them.
Thanks for the notification. -
How to get account expiry date for Oracle Directory Server?
I need to get the account expiry date for Oracle Directory server. Which attribute stores this value? Please let me also know the attribute type and how to fetch it.
Thanks,
SubratHello,
Yes you can use nsAccountLock directly (When nsAccountLock=true, the object is inactivated and the user cannot log in)
This is documented in Modifying Directory Server’s NsAccountLockAttribute Directly (Sun Java System Directory Server Enterprise Edition 6.2 In… (release number is old but it does not matter, Thats the first one Ive found)
You can also use dsutil account-inactivate as described in dsutil - 11g Release 1 (11.1.1.7.0)
Sylvain
Please mark this response as correct or helpful when appropriate to make it easier for others to find it -
Oracle Business intelligence Suite Ent. Edn and Server enterprise edition
Hi
I would like to know difference between Oracle Business Intelligence Suite Enterprise Edition Plus and Oracle Business Intelligence server Enterprise Edition.Hi,
Oracle Business Intelligence Suite Enterprise Edition Plus is a comprehensive suite of enterprise business intelligence (BI) products
that delivers a full range of capabilities—including interactive dashboards, full ad hoc queries, proactive intelligence and alerts,
enterprise and financial reporting, real-time predictive intelligence,disconnected analytics, and more.
The suite is composed of the below components
Oracle Business Intelligence Interactive Dashboards.
Oracle Business Intelligence Answers.
Oracle Business Intelligence Publisher.
Oracle Delivers.
Oracle Business Intelligence Plug-in for Microsoft Office.
Oracle Disconnected Analytics.
Oracle Business Intelligence Server Enterprise Edition. As the foundation of Oracle Business Intelligence Suite Enterprise Edition Plus, the Oracle
Business Intelligence Server Enterprise Edition generates queries optimized for each datasource, appropriately aggregates them, and presents the results to
users within a familiar Web browser via easy-to-use dashboards and reports.
The Oracle Business Intelligence Server Enterprise Edition also includes parallel query execution engines, memory management, and high-throughput
data connectivity adapters to allow highly efficient data sourcing and aggregation that minimize data retrieval time. This highly scalable platform
with clustering and caching capabilities is the heart of what drives the other suite components. Multiple servers can be clustered to provide session
replication and automatic failover capabilities. The Oracle Business Intelligence Server Enterprise Edition delivers mission-critical performance,
scalability, and reliability.
Cheers,
Aravind -
Do you know why oracle queries many times sys.props$ for BACK_END_DB
I noticed that oracle executes the following query too many times.
select p.value$, lengthb(p.value$)
from
sys.props$ p where p.name = 'BACK_END_DB'
Oracle 9i DB
This query is not executed into a form, report, package or procedure.
Question is:
Do you know why oracle queries many times sys.props$ for BACK_END_DB?
or how can we avoid it?
Regards
Marcos GaleanaHi,
Internal table sys.props$ contains data for some oracle parameter/variables. Oracle makes internal calls to its internal tables for many fornt end SQL statements (recursive queries). So do not worry about those internals calls.
Regards -
Disable Schema check in Oracle Directory Server
How does one disable schema checking in Oracle Directory Server. I couldnt figure it out. This is easily done in openLDAP , netscape LDAP server.
nullI am sorry if I wasn't clear. In Netscape/openLDAP , the term schemacheck implies. ( from open LDAP documentation ).
Option : schemacheck { on | off }
This option turns schema checking on or off. If schema checking is on, entries added or modified will be checked to ensure they obey the schema rules implied by their object class(es) as defined by the corresponding objectclass option(s). If schema checking is off this check is not done.
Default: on
The default is on in Oracle.
Thanks in advance ,
Ravi
null -
Struts & Sun ONE Web Server Enterprise Edition 6.1
Is there a web page that explains how to install struts and Tiles so that all web pages on the server use the information. I am trying to install on Sun ONE Web Server Enterprise Edition 6.1.
I would like to do a company web site with one location for layouts, images, etc and then all later installed web applications can use this information.Hi,
Its wise to use Oracle THIN client, unless you will need any OCI specific features.
Oracle OCI driver requires that your client must have a Oracle Client installation to connect using OCI, but the thin driver only requires classes12.jar in the client host to connect.
You can browse thru the Oracle JDBC Developers guide for more info.
http://download-west.oracle.com/docs/cd/B10501_01/java.920/a96654/toc.htm
Elango. -
Application Server Enterprise Edition 8.1 2005Q1
Hi,
Has anyone successfully install Application Server Enterprise Edition 8.1 2005Q1 on HP-UX. I did a normal install with the below path set:
Application Server [u02/sjs/SUNWapp]
Data & Server Configuration: [u02/sjs/SUNWapp/appserver]
When the installation bar hits 100% the installation reported to have failed. Following is the error reported:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please wait while the installer upgrades and installs shared components...
Java Enterprise System
|-1%--------------25%-----------------50%-----------------75%--------------100%|
Installation Failed
No software was installed.
You can refer to the Troubleshooting chapter of the Java Enterprise System
Installation Guide to resolve the installation issues.
Enter 1 to view installation summary and Enter 2 to view installation logs
[1] {"!" exits} 1
Installation Summary Report
Install Summary
Java Enterprise System : Installation Failed
Sun Java(TM) System Application Server Enterprise Edition 8.1 2005Q1 : Installed
Configuration Data
Sun Java(TM) System Application Server Enterprise Edition 8.1 2005Q1 :
Domains and Instance Configuration Directory : /u02/sjs/SUNWapp/appserver
Application Server Installation Directory : /u02/sjs/SUNWapp
Enter 1 to view installation summary and Enter 2 to view installation logs
[1] {"!" exits} 2
Installation Log
Installing Java Enterprise System
Log file: /var/tmp/Java_Enterprise_System_install.B08120926
Installed:
/var/sadm/prod/entsys/uninstall_Sun_Java_tm__Enterprise_System_2005Q1.class
Uninstaller is at:
/var/sadm/prod/entsys/uninstall_Sun_Java_tm__Enterprise_System_2005Q1.class
Domain Administration Server
Installing Depot: sun-asuee
======= 08/12/05 17:38:52 mal BEGIN swinstall SESSION
(non-interactive) (jobid=mohrelx9-0433)
* Session started for user "root@mohrelx9".
* Beginning Selection
* Target connection succeeded for "mohrelx9:/".
* Source connection succeeded for
"mohrelx9:/tmp/.jes_CaChE/HPUX_PA-RISC/.install/..
/Product/application_svr/Packages/sun-asuee".
* Source:
/tmp/.jes_CaChE/HPUX_PA-RISC/.install/..
/Product/application_svr/Packages/sun-asuee
* Targets: mohrelx9:/
<--[33%]--[ENTER To Continue]--[n To Finish]--> {"!" exits}
* Software selections:
sun-asuee.sun-asuee,l=/u02/sjs/SUNWapp,r=8.1,a=HP-UX_B.11.11_32/64,
v=SUN
* Selection succeeded.
* Beginning Analysis and Execution
* Session selections have been saved in the file
"/.sw/sessions/swinstall.last".
* The analysis phase failed for "mohrelx9:/".
* Analysis and Execution had errors.
NOTE: More information may be found in the agent logfile using the
command "swjob -a log mohrelx9-0433 @ mohrelx9:/".
======= 08/12/05 17:38:58 mal END swinstall SESSION (non-interactive)
(jobid=mohrelx9-0433)
NOTE: The software "sun-asuee:/u02/sjs/SUNWapp" was successfully
marked, but it depends on the following software items which
could not be found in the source. However, these items may
already be in the target. This will be checked during the
<--[66%]--[ENTER To Continue]--[n To Finish]--> {"!" exits}
Analysis Phase: sun-asu sun-aswbcr
ERROR: "mohrelx9:/": The software dependencies for 1 products or
filesets cannot be resolved.
Error: Depot sun-asuee install failed.
Install complete. Depot: sun-asuee
==> Skipping the uninstallation process as the sun-asuee is not installed or
removed already
==> Skipping the uninstallation process as the sun-asuee is not installed or
removed already
==> Skipping the uninstallation process as the sun-asdemdb is not installed or
removed already
==> Skipping the uninstallation process as the sun-asdemdb is not installed or
removed already
==> Skipping the uninstallation process as the sun-ashdm is not installed or
removed already
==> Skipping the uninstallation process as the sun-ashdm is not installed or
removed already
==> Skipping the uninstallation process as the sun-asdem is not installed or
removed already
==> Skipping the uninstallation process as the sun-asdem is not installed or
removed already
==> Skipping the uninstallation process as the sun-asdb is not installed or
removed already
==> Skipping the uninstallation process as the sun-asdb is not installed or
removed already
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
From the above error reported, it looks like some package error or missing. Any help would be greatly appreciated. Many thanks.Is it really no one out there that has ever successfully install Application Server Enterprise Edition 8.1 2005Q1 on HP-UX 11i?
-
Solaris x86 with Oracle RAC 10g Enterprise Edition Release 10.2.0.3.0
Hello,
Maybe you can help me (new on RMAN backup) in doing this.
I have configured a single Oracle 10g database to have backup with RMAN with following steps:
1. $ mkdir $ORACLE_BASE/rman_scripts
2. $ mkdir $ORACLE_BASE/logs
3. $ mkdir $ORACLE_BASE/tracking
4. $ mkdir $ORACLE_BASE/c_backup
5. $ sqlplus sys/<password> as sysdba
6. SQL> alter system set db_recovery_file_dest_size = 50G scope=both;
7. SQL> alter system set db_recovery_file_dest='${ ORACLE_BASE}/flash_recovery_ area' scope=both;
8. SQL> alter system set log_archive_dest_10='location= use_db_recovery_file_dest';
9. SQL> shutdown immediate
10. SQL> startup nomount
11. SQL> alter database archivelog;
12. SQL> alter database open;
13. SQL> alter database enable block change tracking using file '${ORACLE_BASE}/tracking/rman_ change_track.f';
14. $ rman target /
15. RMAN> CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK
TO '/var/opt/oracle/flash_ recovery_area/ORCL/c_backup/% F';
16. RMAN> CONFIGURE CONTROLFILE AUTOBACKUP ON;
17. RMAN> CONFIGURE BACKUP OPTIMIZATION ON;
18. RMAN> CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 7 DAYS;
19. RMAN> exit
I need to configure incremental backup with RMAN on a two node Solaris x86 with Oracle RAC 10g Enterprise Edition Release 10.2.0.3.0 installation.
We also use ASM to store database files, and have Oracle software installed on separate file systems (two Oracle roots for Node1 and Node2).
I have following questions:
1) where to put Flash Recovery Area (FRA)?
I saw recommendations to put FRA on the ASM, is this the best way to do it?
2) Can I put FRA on another file system (not on the ASM) which is available only from Node1? This way I can save space on the ASM.
3) Is it possible/recommended to run RMAN from Node1 only?
Below is the script used to run RMAN on the normal Oracle database (without RAC) which I need to change :
=============================================================================================
2.0 Oracle backup script: /opt/app/oracle/rman_scripts/backup.sh
Use this for daily backups, possiblly as a cron job.
Once a week run this: /opt/app/oracle/rman_scripts/backup.sh FULL
All other days of the week: /opt/app/oracle/rman_scripts/backup.sh INCREMENTAL
Note: You may have to change ORACLE_SID, ORACLE_BASE below to match your database.
=============================================================================================
#!/usr/bin/ksh
ORACLE_SID=orcl
ORACLE_BASE=/opt/app/oracle
ORACLE_HOME=${ORACLE_BASE}/product/10.2.0/db_1
PATH=${ORACLE_HOME}/bin:/usr/bin
LOGDIR=${ORACLE_BASE}/logs
LOGFILE=${LOGDIR}/rman.log
if [[ $# < 1 ]]
then
echo "usage: backup.sh FULL|INCREMENTAL"
exit;
fi
BACKUPTYPE=${1}
full='FULL'
incremental='INCREMENTAL'
if [[ $BACKUPTYPE == $full ]]
then
$ORACLE_HOME/bin/rman target / nocatalog log ${LOGFILE} append << eof
run {
backup database;
SQL 'alter system archive log current';
backup archivelog all;
delete noprompt obsolete;
exit;
eof
echo ''
fi
if [[ $BACKUPTYPE == $incremental ]]
then
$ORACLE_HOME/bin/rman target / nocatalog log ${LOGFILE} append << eof
run {
backup database;
backup incremental level 1 database;
SQL 'alter system archive log current';
backup archivelog all;
delete noprompt obsolete;
exit;
eof
echo ''
fiHi [email protected],
Q1) where to put Flash Recovery Area (FRA)?
A1) With RAC: on the shared storage
I saw recommendations to put FRA on the ASM, is this the best way to do it?
If you want your backups to be available for both nodes you have to use shared storage or tape using an mml library.
So if you want to use the FRA for rman backups and the database is on ASM just make ASM the standard for the FRA as well.
Q2) Can I put FRA on another file system (not on the ASM) which is available only from Node1? This way I can save space on the ASM.
A2) Than you cannot recover in case Node1 is down. Best would be to send your storage admin to a training course so he can manage the clustered raw devices needed for ASM.
Q3) Is it possible/recommended to run RMAN from Node1 only?
A3) No see A2.
Regards,
Tycho -
How to configure Sun Java System Application Server Enterprise Edition 8.1
hi all,
How to configure Sun Java System Application Server Enterprise Edition 8.1 to my IDE..( jstudio)
I have installed jes for my windows system.. so that i have removed platform version of Application Server..
I try to add the Enterprise application Server (Sun Java System Application Server Enterprise Edition 8.1) to JStudio IDE..
but i couldn't;Configuring your IDE to integrate with Sun App Server is something you probably will have to ask in some sort of JStudio forum. Other than for Netbeans, Eclipse, or possibly IntelliJ IDEA, you might not have much luck answering an IDE question here. I could be wrong though. Maybe somebody will have an answer for you and set me straight.
Maybe you are looking for
-
SBO_SP_TransactionNotification, check status of open items with other sales
Good morning, need help with a SQL to SBO_Transaction. I need to check the database (Table ORDR and RDR1) if there are items on other sales documents with the open status and must be for the same business partner of the document being entered. The sc
-
Hiya I have the 1st generation iPod and the connect to iTunes symbol come up and I no longer have a computer is there anyway I would be able to use it
-
How do I get rid of double scroll bars when integrating a tumblr blog on my muse website?
Hi there, Iim having problems getting rid of the double scrollbar I get when integrating a tumblr blog to my muse website? Is there a way to integrate the blog so I just get 1 scroll bar- just like on all other pages? Thank you
-
Org model for sales and service
Hi, I have an issue while creating org model, I want to maintain organization for sales and service differently under a org unit, but in service org element when I have selected service radio button and type also as service in Function tab, it is ef
-
Why does my imac have a question mark in the doc sayin start osx
my imac has a question mark in my doc. on top of that question mark it say "start osx" how can i fix this