Do you know if the Digidesign 192 will work with Logic Pro X?

Hi everybody! The question is simple, maube the answer too... Do anyone know if the Digidesign 192 I/O will (completely) work with Logic Pro X or if it needs other devices (such as controllers, internal or external card, etc.)? Thank you all.

Hi Jacub,
I have a 2i4 running Mavericks 10.9.2 on a Mac Book Pro, and my unit works properly, please make sure your run the unit with the class compliant mode app (click the link below):
http://us.focusrite.com/downloads?product=iTrack+Solo
Please contact Focusrite support if you have any more concerns.
Best Regards,

Similar Messages

Hey do you know if the wireless mouse pad works with the ipad 2?

hey do you know if the wireless mouse pad works with the ipad 2?

There is no mouse or cursor used with iOS devices.

Will the Tascam FW-1884 work with Logic Pro X?

Hello,
I notice that the new Logic is 64 bit only and yet the Tascam FW-1884 is specifically listed as a supported control surface.
Tascam has not released 64 bit drivers for this device! Can anyone shed any light on this? Will it work only as a control surface and not an audio interface? Is the documentation in error? Anyone have this working with Logic Pro X?
Thanks,
Lyford Rome

Lyford,
Again, in regards to hardware... it is not about LPX compatibility.. It is about compatibility with the OS X version and it's CoreAudio... Once you 'get' that point then everything else makes sense...
Tascam are notorious about leaving owners of "End of Line" products 'high and dry' when OS X is updated... and as you have found... the 1884 is not compatible with Mountain Lion 10.8.4 and likely will never be so... because Tascam will not be releasing Mountain Lion drivers for it.. so, it is not something you can use with LPX, which requires Mountain Lion 10.8.4 as a minimum requirement.
As an aside, Apple have acknowledged they make an error in simply using the LP9 Hardware compatibility chart for LPX (as LP9 could be used with earlier OS X versions for which there were drivers for the 1884 for example) and have said they will be issuing an updated version "in the near future"......

HT5812 Will East West Quantum Leap SILVER work with Logic Pro X ?

I wonder if EWQLSO SILVER edition will work with Logic Pro X. I can't think of any reason that it should NOT but if anyone tested please let me know. The software is quite old..
Thanks

it's worthwhile considering the VSL Special Edition, but check whether anyone else is running it on macbook, my iMac (also 4GB) is very happy with it, and some of the sounds are wonderful.
Best
Steve

Does anyone know if the scanner function will work for an Epson Workforce 840 aio printer using Mountain Lion 10.8.2?

Does anyone know if the scanner function will work for an Epson Workforce 840 aio printer using Mountain Lion 10.8.2? How is the compatiblity generally speaking?

Hi,
The Epson Workforce 840 do support scanning on Mountain Lion via Apple Image Capture.
You may find the steps to configure the scanner by following the ICA Scanner Driver section below:
http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=168363&infoType=Dow nloads&platform=OSF_M_X8
Regards,
Shlomi

Does anyone know if m-audio 410 will work with OS 10.8?

does anyone know if m-audio 410 will work with OS 10.8?

The Canon UFR2 v2.41 driver for 10.7 that was released last month also works fine on 10.8.
This driver is for UK English regions where your model is known as the iR1024iF. If you want to check the Canon USA web site for the US English version of the UFR2 v2.41 driver then you should get the correct model name.

01v96i Yamaha...will it work with logic pro X

I bought the new Yamaha 01v96i Mixer but I can't make it works with Logic pro, in the list of available DAW I only find the 01v96 which is not the same and in-fact it does not work with the 01v96i.
Does anyone have an idea on how to set Logic for it or at least does anyone know if the new Logic Pro X has the new 01v96i in the list?

Lyford,
Again, in regards to hardware... it is not about LPX compatibility.. It is about compatibility with the OS X version and it's CoreAudio... Once you 'get' that point then everything else makes sense...
Tascam are notorious about leaving owners of "End of Line" products 'high and dry' when OS X is updated... and as you have found... the 1884 is not compatible with Mountain Lion 10.8.4 and likely will never be so... because Tascam will not be releasing Mountain Lion drivers for it.. so, it is not something you can use with LPX, which requires Mountain Lion 10.8.4 as a minimum requirement.
As an aside, Apple have acknowledged they make an error in simply using the LP9 Hardware compatibility chart for LPX (as LP9 could be used with earlier OS X versions for which there were drivers for the 1884 for example) and have said they will be issuing an updated version "in the near future"......

Has anyone figured out how to make the Yamaha 01V96i mixer work with Logic 9.1.8

Has anyone figured out how to make the Yamaha 01V96i mixer work with Logic 9.1.8 as a control surface ?

In YAMAHA01v96i:
Go to DIO/SETUP select Generic DAW. Go to MIDI settings page and set the desired port (personally I use Number 1), Select the same audio frequency you use in your DAW (I use 44.1KhZ)...at this point You should save a scene in you 01V96i to avoid to repeat all the procedure again.
Open studio manager, go to patch and set the input port from 17 to 32 respectively to USB1-USB16 (this will give you the return from you DAW to the 01v96i
Save again the scene overwriting the old one.
in LOGIC
Click on preferences, select Audio then select 01v96i, then click on control surface and select Mackie design Baby HUI and in the midi session set the same port that you've been setting on the Yamaha 01V96i (Port 1 if you follow this example).
That's more or less it.
It worked for me...so far

Will a Mackie Control Universal V.2.1.2 work with Logic Pro 9?

Will a Mackie Universal Controller V. 1.2.1 work with Logic Pro 9?

Mine does. There was something If I can remember how to do it about after the update selecting the controller to mackie controller. You have the option within the controller itself to be mackie controller or logic controller. If it powers up and says mackie controller, You should be fine. If you have a problem get back to me, Ill look for the link that tells you how to change it.

Does the Apple remote control work with MacBook Pro with retina? If yes, how can I sync it?

Does the Apple remote control work with MacBook Pro with retina? If yes, how can I sync it?
Thanks!

It should. First, turn on BlueTooth on the computer. In BT preferences be sure to check the option to look for all devices. Your remote should be picked up and a notice asking if you want to Pair it with the computer. Select Yes. Once it is paired it can be used to control your computer.

Can You assign mpk49 faders and knobs to work with logics mixer?

Just bought the akai MPK49. Just want to know what you can assign the faders and knobs to, and how you set it up in logic. And also whether you can assign the faders and knobs to control logics mixer volume. Thanks

ive found out how to do it. Make sure your keyboard is correctly installed. Then click on what you want to control. So open up the mixer and click on the parameter you want to control. For example if you want to control volume click on the volume fader (the actual rectangular thingy with the value in the middle). Then press 'command L'. Then move the fader and it should say assignment learned. Click on 'learn mode' in the bottom right hand corner of the window. And that should be it. The mistake i made was i was just clicking on the channel strip and not a specific parameter. Do the same for pan etc.... not sure if you can control the inserts like compression etc.... hope this helps

Will my Kurzweil PC3 work with Logic Pro 9?

I spent months looking for the right keyboard--what I mean by 'right' is one that I felt sounded best. I ended up with a Kurzweil PC3.
Before I purchase Logic Pro 9, does anyone know if I can use the sounds on board (Kurzweil objects) with Logic Pro 9, instead of using the built-in sounds (objects) in Logic Pro 9? If so, how does one do it? I don't want to use this beautiful keyboard as just a MIDI controller.

My own setup is similar to your discussion. I use a Native Instrument Komplete 6 audio unit as the interface for both midi and audio into and out of Logic Pro 9.1.8. You can set up a Multi-channel instrument in the Logic environment, or use the External Instrument plug-in. In any case, there is a fair learning curve to get this right, but the multi-instrument in the environment is completely capable of controlling the PC3 if you set up the correct Bank change and program change messages. There is one major problem that I am having and that is using PC3 Setup mode. If you set the PC3 into Setup mode and hit some notes, it produces a midi-feedback loop between Logic and the synth, causing the PC3 to go insane if you are connected using the USB port. This is because the midi out from the PC3 is sent thru the Logic track and back out to the PC3 causing a midi feedback loop. In program mode it isn't as bad but does cause a small amount of delay echo. The only way I have got around this so far is to connect using midi cables instead of USB then when recording I disconnect the cable from the Komplete 6 to the PC3 midi in, leaving only the midi cable from the PC3 out to the Komplete for recording to Logic (while monitoring what I am playing via the PC3 audio outputs). Then when I want Logic Pro to drive the PC3, I disconnect the midi in to Komplete and reconnect the midi out to the PC3. Playing the recorded Logic track now drives the PC3 without any feedback. But, there has got to be a better way! Any ideas would be appreciated.
I think this result is because Logic always sends midi notes thru to midi output. Is there some way of preventing this?

Will MainStage 3 work with logic pro 9

Hi
Will i be able to use Mainstage 3 with Logic Pro 9. I intend to use it for playing guitar over backing tracks made within Logic Pro 9. Also is latency a problem. I have 2.5GHz quad core I5 MacBook Pro with 4Gig RAM.

You shouldn't have latency problems if you have it set up properly. I can run both programs simultaneously on a 2009 dual core 2.4 MacBook Pro with 6 GB Ram. I would consider upgrading your RAM. You may want to try using the Playback plugin in Mainastage 3 for playing back your mixed down tracks. Then you would only need to run Mainstage by itself live.

TS4494 Do you know if the Apple wireless keyboard work on windows 8??

I'd like to introduce my cousin to the apple world giving him as a birthday present an apple wireles keyboard, but he uses windows 8 on his laptop. Does anyone knows if it is compatible ?

Welcome to Apple Support Communities
It's compatible, but it won't work as expected. The function keys for brightness and volume won't work, as they are designed to work with Macs.
Another possibility you have is to download the Boot Camp support software from the Apple website, decompress it, look for the Wireless Keyboard driver and install it. However, this shouldn't be needed because you shouldn't have any different problem than the function keys

Does anybody know if the iPhone 5S will work in other countries too? I wanna bring one to Brazil with me

Hi, I'm from Brazil and I would like to buy an iPhone 5S (GSM) here in the USA, and I would like to know if it will work in Brazil too

Read the specs and see if it supports the bands necesary to work in the countries desired.

Do you know if the Digidesign 192 will work with Logic Pro X?

Similar Messages

Maybe you are looking for