Do you know of an app like a weekly planner/ diary that I can see and edit in my phone and my boyfriend can on his? Been looking on the app store but can't seem to find one! Please help! :)
Do you know of an app like a weekly planner / diary that I can see and edit in my phone and my boyfriend can on his? Been looking on the app store but can't seem to find one! Please help!
Welcome to the Apple Community.
How about calendar, you can share calendars.
Similar Messages
-
I recently purchased a Canon 7D. I own Adobe Photoshop/Bridge CS5. I cannot open my raw images in Bridge. I have tried to download the plug in but does not seem to work. Please Help, I need to be able to open my raw images in Bridge ASAP. I do not want to upgrade to CS6 at this time.
If you had given us sensible information, I could look it up for you if your efforts fail.
Right now, I don't even know if you are on a Mac or on a Windows box.
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks! -
When I connect my ipod to a usb port on my computer, I can see it in my computer as a drive for a few seconds and then it disappears. It can be seen under devices but as a yellow triangle with an exclamation point in it. If I run trouble shoot, it states windows is disconnecting this device.
I can see it in itunes as a device. However, this is a brand new computer, running windows 7. My last one bit the dust in mid use. I want to save the songs on my ipod and to do that I believe I need to be able to see the files on the ipod.
Any help would be greatly appreciated.Great Troubleshooting on your own so far!. (If you got 2 PC and 2 iPod would be much easier, some of the people in this community has more than 2 of each.)
Hope you did not connect it to a USB Hub, the sync cable must be plug in directly to a USB2 port at the back of the Desktop Computer.
If you have a spare Notebook, with iTunes, connect it to the Notebook, to check if the iPod is working or hung.
Can you iPod run and play songs, when disconnected from the PC? (Sorry, for just asking the obvious)
Anyway, just hard reset your iPod, so that we can start from scratch
1. if your iPod is hung, reset it by pressing Menu and Center button for at least 10 secs till the Apple logo, comes on. (this won't delete your songs in the iPod, if they are not corrupted))
2. Connect it back to your Notebook or Desktop.
if your iPod screen is dead, try charging the battery by connecting it to another computer. if it doesn't connect to successfully to another computer, it may need servicing.
Good luck! -
I liked the "Power Search" for music in the itunes store but can't find it in the menu box top right. How do I search for a song, artist or album now?
If it's an auto-renewing subscription then there is info on turning them off on this page : http://support.apple.com/kb/HT4098
-
42404 error after downloading itunes (20+ times!) can access the itunes store but can't do any downloads... itunes support has not offered any valid suggestions
This is EXACTLY what happened to me and many others. Tech support returned most of my money but not all of it. Figure that one out! It is clear no music is downloaded (or in queue), it is clear an unknown error message is produced, and it is clear we, the consumer, are still being charged anyway. Will Apple require a credit card from its customers and alienate those that do not wish to use a credit card? Will Apple insult its customers and make silly suggestions such as 'Use an iTunes gift card' in much the same way a forum moderator has already recommended?
I have an idea: Acknowledge the problem publicly (via email, for example) and fix it in a future update. Customers will be more understanding if they know there is a temporary problem and Apple is working hard to fix it. Oh, and return our money, please!
Windows XP Pro
Windows XP Pro -
I need to change my country in the itunes store, but can' do so, because of a $0.10 credit. How can I spend that money in order to change accounts.
Click here and request assistance.
(70172) -
whenever i try to download a rather large file i continue to get the "could not read source file" error. Tried new profile, uninstalling and looking for the compreg.dat file to delete nothing is working. Please help
Did you reinstall CS3 after CC?
For that matter, doing an in-place upgrade on the OS is always a gamble with Adobe programs. Reinstalling all the versions you need, in order, would probably solve your problem.
And you shouldn't need to save as IDML after opening the .inx in CC. -
As you can see in the screenshot here ----> Gyazo - b048a0770df6264af1ff398951acd4f9.png I have typed a higher resolution but when I try the pixles never seen to ever go away and it increases the file size every time, is there an easier way? PS: if another adobe cc software is needed to complete this task I have every one so it doesn't have to only be in Photoshop.
The image has been reduced in size and over sharpened to the point that jaggies artifacts abound. You will not be happy with the result of interpolate the images up in size increase the number of pixels.. You need to find the original image file from the camera.
-
I Shut down my Mac by holding in the power button after my iMac froze and now when I try to turn it back it on all I get is the grey screen with Apple loge and the timer and doesn't get any further. I have tried the diagnostic test but nothing was found.
Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. -
Trying to make a purchase from the iTunes Store - but can't????
The USPS just advised me our zip code is changing as of 7/1 (in fact, the new zip code already works).
I tried to make a purchase last night but the iTunes Store profile with my old zip code threw up a flag. I changed the new zip code back to the old one but that doesn't work anymore either. In the pull-down menu of possible zip codes for my town, the new zip code isn't listed. I'm stuck between a rock and a hard place.
I tried finding a phone number to speak to someone but that doesn't work either. Anyone have any ideas?Reset security questions
http://support.apple.com/kb/HT5312
If you do not have a Rescue email, you need to call/email apple support, they will guide you through the process of resetting your security questions.
https://ssl.apple.com/emea/support/itunes/contact.html
http://support.apple.com/kb/HE57 -
please help me guys, and thank's in advance for the help..
On your computer, iTunes>Store>View My Account>Apple ID Summary>Payment Type...you need to make sure your credit card info is correct/entered here. If you don't have a credit card, follow these directions:
http://support.apple.com/kb/HT2534 -
IMovie 9 - Video is edited, shows the project clips, but won't play at all? Please Help
So i've finished all the editing on my project, But now it won't play. The clips show on the project reel (left side) but doesn't show the video in the viewer on the right side. Space bar just sent the red tracking bar back to the beginning but won't play. Hitting the play button makes nothing happen, and playing full screen doesn't play the video either.
HI and welcome..
Open a Finder window. Select MacintoshHD in the Sidebar on the left. Now open the Library folder, the Input Managers folder, the Scripting Additions folder, and the Application Support folder.
If you see any files related to the CTLoader / Toolbar, move them to the Trash.
This thread an help you find those files. http://discussions.apple.com/thread.jspa?messageID=12158485�
Troubleshooting help here for when Safari Quits Unexpectedly
If nothing above has helped, if Safari has just crashed, press the Report button on the CrashReporter dialog box to view the crash information.
Now copy/paste the entire contents of the Crash Reporter window into your reply here. If the crash report dialog does not appear or the crash is hard to reproduce, crash logs can be retrieved from the ~/Library/Logs/CrashReporter> folder.
Carolyn -
Two iphones with the same id how do change them to separate ones please help
is there a way to change it
Read
Read http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
If you wish to share an Apple ID with family members then read: http://www.macstories.net/stories/ios-5-icloud-tips-sharing-an-apple-id-with-you r-family/ -
How do I reinstall Quick Time Pro for the second time if I no longer have the original email even though I have the registration code??
My PC died and I want to reinstall on a new PC.Download and install the "free" version of QuickTime Player from Apple.
Under its Edit menu choose Preferences / Registration and enter your info. This "unlocks" the Pro features found in the free download. -
I keep getting a message when I try to open iphoto that says that my photo library needs to be upgraded and my library will not be readable by previous versions of iphoto after the upgrade. What do I do??
Depends - you first off need to suypply us with information since we only know what you tell us
Like what version of iPhoto are you using? Have you recently installed any iPhoto (or iLife) updates or upgrades? Do you plan to use this iPhoto library with two or more different versions of iPhoto (no possible so stop now if you do)? Where is your iPhoto library?
Anything else that you can tell us that might let us give you a good answer to your question
LN
Maybe you are looking for
-
I purchased addional storage for iCloud after being advised that I was running out of storage. Later I discovered a iPhone which I do not own was added to my account . How I don't know. Anyway I want to cancel and get refund. How can I do this. Try v
-
Error getting while importing support package in R/3
Hi All, I am getting one error following error while importing support package in R/3. Open data extraction requests The system has found a number of open data extraction requests.These should be processed before starting the object import process, a
-
Multiple entries in a Z table with same key fields
Hi I do have a ZTABLE, with 3 key fields defined earlier. It consists of around 1 lakh records. Later onwards, two of the non keyfields have been made to key fields. This table is being populated with records at the time of saving a ztransaction. But
-
Max # of Objects in a universe
Is there a max # of objects in a cube that can be consumed by a universe (BI 4.0)? I am trying to place a universe on top of a large BW (7.3 SPS 5) cube. I am able to create the universe just fine, but when I try to refresh the structure the design
-
IDOC 2 XI: No receiver could be determined
Hello, I am glad to send a IDoc to XI! In IDX5 I got the error: <u>No receiver could be determined</u> Many questions: I wonder there is a "Sender Agengy": bss_lp_idoc an a "Sender service" bss_lp_idoc 1) Are the names for "Sender Agengy" and "Sender