Do you know tutorials for this button?

I want to include several buttons in my web designs, and I'd especially like to design this one, or any other similar one. Do you know good tutorials? Thanks in advance.

Techniques you need are described in this one:
http://vforvectors.com/create-the-opel-logo/

Similar Messages

Pop Up: The software you are installing for this hardware has not passed Windows Logo testing - AntiVirus

When deploying Endpoint Protection with SCCM 2012, some workstations are getting a popup saying:
The software you are installing for this hardware has not passed Windows Logo
testing and it references "Antivirus". Upon clicking continue anyway it finished installing.
I'm not able to duplicate it on command and not sure why it's happening. Anyone else see this or have ideas on how to troubleshoot?

Without a real screenshot (and maybe even being there), it's hard to say. IME this is not normal behavior and my first thought is that this is actually some malware causing this.
Jason | http://blog.configmgrftw.com
Sorry it took a while, was waiting for it to happen again. Here is an actual screen shot. I'm leaving it until I hear back from you guys. This client actually shows that the endpoint protection deployment state failed with this message:
Description: 0x8004FF03.
InstallUpgradeOrUpdateInProgress=4.1.509.0

Use Firefox for sensitive data & use a virtual keyboard plus internet antivirus. This current version does not allow such or an extension . Can you make provision for this?

Use Firefox for sensitive data & use a virtual keyboard plus internet antivirus. This current version does not allow such or an extension . Can you make provision for this?

Use Firefox for sensitive data & use a virtual keyboard plus internet antivirus. This current version does not allow such or an extension . Can you make provision for this?

My mobile phone is lost, please help me to find the serial number is: DNQKDBS8F8H4, my name is Yu Fan, thank you very much for this is my number: 15052995201

My mobile phone is lost, please help me to find the serial number is: DNQKDBS8F8H4, my name is Yu Fan, thank you very much for this is my number: 15052995201

We're not Apple here. We're users. We cannot locate your phone any more than you could locate ours.
If you did not have find my phone activated on your device, there's no way to track it.

Do you know rule for standard development ?

Hi exeprt,
do you know some document about creation of standard development ? I mean that a document where is explained all object to name on system to start a development in a new system.
tks.

Well for starters, here is a list of (all) possible objects to be created for which naming convention must be established:
Global booleans
Global constants
Global internal tables
Workarea global internal table
Global ranges
Global statics
Global structures (records)
Global types
Global variable (character)
Global variable (date)
Global variable (integer)
Global variable (packed)
Global workarea database table
Parameters
Check boxes
Radio buttons
Select options
Class
Interface
Local booleans
Local constants
Local internal tables
Workarea local internal table
Local ranges
Local statics
Local structures (records)
Local types
Local variable (character)
Local variable (date)
Local variable (integer)
Local variable (packed)
Local workarea database table
Forms using parameters
Forms using parameters (table)
Forms changing parameters
Forms changing parameters (table)
Forms tables parameters
Tables parameters must not be used anymore
Function Module/Method importing parameters
Function Module/Method importing parameters (table)
Function Module/Method exporting parameters
Function Module/Method exporting parameters (table)
Function Module/Method changing parameters
Function Module/Method changing parameters (table)
Function Module tables parameters
Tables parameters must not be used anymore
Function Module/Method exceptions
Method returning parameters
I'm not saying this list is complete, for example objects specific for module pool programming are not included, neither are BAdI's (or enhancements in general for that matter), Web Dynpro development (etc.) , but it will help you on your way. If somewhere along the line, some new objects are created at this customer, you should enhance this document.

I have searched the video and tutorials for this question.

I did a search on this question and came up with a big, fat zero.
I have some graphics of blank buttons. I want to add a submenu to one of my pages. I looked up "How to Add Text to a Blank Button" on the site where I got the button. Unfortunately, the only instructions I could find require me to write out some HTML coding. Now for my question. Is there a way to write code in Muse????????????????? Currently, I am preparing to re-download Dreamweaver CC. I hope I can set the button up there then save it and open the new product with Muse. If anyone has an easier suggestion, feel free to let me know. It could save me a lot of work. Thank you, in advance.
Sue

Thanks for your post.
I can understand the frustration when you can't find information, but I wanted to point out that using a generic subject such as this will reduce the likelyhood that you'll get a response as other customers will see it as vague and not follow up.
I think in this case what you would want to do is choose the Background Fill (click on "Fill" in the toolbar) item in muse and use this button image as the background for a text box or for a cell of a custom menu you have inserted. This way the text that makes up the text box/menu will float above the button.
If you want to go the HTML route, you can go to Object -> Insert HTML and insert HTML directly into your layout.
Cheers,
Justin

Do you know Timmings for trace files generated?

Hi,
I have done some sql traceing using DBMS_MONITOR package.
We can also enable SQL traceing using DBMS_SESSION.
I want to generate sql trace file for "particuler part of application".
When i did that i got some sql trace files,, now that "particuler part of application" was over application was idle..
but as time goes these files are still populating in size means they are still sql traceing going on...
My question is when and how trace files are generated?
Do you have idea???
Thanks and Regards,
Rushang Kansara
Message was edited by:
Rush

also what content of my sql trace file should i
consider for exacly tracing that "particuler part of
application".
Rushang
Parse Count To Execute Ratio
Take the numbers of parse count and divide it by numbers of time execute count if it is 1 then it means you are parsing the same statment everytime,If this ratio is 1 then it will latch the shared SQL area which will degrade the overall performance.Like if you execute a query which is using bind variable and this query is at yours front end level trigger (Forms) POST_QUERY then it will show you (parse count=execute count) which shows you are parsing for every triggering event which is bad ,for that you should put this seqeuel within PL/SQL procedure which cache the cursor and will turn in (parse count<Execute Count).
Large Diffrence Between Elasped Time And CPU Time
If this diffrence (Elapsed time[b]-CPU time)>1 then it means you are spending yours time in for waiting resources this waiting resources will in turn wait events e.g some one updated the row and dont realease by COMMIT or ROLBACK and the same span of time you want to update then you will see a lock in tkprof result in wait event section.If you read the data from hard disk (as first time you issue it reads from HD and then put into buffer cache during this reading a latch is grabed and will not let you read this data until you perform the alls read from HD to buffer cache this will also show you in wait events which is cache buffers chain
Fetch Calls
If yours Fetch calls=Rows then it means you are not using Bulk fetch and yours this code will take a lot of roundtrips which will in turn jam the network.
Disk Count
If every time yours disk count=current + query mode then you are reading alls block from disk alls the time ,usually oracle read once from disk and put it into SGA and should be found in SGA second time.
And there is many more...depend on yors environemnt setup but above are common.
As you said its reproducing the tkprof again and again ,make sure you terminate the session or you explicitly turn off the tracer by
ALTER SESSION SET SQL_TRACE=FALSE Khurram

Sorry dont know enough for this..

Just picked up a new airport extreme to connect my imac and macbook etc etc into our first home network. Plugged it all in - but in the set up its asking for a router address ? Whats this and where can I find it please. We connect to the internet via some kind of modem, think its DSL if this is relevant.
THanks for any help

I'm assuming that you're using the AirPort Utility in the "Assist Me" mode and you got to the page where you are asked for things like IP Address, Subnet Mask, Router Address, etc....correct?
With DSL, your ISP will provide service using either DHCP or PPPoE for connectivity...so on the setup prior to this page, you where provided with a number of choices. I am assuming that you selected "I use a DSL or cable modem with a static IP address or DHCP." Correct?
If so, with this choice, you normally do not need to enter the values for IP Address, Subnet Mask, Router Address, and so on, as these are automatically provided by your ISP. Just make sure that the value for Configure TCP/IP: is Using DHCP.

Would you pay $900 for this iMac?

Craigslist screenshot. This is available locally. I don't think I would want to pay much for a used, four year old computer. What you say?

Since this is Craiglist & cash only, suggest that you meet in a public place that has large crowds, examine the comp & get a receipt if you decide to purchase.

How change optical drive do you have vedio for this

how change optical drive do you have vedio for this

2006-2008 MacPros http://eshop.macsales.com/shop/superdrive/Mac_Pro_Xeon
2009-2010 MacPros http://eshop.macsales.com/static_pages/Framework.cfm?page=superdrive/sdl_macpro_ 2009.html
Stefan

I believe some how some way my iPhone or appleID has been hacked into. My iPhone sent 3 iMessages out that I did not type or send - 2 while I was sleeping and one while I was in mid imessage conversation. Please help if you know anything about this!

I believe that my iPhone or apple ID has been hacked into. Three imessages were sent from my phone that I did not type or send - two while I was asleep at 1:15am and in the morning during an iMessage conversation. These messages were to my boyfriend about my boss. Apple and AT&T have been somewhat helpful but both are pointing fingers at the others saying they cannot track the message or see if my personal information has been compromised. I feel extremely violated because this hacker knows who my boyfriend is and who my boss is and I just started this job two weeks ago! I am about to go to the police because this person is trying to taint my good reputation and destroy my relationships at work and in my personal life. Does anyone have any incite on how this could be done and is there any way to trace where those three iMessages were generated from??

No I have my own iPhone iPad and MacBook so everything is set up on devices that are mine and as far as I know I never connected to anyone else's device and logged with my apple ID. But are you saying it is possible for someone to have obtained my apple ID and send an iMessage from their device with my contact information so it looks like it came directly from me? It's crazy I looked down at my iPhone and saw this message had just been sent that I did not type or send

Do You Know What Font This Is?..

I'm trying to identify the font used for the "East Greenwich
Free Library" heading on this page ...
http://seadogstudio.com/index_5
Thank you.

I used WhatTheFont -
http://www.myfonts.com/WhatTheFont/
It actually lets you upload images and uses OCR to detect the
characters -
works really well.
Shane H
[email protected]
http://www.avenuedesigners.com
=============================================
COMING SOON - Infooki [unboxed]:
http://infooki.sourtea.com/
Web Dev Articles, photography, and more:
http://sourtea.com
=============================================
Proud GAWDS Member
http://www.gawds.org/showmember.php?memberid=1495
Delivering accessible websites to all ...
=============================================
"Glen" <[email protected]> wrote in message
news:emec5k$b3u$[email protected]..
> You can also try:
http://www.identifont.com/
That site has been very
> helpful for me in the past to identify certain fonts.
>
> Glen
>
>
> "PAB1953" <[email protected]> wrote in
message
> news:emead1$8ud$[email protected]..
>> Thanks for the info. Much appreciated!
>
>

I've updated to Photoshop CC (2014) but I don't have Colour Adaptation for Content-Aware as demonstrated in tutorials for this update.

What do I need to do to have this option available to me?

That's Photoshop CC, which does not have the Color Adaptation feature. It was discontinued at 14.2.1
Photoshop CC 2014 would have the version number 2014.2.2 20141204.r.310 2014/12/04:23:59:59 CL 994532 x64
in that first line.
So you still need to install Photoshop CC 2014, or if you installed it, do a search for it on your computer.
Gene

VI Analyzer - How Would You Configure It for This Use Case?

My group has different people working on different LVPROJs for each software deliverable we have. Each LVPROJ uses our user.libs and instr.libs, as well as an overall "framework" that is the same for most LVPROJs.
I really think the VI Analyzer toolkit would be powerful for code reviews, but only if I can configure it in a way where which tests I run and what the criteria are can be saved and used on any project. I can't seem to get this to work for me. I want to save all those configurations, and use it on new LVPROJs easily - the easier I can make this process, the more inclined others will be to use this for code review. How would you do it? (if it's even feasible)
Solved!
Go to Solution.

I suggest creating a .cfg file without a project linkage, but with all the tests selected and configured as you want...so a .cfg file with no "Items to Analyze" specified. Then, when working on an individual project, open that CFG file, add the project's top-level folder to the analysis, then save that CFG file with that project. This means you can't have the project linkage in your CFG file, but assuming your project is all within some top-level folder, that shouldn't be much of an issue, since the CFG file will be "linked" at that point to the top-level folder containing your project.
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman

HT5622 this apple id has not yet been used with the itunes store that is the thing always appear every time i want to download. not worth working for my 3gs!! hope you help me for this!! thanksss..

how is this guysss???
can you help me i cant download any apps.

Hi ...
Try here > Using an existing Apple ID with the iTunes Store and Mac App Store
If you see, "None" in the Edit Payment Information window, select that.

Do you know tutorials for this button?

Similar Messages

Maybe you are looking for