Do you know what means the error -17502
Do you know what means the error -17502
Hi Victor,
What is the version of teststand you're using? How did you first encounter this error? I am trying to replicating this error on my side and would like to know when does this error occur?
Sometimes it is a possiblity that one of your registry keys located at HKEY_CURRENT_USER»SOFTWARE»NATIONAL INSTRUMENTS »TESTSTAND might have been corrupted. So deleting this folder should help getting rid of the error.
But since this is an issue, could you post your exported registry keys, so that we can investigate a little further into the issue. To export the registry key entry, right click on TestStand at ( HKEY_CURRENT_USER»SOFTWARE»NATIONAL INSTRUMENTS »TESTSTAND) and select export. Please attach this file here so that we could further take a look at it.
I hope to hear back from you soon.
SijinK
National Instruments.Message Edited by Support on 07-08-2005 11:47 AM
Similar Messages
-
from some reason (i'm not sure why..) my whole iphoto library got deleted. I restored the whole library from my backup. Now all the photos are blank but steel have the photo info. (date, res., size etc.) Do you know what's the prob.? why can't i see my pics.
It's says that file does not exist. How come? And why does it still show the image info.?
Where can i find those files (i have a daily backup)
The original image files are missing form your iPhoto library or iPhoto cannot find them, because the link to the originals has been broken. The image info is stored in the internal libraries, independent of the original files. That is, why you are still seeing them.
I restored the whole library from my backup.
Try restoring from an older backup, from before you first noticed the problem.
How large is the library, that you restored? Is the file size large enough to hold all your photos, or has the size been reduced? If the library is still large, the photos may still be inside, even if iPhoto cannot find them.
It's says that file does not exist. How come?
What happened, before your iPhoto library got deleted? Which applications have you been running, or which new software have installed or upgraded? Have you moved the library to a different disk or tried to use it from different user account or access it over the network? -
Do you know what means "RR amount" ?
Hi,
I am a beginner in Sap HCM and I don't understand what the following means :
"The monthly RR max amount in the remaining cycle is at 40% of MRS"
MRS = Monthly Reference Salary and I know I can get it via PA20 IT0008 but what means "RR max amount in the remaining cycle" and where, how can i find it.
Thanks for your precious help,
MarieHi,
It is not an error.
I simply don't understand what "RR amount" is ... and also I don't know where to find it in which infotype ...?
Anyway it is for Hong Kong.
Thanks
Marie -
I want to know what is the error 11556?
I want to know how can i fond to solve error 11556????
Type error 11556 in the search box at the top, or do a google search for iPhone error 11556
-
Do you know what is the number that i will call for support in saudi arabia?
Pls help me...
That is the only phone number for Apple Support in Saudi Arabia. You can search for an authorized Apple service provider and contact them, though:
https://locate.apple.com/sa/en/
Regards. -
What means the number at side of my computer's name?
Hi,
I wish to know what mean the number that appears at side of my computer's name [blablabla's Computer (138)]. This number increase by times after start up my computer but not sequentially, last night was 40 and today is 138.
Greetings!http://i46.tinypic.com/2nvn6f.gif!
Check out the following thread............
http://discussions.apple.com/thread.jspa?threadID=2396328&tstart=0
!http://i50.tinypic.com/izvwo1.gif! -
why would it state under the "more about this mac" that i already have10.8.3 and then in the app store say i need to "resume" do you know what i mean? is it possible i already did download mountain lion entirely once? I am confused and don't want it twice
This is cause by the way the App Store checks to see if an application is installed on your system.
Basically when an app is installed it is in the Applications folder and this is where the MAS looks for them. So it looks at your purchase history for the apps you bought and looks in the Applications folder to see if they are installed. If an app is in your purchase history but not in the Applications folder the MAS says you need to install it.
For normal apps this works fine but the OS doesn;t install into the Applications folder. So the MAS sees you have Mountain Lion in your purchase history but it's not in the Applications folder and so it says you need to download it.
Hopefully one of these days Apple wil fix this.
regards -
what does the error message that says " You are logged out because another computer is using this IP address." mean?
Some other piece of network ghardware on your home LAN (Local Area Network) is using the IP address your Mac is trying to use.
Reboot both your modem and router, or the Modem/Router combo box you have, and all pieces of networking equipment, computers and printers, you have connected to your LAN.
If you continue to get that error then it is a bug in OS X or you have your Mac set to a Static IP address that is being handed out by the routers DHCP server to some other device. -
What do you think of my Bash Script? What about the error checking?
Well what do you think of this Bash script
It works
I gave it some problems (i.e. unpluged the ethernet, messed up the URL's, uninstaled some programs...) to see if would report errors and stop or just keep going... But it did
I just kind of thought up a way to do some error checking with the commands that I know.....
What is a better way to do error checking?
What do you think I should add/Do to this script?
#!/bin/bash
# Shell script to make a USB Tumb Drive for Flashing BIOS on a Lenovo Ideapad Y510.
# This script needs to be owned and run as ROOT with the "sudo command"
# i.e. sudo usbbiosflasher
# If you have anyideas send me a PM on ubuntufourms.org my user name is HunterThomson
# Name/Rename this script usbbiosflasher and save it to the ~/home directory.
# Then run the command- chown root:root usbbiosflasher
# Then run the command- chmod 755 usbbiosflasher
# Then copy the script to the directory /usr/bin.
# Run this comand to do that- sudo cp ~/usbbiosflasher /usr/bin
# You also must have the program "mbr" installed
# You can install the mbr program by running this comand in the shell on Ubuntu
# sudo apt-get install mbr
# In Arch Linux you have to get it from Aur
# First you will need to know a few things...
# You will also need to know the Mount Point i.e. /media/disk and the /dev path i.e. /dev/sdb1.
# You can find these by using the df -T comand.
# Run df -T in the shell. Then plug in the USB Thumb Drive and run the df -T comand agin.
# The new listing is the USB Thumb Dirve.
# Also check to make sure the File System tipe is vFAT or FAT16 or FAT32.
# If it is not use gparted to format it to FAT32.
# I am farly certen that all USB Thumb drives come formated with FAT file system out of the BOX.
# You may want to fromat it anyway just to make sure.
echo "Interactive Shell Script to Make a USB Thumb Drive \for Flashing BIOS On a Lenovo Ideapad Y510"
echo ""
echo "You will need to have the program mbr installed"
echo "If you are on Ubuntu Linux you can retreve it form the repositories"
echo "If you are on Arch Linux you will need to get it from the Aur repository"
echo "Open anuther shell and \do that now..."
echo ""
verify="n"
while [ "$verify" != y ]
do
printf "Do you have mbr installed... yes or no?"
read AN1
echo ""
printf "You answered... $AN1 I have installed mbr. Is this correct... y or n?"
read verify
done
echo ""
if [ "$AN1" == "no" ]
then
echo "Install mbr now. Then run this script agin"
exit
else
echo "contunuing script"
fi
echo ""
# The next comand will make a directory to put needed files into. Note this file and everything init will be owned by root.
mkdir ~/usbbiosfiles && check1="yes"
if [ "$check1" = "yes" ]
then
echo "Made directory usbbiosfiles... OK"
else
echo "Could not \make directory usbbiosfiles"
echo "look above \for \info"
echo "Fix the problem and run this scrip agin"
exit
fi
# The next two comands will get the FreeDOS file and the .ROM file.
cd ~/usbbiosfiles && checka="yes"
if [ "$checka" = "yes" ]
then
echo "Changing to the usbbiosfiles directory... OK"
else
echo "Could not Change to the usbbiosfiles directory"
echo "look above \for \info"
echo "Fix the problem and run this scrip agin"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
rm -r ~/usbbiosfiles
exit
fi
wget "http://www.fdos.org/bootdisks/autogen/FDOEM.144.gz" && check2="yes"
if [ "$check2" = "yes" ]
then
echo "Download of FreeDOS... OK"
else
echo "Could not Download FreeDOS"
echo "look above \for \info"
echo "Fix the problem and run this scrip agin"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
rm -r ~/usbbiosfiles
exit
fi
wget "http://ubuntuforums.org/attachment.php?attachmentid=78460&d=1216648756" && check3="yes"
if [ "$check3" = "yes" ]
then
echo "Download of the BIOS.ROM \file... OK"
else
echo "Could not Downlad the BIOS.ROM \file"
echo "look above \for \info"
echo "Fix the problem and run this scrip agin"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
rm -r ~/usbbiosfiles
exit
fi
# The next comand will name the .ROM file to the right name.
mv ~/usbbiosfiles/attachment.php?attachmentid=78460\&d=1216648756 ~/usbbiosfiles/06CN29WW.bios.update.tar.bz2 && check4="yes"
if [ "$check4" = "yes" ]
then
echo "Renameing of the BIOS.ROM \file... OK"
else
echo "Could not rename the BIOS.ROM \file"
echo "look above \for \info"
echo "Fix the problem and run this scrip agin"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
rm -r ~/usbbiosfiles
exit
fi
echo ""
# The next two comands set the variables. DEVX for the path i.e. /dev/xxx and MOUNTX for the mount point i.e. /media/xxx
verify="n"
while [ "$verify" != y ]
do
echo "You will need to know the Mount Point and the dev Path. You will also need to \make sure the File System \type is vFAT, FAT16 or FAT32."
echo ""
echo "With the USB Thumb Drive unpluged, Open another shell and run the comand df -T Then plug \in the USB Thumb Drive and run the comand df -T one \more time. The new device listed is the USB Thumb Drive. Note the Mount Point and The dev Path and the File system Type i.e. vFAT... If the File System \type is not vFAT, FAT16 or FAT32 you will need to fromat it with gparted. You may want to format the USB Thumb Drive anyway just to \make sure. In any \case delete all files and directorys on the USB drive before you go any ferther with this program."
echo ""
printf "Enter the dev path the USB Thumb Drive is at?"
read DEVX
echo ""
echo "Are you sure $DEVX is the dev path of the USB Thumb Drive... y or n?"
read verify
done
echo ""
verify="n"
while [ "$verify" != y ]
do
printf "What is the Mount Point of the USB Thumb Drive?"
read MOUNTX
echo ""
echo "Are you sure $MOUNTX is the Mount Point of the USB Drive... y or n?"
read verify
done
echo ""
install-mbr --enable A1 --partition 1 --force --timeout 0 $DEVX && check5="yes"
if [ "$check5" = "yes" ]
then
echo "Installing MBR on USB Thumb Dirve... OK"
else
echo "Could not install MBR on USB Thumb Drive"
echo "look above \for \info"
echo "Fix the problem and run this scrip agin"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
rm -r ~/usbbiosfiles
exit
fi
tar xjf ~/usbbiosfiles/*.tar.bz2 && check7="yes"
if [ "$check7" = "yes" ]
then
echo "Unpacking BIOS.ROM file... OK"
else
echo "Could not unpack BIOS.ROM file"
echo "look above \for \info"
echo ""
echo "Reformat the USB Stick to FAT32 with gparted"
echo "Fix the problem and run this scrip agin"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
rm -r ~/usbbiosfiles
exit
fi
gunzip ~/usbbiosfiles/FDOEM.144.gz && check8="yes"
if [ "$check8" = "yes" ]
then
echo "Unpacking FreeDOS files... OK"
else
echo "Could not unpack FreeDOS files"
echo "look above \for \info"
echo ""
echo "Reformat the USB Stick to FAT32 with gparted"
echo "Fix the problem and run this scrip agin"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
rm -r ~/usbbiosfiles
exit
fi
mkdir ~/usbbiosfiles/fdoem144 && check9="yes"
if [ "$check9" = "yes" ]
then
echo "Made directory fdoem144 in direcoty usbbiosfiles... OK"
echo ""
echo "Going to \sleep \for 5secs"
else
echo "Could not make directory fdoem144 in usbbiosfiles directory"
echo "look above \for \info"
echo ""
echo "Reformat the USB Stick to FAT32 with gparted"
echo "Fix the problem and run this scrip agin"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
rm -r ~/usbbiosfiles
exit
fi
modprobe loop && sleep 5 && check0="yes"
if [ "$check0" = "yes" ]
then
echo "Modprobeing loop... OK"
else
echo "Could not \modprobe loop"
echo "look above \for \info"
echo ""
echo "Reformat the USB Stick to FAT32 with gparted"
echo "Fix the problem and run this scrip agin"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
rm -r ~/usbbiosfiles
exit
fi
mount -o loop ~/usbbiosfiles/FDOEM.144 ~/usbbiosfiles/fdoem144 && check10="yes"
if [ "$check10" = "yes" ]
then
echo "Mounting FreeDOS on the fdoem144 directory... OK"
else
echo "Could not \mount FreeDOS on the fdoem144 directory"
echo "look above \for \info"
echo ""
echo "Reformat the USB Stick to FAT32 with gparted"
echo "Fix the problem and run this scrip agin"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
rm -r ~/usbbiosfiles
exit
fi
cp ~/usbbiosfiles/fdoem144/* $MOUNTX && check11="yes"
if [ "$check11" = "yes" ]
then
echo "Copying FreeDOS files to $MOUNTX... OK"
else
echo "Could not copy FreeDOS files to $MOUNTX"
echo "look above \for \info"
echo ""
echo "Reformat the USB Stick to FAT32 with gparted"
echo "Fix the problem and run this scrip agin"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
rm -r ~/usbbiosfiles
exit
fi
cp ~/usbbiosfiles/*.ROM $MOUNTX && check12="yes"
if [ "$check12" = "yes" ]
then
echo "Copying BIOS.ROM files to $MOUNTX... OK"
else
echo "Could not copy BIOS.ROM files to $MOUNTX"
echo "look above \for \info"
echo ""
echo "Reformat the USB Stick to FAT32 with gparted"
echo "Fix the problem and run this scrip agin"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
rm -r ~/usbbiosfiles
exit
fi
sync && check13="yes"
if [ "$check13" = "yes" ]
then
echo "Runing the syncing command... OK"
else
echo "Could not run the syncing command"
echo "look above \for \info"
echo ""
echo "Reformat the USB Stick to FAT32 with gparted"
echo "Fix the problem and run this scrip agin"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
rm -r ~/usbbiosfiles
exit
fi
umount ~/usbbiosfiles/fdoem144 && check14="yes"
if [ "$check14" = "yes" ]
then
echo "Unmounting of FreeDOS... OK"
else
echo "Could not unmount FreeDOS"
echo "Look above for errors or problems reported and fix the problem"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
echo "Reformat the USB Stick to FAT32 with gparted"
echo "Fix the problem and run this script agin"
rm -r ~/usbbiosfiles
exit
fi
verify="n"
while [ "$verify" != y ]
do
printf "Do you see any errors... yes or no?"
read AN2
echo ""
printf "You answered... $AN2 to errors. Is this correct... y or n?"
read verify
done
echo ""
if [ "$AN2" == "yes" ]
then
echo "User Repoted... Error"
echo "Look above for errors or problems reported and fix the problem"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
echo "Reformat the USB Stick to FAT32 with gparted"
echo "Fix the problem and run this script agin"
rm -r ~/usbbiosfiles
exit
else
echo "Success"
echo "I did a lot of error checking too and didnt find anything"
echo ""
echo "Go get a pen and paper to write down these instructions"
printf "Then hit the Enter to continue"
read WAIT
echo ""
echo "Now leave the USB Thumb Drive pluged into your computer and Reboot. When the Lenovo Logo POST screen appears hit F2 to enter the CMOS setup utility. Go over to BOOT tab and go down to HardDrive \(Not Boot Order) \then \select the USB Thumb Drive as the 1st hard drve. Then F10 and yes to save changes. Your compter will reboot agin. Then when the Lenovo Logo POST Screen appers on reboot hit F4 to enter the BIOS FLASHING program. The USB Thumb Drive will be seen as the C drive \in the list on the Left, Select it. Then \select the .ROM \file \in the list on the Right and start the BIOS FLASH. \(NOTE Your hart may stop beating... This is normal) Pray to any God you know of and your computer should restart just like normal. Hit F2 and the BIOS will now stay it is 06CN29WW. You will need to \set the boot order to the way you like it and other things \if you need to because they have been changed to the default."
fi
echo ""
echo "End of script"
Last edited by hunterthomson (2008-08-10 11:17:47)Personally..... (this is just how I would have written it - if it works, then it's good enough for me though )
I would change this whole block:
verify="n"
while [ "$verify" != y ]
do
printf "Do you have mbr installed... yes or no?"
read AN1
echo ""
printf "You answered... $AN1 I have installed mbr. Is this correct... y or n?"
read verify
done
echo ""
if [ "$AN1" == "no" ]
then
echo "Install mbr now. Then run this script agin"
exit
else
echo "contunuing script"
fi
To this much shorter code:
MBR='/usr/bin/install-mbr' # Or where ever you expect it to be
if [ ! -x $MBR ] ; then
echo "mbr doesn't appear to be installed."
echo "If it is installed, check it's location, make sure it's executable and then make sure the MBR variable in this script is correct"
exit 1
fi
I wouldn't have used the checkXX variables for each stage:
mkdir ~/usbbiosfiles
if [ $? != 0 ] ; then
#failed
echo "Could not \make directory usbbiosfiles"
echo "look above \for \info"
echo "Fix the problem and run this scrip agin"
exit 1
else
echo "Made directory usbbiosfiles... OK"
fi
There is an issue with the way you do your verifications - the user can never get out unless they answer 'y' or hit CTRL+C. Something like this gives them options:
verify="n"
while [ "$verify" != "y" && "$verify" != "n" ]; do
echo "You need to answer 'y'es or 'n'o"
read verify
echo $verify | tr "[:upper:]" "[:lower:]" # This converts the answer to lowercase so replies entered in upper case will still work
done
if [ $verify != 'y' ] ; then
exit 1
fi
One last thing I try to do in scripts... Declare all your binaries as variables at the start of the program, then execute the binary program by using the variable. For example:
# Binaries
TAR='/bin/tar'
CP='/bin/cp'
CHMOD='/bin/chmod'
# Execute tar and chmod the created file
$TAR cvzf /tmp/tarfile.tar.gz /etc/*.conf
$CHMOD 400 /etc/*.conf
This way, it's easy to change the path in future without having to hunt through the script if the paths change, and it also ensures you're calling the programs using the full paths to make sure you're not executing some strange variant or alias that someone has setup. If I use `chmod` 30 times in a script, and the path changes in the future or on a different system (`chmod` is a bad example cause it's highly unlikely to change, but you know what I mean), then all you need to do is update the variable at the start of the script, and it all works again without having to script-hunt and change it 30 times. -
Does anyone know what "video rendering error: -50" means? I am trying to back up a movie i made on iMovie and get that message every time, about 30 times... OSX10.9.2, iMovie 10.0.3, Toshiba externals 2TB etc
Hi Babowa and Apple:
Thanks for helping me. Here is my workflow:
I store any file that I save onto my external drives so that I don't fill up my main hard drive.....( I label each external hard drive by year + alpha, such as 14a, 14b etc.) Is that a problem? Any suggestions?
I know iMovie works from the main iMac HD and therefore needs to find the file that I want in the external drive, such as when I "import" a file from an external such as 14a into iMovie that has been previously downloaded onto the external 14a (I download all SD cards & tapes to externals)......and it sounds like you're saying that is causing iMovie problems because the file is not so easily accessible for iMovie?
I assume that iMovie processes the file that I have "imported" into an "iMovie Event" on my iMac HD. I label that version as say "NLGE 3000E" for my 3000th movie, Event version, "events" that is always rough.
After I have imported media as an event and have labeled an event, "NLGE 3000E," then I go to "new movie" that I assume is a "project".....and I label that version "NLGE 3000P1"...."P" for "project" and "1" for the first edition....also to help me keep track of where my movies go. I focus on "Projects" then when editing ...and watch which edition I am editing and which edition appears where.
I learned that I need to "share" all movies from "Projects" to save......and store my final versions on my external drive, 14a (eg) so that I am sure that I have a retrievable copy. I try to share to YouTube from iMovie and succeeded 1/10 tries.
Evidently a movie is not saved unless it is in "theater"?
Please see next "reply" for other comments about retrieval.
Thanks. -
Hello, I have a question regarding the sharing on iMovie. I have just recently purchased an Elgato Gaming Capture HD and I then finished my recording with that and put it into imovie. I worked long and hard on the project and when I go click the share feature on iMovie all the noral options pop up and when I actually click where I want to share it to nothing at all happens. If you know what is wrong/ what I am doing wrong please let me know.
Thank you.
PS: I am using iMovie 10.0.6./*line 957 error */
public void select()
for (count = 0; count <= p; count ++ )
if(P[count] != null){ /* validation */
m = (int)(P[count].getX());
n = (int)(P[count].getY());
if (Math.pow(-1, m + n) == 1)
piece[m][n].setBackground(wselect);
else
piece[m][n].setBackground(bselect);
step = 2;
} -
Im getting error 2 when tryig to download ITUNES with windows 7, you know what i can do?
Im getting error 2 when tryig to download ITUNES with windows 7, you know what i can do?
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2 -
do you know what it means when messages are blue on iphone
Green messages are normal SMS messages and consume your carrier's SMS plan messages. Blue messages are those sent via the new iMessage service and are sent over a wifi or data connection. They do not count toward SMS limits, and can be sent to anyone with iMessage activated on any iDevice - iPhone, iPad, or iPod.
-
What is the error code mean? Why is there an error?And how to solve it ？Please give your answer. Thanks！
——1110340026
Attachments:
QQ图片20140403140655.jpg 108 KBSannieboyyyy wrote:
Could be me, but your VI is not working properly on the english version of LV. Can I suggest you to try programming in English in the future?
Yes, it's you. The VI is working just fine, except for some cosmetic issues with the labeling. I don't think is is a valid suggestion to force somebody to program in a specific language, especially since LabVIEW supports all these languages.
Here are the problems with the VI:
If you don't want an amplitude of zero, you need to set the amplitude control to a nonzero value before running. Simple as that!. (You could also set the input range for the amplitude control to exclude zero or use a case structure to skip certain code if the amplitude is zero).
You could also wire the error output to an indicator so it simply displays the errors, but keeps running.
Your while loop is currently useless. You can delete it and the program function will not change. Use a stop button at the loop condition.
Your while loop needs some timing so it runs at a reasonable rate. Either add a small wait or configure the signal generation to "simulate acquisition timing" instead of "run as fast as possible".
LabVIEW Champion . Do more with less code and in less time . -
How to update flash??? you know what I mean...
guys, I need this 11.0.1 update to export my application for ipad.
but its been impossible to update my flash. from help>updates > ERROR!
dowloading pack and trying to install > ERROR!
you know what I mean... but theres way to install being... you know I cant talk...lol
tnxxYup! http://warnerchad.blogspot.com/2010/02/adobe-updater-error-update-server-is.html
Maybe you are looking for
-
Error -1074397038 occurred at IMAQ Start.vi for 64bit Labview 2011 SP1, Win7
Hello, I am using a MC1362 camera from Mikrotron with a PCIe1433 framegrabber. I was using it with windows XP, 32 bit, labview 2010 SP1 32 bit, it was working perfectly fine. I just switch to windows 7 with labview 2011 SP1 64bit, and it is not worki
-
Auto update flash player for standard user without notification
Hello, I hope I don't ask an already answered question, I've searched around without finding precisely what I'm looking for, but if I've missed something please point me in the right direction. I'd like to know if there is a way for flash player to b
-
My iPad 2 doesn't have the app store I have looked in everything, reset the home screen and the restrictions is off but I still can't find it.
-
Using Image Capture to scan with Canon Pixma MX700
I previously had trouble connecting my Canon Pixma MX700 to my MBP, but soon figured out that I needed a new high speed USB 2.0 cable, versus the old one I was trying to use it with. Doh! So now it prints without any trouble at all, and I know that a
-
Hi, I tried installing Adobe Drive 4 on a few machines, but all got same errors: ----------- Payload: {8FD3F709-5124-400D-9AB5-A3B58C1AB8DB} Adobe Drive 4 x64 4.0.0.0 ----------- ERROR: DW030: Custom Action for payload {8FD3F709-5124-400D-9AB5-A3B58