Do you know what's inside? (N200-0769​)

Question

If so, I would like to know which clock-generator and sensor-chip it use?
Message Edited by m99 on 11-09-2008 07:08 AM

Answer 1

Hi I own a N200 (0769-BAG) and my sensor-detect script (from a Fedora installation) has produced the following sensor config file. Maybe it will be of some use ?
==================================================​======
Stopping lm_sensors:                                       [  OK  ]
# sensors-detect revision 5249 (2008-05-11 22:56:25 +0200)        
This program will help you determine which kernel modules you need
to load to use lm_sensors most effectively. It is generally safe 
and recommended to accept the default answers to all questions,  
unless you know what you're doing.                               
We can start with probing for (PCI) I2C or SMBus adapters.
Do you want to probe now? (YES/no):                      
Probing for PCI bus adapters...                          
Use driver `i2c-i801' for device 0000:00:1f.3: Intel 82801H ICH8
We will now try to load each adapter module in turn.
Module `i2c-i801' already loaded.                  
If you have undetectable or unsupported I2C/SMBus adapters, you can have
them scanned by manually loading the modules before running this script.
To continue, we need module `i2c-dev' to be loaded.
Do you want to load `i2c-dev' now? (YES/no):      
Module loaded successfully.                       
We are now going to do the I2C/SMBus adapter probings. Some chips may
be double detected; we choose the one with the highest confidence   
value in that case.                                             ​    
If you found that the adapter hung after probing a certain address, 
you can specify that address to remain unprobed.                    
Next adapter: SMBus I801 adapter at 1c20 (i2c-0)
Do you want to scan it? (YES/no/selectively):  
Client found at address 0x50                   
Probing for `Analog Devices ADM1033'...                     No
Probing for `Analog Devices ADM1034'...                     No
Probing for `SPD EEPROM'...                                 Yes
    (confidence 8, not a hardware monitoring chip)            
Probing for `EDID EEPROM'...                                No
Client found at address 0x52                                  
Probing for `Analog Devices ADM1033'...                     No
Probing for `Analog Devices ADM1034'...                     No
Probing for `SPD EEPROM'...                                 Yes
    (confidence 8, not a hardware monitoring chip)            
Probing for `EDID EEPROM'...                                No
Some chips are also accessible through the ISA I/O ports. We have to
write to arbitrary I/O ports to probe them. This is usually safe though.
Yes, you do have ISA I/O ports even if you do not have any ISA slots!  
Do you want to scan the ISA I/O ports? (YES/no):                       
Probing for `National Semiconductor LM78' at 0x290...       No         
Probing for `National Semiconductor LM78-J' at 0x290...     No         
Probing for `National Semiconductor LM79' at 0x290...       No         
Probing for `Winbond W83781D' at 0x290...                   No         
Probing for `Winbond W83782D' at 0x290...                   No         
Probing for `IPMI BMC KCS' at 0xca0...                      No         
Probing for `IPMI BMC SMIC' at 0xca8...                     No         
Some Super I/O chips may also contain sensors. We have to write to
standard I/O ports to probe them. This is usually safe.          
Do you want to scan for Super I/O sensors? (YES/no):             
Probing for Super-I/O at 0x2e/0x2f                               
Trying family `National Semiconductor'...                   No   
Trying family `SMSC'...                                     No   
Trying family `VIA/Winbond/Fintek'...                       No   
Trying family `ITE'...                                      No   
Probing for Super-I/O at 0x4e/0x4f                               
Trying family `National Semiconductor'...                   No   
Trying family `SMSC'...                                     No   
Trying family `VIA/Winbond/Fintek'...                       No   
Trying family `ITE'...                                      No   
Some south bridges, CPUs or memory controllers may also contain
embedded sensors. Do you want to scan for them? (YES/no):
Silicon Integrated Systems SIS5595...                       No
VIA VT82C686 Integrated Sensors...                          No
VIA VT8231 Integrated Sensors...                            No
AMD K8 thermal sensors...                                   No
AMD K10 thermal sensors...                                  No
Intel Core family thermal sensor...                         Success!
    (driver `coretemp')
Intel AMB FB-DIMM thermal sensor...                         No
Now follows a summary of the probes I have just done.
Just press ENTER to continue:
Driver `coretemp' (should be inserted):
  Detects correctly:
  * Chip `Intel Core family thermal sensor' (confidence: 9)
Do you want to overwrite /etc/sysconfig/lm_sensors? (YES/no): no
To load everything that is needed, add this to one of the system
initialization scripts (e.g. /etc/rc.d/rc.local):
#----cut here----
# Chip drivers
modprobe coretemp
/usr/bin/sensors -s
#----cut here----
If you have some drivers built into your kernel, the list above will
contain too many modules. Skip the appropriate ones! You really
should try these commands right now to make sure everything is
working properly. Monitoring programs won't work until the needed
modules are loaded.
==================================================​===
Have a nice day