Do you know what this means? I am trying to share a movie project to Idvd. This is the error message: "The project could not be prepared for publishing because an error occurred. (-43)"
Please help
Hi
Error -43
-43
fnfErr
File not found; Folder not found; Edition container not found; Target not found
So Your original is still there ? or did You move or trash anything ?
Yours Bengt W
Similar Messages
-
After many hous of "rendering" the message appeared that "--could not be prepared for publishing because an error occurred error code= -34"
re-post in the iMovie forum where all the people that use that software are. This is the Lion 10.7 forum.
-
I've been trying to burn my projects in imovie to dvd's and i keep getting the forllowing error message "UNABLE TO PRPARE PROJECT FOR PUBLISHING"
"The Project could not be prepared for publishing because an error occured (Error in user parameter list)
Does anyone know why this is happening and what I can do to fix it?
Thanks!!Can you give more details? What exactly is the entire error message text? there should be an error number too. Are you trying to finalize this to an external disk?
-
When I click on finalize project in iMovie, an error message comes up that says "The project could not be prepared for publishing because an error occurred. (Not enough room in heap zone / )". How do I fix it, and what does it mean?
re-post in the iMovie forum where all the people that use that software are. This is the Lion 10.7 forum.
-
The project could not be prepared for publishing because an error occurred. (-50)
Hi
Error -50 paramErr Error in user parameter list
Can there be any external hard disks - if so How is/are it/they formatted ? Must be Mac OS Extended (hfs) if used for Video.
UNIX/DOS/FAT32/Mac OS Exchange - works for most but not for VIDEO.
What this means in Your situation is above me.
• free space on internal boot hard disk? How much ?
Video codec
• streamingDV, AIC etc. (not .avi, .mp4, .m4v, .wmv etc as they are containers not codecs)
Pictures
• in what format ? .jpg, .bmp, .tif, else ?
Audio
• from where/what format ? iTunes, .avi, .mp3, .aiff, else ?
The "com.apple.iMovie.plist" file
Many users has not observed that there are TWO libraries.
• Library - at root level
• Library - in user/account folder - THIS IS THE ONE to look into
from Luke Burns
I fixed the problem.. but it was very, very strange. I had a very long section for credits and set the line spacing to 1.0.. for some reason this caused it. I removed it, and it worked fine. I put it back, and I couldn't preview or play the video.
I don't know why that could cause that big of a problem, but it did..
Klaus1
You need more free space on your hard drive.
jonorparkerjon
After phone support from apple I ended up creating a new project and adding all 117 clips back in individually till I found out what clips flagged and would not allow me to export. I had 3 I deleted and replaced and everything works now 1hr after tedious work....
Where do Your material come from
• Camera
• External hard disk
• USB-memory
And all are connected so that iMovie can find it ?
Yours Bengt W -
This pops up when exporting in iMovie "Unable to prepare project for publishing: The project could not be prepared for publishing because an error occurred. (ParamErr: error in user parameter list)" I have turned off my Time Machine in terminal yet it remains. What do I do, I need your help PLEASE.
Hi
Error -50 paramErr Error in user parameter list
Can there be any external hard disks - if so How is/are it/they formatted ? Must be Mac OS Extended (hfs) if used for Video.
UNIX/DOS/FAT32/Mac OS Exchange - works for most but not for VIDEO.
What this means in Your situation is above me.
• free space on internal boot hard disk? How much ?
Video codec
• streamingDV, AIC etc. (not .avi, .mp4, .m4v, .wmv etc as they are containers not codecs)
Pictures
• in what format ? .jpg, .bmp, .tif, else ?
Audio
• from where/what format ? iTunes, .avi, .mp3, .aiff, else ?
The "com.apple.iMovie.plist" file
Many users has not observed that there are TWO libraries.
• Library - at root level
• Library - in user/account folder - THIS IS THE ONE to look into
from Luke Burns
I fixed the problem.. but it was very, very strange. I had a very long section for credits and set the line spacing to 1.0.. for some reason this caused it. I removed it, and it worked fine. I put it back, and I couldn't preview or play the video.
I don't know why that could cause that big of a problem, but it did..
Klaus1
You need more free space on your hard drive.
jonorparkerjon
After phone support from apple I ended up creating a new project and adding all 117 clips back in individually till I found out what clips flagged and would not allow me to export. I had 3 I deleted and replaced and everything works now 1hr after tedious work....
Where do Your material come from
• Camera
• External hard disk
• USB-memory
And all are connected so that iMovie can find it ?
Yours Bengt W -
When I go to share my Imovie to Itunes after a couple of hours I get the following message. "Unable to prepare project for publishing. That project could not be prepared for publishing because a error occurred(disk full)". What does this mean and how do I fix it?
This is the forum for iOS (iPhones and iPads),
I have refered it to get moved to the correct forum.
But my guess is that you have to clear space on your harddrive.
The video gets rendered when you out put it, so you will need lots of space to do so. -
I keep getting this message from Imovie:
Unable to prepare project for publishing. The project could not be prepared for publishing because an error occurred. (Error in user parameter list)Bartirn,
I called Apple under my Mac support contract. They were completely unfamiliar with the error you and I were encountering. Updating to 10.8.5 didn't help.
I'm stopping my TimeCapsule while I perform these tasks, but I don't know yet if I have a consistent work-around.
B -
I HAVE COMPLETED SEVERAL IMOVIES AND FINALIZED JUST FINE. NOW I GET THE FOLLOWING MESSAGE FROM MY LATEST PROJECT. "The project could not be prepared for publishing because an error occurred. (File already open with write permission)"! What is going on?
Hi
Error -49 opWrErr File already open with write permission
Trash the preference files while application is NOT Running.
Easiest way to find out if this is the problem is by:
• Create a new User-Account
• Log out of Your old one and into this
• Re-try iMovie
If it now works OK - then 99.9% the problem is iMovie pref. file that needs to be trashed.
from Karsten Schlüter
Some users notice on exporting larger projects from within iMovie that this operation is aborted with an 'error -49'
This issue occurs only on MacOs machines using 10.7x
try switching-off the Local Mobile Backup
in Terminal copy/paste
sudo tmutil disablelocal
Re-launch Mac
Yours Bengt W -
After attempting to process my movie, I get the following message. "The project could not be prepared for publishing because an error occurred. (OpWrErr: file already open with with write permission). Any ideas what I'm doing wrong?
Hi
Error -49 opWrErr File already open with write permission
Trash the preference files while application is NOT Running.
from Karsten Schlüter
Some users notice on exporting larger projects from within iMovie that this operation is aborted with an 'error -49'
This issue occours only on MacOs machines using 10.7x
try switching-off the Local Mobile Backup
in Terminal copy/paste
sudo tmutil disablelocal
Re-launch Mac
Yours Bengt W -
Trying to make a dvd from a project and this error message appears .The project could not be prepared for publishing because an error occurred. (-2125)
Hi
Error -2125
OK Error code - 2125 usually indicates that the movie is to large.
It use to pop up when going to iDVD !
iDVD - DO NOT CARE ABOUT Gbs at all. I got movies on 500Mb that do not fit and 50Gb that fits nicely.
iDVD - ONLY CARES ABOUT - Duration. Duration is Movie time + MENU TIME. Choice of
menu and animation of this can take lost of "DURATION" 15 minutes or even more.
Choice of encoding method and use of SL or DL DVDs determine the DVD limit.
iDVD 08 & 09 & 11 has three levels of qualities.
iDVD 6 has the two last ones
• Professional Quality (movies + menus up to 120 min.) - BEST
• Best Performances (movies + menus less than 60 min.) - High quality on final DVD
• High Quality (in iDVD08 or 09) / Best Quality (in iDVD6) (movies + menus up to 120 min.) - slightly lower quality than above
DL DVDs can store about double of these times.
ALTERNATIVE - The Error Code can indicate that free space on Start-up (BOOT) hard disk is
less than 25Gb (my minimum)
calbe - wrote
If you are getting OSStatus error -2125, I've seen this caused by the computer display sleep settings.
Try changing the sleep settings to never and see if you are able to export.
Yours Bengt W -
The project could not be prepared for publishing because an error occurred. (Not enough room in heap zone / )
how can i fix this problem?how can i fix this problem?
Go to the right forum.
This forum is for mobile iMovie.
you may need the iMovie Mac forum:
https://discussions.apple.com/community/ilife/imovie -
In iMovie I am getting this message...Unable to prepare project for publishing. The project could not be prepared for publishing because an error occurred. File already open with write permission.
How do I resolve this?Hi
Most often it helps by - Turning Off the TimeMachine application - during work in iMovie.
Yours Bengt W -
it says,The project could not be prepared for publishing because an error occurred. (Error in user parameter list)" What do i do so i can publish it?
I'm having the same problem.
When I export (and I want HD quality) I get the error message that
Unable to prepare project for publishing The project could not be prepared for publishing because an error occurred. (Error in user parameter list)
How do I free up more space on my startup disk? My hard drive has 158.61 GB free. Do I need to free up more space? -
Why am I suddenly getting this message after I've been using iMovie for a few years now and have never had any such issue before: The project could not be prepared for publishing because an error occurred. (OpWrErr: file already open with with write permission)
Two things
I meant search THIS FORUM
Error minus49 not same as ERROR 49
Yours Bengt W -
Unable to prepare project for publishing
The project could not be prepared for publishing because an error occurred. (Error in user parameter list)
How do I fix this???
I have downloaded my family movies captured on Hi8 video through a Dazzle hollywood DV-bridge to the iMac. Everything went well until I tried to finalize the project.I'm having the same problem.
When I export (and I want HD quality) I get the error message that
Unable to prepare project for publishing The project could not be prepared for publishing because an error occurred. (Error in user parameter list)
How do I free up more space on my startup disk? My hard drive has 158.61 GB free. Do I need to free up more space?
Maybe you are looking for
-
How to set the properties of plots in XY graph via VI Scripting
Hi, Is there any way out to change the properties of XY graph plots through VI Scripting? From main VI, I create an XY graph in another VI through VI scripting. I now want to change the Plot legend names, and their styles etc. I notice that these pr
-
My built in video camera on my MacBook Pro is not showing up on Photo Booth or Skype. It seems as if it may be disabled. Suggestions on how to fix this?
-
More help needed with download of 1.0
I have downloaded the old 1.0 several times. When I run the setup.exe is says it is the 2006- one. That is the 1.1 file that I don't want. How do I get to the 2005-11-01 1.0 file? Thanks
-
hey all, we authored a dvd with dvdsp5, and the dvd came out fine except that the picture ( a normal jpeg) "shimmers" in the menu page. also, our freeze frame shots in the film project ( edited on fcehd 3.0)itself also "shimmer." we used qt coversion
-
Passing Header Information in a Workflow to All Services
I need to pass a header element, for example a security element received in the request to the BPEL process, to all the web services (internal) which BPEL process calls (and consists of). How can I do this? Regards Farbod