Do you live dangerously and install FCP7 and FCPX on the same volume?

Hi, I went ahead like a crazy person and just installed FCPX on my system where I also have FCP7.
Now I see al these warnings saying that you should have a separate boot disk for FCPX and FCP7.
I have had no problems with FCP7 thus far.
Do you have both installed on the same drive? Does it work?
Please write a reply if you have so i can sleep easier
Thanks!

Yes, I have them installed on the same drive. They both work, though not simultaneously. Larry Jordan has had them on one drive for a couple of months.

Similar Messages

After clearing cash on mac applications won't lunch any more..I tried to delete apps like VLC player with app cleaner and again download and instal new but it's the same..goes for all apps that are not originally part of Yosemite. Please advise me?!

After clearing cash on my mac ( Go to folder: ~/Library/Caches and clear all, than to Library/Cashes and clear all again) applications won't lunch any more..I tried to delete apps like VLC player, firefox.. with app cleaner and again download and install the new one but it's the same..goes for all apps that are not originally part of Yosemite. I have done this cash clean up very often on Maverick without any problems. This time I done it again because I could not open my web site, the server has blocked me and I was trying everything including deleting cash from mac. Please advise me what to do..?!? Thanks in advance.

It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
http://www.adwaremedic.com/kb/baddns.php
http://www.adwaremedic.com/kb/hackedrouter.php
If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
(Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

Once I connect my iPhone to the computer to sync., the computer crashes. I unistalled and installed iTunes, still I get the same results. If I disconnect the iPhone from the computer, iTune will work, I therefore uninstalled the iTune from my computer.

Once I connect my iPhone to the compjuter to sync., the computer crashes, and continues to reboot as long as the charge cable is connect between the iPhone and the computer, once I disconnect it, then the computer and iTunes will function normally.
I had uninstalled and reinstalled the iTunes 3 different times, still I am getting the same results, I therefore had to uninstall the iTune from my computer to be able to do my work, and charge the iPhone at the same time. Please note that few weeks ago, everything was working fine.
What can I do to resolve this issue.
Thank you.
Magdi

If you have photos in the Camera Roll on your iPhone and have preferences set to open an image azure application on your pc when a camera is connected, your pc will do just that. That's how one transfers photos taken with the phone to a PC.
You can do two things to avoid this.
1. Just quit the image capture application and open iTunes. You do have iTunes 10.7 or higher installed on your pc, right?
2. You can change the preferences on your pc to do nothing when a camera is connected. And you can set the preference in iTunes to open iTunes when your iPhone is connected.

I have a Mac Pro with Snow Leopard and FCP7 installed I would like to run FCP7 and FCPX on the same computer, is this OK

I have a Mac Pro (early 2009) with Mac OS X version 10.6.8, I use this for video editing with FCP7. I would also like to install FCPX, my operating system is Snow Leopard. Is this OK or do I need to up-grade my operating system. I want to be able to use FCP7 and FCPX on the same Computer. Your advise will be appreciated.

You will see from the hardware spec that the latest version of FCP X requires Mavericks.
The Mavericks spec shows you can upgrade to Mavericks on your Mac Pro.
Ensure you have a bucket full of RAM installed.
Final Cut Pro X spec
Mavericks hardware spec

Wonder if anyone can help? Have just bought a new Macbook pro and installed FCP7. I thought that I would get quicktime pro but stuck with QTX. Downloaded QT7 but it won't let me install it. Any suggestions? B

Wonder if anyone can help? Have just bought a new Macbook pro and installed FCP7. I thought that I would get quicktime pro as standard but stuck with QTX. Downloaded QT7 but it won't let me install it. Says I can't do install as I already have QTX. Does FCP not come with QTpro or am I jsut being stupid. Any suggestions would be great. Thanks. B

Hi there,
Are you running Lion or Snow Leopard? either way this may help by the looks of it.
http://www.macworld.com/article/161320/2011/07/lion_quicktime7.html
cheers
Andy

TS2310 what does it mean when you're about to install itunes and it says This update requires OS X version 10.6.8 or later.??? i don't understand... Can someone please explain to me what that means...??? And how to fix it.

what does it mean when you're about to install itunes and it says This update requires OS X version 10.6.8 or later.??? i don't understand... Can someone please explain to me what that means...??? And how to fix it.

1. It means exactly what it says. Apple dropped support for earlier Mac OS X versions in iTunes 10.7.
2. Update the computer to 10.6.8. If it's running a Mac OS X version prior to 10.6, this requires buying a Mac OS X 10.6 DVD from the online Apple Store, which requires an Intel Mac with at least 1GB of RAM.
(93025)

How can i save my individual playlist on itunes on my external hard drive because i want to buy a laptop and install itunes and move all my music and playlist thats on my desktop to my laptop and almost all my music is from a bunch of cd's i own

how can i save my individual playlist on itunes on my external hard drive because i want to buy a laptop and install itunes and move all my music and playlist thats on my desktop to my laptop and almost all of my music is from a bunch of cds i own

Hello ryane84
The easiest and most efficient way to copy your music is to follow the steps under the External drive section. Make sure that you have organized the iTunes library first before you copy it over. Then put the copied iTunes folder in the same Music folder on your computer.
iTunes: How to move your music to a new computer
http://support.apple.com/kb/ht4527
Regards,
-Norm G.

I have just bought an iPhone 5 and it won't sync to iTunes. It says it needs iTunes 10.7, which I have downloaded and installed. I still get the error message and looking at "about iTunes" it says 10.6.3. What do I do??

I have just bought an iPhone 5 and it won't sync to iTunes. It says it needs iTunes 10.7, which I have downloaded and installed. I still get the error message and looking at "about iTunes" it says 10.6.3. What do I do??

Perhaps check to see if you're accidentally running two different versions of iTunes. There's some information on troubleshooting that in the Opening iTunes section of the following document:
Troubleshooting iTunes installation on Mac OS X

In my Iphone 5, Nothing on my App Store is working its displaying blank (Except for Genius section). I've tried to uninstall and install itunes and all its component but still it doen't fix. Not sure if its problem with apple servers. Someone help please!

In my Iphone 5, Nothing on my App Store is working, its displaying blank (Except for Genius section). I've tried to uninstall and install itunes and all its component in my desktop but still it doesn't fix the app store issue. Not sure if its problem with apple servers. Someone help please!

settigns>itunes and app store to make sure you are signed in.. If you are, you will see your account name..... anyhow, click your account name, sign out and sign back in
also go to to settings>general>reset and reset network settings... if that doesnt work settings>general>reset and reset all settings!
one of those shall work. The last step would be to restore your device (apple.com/support) HT1414

HT1926 I have troublshooted uninstalling and installing itunes and i still cant open it an error message keeps coming up: The procedure entry point AVCFPlayerApplesMediaSelectionCriteriaAutomaticallyKey could not be located in the dynamic link library AV

I am unable to connect toitunes i have followed the troubleshooting for unistalling and installing iTunes and i still get this error message and it will not open the following is the error message: The procedure entry point AVCFPlayerAppliesMediaSelectionCriteriaAutomaticallyKey could not be located in the dynamic link library AVFoundationCF.dll.
then i get this other error message also as follows: iTunes was not installed correctly. Please reinstall iTunes error 7 (Windows error 127)
can anyone help me?

See Troubleshooting issues with iTunes for Windows updates.
iTunes 11.1.5 was released today and may work better for you.
tt2

I am having sporadic issues after new hard drive install and recovery using Time Machine. The same sluggish response, start up screen pixelating...If I reinstall Lion will it wipe out other applications? My HD was formatted and partitioned correctly, I ha

I am having sporadic issues after new hard drive install and recovery using Time Machine. The same sluggish response, start up screen pixelating...If I reinstall Lion will it wipe out other applications? My HD was formatted and partitioned correctly, I have a late 2009 iMac.

Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps.

When I tried to open PS CC2014, it flashed a bit then quit, same with DW and INDD ... I also got this error message: Adobe creative cloud is needed to resolve this problem. However, it is missing or damaged. Please download and install a new copy of the C

This morning when I tried to open my CC2014 Photoshop, it started to open, then quit suddenly. Same with Dreamweaver and InDesign. I am a professional and do not have the time to screw around with this. When I tried to run CC app, I get an error that says "Adobe creative cloud is needed to resolve this problem. However, it is missing or damaged. Please download and install a new copy of the Creative Cloud from 'http://www.adobe.com/go/adobecreativecloudapp'." I did so and tried to run the app and got the same error. I tried the cleaner and it removed all of my apps, then I tried to install again, and got the same error. I am getting desperate now, I have clients waiting for their projects. I need help, please.

Allisonf55952352 have you utilized the steps listed in Error: "Failed to install" | Creative Cloud Desktop to resolve the current error? If not do you have any questions regarding the steps listed with the document?

I am changing laptops and have tried to download and install Acobat 9 Standard from the Adobe website, but get message that my serial number is invalid. I log in and double check my account and it shows as a valid serial number. Now what?

I am changing laptops and have tried to download and install Acrobat 9 Standard from the Adobe website, but get message that my serial number is invalid. I log in and double check my account and it shows as a valid serial number. Now what?

If you had it on a laptop that crashed and you threw away, it is still considered as activated on that machine. YOu should contact Adobe by chat or by phone and have them deactivate for you.
Here is a link to a page with options to help make contact:
http://www.adobe.com/support/download-install/supportinfo/
If you are getting a message that indicates the serial number is not valid, you should look thru the following:
Error "The serial number is not valid for this product" | Creative Suite
http://helpx.adobe.com/creative-suite/kb/error-serial-number-valid-product.html

I purchased Acrobat 9 Standard and I want to download and install it. I have the serial number. My computer is a PC.

I purchased Acrobat 9 Standard and I want to download and install it. I have the serial number. My computer is a PC.

You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
CS5: http://prodesigntools.com/all-adobe-cs5-direct-download-links.html

I had quicktime pro, I upgraded to snow leapoard and installed iLife and lost quicktime pro. How do I get it back. I tried re installing quicktime but it will not let me??

I had quicktime pro, I upgraded to snow leapoard and installed iLife and lost quicktime pro. How do I get it back. I tried re installing quicktime but it will not let me??

Mac OS X 10.6 includes QuickTime versions 10.0 and 7.6.3. The QuickTime 7 player will only be present if a QuickTime Pro key was present at the time of installation, or if specified as part of a custom install, or individually downloaded:
http://support.apple.com/kb/dl923
Snow Leopard update 10.6.4 included an update to 7.6.6 (if installed). You can install it from the above link even though it says for 10.6.3. It's the same version of QuickTime Player 7.6.6.
(Only QuickTime Player 7.6.3 or 7.6.6 can be updated to "Pro".)

Do you live dangerously and install FCP7 and FCPX on the same volume?

Similar Messages

Maybe you are looking for