Do you need to be connected on the Old and New Domain to run stsadm migrateuser?

Hi,
I need to migrate the items from DOMAINOLD\user to DOMAINNEW\user. I am running stsadm migrateuser, but my connection to DOMAINOLD will not be available on the scheduled migration. Will the command still work? or do I have to be connected on both DOMAINOLD
and DOMAINNEW to make this work?
Thanks

Hi Mark,
you don't need to be connected to the old domain as you would be already changed the domain on teh SharePoint server.
check this article
http://blogs.technet.com/b/sushrao/archive/2011/12/02/sharepoint-migrating-sharepoint-server-from-one-domain-to-another.aspx
Kind Regards,
John Naguib
Senior Consultant
John Naguib Blog
John Naguib Twitter
Please remember to mark this as answered if it helped you

Similar Messages

Regarding passport registration issues, I need to have a letter from you including both the old and new imei numbers. Could you please send me an email mentioning that I have changed the phones with the given imei numbers?

Regarding passport registration issues, I need to have a letter from you including both the old and new imei numbers. Could you please send me an email mentioning that I have changed the phones with the given imei numbers?

You're not addressing Apple here. This is a user-to-user technical support forum. If you want to contact Apple, use the Contact Us link at the bottom right of every page for information on how to do so.
Best of luck.

When I installed CC 2014, I ended up with the old and new applications.

When I installed CC 2014, I ended up with the old and new applications. When I uninstall the old one, it takes out the new one too. Suggestions?

Hi LeoOfMars,
This is an expected behavior. Please check : http://blogs.adobe.com/jkost/2014/06/installing-the-2014-release-of-creative-cloud.html
If you dont want to use the older version you can uninstall them.
Regards,
Rave

HT5548 I upgraded one of my programs and now the old and new both appear on launch pad, and I can't delete the old one. Is there a way I can do that?

I upgraded one of my programs and now the icons for both old and new appear on the launch pad. I don't need or want the old version to display, as it's been imported into the new one. I can't seem to figure out how to edit it off the launch pad.

Hi there,
More then likely, the old version was installed independently from the App Store. The article below goes over the process for removing these application.
OS X Lion: Install, update, and uninstall apps
http://support.apple.com/kb/ph4524
To uninstall other apps, drag the app to the Trash (the Trash is located at the end of the Dock), and then choose Finder > Empty Trash.If you change your mind, before emptying the Trash, select the app in the Trash, and then choose File > Put Back.Warning: When you empty the Trash, the app is permanently removed from your computer. If you have any files that you created with the app, you may not be able to open them.
Hope that helps,
Griff W.

How to get the old and new statuses of CAD indicator (DRAW-CADKZ) while changing the status of document (DRAW-DOKST)?

I want to delete the originals of document while changing the status of document based on CAD indicator status. For this I have implemented BADI DOCUMENT_STATUS01 and the method AFTER_CHANGE_STATUS. From this, the BADI is triggering whenever I am changing the document status and I can able to delete the originals. But here my requirement is to check the CAD indicator status to delete those originals. I.e. whenever the document status will change first time the CAD indicator status will also change. Based on that old and new status of CAD indicator I have to do delete operation.
If anybody has an idea about SAP documents please help me
Thank you,
Regards,
Ramesh

First the document is exists in SAP in FR status. But when the CAD system will connect to SAP then the status is changing from ‘FR’ to ‘IN’ after that the CAD Indicator is populating from Blank to ‘X’.
I want to know in which place the CAD indicator value is changing (any user exits available or any BADI s available when changing the CAD indicator) when connected to CAD system.

Unable to Connect to the Server and WLI Domain problem

Hi All
this is the details
I have installed installed WIntegration Server and using
quickstart click the Take to Platform tour I started all the servers
Note-- I have not installed separate weblogic server 7.0 and not started.
whenever I click started WebLogic Integration Studio and it shows
user --admin
password- security
url--t3://localhost:7001
once submit it shows always Unable to connect to the server
please help me ???????????????????????????????????????????/
Server is running fine I used quickstart--- Take the live platform tour to run
the below servers.
C:\bea\weblogic700\samples\platform\e2eDomain>"C:\bea\jdk131_08\bin\java" -hotsp
ot -Xms256m -Xmx256m -XX:MaxPermSize=256m -Xverify:none -Dcommerce.properties="
C:\bea\weblogic700\portal\weblogiccommerce.properties" -Dweblogic.jws.Production
Mode="false" -Dweblogic.servlet.ClasspathServlet.disableStrictCheck="true" -De2e
Sample.b2b.path.data=".\beaApps\e2eApp\data" -Dweblogic.Name=e2eServer -Dbea.hom
e="C:\bea" -Dweblogic.management.username= -Dweblogic.management.password= -Dweb
logic.ProductionModeEnabled=true -Dweblogic.management.discover=false -Djava.sec
urity.policy=="C:\bea\weblogic700\server\lib\weblogic.policy" weblogic.Server
Starting WebLogic Server...
<Aug 5, 2003 1:22:23 PM EDT> <Notice> <Management> <140005> <Loading configurati
on C:\bea\weblogic700\samples\platform\e2eDomain\.\config.xml>
<Aug 5, 2003 1:22:37 PM EDT> <Notice> <Security> <090093> <No configuration data
was found on server e2eServer for realm CompatibilityRealm.>
<Aug 5, 2003 1:22:37 PM EDT> <Notice> <Security> <090082> <Security initializing
using realm CompatibilityRealm.>
<Aug 5, 2003 1:22:38 PM EDT> <Notice> <WebLogicServer> <000327> <Starting WebLog
ic Admin Server "e2eServer" for domain "e2eDomain">
<Aug 5, 2003 1:24:23 PM EDT> <Notice> <B2BIntegration> <000000> <INFO: WebLogic
Integration - B2Bi Server started successfully.>
INFO: WebLogic Integration - B2Bi Server started successfully.
<Aug 5, 2003 1:24:31 PM EDT> <Notice> <AI> <000000> <Started WebLogic Integratio
n - AI Server version 7.0.4.0>
<Aug 5, 2003 1:24:35 PM EDT> <Notice> <BPM> <000000> <Started WebLogic Integrati
on - BPM Server version 7.0.4.0>
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
After the server has booted, your browser should
automatically launch and point to the WebLogic Server
Index running on this server. If your browser
fails to launch, point your browser to the URL
"http://Inforicadb:7501/index.jsp
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
=============== Initializing Logger ======================
<Aug 5, 2003 1:24:36 PM EDT> <Notice> <Management> <141053> <Application Poller
not started for production server.>
<Aug 5, 2003 1:24:46 PM EDT> <Notice> <WebLogicServer> <000354> <Thread "SSLList
enThread.Default" listening on port 7502>
<Aug 5, 2003 1:24:46 PM EDT> <Notice> <WebLogicServer> <000354> <Thread "ListenT
hread.Default" listening on port 7501>
<Aug 5, 2003 1:24:47 PM EDT> <Notice> <WebLogicServer> <000329> <Started WebLogi
c Admin Server "e2eServer" for domain "e2eDomain" running in Production Mode>
<Aug 5, 2003 1:24:48 PM EDT> <Notice> <WebLogicServer> <000365> <Server state
ch
anged to RUNNING>
<Aug 5, 2003 1:24:48 PM EDT> <Notice> <WebLogicServer> <000360> <Server started
in RUNNING mode>
please help me, urgent
Thanks in advance
Domain problem---------------------------------------------
I created WLI domain like this is it correct ?
Next I used Quick start's --Configure New Server
then single server option radio selected
then
single server name--myserver
server listner address---????????? please tell me
server listening port 7001
ssl listnening port 7002
username bala
password subramaniam
verify password subramaniam
c:\bea\user_projects\CIBC
configure database mail--
email address- [email protected]
email host: what need to give ??????? please tell me----
after I created domain called CBC it is in the
c:\bea\user_projects\CBC
then I saw it consists
1)wlai folder
2)dbinfo
3)application
4)keys
5)scripts
setdatabase.cmd
startweblogic.cmd
startmanagedweblogic.cmd
setwlidomaindata.cmd
wliconfig.cmd
checkdomain.cmd
Wliconfig.jar
startweblogic.cmd
stopweblogic.cmd
I try to startweblogic.cmd it open and closed no action
please tell me what is the problem????????????
with regards
bala

Oh boy! Let me see what's going on. Are you using the VZW Cloud or the BUA app? Please try downloading the VZW Cloud app if you dont already have it. And once downloaded. Tap the 3 bars in the upper corner and go down to "TOOLS", then tap "RESTORE CONTENT". That should do it!
VanetrisC_VZW
Follow us on Twitter @VZWSupport

Can you compare the performance of the old and new Time Capsules

HI,
I have had the older Time Capsule for some time, using it for back up but not as my primary router. Router was provided by ISP but it is aging and I have to purchase a new router to maximize performance. Would like to go Time Capsule only and am wondering if the new Time Capsule will be superior in performance as a route to the old. Any advice?

The "new" Time Capsule has wireless "ac" capability, 3-5 times faster than normal wireless, but your Mac will also have to have "ac" capability to really take advantage of the faster speeds.
Even if you don't use the "ac" capability immediately, the new TC runs much cooler than the previous version of the TC, and the antenna arrangement has been improved, which provides a bit better wireless coverage.

HT4527 So my computers switched the 'old' and 'new' computers for the homesharing option.

Old computer is running Windows 7
New computer is running windows 8
Both are connected over the same cable modem.
I followed the instructions to the letter and it kept doing it.
HELP!!! I need my music on my laptop as I am going to be traveling alot.

I am not familiar with "transfer manager." Did you perhaps use the Migration Assistant? What operating system is installed on your new computer?
If you look in your hard drive, in the Users folder, do you see a folder with the name from your user on your old computer?
Best of luck.

External backup drive will not mount on new mac mini. still works fine on the old one. new one is running mavericks

I just bought new-to-me mac mini running OSX mavericks.
Trying to migrate from old mac mini using simpletech external hard drive.
It still mounts on my old mac mini (system 10.5) but will not mount or show up when I plug it in to the new mac mini running mavericks.
Any ideas?

BDAqua wrote:
What exactly shows in System Profiler>Hardware>USB for those drives?
Boot from the Install Disc & see if they show up, not grayed out in Disk Utility.
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
We were thinking along the same lines. While at home I dug up a firewire enclosure and put a bootable GUID formatted drive in it (that I had in one of the usb enclosures) and started her computer holding down the option key and then chose to boot from the external firewire. All usb drives are now mounting upon connection. I asume that her drive has bad sectors on it (even though the SMART status says it's OK) and is not loading all the drivers properly for USB to mount. I was suspicious from the beginning that the OS was corrupt when she first had me look at it. It was at that point that I booted it in target mode, connected to my Macbook Pro, and then CCC'd to a usb drive that I had. I then had a couple of difficulties installing the new OS. Should have known......
I am now going to put a new drive in it for her and she'll be up and running.
Thanks so much for your help and thoughts that got me thinking as well.
pax

What are the differences between the old and new data flow technology?

I have seen many places mentioned the new data flow tech ( In BI7) are much different from the old one,, can anyone list a few differences?
Thanks

Hi Dylan,
An infosource can be used in the 7 flow model, but its purpose is completely different from the 3.x model.
In the 3.x model, the infosource consisted of 2 structures transfer and communication.
The transfer structure was where you specified which field in the datasource corresponds to which infoobject ie the field type.
You now do this in the datasource maintainence in 7.0 (the tabs called proposals and fields)
The communication structure was the structure which was available for uploading.
You can refer the link for the 3.x flow
[http://help.sap.com/saphelp_nw70/helpdata/en/90/64553c845ba02de10000000a114084/content.htm]
In the 7.0 flow, you generally use a DSO when you perform sequential transformations ie you want to change the data format or do some processing twice before you actually load to the final infoprovider.
The sequence in this case would be
Datasource -> transformation1 -> DSO -> Transformation 2-> DSO -> Transformation 3-> Cube
The disadvantage of doing this, is that the DSO will store data. To avoid this, you can use an infosource instead of a DSO.
You can refer the below link for using 7.0 infosources
[http://help.sap.com/saphelp_nw70/helpdata/en/7e/001342743eda2ce10000000a1550b0/frameset.htm]
Hope this helps.
Regards.

What are the differences between the old and new GarageBand?

I'm debating about purchasing the update from GarageBand '11 to the modern GarageBand. Could someone please list out the differences between the two so I can make my decision? I'd prefer both pros and cons, not just added features.

First of all, going from GarageBand '11 to GarageBand 10 is a major upgrade and not just an update. Both applications are very different.
The good news is, that you can and should keep both versions installed. GarageBand '11 will continue to work with GarageBand 10 installed. GarageBand 10 can use the loops and instruments from GarageBand '11, if you do not uninstall GB '11, and so your older projects can continue to work.
There are many differences between both versions.
GarageBand 10's user interface is more like Logic Pro X. Instead of selecting an instrument for a track and then adding effects, you select patches with predefined effects.
GarageBand 10 introduces smart instruments: Drummers that play automatically instead of just drum loops, smart strings, arpeggiators.
Also new: Amp designer to create your own amps.
It is easier to change the articulation for software instruments in the Midi Draw area,
But quite a few features, that made GarageBand '11 great have been discontinued. So really, keep GB '11 installed, if you upgrade. Then you can have the best of both.
Magic GarageBand is gone.
Podcasts are no longer supported. and the Movie track is more restrictive.
The Sound Effect Instruments, that let you add samples to the Musical Typing keyboard are no longer supported.
The iLife Sound effects collection if loops is missing.
The funny predefined vocal effects for the vocal transformer are gone.
Many instruments and loops are gone.
Duplicating tracks links the copies, so you can no longer edit the copies individually.
I am not sure, if my list is complete. These are just the differences, that are important for my workflow.

In ux the old and new menu's appear and nothing is moveable.

I downloaded Firefox UX and I understand that Many problems will appear. When I saw the screenshots I didnt see the old menu button, just the new one but on my computer they both appear. And when I hit customize no buttons are moveable (even the addon buttons). Anyone know whats wrong?

Yes, UX is very unfinished. Nothing works as it will in the future - it verges on being useless right now

Do you need an additional slot for the RBS and does the RBS count as an additional hard drive in the Sharepoint 2013 Server farm?

Hello Community
    If you have a clustered Sharepoint 2013 Server farm running RAID 10, on a
clustered WS2012 R2 server that has 10 hard drive slots:
        (4) drives being part of the Sharepoint 2013 Server farm
        (1) drive for the Web App Server
        (5) are for hot swap if any of the production hard drives fail
    The question(s) is:
        - If the server only has 10 slots for hard drives are you still allowed to add a
NAS/RBS drive and does the NAS/RBS drive get clustered also, or does this scenario require
reducing the RAID level down to RAID 5 to allow for NAS/RBS hard drive?
        - Does the NAS/RBS hard drive need a hard drive for hot swap?
        - Does the NAS/RBS drive have to have Sharepoint 2013 Server or WS2012 R2 running on it?
        - Does the Web App Server have Sharepoint 2013 running or just WS2012 R2 running on it?
    Thank you
    Shabeaut

RAID 10 requires a minimum of 4 hard drives. The LUN for RBS must be attached to the SQL Server, not SharePoint server, as a local drive. You just need to be running the minimum required OS for the version of SQL Server you're using.
Do you mean Office Web Apps by "Web App Server"? If so, that cannot have SharePoint installed on it. Otherwise, if you're just referring to it as another SharePoint server, yes it would have SharePoint installed on it.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Your computer must be connected to the Internet in order to initially configure synchronization settings. Please ensure that you are able to connect to the Internet and try again.

I keep getting the above message when I try to configure my synchronization settings...yet I clearly have an internet connection. I downloaded the most recent Desktop Software and that did not correct the problem.
What am I missing?
Solved!
Go to Solution.

Hello 1066stump,
Welcome to the BlackBerry Support Community Forums
The following KB article may help regarding the issue you are having:
http://www.blackberry.com/btsc/KB16471
Cheers,
-FB
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click "Accept as a Solution" for posts that have solved your issue(s)!

How to use audit command to track the old and new values by any DML?

Hi,
I want to track all the changes done by any DML. I also want to capture who did it, when it was done and where it was done.
Or is it possible to capture the user realted details in CDC feature of Oracle 10g?
Which will be the best possible solution?

You can Capture DML statements fired on a database by the following way, too.
satyaki>
satyaki>select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - Prod
PL/SQL Release 10.2.0.3.0 - Production
CORE 10.2.0.3.0 Production
TNS for 32-bit Windows: Version 10.2.0.3.0 - Production
NLSRTL Version 10.2.0.3.0 - Production
Elapsed: 00:00:00.22
satyaki>
satyaki>AUDIT ALL BY SCOTT BY ACCESS;
Audit succeeded.
Elapsed: 00:00:01.80
satyaki>
satyaki>Regards.
Satyaki De.

Do you need to be connected on the Old and New Domain to run stsadm migrateuser?

Similar Messages

Maybe you are looking for