Do you recognize the effects that's been used, when you see movies, music videos etc immediately?

From AE and its presets for instance?

Spider scene: look at all the bad matting and mismatched black levels.
Balrog scene: bad compositing (esp. transparency where it shouldn't be), mismatched black and white levels.
I think those were the worst moments, but the whole movie had very visible compositing mistakes, plus more than a few 3D CGI mistakes (bad motion match, bad camera match, bad lighting match, bad level of detail matches, etc.).
When you work on this stuff every day, the mistakes just jump out (kind of like having perfect pitch and listening to a poorly tuned orchestra).

Similar Messages

How to list the parameters that have been used when running a publication

All,
I am trying to run a publication on a crystal report, when I look at the instance, I can see the report title, the status of the instance , run by ... but not the parameter that I have put in the prompt.
However when I create the Publication base on a crystal report, I do have the opportunity to set a specific parameter ..
Now if I go to the same crystal report that has been embeded in my publication and schedule it , afterwards when looking at the history, I can see
- the status instance, run by who, the report title and the parameter ...
Any idea is welcome
thank you
Philippe

Hi Petra,
Please try to check the table OICQ7 with KNUMV from VBAK.
KR,
Sergey

HT1918 Itunes says my credit card info is wrong, the info that ive been using already.

I went to buy a song, and it says my computer is not autherized, but its the same computer ive been using. then it wont accept my credit card 3 diget info.

Is the address on your iTunes account exactly the same as your credit card bill e.g. spacing and format: http://support.apple.com/kb/TS1646 ?

Retriving the style that has been used for a charecter in a Document

how can i retrive the style that was used ( bold /italic , color , size etc or Style name ) with character in a defaultStyledDocument.

This should get you the attribute set for a given character:
StyledDocument doc = (StyledDocument)textComponent.getDocument();
Element element = doc.getCharacterElement( offset );
AttributeSet attributes = element.getAttributes();

Does anyone else have the problem that whenever I start up my computer it automatically opens the applications I had been using when closing down the previous evening. It does this even if I have shut them down when closing the computer. Is there a way of

Is there a way to avopid my iMac opening all my previously used applications everytime I start up the computer every morning.
It's especially annoying if I have clients with me who I dont want to see what I have been previously working on.
This applies especially to Photoshop and Indesign

If
Launch System Preferences and click on the “General” icon
At the bottom of the “Number of recent items” list, uncheck the checkbox next to “Restore windows when quitting and re-opening apps”

Deletting the file that has been used in 'Additional Files' in FILE SENDER

Hi people.
I've developed an interface that has to send a ZIP file to an email address.
I pick that file using a dummy file. This file is picked as an attachment and has been defined in 'additional parameters' of SENDER FILE.
My problem is that i want to delete that 'additional file' once it has been procesed. I think that this could be done running an operating system command.
My problem is that i don't know how to do this in UNIX systems.
Can anyone tell me how to delete (in UNIX) a file with name dummy.zip located in folder /usr/sap.../ ?
Regards,
Inigo

You can probably do this by executing a shell script on the server!
You can only run commands on the PI Server
See here for details and help on writing shell scripts!
http://www.injunea.demon.co.uk/pages/page205.htm

Safe to delete a "List Template" that has been used to create several libraries?

In SharePoint 2010, is it safe to delete a "List Template" from the Gallery that has been used to create several libraries? I have a user that has requested the template be deleted. But he has used the template to create several active
libraries that he needs to keep. I wanted to make sure there will be no impact to those libraries and associated workflow, etc...
Thanks!

Libraries created from a template are not tied to the template, so the template can be removed if it is no longer required. The same holds true for Site Templates.
Yes, the template can be removed.
One more thing, if you dont want delete the List template or having some fear than you can hide it from UI. in Template just hide it.
<ListTemplate Hidden="TRUE" />
But is you have the list definition than its different story.
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

How can i remove items from list that have been deleted when i click on them it keeps showing empty

how can i remove items from the list that have been deleted when i click on them it keeps showing folder empty

Actually, Reader SHOULD keep showing documents that no longer exist, I disagree. It's no big deal, and people will quickly realise why they can't open the file. They open more files, the old ones move off.
The REASON why it should not check is that checking whether a file exists can take a long time when things aren't good. For instance if a file server goes down, or a memory card is unplugged. That in turn would mean delays opening the File menu, and I've seen some software that can sit there for several minutes. That would really give people something of which to complain...

We have two users that have been using Creative Cloud for almost a year. Recently, sometime in the last 4ish weeks, the users can no longer run Creative Cloud apps. (Yes, our subscription is paid.) Error simply says administrator access is required

We have two users that have been using Creative Cloud for almost a year. Recently, sometime in the last 4ish weeks, the users can no longer run Creative Cloud apps. (Yes, our subscription is paid.) Error simply says administrator access is required to install. The apps have already been installed. The users cannot run them unless they are in the local admin group.Using "Run as admin" does not work. It gives the same error.
I have opened a case with adobe support and was basically told to suck it up and put the users in the admin group. Actually, what was said was that it is "mandated that the users have administrative rights".
There are a couple of things wrong with this. It was working for both users until recently - a recent required creative cloud update. The users have never been local admins yet the apps were working (poorly, but working).
We are in an enterprise environment and users simply do not have administrative rights on the computers.
I have changed permissions on all adobe folders, granting users or authenticated users modify or full control rights, did the same in whatever Adobe registry HKLM keys I could find. Nothing has allowed the users to run the apps - unless they are put in the local admin group.
Someone has to have a fix for this. Adobe apps have proved to have far too many vunerabilities to even entertain the idea of elevating user rights. I can't imagine that enterprise environments are allowing this.
Any help or suggestions are greatly appreciated.

Jeff,
Thank you for your response. The users in question are "standard" domain users. We do not reduce users permissions below the standard level.
The apps do not load with their current standard user permissions.
The thing that makes this odd, is that up until recently they did this issue with cloud apps. The only way I can make it work for them now is to put them in the local administrator group on their pc's - which is not going to happen.
This is what they now see. As I said before, this was not a problem up until recently they would see all their available apps. If I put them in the local admin group the apps are listed without having to install. Everything is there, just not accessible to the user.

I have Pandora uno that I been playing every month but I don't have the iPhone where I donwload the app now I have a different phone how can I transfer to the one that I'm using now

Ihave pandora uno that i been playing every month but I don't have the iPhone where I donwload the app now I have a different phone how can I transfer to the one that I'm using now

Not sure if you are asking how to obtain the Pandora app on the new phone? If so, the following has information for a variety of phone types including an iPhone: http://www.pandora.com/everywhere/mobile

Report with the alerts that have been thrown

Hi all!
We are using the XI alerts to send several e-mails according to the alert that have been thrown.
Now, I would like to know if some report could be automatically generated showing the information of these alerts. Is it possible?
Thanks in advance.
Regards,
Sergi

Hi Sergi !
That's strange. I assume you tried with a wide date range, just to be sure that it is not a filter issue.
Try this:
go to TX 'ALRTCATDEF', locate your alert category and write down the name. Maybe you can get it from the RWB Alert Inbox, I'm not sure. Anyway, in the ALRTCATDEF tx there will be one or more alert categories already defined. Also you can find the alert category in use in the part of the scenario where the alert is triggered.
Then go to tx SLG1, in object filter keep the "*" and this time complete the "External ID" field with the name of the alert category, matching the case.
Try to find the alert this way.
Regards,
Matias.

I'm moving an internal hard drive from an old computer to a new computer. How do I transfer the catalog data to my new computer so the Organizer of Photoshop Elements 6 will find the data on the hard that has been moved to the new computer?

I'm moving an internal hard drive from an old computer to a new computer. (My new compute runs Windows 8.1) How do I transfer the catalog data to my new computer so the Organizer of Photoshop Elements 6 will find the data on the hard that has been moved to the new computer? Is this possible or do I have to use the procedure of copying the catalog along with the photos to a back up hard drive and then restore them on the new computer?

The 'normal' procedure is to do a PSE organizer backup (not a copy or a backup from external tools) to an external drive, then a restore to the new location.
The advantage is that you have a backup of both catalog and media files and you don't have all disconnected files, which would happen with external backup tools. Also, if you restore with a more recent elements version, the catalog will be automatically updated to the new format.
The drawback in your situation is that you'll have either to overwrite all your files or restore to a custom location, creating a duplicate photo library (which supposes you have enough free space).
It would be possible to simply use the organizer in the old PC to move the catalog to a new 'custom' folder just under your C: root drive. The catalog would be accessible once the drive will be installed in the new PC. Then you would have all files 'disconnected' due to the fact that all your media files are now on a drive with a different letter. Reconnecting a whole library is a hard job with PSE6, less so with PSE11/PSE12.
If the idea of fiddling with the sqlite database with external sqlite manager tools is ok for you, I can describe the process more in detail. You only copy your catalog folder (as suggested above) to another location. Instead of trying the 'reconnection' way, you install the sqlite utility on the new computer. When the old drive is installed in the new computer, you simply edit a given record in the catalog database, catalog.psedb, and start the organizer with your copied catalog by simply double clicking the 'catalog.psedb' file.
Even if the last solution is much, much quicker, I would still create a new PSE backup : you have never too much safety .

In a PrC, how to delete data from the PSA that have been loaded in Prcs Chn

Hello,
In a process chain, how can I delete the data from the PSA that have been loaded within that process chain. I don't want to delete data that belongs to other business units that use the same datasource.
Thanks,
Andre

I dont think so you can achieve that, PSA is actually datasource dependent.
One you load from a datasource to PSA.That is accesible by multiple DTPs if you have created so.
As you said "I don't want to delete data that belongs to other business units that use the same datasource."
If you delete the PSA, you may have to repull the data from source system again and if thats delta it wont work out.
As said by above ppl you can include the "Delete PSA" in process chain but choose some 15 days buffer.
Hope this helps.

Printing the percentage of the file that has been loaded

Hello everyone!
I'm using a FileInputStream and a DataInputStream to read my .DAT file, but I want to print out the amount of percentages of the file that has been loaded, in a System,out.print(""); statement, please tell me how I can do this. :)
            fileInStream = new FileInputStream("C:/Documents and Settings/Benjamin Dahse/Dokumenter" +
                    "/NetBeansProjects/Online Multiplayer Game Client/build/classes/net/client/game/io/Cache/" +
                    "main_file_cache.DAT");
            dataInStream = new DataInputStream(fileInStream);This by the way, is how I get the path to the file, I want my DataInputStream to read.

Thank you for your comment, but out of this code:
            int percentage = 0;
            byte[] buffer = new byte[15000000];
            while(true){
                percentage += dataInStream.read(buffer, percentage, Math.min(buffer.length,
                        fileInStream.available() - percentage));
                System.out.print(percentage / fileInStream.available() + "\n");
                if(percentage >= fileInStream.available()){
                    break;
            }The only output I get is 3?

Assigning View permission to all the users that have been selected in contact selector - SP 2010, InfoPath 2010

I have a SharePoint InfoPath 2010 browser form with item level security. Only submitter
and approvers has access to the form. This form contains a people picker that is populated with the names of attendees
for the meeting they attended (which
I am able to store in Field2 below). I want to allow attendees to be able to view (grant view permission) the InfoPath form. Field 2 has the users in form of domain\user1;domain\user2; etc. Following the below step, I am getting error when I ADD or REPLACE
permission on current item. How do I go about assigning view permission to all the users that have been selected in contact selector?
Jitu

Hi ,
i understand that the text box and the people picker hold multiple user names and you want to grant user permission based on the user in the text box.
I have a test based on your description,the results are: When there are multiple users in the text box, the workflow will throw an error'Error Occurred'.It is the same with the people picker column.
You need to limit the peopel picker to only allow to select one user,in this way the text box will only hold one user.Then you can use the people picker or the text box to grant user permission.
Thanks,
Entan Ming
Entan Ming
TechNet Community Support

Do you recognize the effects that's been used, when you see movies, music videos etc immediately?

Similar Messages

Maybe you are looking for