Do you run Pre-Upgrade Assistant when migrate from 10.1 to 10.2

Hello,
I tried to upgrade from 10.1 to 10.2 on Windows. Base on installation guide, you have to install 10.2 in a separate ORACLE_HOME, then run utlu102i.sql through SQL before run DBUA. Since I installed 10.2 without create start database because SID is same as 10.1. How to run pre-upgrade assistant? Or should I setup new SID for 10.2 and change it back after migrate database from 10.1 to 10.2.
Your assistance will be appreciated,

I'd suggest to check the "manual upgrade/migration" method described in upgrade doc.
As a summary:
utlu102.sql is just a step to verify some prereqs needed before going to 10.2
You'll need to shutdown your 10.1 DB. Copy your .ora files from 10.1.to 10.2; adjust them appropriately.
Set your Oracle_home to 10.2; keep same SID. Startup upgrade, then run catpatch.sql (if i remember correctly).
All these steps are well described in the manual.

Similar Messages

Using DB Upgrade Assistant to migrate from 10.2.0.3

Can you use the DB Upgrade assistant to migrate from 10.2.0.2 to 11gR2 Or do you have to be on a higher release of the EE db (ie. 10.2.0.5) to use the migration assistant?
Thanks.

Hello,
this forum is dedicated for migrations of non-Oracle databases to Oracle, using the SQL Developer Migration Workbench.
You will better be helped if you post your question into the Forum: Database - Upgrade which you can find at:
Database Upgrade
Regards
Wolfgang

I am trying to update my iTunes to 10.5.1 so that I can upgrade my 3GS phone but am getting the following error message when trying to install the itunes:Install step failed: Run pre upgrade script for apple mobile device support. Contact software manufac

I am trying to update my iTunes to 10.5.1 so that I can upgrade my 3GS phone but am getting the following error message when trying to install the itunes: Install step failed: Run pre upgrade script for apple mobile device support. Contact software manufacturer for assistance. I am on a MacBook pro running 10.5.8 OS. Has anyone seen this before and how can I get it resolved.
Thanks for your help in advance....

Did you ever figure out the problem? "Contact Software Manufacturer"?? That sounds ominous... I've got the same issue and I'm pretty durn aggravated right about now....
Thanks!

I'm not able to upgrade my Mac to itunes 10.5. Keep getting message "Run pre upgrade script for apple mobile device support" any help please?

Hi I'm not able to upgrade my Mac OS X 10.5.8 to itunes 10.5 Keep getting message "the following install failed. run pre upgrade script for apple mobile device support" contact software manufacture for assistance. any help please?

Did you ever figure out the problem? "Contact Software Manufacturer"?? That sounds ominous... I've got the same issue and I'm pretty durn aggravated right about now....
Thanks!

HT4413 When migrating from time machine to my new hard drive, only some files and applications and setting are transferred, not all of them. In my latest back up I have them all. How can I fix that?

When migrating from time machine to a new hard drive, not all is transferd, only partial documents, applications , settings etc. How can I migrate the latest back-up with all the content.

sohs wrote:
When migrating from time machine to a new hard drive, not all is transferd, only partial documents, applications , settings etc. How can I migrate the latest back-up with all the content.
If you want to use Time Machine to recover the contents of one of its a backups to a new drive, follow the instructions in Mac OS X 10.6: Recovering your entire system. Note that you must select the "Restore System From Backup" option from the Utilities menu of the Installer disc to do this.
Also note that if you are transferring files to a hard drive to be used with a different computer, you should use Migration Assistant instead. This intentionally will not copy everything because some settings, applications, etc. are not compatible computer-to-computer. Migration Assistant will copy everything that is.

JMS issues when migration from weblogic 9.2 to 10.3.5

We are facing some issues when migration from weblogic 9.2 to 10.3.5
In weblogic 9.2 :_
BMP Entity EJBs used in our project are read-only in nature using entity cache, below is the configuration details
<!DOCTYPE weblogic-ejb-jar PUBLIC "-//BEA Systems, Inc.//DTD WebLogic 6.0.0 EJB//EN" "http://www.bea.com/servers/wls600/dtd/weblogic-ejb-jar.dtd">
<weblogic-ejb-jar>
<weblogic-enterprise-bean>
<ejb-name>
Company
</ejb-name>
<entity-descriptor>
<pool>
<max-beans-in-free-pool>300</max-beans-in-free-pool>
<initial-beans-in-free-pool>150</initial-beans-in-free-pool>
</pool>
<entity-cache>
<max-beans-in-cache>3500</max-beans-in-cache>
<idle-timeout-seconds>100000</idle-timeout-seconds>
<read-timeout-seconds>0</read-timeout-seconds>
<concurrency-strategy>ReadOnly</concurrency-strategy>
</entity-cache>
Entity beans will get refreshed using the JMS messges. with in the MDB descriptor files(weblogic-ejb-jar.xml) we are using the provider URL directly and XA enabled connection factory is set to false.
migration to Weblogic 10.3.5_
With the same configurations MDB are not not getting deployed in weblogic 10 with some exception, so we removed the provider URL from weblogic-ejb-jar.xml and changed the JMS configuration to use foreign JMS and XA enable connection factory is set to true. Now when ever the JMS message is triggered Entity bean is not getting refreshed with the updated values. i.e values are stale.
Can some one look into this and provide your inputs to resolve this issue.

I think the Entity bean refresh problem appears to be unrelated to MDBs. The MDB is only responsible for getting the message to your application (which in turn interacts with Entity beans). You might want to try posting your question to an EJB newsgroup.
Tom

HT201250 When migrating from time machine to my new hard drive, it migrates the first back-up I made several years ago. How can I migrate the latest back-up ?

When migrating from time machine to my new hard drive, it migrates the first back-up I made several years ago. How can I migrate the latest back-up ? I need time machine to migrate the latest back-up. Should I delete the older back-ups ?

As noondaywitch says, it should use the latest backup.
Where are your backups (external HD, Time Capsule, etc.)?
It sounds like there are two separate sets, and you're not connected to the right set.

When migrating from Bo6.5 to Bo4.0 what are the issues we will face?

Hi all,
When migrating from Bo6.5 to Bo4.0 what are the issues may come?
Thanks,
Hari.

Hi,
first of all you cant direnctly migrate from BO 6.5 to BI4. You have to migrate prior from BO 6.5 to XI 3.1 and afterwards to BI4.
This is a huge step cause BO 6.5 is a very legace version. You will face a lot of issues with the Security. You have to totally re- design it. You will also face issues with BCA Jobs. Also here you have to do a complete re- design. If you only use Full Client Reports you have to convert them to WebI in XI 3.1 prior to migrating them to BI4 cause with BI4 the support of DeskI has been stopped.
Maybe you consider to consult the SAP Consulting devision. This kind of Migration will be challenging.
Regards
-Seb.

HT4796 When migrating from a PC to my Mac user on the Mac.

When migrating from a PC to my Mac, the files get created under a new user on the Mac. How do I move the files to my user log on?

Check out the following KB Articles:
http://support.apple.com/kb/PH11393
OS X Mountain Lion: Transfer your information from a PC
http://support.apple.com/kb/HT1408
How to transfer data from a PC to a Mac

I just downloaded bootcamp 3.1 to upgrade from 3.0. I am using Snow Leopard. is there anything special I have to do run the upgrade version when I open Boot Camp Assistant?? Thank you

Hi everyone
I am running Snow Leopard on my early 2006 MBP. I just downloaded Boot Camp 3.1 so I can upgrade 3.0. Is there anything special I need to do to "install" 3.1 so that when I run Boot Camp Assistant it uses 3.1 instead of 3.0? Thank You.

The Boot Camp 3.1 drivers you downloaded have to be installed in Windows after running Boot Camp Assistant. That update does not apply to Boot Camp Assistant, and as you are using Mac OS X 10.6.8, you are using the most recent Boot Camp Assistant version for Snow Leopard.
Once you have installed Windows with Boot Camp, insert the Snow Leopard DVD in Windows and install the Boot Camp 3.0 drivers. Then, install the Boot Camp 3.1 drivers

HT4889 Am I wrong or does Migration Assistant not work in Mountain Lion (10.8.2) when migrating from a PowerPC running Tiger (10.4.11)? Apple really needs to get on the ball or face losing people buying their new desktop products.

The title alone speaks to my frustration about this issue.
Used the process that was recommended by Apple to migrate from my "Lampshade" iMac (PPC running 10.4.11) to the new iMac (Intel running 10.8.2) and I got bupkiss...
Just a spinning wheel (not beachball) and no drive recognized using Migration Assistant for both nor when using Target Mode on the iMac running 10.4.11 and Migration Assistant on the iMac running 10.8.2. Which is ironic, or more accurately oxymoronic, since the iMac in Target Mode (10.4.11) is recognized on the desktop of the iMac running 10.8.2 but not in the Migration Assistant. And before you can misdiagnose..it is not the Thunderbolt connection since I have the Apple recommended Thunderbolt to Firewire adapter and also used the Firewire 400 to 800 cable to expedite the transfer.
On a personal note...
I'm not bashing Apple for this...they are "head and shoulders" above the competition in what they do but I've been burned a few times so I feel I can share a small bit of loyal customer advice...I understand your iOS and mobile products hold huge sway in company focus and market-share but I find it a tad unwise to slack on the desktop applications. I don't recall any app for the iPhone/iPad family being made on the iPhone/iPad...only from desktop applications if I recall correctly. And how can I clearly "Move my Mac even further ahead" as your marketing states when I can't even migrate my files from my old Mac to my new one in a simple fashion as per your instructions?
I thank anyone in advance with an answer or even a workaround for this issue and please have a great day.

http://support.apple.com/kb/ht4889
Migration from Mac OS X v10.4 Tiger to OS X Lion
Migration from Mac OS X v10.4 computers to OS X Lion over your Wi-Fi or a wired network is not supported. However, if both Macs are equipped with a FireWire port, you can use Target Disk Mode to transfer your data:
Verify that both Macs are equipped with a FireWire port. Note that different model Macs may have different FireWire connectors, which will require an appropriate cable, such as FireWire 400 to FireWire 800.
On the Mac you want to transfer data from, Restart, and immediately hold the T key.
Wait for the FireWire logo to appear on the screen. If it does not, restart and try again.
Connect both Macs via the FireWire cable.
On the Mac you want to transfer data to, Open the Migration Assistant application.
Select the option "From another Mac, PC, Time Machine backup, or other disk" and click Continue.
Select the option "From a Time Machine backup or other disk" and click Continue.
Select your other Mac's volume, such as "Macintosh HD", from the list, and click Cont
EDIT: Actually I realize you did follow these directions and if your drive is seen on the new Mac it should work. You're entitled to free Apple support with the new purchase, I'd give them a call.

Get RC=8 Error message when running CSS Upgrade Assistant

I can't get to where I can safely uninstall 7.0 to upgrade to 8.21 because I can't get through this Upgrade Assistant Program. I get the following error message:
'An error occured while archiving your Client Security Solution data. If you uninstall Client Secutiy Solution version 7.0, you will delete all Client Security Solution data and settings.
RC=8'
This is from when I try to run file css8_upgrade_asst.exe
Can anyone help? Have a ThinkPad T43.

I've had the same kind of issue. If someone knows how to solve it, please let us know...
I've a Z61p
Ciao
Edulibellula

How to run Pre-Upgrade Check without upgrading License Server

Hi
How can I run the 8.8 Pre-Upgrade Check without upgrading to the 8.8 license server?
The Wizard forces me to upgrade it and if I upgrade it, the current 2007 does not run anymore. I want to check my DB's with the Check before upgrading any components and 2007 needs to stay alive.
Thanks
Franz

Hi Franz,
I would suggest you to check your DBu2019s in your test environment. Please take a backup of all DBu2019s from your live environment and restore them in your test environment once you will have enough free space.
Please always test the database upgrade in the test environment before doing it in the production environment.
For more information regarding Business One installation and upgrades on 8.8 version please refer to the Administrator's Guide 8.8, which can be found on the Documentation Resource Centre on the Portal. http://service.sap.com/smb/sbo/documentation -> Documentation Resource Center for Release 8.8
See chapters: 3.Installing SAP Business One and 5.Upgrading SAP Business One
Regards,
Ladislav Meszaros
SAP Business One Forum Team

Attaching a PLL automatically when migrating from 6i to 9i

Hi,
is it possible to attach a self-written pll-library automatically during the process of migration (6i->9i) when using the migration assistant ?
How can I achieve this ?
Where do I have to put entries in the migration assistant, converter.properties, search_replace.properties ?
(I have in mind the example of the attachment of the reports-pll rp2rro.pll containing the workarounds of run_report.)
Especially when migrating a great number of Forms to 9i it could be useful to execute an automatic attachment of self-written PLLs instead of attaching it manually.
Has anybody an idea ?
Best Regards,
Michael Wolters

Hi,
actually you would upgrade the application sources from Forms 6i to Forms9i and then run teh Forms Migration Assistant for the clean up /this at least is my understanding after asking one of our Designer Product Managers).
Frank

How do I set up a proxy server for webmail services to assist in migrating from NMS 4.15p6 on NT to iMS 5.1 on HP-UX.

I want to have minimal if no downtime at all when moving the message store. iPlanet support hinted at an "unsupported" proxy server solution, and would give no further information. I am running the MMP with 5.1 and that supports IMAP and POP migration, but I need support for webmail services as well to complete the migration from NT to UNIX with minimal distruption of thousands of users. I am using the MoveUser utility to move the message store in hopes that will clear up some store corruption we have been seeing.

To get this in a 'supported' fashion you might want to wait until the iMS 5.2 release. iPlanet has said this release would include a webmail proxy/mmp server to do exactly what you desire.
A proxy server would not be a solution to your problem as it would have to have access and knowledge to the users mailhost attribute to determine to which host to route the webmail connection. The webmail proxy/mmp will have this functionality.
You might want to contact your iPlanet rep about this product and maybe you could get a copy of it as part of a beta program. I know iPlanet is always looking for oppourtunities for feedback like this.
-Chris

Do you run Pre-Upgrade Assistant when migrate from 10.1 to 10.2

Similar Messages

Maybe you are looking for