Do you set the Firefox cache in bytes or kilobytes ? (about:config says integer)

I am using a 1GB ramdisk Windows 8 (NOT 64 bit). Do you set the browser.cache.disk.capacity
in bytes or kilobytes ? About:config says integer.

hello, that integer specifies the amount in KB - http://kb.mozillazine.org/Browser.cache.disk.capacity

Similar Messages

Can you fix , the fact that If you leave the firefox update window open for a long period (say 20 minutes in the background), then close all other windowns, then choose to install, it uses this extra time to estimate the download?

Can you fix , the fact that If you leave the firefox UPDATE window open for a long period (say 20 minutes in the background), then close all other windows, then choose to download update, it uses this extra time to estimate the download? (Mine said, 12 Hours to start with, but took under 2 minutes!)
== This happened ==
Not sure how often
== When you install update to 3.6.4 (Possibly for every update?)

The download should happen in the background (before you get an update window). I wonder why that didn't happen for you...\
Did you manually check for updates?

How do I set the FireFox browser to be compatible with my Brother MFC-8840D printer so it will translate color into grayscale when printing from a webpage?

Hi, I have a question about setting the FireFox browser so it is compatible with my Brother MFC-8840D printer to print in grayscale. Currently, if I print anything in color, like a Google Map, the colored parts of the map show up blank, whereas the color should change to grayscale in a black/white laser printer. Brother tech support told me to contact Mozilla about this issue.
In comparison, when I print a Google Map on my dad's HP printer (also using FireFox browser), the color map prints perfectly in grayscale, so I can see all of the street lines.

The Firefox 3.5.x branch has reached end-of-life and is no longer maintained. 
You will no longer receive security updates. 
You can update Firefox via "Help > Check for Updates" or download and install the latest Firefox 3.6.x. 
Firefox 4 and later require at least OS X 10.5 and an Intel Mac.
* http://www.mozilla.com/firefox/4.0/system-requirements/
If you have problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox program and save the DMG file to the desktop
* Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html
* Trash the current Firefox application to do a clean (re-)install
* Install the new version that you have downloaded
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

1.5 How to globally set the System Cache location

FROM ANOTHER USER ON ANOTHER BOARD:
This one did not get answered completely.
************************* Question:
Hello,
I want to deploy JWS on a client PC with Microsoft XP OS. This client have multiple users. JWS put a file deployment.properties in the directory "documents and setting" for the current user.
How can I create a uniquely file deployment.properties for all users of this client (new and existing profiles) ?
Create a directory "documents and setting/all users/application data/sun/java/deployment/" with the file deployment.properties don't work.
Create a directory "documents and setting/default user/application data/sun/java/deployment/" with the file deployment.properties is working but is not good for the existing users. This is good uniquely for new users.
is there a solution ?
King regards,
funchung
************************* ANSWER:
For windows, the system config file is at:
{Windows Directory}\Sun\Java\Deployment\
The value of the {Windows Directory} is determined by using the Win32 API GetWindowsDirectory.
So for example, on XP, the system config file is:
c:\WINDOWS\Sun\Java\Deployment\deployment.properties
The settings in this system config file will be used by all users on the system.
***************************** HIS REPLY
I've tried this and it doesn't seem to work.
I've also tried createing a deployment.config file as per the http://java.sun.com/j2se/1.5.0/docs/guide/deployment/deployment-guide/properties.html article and this doesn't work for me.
Has anyone done this successfully??
******************************** MY REPLY:
This is true.
I can get the system install to work if I add the parameter:
deployment.system.cachedir=C\:\\testcache
to the deployment.properties file found under:
C:\Documents and Settings\username\Application Data\Sun\Java\Deployment
but it will NOT work by adding it to the:
C:\WINDOWS\Sun\Java\Deployment
directory. It just creates a new default one in the user's folder.
What am I doing wrong?
If there is not a way to globally set the System Cache location, then this isn't much better than the user cache for being able to "install" the software once on the PC and let any user that signs in access that application.
We had high hopes for this, since this functionality was taken away from us once the java cache started being stored in the user's folders.
More details:
I just tried setting the mandatory=true setting and it tells me that it is not allowed to start because it can't find the
deployment.properties in the same folder (full path is displayed) but I know it is there, because it is the same folder. I even double checked the spelling.
Maybe there is a bug in the way it finds that properties file, or maybe I need to include something in that file that I didn't find in documentation?
All it has in it is the one line:
deployment.system.cachedir=C\:\\testcache
Can anybody help shed light on this?
It seems to be a bug that it can't find the deployment.properties file in the 'system' folder.
-Chris

I now found more on another thread:
http://forum.java.sun.com/thread.jspa?messageID=3500778&#3500778
You can close this one.
Sorry.

Setting the property "Cache Level" of the pcd object to "None".

Hi all
I have an EP 6.0 on NW04 SPS 17. I need to solve a problem and found note 960975. My question is, how could we change the setting the property "Cache Level" of the pcd object to "None"? Where should I go? Is it on the NWA, Visual Admin, Configtool or somewhere else?
Many thanks before.
Regards
Agoes
Message was edited by:
Agoes Boedi Poerwanto

Hi Agoes,
By using the tool Support Desk -> Portal Content Directory -> PCD Administration you can do this. Please note that this tool should only be used in debugging situations.
There is a new section "Release a Unit from the cache cluster wide" in this tool. With this new functionality, you can remove an object from the cache on all nodes in the cluster. If the object is still in use, it will be reread immediately from the database
Releasing the entire PCD cache can severely affect performance. Hence, if there are inconsistencies suspected with a single object, e.g. a role or an iview, the new section "Release a Unit from the cache cluster wide" can be used to evict the given object from the cache on all nodes in the cluster.
Cheers,
shyam

Is it possible to set the firefox back button to a custom action in the context of a websocket connexion?

Simply, is it possible to set the firefox back and forward button to custom javascript function to navigate in a websocket application.
Thanks in advance

You may get lucky, especially as Today is a "Sumo Day" with more contributors around than usual. Such a question tends to be slightly off topic, being a hack of a standard Firefox installation.
What I would suggest is that you try other forums, either a specialist linux forum or the popular Mozillazine forums: http://forums.mozillazine.org/index.php

Can you set the print margins in Preview?

Simple question: Is there a way to set the print margins when printing an image from Preview?
Thanks,
-ME

EagleSongs wrote:
I can set margins in other programs (like Photoshop, Word, Excel, Firefox, Chrome...), but there does not seem to be a setting for margins when printing from Preview. I don't want to resize the image, just get it to print in a certain position on the paper (template form).
In the case of Photoshop, you are placing an image on a canvas and can position the image to suit. Word and Excel have a Page Setup menu that lets you set the margin positions - which know since you have got the output you wanted. There is no Page Setup menu for most, if not all, Apple applications like Preview. Instead parts of the Page Setup menu have been added to the print dialog but margins is not one of them.
EagleSongs wrote:
However, I was trying to find a way to print from Preview and get it to position the image on the page the way I want.
Understood. Unfortunately you don't get that option in Preview. The image will be centred - both horizontal and vertical - based on the paper size and the printer you have selected in the print dialog. You could create a custom paper size with the margins you want to position the image and then use that custom paper in Preview. But your workaround of using Word gives you more control over the positioning of the image.

How do you set the font color for a specific entire row inside a JTable?

How do you set the font color for a specific entire row inside a JTable?
I want to change the font color for only a couple of rows inside a JTable.
I've seen some ways to possibly do this with an individual cell.
Clarification on changing the font color in an individual cell would be helpful too if
there is no easy way to do this for a row.

hai,
Try out with this piece of code.Create your table and assign the renderer to each column in the table.
CellColorRenderer m_CellColorRenderer = new CellColorRenderer();
for(int i=0;i<your_JTable.getColumnCount();i++)
your_JTable.getColumnModel().getColumn(i).setCellRenderer(m_CellColorRenderer);
class CellColorRenderer extends JLabel implements TableCellRenderer
CellColorRenderer()
setOpaque(true);
setHorizontalAlignment(LEFT);
setVerticalAlignment(CENTER);
setBackground(Color.white);
setForeground(Color.black);
protected void setValue(Object value)
 setText((value == null) ? "" : value.toString());
public Component getTableCellRendererComponent(JTable table,Object value,boolean isSelected, boolean hasFocus, int row,int column)
 if(isSelected == true)
 setForeground(Color.red);
 else
 setForeground(Color.black);
 setValue(value);
 return this;
regards,
bala

How do you set the default magnification for Acrobat. All documents that I open enlarge to 174% and are too big.

How do you set the default magnification for Acrobat. All documents that I open enlarge to 174% and are too big. I see how to change the size after the document is open by going to File/properties/initial view and saving this setting. I want all documents to open at 100% when they are first opened. Can I set this as a default view?

Hey Kris,
You might go to Edit> Preferences> Zoom
Do this without opening any particular PDF so that it applies to the program itself and not just one document.
Try this and then let me know.
Regards,
Anubha

How do you set the text of a Hyperlink component in code

I am using Visual Web pack in NB 6.0. How do you set the text of a hyperlink component in code?
Please see screenshots at
http://coba.usf.edu/departments/isds/faculty/agrawal/projects/java/
I have a hyperlink in a grid panel. I am using
hyperlink1.setText("Hello"); in prerender(),
but the Hyperlink shows up with the text "Hyperlink", whereas I was expecting "Hello". However,
hyperlink1.setUrl("http://www.usf.edu"); works as expected.
I tried nesting a static text in the hyperlink as suggested in the Creator guide (ed 2, Google project). I deleted the "Hyperlink" text in the properties editor but then the page turned out blank.
Thanks
Manish

Hi Manish,
Great to know you were able to fix your issue. The following blog entry has the list of resources you would like to look at for future.
http://blogs.sun.com/NetBeansSupport/entry/useful_resources_for_visual_web
Thanks
K

How do you set the duration for multiple stills in iMovie 2013?

How do you set the duration for multiple stills in iMovie 2013?
Before upgrading to the latest version of iMovie last month, I was able to set the duation of all of the stills included in an iMovie project at one time by clicking the apply to all still box in the adjustment pop up. That option is no longer apparent. If it is available I cannot find it, and I have tried several different ways to accomplish it. I have tried the iMovie help section and can find nothing to help.
Apple, do I really have to adjust close to 500 pictures to a 5 second duration individually???
REALLY??!!

...why wouldnt people want that level of accuracy when animating, especially when working to music at a specific duration?
Because often people are animating to words or beats in the music. Music is rarely performed with a computer-precise beat and tempo. Musicians aren't robots: they swing the beat sometimes. They use rubato. They change tempo. They change time signatures. As a result, you have to FIND those words and beats. It's not a situation where you can say, "There! I've found the duration of one beat! Now it's easy to find the rest of them!"
If you try it, you will be very disappointed.
Try finding the precise end of a piece of music that fades or ends on a big chord with a ring-out. You'll see that it's trial-and-error: what's the point where it becomes inaudible? It depends on how high your speakers are turned up. You might have them way up, you set an end point for the layer, and then you do a RAM Preview at a more reasonable volume. You might say, "Hey! The music ends before the layer ends!"... but you KNOW you set the layer's out point when the audio file goes silent.
AE has layer markers that can be used on an audio layer to mark beats, words, etc. They come in very handy.
I guess it comes down to this: because AE can do so much different stuff, there are very few automated procedures. Oh, Adobe tries with effects that convert audio levels to keyframes, but they're not 100% reliable... especially on something like a capella choral works. For true accuracy, you need find the timings yourself.
If you want something simpler, try a different application. But be prepared for lower level of accuracy.

How do you set the number of rows in a spreadsheet, so that even when you drag data in, in writes over those rows instead of adding a new row?

How do you set the number of rows you want in a spreadsheet, so that even when you drag data in, in writes over those rows instead of adding a new row?

After the discovery reported above, I filed this report :
Bug ID# 10073038
Summary:
When Numbers is used on a system with decimal comma a csv file may be good AND wrong
Steps to Reproduce:
With Numbers v2, you introduced an interesting enhancement.
In system using the comma as decimal separator, Numbers requires csv files using the semi-colon as values delimiter.
In fact it’s true if we OPEN the document dragging its icon on Numbers one or thru the open dialog.
This said.
(1) Drag and drop a csv built with the 'semi-colon' standard on a table or on a sheet
(2) Drag and drop a csv built with the 'comma' standard on a table or on a sheet
Expected Results:
Every normally constituted user assume that in
case (1) he will get a perfectly built table
case (2) he will get every cells of a row in a single cell
Actual Results:
In fact you forgot the drag and drop way of use and in
case (1) every values separated by semi-colon are inserted in a single cell
case (2) values separated by comma are correctly spread in a table
isn’t it ridiculous ?
Regression:
Except looking in QuickView to see which is exactly the structure of the file to decide the way we will insert it in a Numbers document, we may use an applescript fair enough to replace the semi-colons by TAB characters
or
to replace the commas by TABs and the decimal periods by commas
Notes:
While I am on this subject, I wish to make two proposals:
(1) It would be fine to format the date according to the ISO format year-mm-dd when you export a Numbers doc to csv.
Doing that, dates would be imported correctly in every countries.
At this time, on an English system, you export as mm/dd/year.
If the doc is open on a system using the format dd/mm/year, the results will be odd.
On a system using the format dd/mm/year, you export this way and so, if the doc is open on a system using the format mm/dd/year the results are odd too.
As every localized versions accept the ISO format (at least on entry), using it in the export scheme would give a correct behavior everywhere.
(2) It would be fine to add the format Tab Separated Values in the Export pane.
TSV + ISO date format would give documents opening flawlessly everywhere.
Yvan KOENIG (VALLAURIS, France) dimanche 4 septembre 2011 21:27:41
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community

How do you set the zoom level to Inherit Zoom for all bookmarks in a pdf?

How do you set the zoom level to Inherit Zoom for all bookmarks in a pdf?

beatngu13
I made an account just to "like" your comment and say that you are a god among men.
I've been searching for hours about how to make the zoom level persistent throughout following links in various PDF's I have, and most sources were saying to just buy acrobat pro and edit the bookmarks manually with it.
I saw that it was possible to write an application to change the property, and considered doing it after the only pre-existing custom application I could find was asking for $50.
Thanks to you, I no longer have to worry about re-zooming every time I click a bookmark, and I'm not out $50 or the time it would take to code an app myself!
From the bottom of my heart, thank you!

IPhone 4 - my phone doesn't "ring"... Speaker plays, it works on vibrate, and when you set the ringer, it will play. Just not when an incoming call comes in. Any thoughts?

iPhone 4 - my phone doesn't "ring". Speaker plays, it works on vibrate, and when you set the ringer, it will play. Just not when an incoming call comes in. Any thoughts?

Check the position of the mute switch. On the side, just above the volume keys.

How can I see the contents of the Firefox cache?

How can I view the contents of the Firefox cache?

Type '''about:cache''' in the URL bar and hit Enter.
Memory cache device - List Cache entries

Do you set the Firefox cache in bytes or kilobytes ? (about:config says integer)

Similar Messages

Maybe you are looking for