Do you think I have my DNS set up correctly?

Hi
I have bought a macmini server running the latest OSX software. I plan to host my own website and email from it. My ISP has given me a static ip address and I plan to set up my advanced DNS settings as follows, though I have used fake url & ip address for this question:
A Records: Host Name - myserver.example.com / IP Address - 215.40.70.84
DNS "MX" Records: Points to - 215.40.70.84 / Priority - 1
My question is, would the above enable my url to point to my new server and deliver emails to it?
Thanks!
Mark

- Could you expand on VPN end-point capabilities? I googled this but the explanations are a bit too technical for me. BTW I am running a 2wire BT2700 router.
VPNs can be forwarded via NAT (which gets ugly) to a server, or the gateway itself can include a VPN server.
If you connect directly to a server (port-forwarding everything at the gateway), you have to get all of the network traffic through NAT, and NAT can get ugly for a couple of reasons, and the server must be booted and working or you won't have an end-point for the VPN connection. (VPNs tend to seek security through various means including the use the originating IP address, and NAT seeks to mess with the originating IP address.)
With a VPN connection into a VPN server in the gateway, your local client is effectively similar to a client directly connected on the target network.
I'd be surprised if that 2Wire widget had a VPN server, but check the documentation. It does look to be possible to [switch (some?) 2Wire 2700 gateways into bridged mode|http://www.dslreports.com/forum/r21066151-2wire-2700HGB-bridge-mode-simple -tutorial] and place a server-grade firewall behind it. (A bridge is comparatively transparent to an IP connection.)
I often suggest a VPN, and for various reasons. Remote access into the LAN for maintenance and general access to LAN-local resources and particularly for various operations from untrusted networks, and as a path for remote support. AFP or SMB and other protocols are best kept behind the gateway, for instance. And the VPN scales as your network scales (you're able to get directly to any box, and not hopping around via an internal VPN server host), and a VPN-capable gateway keeps the riffraff at the edge of your network.
- I agree on split horizons. Do you know of any websites with user friendly explanations of this?
Questions or comments on [Mac OS X Server DNS configuration|http://labs.hoffmanlabs.com/node/1436] are welcome.

Similar Messages

Could someone who has dns set up correctly confirm that this test works?

The test that's here http://docs.info.apple.com/article.html?artnum=106798 says if you attempt to visit this link:
http://17.254.0.91
and you are taken to Apple's page then you probably don't have your DNS set up correctly.
Can anyone confirm, who has their DNS set up correctly, that attempting to visit that link does not work for them please?
TIA

Right, thanks for that info. I don't understand what all the code stuff is at all, but I do understand this:
If you type in the link stated and you are taken to Apple’s page then DNS IS SET UP CORRECTLY.
I'm still confused though. In that article/test in part of its explanation of DNS it says:
If you encounter some applications that continue to work, it may be because they are set up to go directly to an IP address, bypassing the need for DNS service.
Surely typing in http://17.254.0.91 into your browser is a way of making your browser access apple's site *bypassing DNS*? -- because you're using the IP address irradicating the need for changing a name into an IP address. The way to test if DNS is working, surely, is to try and access apple's site via www.apple.com? Not http://17.254.0.91.
Thanks.

Outlook 2010 Signature: Resizes GIF-pictures when you do not have 100% dpi set on display settings

Our automatic signature tool creates signatures for all our employees. The signature works fine until people with non-100% dpi setting on display (e.g. medium 125% or Larger 150% in Control Panel > Display) try to edit their generated
signature and saves. Suddenly the images get resized and blurry, even if it is not displayed as resized when save the updated signature.
It works fine to edit and save if you have display DPI set to 100%.
The company logo is 127x38 pixels, 2,15KB GIF file.
Is this a known bug or something else? I'm not sure its fair to blame the signature-tool as it works okay before the editor has been doing its stuff.
Another strange thing. If I have edited a signature in 125% and saves it. I send an email and the signature logo is blurry. But if I change display DPI to 100% and send another email (logoff and logon first to change dpi) then the logo is fine again.
Seems like the logo is bound to text size

Our company is having this exact same problem. We have Outlook 2010 SP2 and Windows 7 SP1 Enterprise. As the OP we have a signature creation tool that helps us create these HTML signatures dynamically. OP did you ever resolve this issue?
However, in our situation our logo gif image is already 96 DPI. Our HTML signatures work perfectly fine when Windows DPI is set to 100%. But, as soon as you go to 125% or 150% we have problems when saving email drafts and sending emails where the
logo increases in size.
Here is an example of the HTML code for my current signature. Any help on this issue would be appreciated. Is there a way to prevent Outlook from doing this when DPI is increase from default. We have a lot of users that need to increase
the DPI to see their PC better.
<HTML><HEAD><TITLE>GK Signature</TITLE>
<META http-equiv=Content-Type content="text/html; charset=windows-1252">
<META content="MSHTML 6.00.6000.16674" name=GENERATOR></HEAD>
<BODY>
<DIV align=left> </DIV>
<DIV align=left><FONT face="Arial" size="2" color="#002654">Ryan Lewandowski</FONT></DIV>
<DIV align=left><FONT face="Arial" size="2" color="#002654">Senior PC Specialist</FONT></DIV>
<DIV align=left> </DIV>
<DIV align=left><IMG alt="Godfrey & Kahn, S.C." hspace=0 src="http://www.gklaw.com/images/logos/gklogo.gif" align=baseline height=17 width=184 border=0></DIV>
<DIV align=left><FONT face="Arial" size="2" color="#002654">780 North Water Street</FONT></DIV>
<DIV align=left><FONT face="Arial" size="2" color="#002654">Milwaukee, Wisconsin 53202-3590</FONT></DIV>
<DIV align=left><FONT face="Arial" size="1" color="#002654">TEL</FONT><FONT face="Arial" size="2" color="#002654"> • 414.273.3500</FONT></DIV>
<DIV align=left><FONT face="Arial" size="1" color="#002654">DIR</FONT><FONT face="Arial" size="2" color="#002654"> • 414.287.9537</FONT></DIV>
<DIV align=left><FONT face="Arial" size="1" color="#002654">FAX</FONT><FONT face="Arial" size="2" color="#002654"> • 414.273.5198</FONT></DIV>
<DIV align=left><FONT face="Arial" size="1" color="#002654">EMAIL<FONT face="Arial" size="2" color="#002654"> • <A href=mailto:[email protected]>[email protected]</A></FONT></DIV>
<DIV align=left><FONT face="Arial" size="1" color="#002654">WWW</FONT><FONT face="Arial" size="2" color="#002654"> • <A href="http://www.gklaw.com">GKLAW.COM</A></FONT></DIV>
<DIV align=left><FONT face="Webdings" size="4" color="green">P </FONT><FONT face="Arial" size="1" color="green">Please consider the environment before printing this e-mail</FONT></DIV></BODY></HTML>

After shutdown I have to log in twice. The first time it starts to load, then goes black, then gives me login page again. Do you think I have a virus? Or is this Yosemite bug?

Just updated to Yosemite on my MBP. After shutdown now when I login, it starts the process (the bar starts to move), then the screen goes black, then it asks me to login again and this time it is a successful startup. Is this a Yosemite bug or do I have a virus? I also have some funny tiling on the screen at youtube and some other websites. Another bug?

Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Also see:
Reinstall OS X Without Erasing the Drive
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

Do you think this SQL Server exam answer is correct?

Recently I have come across below exam questions for SQL Server 2012.
You administer a Windows Azure SQL Database database named Human_Resources. The database contains 2 tables named Employees and SalaryDetails.
You add two Windows groups as logins for the server:
CORPEmployees – All company employees
CORPHRAdmins – HR administrators only
HR Administrators are also company employees.
You need to grant users access according to the following requirements:
CORPEmployees should have SELECT access to the Employees table.
Only users in CORPHRAdmins should have SELECT access to the SalaryDetails table.
Logins are based only on Windows security groups.
What should you do?
A.
Create a database role called Employees.
Add CORPEmployees to the db_datareader role.
Add all company employees except HR administrators to the Employees role.
Deny SELECT access to the SalaryDetails table to the Employees role.
B.
Create a database role called HRAdmins.
Add all company employees except HR administrators to the db_datareader role,
Add all HR administrators to the HRAdmins role.
Grant SELECT access to the SalaryDetails table to the HRAdmins role.
Deny SELECT access to the SalaryDetails table to the db_datareader role.
C.
Create two database roles: Employees and HRAdmins.
Add all company employees to the Employees role.
Add HR administrators to the HRAdmins role.
Grant SELECT access to all tables except SalaryDetails to the Employees role.
Grant SELECT access to the SalaryDetails table to the HRAdmins role.
Deny SELECT access to the SalaryDetails table to the Employees role.
D.
Create a database role called Employees.
Add all HR administrators to the db_datareader role.
Add all company employees to the Employees role.
Grant SELECT access to all tables except the SalaryDetails table to the Employees role.
Deny SELECT access to the SalaryDetails table to the Employees role.
In the website where I saw this question, the correct answer is provided to be "D". But I definitely think it should be "A" not "D".
The answer is simple. In "D", "Add all company employees to the Employees role" will also add "HRAdmins" to the "Employees" role because the question specifically
indicated the HRAdmins are also employees. So later on "Deny SELECT access to the SalaryDetails table to the Employees role" will cause "HRAdmins"
to be denied for selecting from "SalaryDetails" table, too.
Please let me know if my understanding is right?

The question mentions there are only 2 tables in this database, Employee and SalaryDetails, and the requirements mention permissions on only these. Only GRANT (no DENY) is needed to provide these permissions so the best answer is a modified version
of C:
Create two database roles: Employees and HRAdmins.
Add all company employees to the Employees role.
Add HR administrators to the HRAdmins role.
Grant SELECT access on the Employees table to the Employees role.
Grant SELECT access on the SalaryDetails table to the HRAdmins role.
One of the things I don't like about test questions like this is that they are sometimes outright wrong or require clarification to make the proper decisions. One cannot take then too literally but it's sometimes hard to read between the lines to comprehend
the purpose of the question.
It is common in the real world to get ambiguous or improperly stated requirements but we can at least ask for clarification. A good DBA might consider this database could contain additional tables in the future, but should be wary about granting
permissions in advance (e.g. with fixed database role membership or granting permissions at a higher level) on those before they are created without knowing what sensitive data they might contain.
Dan Guzman, SQL Server MVP, http://www.dbdelta.com

Do You Think Software Developers Are Obligated To Have A Windows 10 Build?

I don't think they have an obligation, but there can be a risk of losing customers if they don't keep current.

So I'm sure like many of you, I'm a part of a few different communities and forums. One that I'm a part of reacted to an announcement by a software developer that they were waiting 6 to 9 months to get a Win 10 version of their software ready. General reaction was not positive.
So it got me thinking, do you think Software Developers have an obligation to support a new OS like Windows 10 from the get-go? Or do you think developers have the right to wait to see how a new OS runs first before releasing a public build?
This topic first appeared in the Spiceworks Community

How do you throw attribute level exception in setter for VORowImpl

Hello All,
I am trying to perform a very basic view object extension in iProcurement. All I want to do is throw an attribute level exception (or row level...whichever I can get to work). The code runs, however, the page displays the attribute error for all rows, and, it should only be displaying it for the row that had the validation error.
I next simplified the test by extending the iProcurement view object, but, not generating any VORowImpl classes. This way, I am using only Oracle code. Same result...if I purposely enter a bad number on one row, the result when I hit the continue button is that all rows get flagged with the error.
Without the substitution, the error is displayed correctly for only the row that caused it.
Are there any known issues using OAAttrValException or OARowValException when substitution is made on a view object?

SOLVED -
I found the issue.
JDeveloper Version 9.0.3.5 appears to have a 'bug' I may have found. When creating a new View Object, the key attribute(s) that are pulled in from the view object you are extending appear to all have the 'Key Attribute' checkbox checked. (View object I am extending is not based on EO objects). However, if you inspect the xml file for the new view object, you will see that the wizard did not save off the value for the key attributes in the "KeyAttributes" tag usually found at the end of the xml file, such as:
<AttrArray Name="KeyAttributes">
<Item Value="RcvTransactionId" />
</AttrArray>
You think the key attribute is set because the GUI displays the checkbox.
Closing the project and re-opening, which causes the xml fiel to be read again, will refresh the checkbox so that it is unchecked. Checking and re-saving does the trick.
Without the key attribute set, any calls to OAAttrValException with parameter getKey() break as getKey() returns null. Subsequently, the exceptions thrown to the user on the screen are improperly displayed.
Everything works great now! I just have to remember to go back and check any 'Key Attributes' on future View Object extensions.

Family Data Pricing (What do you think would be fair?)

Currently people are getting ripped off for $30 data plans and I assume many use under 1GB per month. Because of this many cannot afford data plans for their family.
I use around 150MB 3G each month, the rest is over WIFI.
Questions:
1. How much data do you use each month? (Found through MyVerizon)
2. How do you think Verizon is going to set up family data?
3. How much should a family of 4 pay for family data if each of them gets 2GB each considering what I said above about many not even using 1GB (although is is probably rapidly changing with video calls and 4G LTE). I still think people on average use less then 2GB.
I would have to say $70 for 8GB for the family to share. $17.50 per person. At that figure I think we would start to see a lot more smartphones being sold but I'm sure my figure is really low by Verizon's standard.
So, what do you all think Verizon will do with pools of data? Speculate on prices and amount of data.

Verizon has a $20/300MB data plan, which I have with an iPhone.
1. I used 75MB or less each month (I have used 75MB once).
2. Verizon is either going to add it as an option in current shared plan or create a separate data share plan (I''m thinking the later).
3. I would prefer not paying for data and just using WiFi, but I would say for a family/share plan no more than $20/GB on the account level.

The double click is not working so cannot navigate. Do you think this is a fault or have the setting been changed

I am new to apple and found that the double click on my MacBook air is not working so stuck on one screen and can not move. Is there another way other than double clicking to move between screens? Do you think this is a fault or just that the settings have been changed
Thank you

It is probably set too fast or too slow. Go to System Preferences from the Apple menu. Click on trackpad and adjust the double-click speed here.

9i app 9.0.2.01?Does the reverse DNS lookup have to be set up for a FQDN

HEy guys:
I'M ALWAYS GETTING STUCK IN THE SAME PLACE WHEN I AM TRYING TO INSTALL 9I APPSERVER 9.0.2.0.1 REL 2. ITS ALWATYS HAPPENING AT THE oRACLE db CONFIG assistant i have set up my host file and when i ping -a servername i get the full reply back ex. servername.domain.com but now when i ping -a 111.111.111.111 i do not get the host name back this is b/c i do not have the PTR record set up. Do i have to have a reverse dnslookup working for what oracle is stating is "FQDN" and not just the dns lookup working...how is oracle installer looking at this piece.
that is the only i see that i don't have when i look at my computer name (by the way this is a winnt environment)in properties it has the FQDN. i also have set up the host file correctly resembling 111.111.111.111 servername.domainname.com servername oracleinstall. What else am i missing here guys? thanks for the help in advance
regards,
robert

Actually, these issues were/are documented - see the addendum. Also, the install guide details which files need to be updated with the FQDN/IP.
Though it does not have to be setup in your DNS server (say if you are just doing it on a single tier to test), those machines which are looking to connect to it would need to have the proper additions to the hosts file as well.
As for why the 'non-default' http ports, this was a result of Unix security. Non-root users cannot start processes using ports below a specific range. As a result, oracle defaults them to a higher number allowing your oracle account whom lacks root access to start the http service.
As for non-oracle responses, this isn't really an official forumn. I believe those oracle peeps who do respond here are doing so on their own. If you need official/immediate responses, then i would recommend using metalink for an itar or the metalink forums.
Now on to Robert's second question. See metalink Note:209114.1: How to Change the Port used for Oracle 9iAS Portal 9.0.x. If you don't have access to metalink, let me know and I can forward the note or post it here.
Have fun!

I have an I phone 4s and I have many contacts in my phone. However, whne my phone rings or I receive a text, the phone does not show the name of the contact person only the phone number. I have checked every setting I can think of ?

I have an I phone 4s and I have many contacts in my phone. However, when my phone rings or I receive a message. The phone does not show the name of the caller. It only shows the phone number that is calling. I am sure this is a setting problem, but I have checked every setting I can think of. Any suggestions??

If you are a Verizon user try this:
Open the phone and dial *228. This is a Verizon over-the-air programming number.
When the system answer press 1 for "Program or activate your phone"
Wait for the call to disconnect. You should get a prompt stating "Settings updated."
Double tap the Home button to bring up the recently used apps list at the bottom. Locate the Phone, Message, and Contacts apps, swiping if necessary, and press and hold until they jiggle then press the red minus sign to stop them.
Wait a 3-5 minutes.
Try your phone again and see if it's fixed.

FF Privacy and FF Sync : FF Sync keeps asking me to 'set up...' becuase [ i think] I have Privacy Mode on and therefore all the cookies are deleted. Is this correct ? Can FF Privacy 'understand' that Sync should be allowed ?

FF Privacy and FF Sync : FF Sync keeps asking me to 'set up...' becuase [ i think] I have Privacy Mode on and therefore all the cookies are deleted. Is this correct ? Can FF Privacy 'understand' that Sync should be allowed ?
== This happened ==
Every time Firefox opened
== From Load of FF Sync

''guigs2 [[#answer-672422|said]]''
<blockquote>
NoScript stops cookies, please disable this addon/extension as well as make sure that the language en-us is installed.
# 1) Open up the Firefox Preferences tab. You can do this by typing about:preferences in the URL bar.
# 2) Click "Content"
# 3) Next to "Languages", click "Choose"
# 4) Select "English/United States [en-us]", click "Add"
# 5) re-open "about:accounts"
# 6) Click "Get Started"
</blockquote>
Thank you for replying. Unfortunately, I already did all of these things. As you can see from the below screenshot, the language is already set. Also, this screenshot was taken in Safe Mode, so NoScript is not enabled. About:accounts still says I need to enable cookies for some reason. So, this solution didn't work....

Hi there, I have just bought an ipad4 but it will not connect to my internet. I have tried every suggestion going to no avail. My netgear DG834g router is fairly old , do you think this is the problem? I am at a loss now and very frustrated!

Hi there, I have just bought my first ipad4 and have spent all weekend trying to connect to the internet. I have tried all Apple suggestions to no avail
. My Netgear DG834g router is a few years old now. Do you think this may be the problem? Do they have compatibility issues after a while? My ipad upgrade is IOs 6. I am at a loss what else to do and needless to say extremely frustrated!
Thanks.

First check that your router has its latest firmware.
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Since you are a new iPad user .....
Complete guide to using iOS 6
http://howto.cnet.com/ios-6-complete-guide/
Guide to Built-In Apps on iOS
https://sites.google.com/site/appleclubfhs/support/advice-and-articles/guide-to- built-in-apps-ios
You can download a complete iOS 5 iPad User Guide and iOS 6 iPad User Guide here: http://support.apple.com/manuals/ipad/
Also, Good Instructions http://www.tcgeeks.com/how-to-use-ipad-2/
Apple - iPad - Guided Tours
http://www.apple.com/ipad/videos/
Apple iPad Guided Tours - Watch the videos see all the amazing iPad apps in action. Learn how to use FaceTime, Mail, Safari, Videos, Maps, iBooks, App Store, and more.
http://www.youtube.com/watch?v=YT2bD0-OqBM
http://www.youtube.com/watch?v=ROY4tLyNlsg&feature=relmfu
http://www.youtube.com/watch?v=QSPXXhmwYf4&feature=relmfu
How to - Articles & User Guides & Tutorials
http://www.iphone-mac.com/index.php/Index/howto/id/4/type/select
iPad How-Tos http://ipod.about.com/lr/ipad_how-tos/903396/1/
You can download an iPad User Guide to the iPad from the iTunes store.
 Cheers, Tom

Hi I am currently subscribed to PS CC but I don't think I have the latest version. I beleive this because I don't get the new welcome screen and don't new feature like the structure and color setting in the content aware patch tool. I have checked for u

Hi I am currently have a subscription to PS CC but I don't think I have the latest version. I believe this because I don't get the new welcome screen and don't have new features like the structure and color setting in the content aware patch tool. I have checked for updates and it tells me I have the current version. I check in PS I have version 14.2.1. I also have CS6 installed on my PC, could this be somehow be doing something or am I doing something wrong. Would anyone have any suggestions.

It's under "Find New Apps". You have to scroll down to see it.

What happens if you think you have two apple IDs?

I think I have two apple IDs. One I created many years ago with an IPod, but I don't know what that one is now. It has most of my music attached to it. Now I have one with my email that doesn't have all that music and I can't get the music to attach to it??

Content from the iTunes Store is permanently bound to the Apple ID through which the content was purchased. If you used two different Apple IDs, you'll need to use both IDs to authorize computers, view your purchase history, or re-download items. If you can't remember an ID or its password, try this page:
https://iforgot.apple.com
Regards.

Do you think I have my DNS set up correctly?

Similar Messages

Maybe you are looking for