Do you think this is an improvement?
over the previous forum format?
Personally I like the layout, but besides the lay-out, they need to get their acts together. The site is slow and I am getting sporadic errors ( namely err 500). What happen to the search button? What use of a forum if you can't search for answers or similar problems which someone may have posted already. Another functionality they should add is the Edit button. It would be nice to go back and correct your mistake.
Similar Messages
-
Pls take note that my IPad 3 used to find my printer HP wireless D110. The only thing that I did was to update to IOS 7. Do you think this is the reason why my iPad cannot find my wireless printer?
1. Turn the router, iPad and printer off
2. Turn on the router and then wait 30 seconds
3. Turn on printer and then wait 30 seconds
4. Turn on your iPad and test print. -
I get this error: "It appears you're not allowed to view what you requested. You might contact your administrator if you think this is a mistake.", when I try to view this Thread: http://talk.sonymobile.com/thread/60272
Give me access to the Thread and explain me where I broke the forum rule... First Sony sells me phone by deception and when I question Sony, I get kicked out of the Thread (by Sony hired Goons)....respected admin,
when i connect my mobile with pc companion there's a update of 15.3.A.1.12 for Xperia L. But as usual for all user the update from pc companion becomes very slow while the update from update center from mobile means wireless update is comfortable and fast. But there is no update (15.3.A.1.12) seen in update center.
and as in the following link (of sony) its still showing 15.3.A.0.26..
Can you say how long will it take for the update (15.3.A.1.12) to come to the update center (wireless update) ?
and is the update 15.3.A.1.12 officially out..and if no how much time it will take?
Please do reply asap as there are many problems happening in .26 update. -
Hi guys,
I posted a question which was reviewed and published, now i am not able to see the quesrion and the replies anymore.
I am getting this message "Access to this place or content is restricted. If you think this is a mistake, please contact your administrator or the person who directed you here."
Can you please help.
Thank you
AndyYou get this due to your newer status in forum, most of the contect needs to be reviewed and approved by one of us ie modertors of this space
-
I tried to post a question on SCN and I too got the following error:
Access to this place or content is restricted. If you think this is a mistake, please contact your administrator or the person who directed you here.
Does that mean my question is rejected ? or is it being moderated ?This is because your new discussion thread was rejected. You should see feedback from the moderation at http://scn.sap.com/actions/notifications
-
Hello,
I am not able to find the discussion, as it is showing error message
Access to this place or content is restricted. If you think this is a mistake, please contact your administrator or the person who directed you here.
The thread link is mentioned below.
http://scn.sap.com/thread/3704991
ThanksHi Sanjana,
I think you may raised issue about CRM Data source enhancement.
if yes then that might be hidden by moderator as per SCN rules. Mean its alerted by scn experts and moderators will take action as epr scn rules.
Data source enhacement have been discussed mnay times on scn.
please go thru sample existing codes, apply your lgoic and follow it.
Later you can do syntax check and do the debeug with help of abap expert.
Thanks -
I am new to apple and found that the double click on my MacBook air is not working so stuck on one screen and can not move. Is there another way other than double clicking to move between screens? Do you think this is a fault or just that the settings have been changed
Thank youIt is probably set too fast or too slow. Go to System Preferences from the Apple menu. Click on trackpad and adjust the double-click speed here.
-
My I mac screen had a small green light on the lower left. on a black screen. the screen seemed unresponsive. When I re-srted the bong sounds but the wite screen never shows the apple - What do you think this means?
Welcome to the world of Mac. Some ‘light’ reading to help the transition. I don’t recommend trying to get through all of this at once.
A guide for switching to a Mac
Anatomy of a Mac
Mac Basics—Tutorials on using a Mac
Mac OS X keyboard shortcuts,
Mac Basics – Mac Find Out How
Mac Basics – Switching From Windows
Mac OS FAQ
MacTips,
Quick Assist
Switch Basics
Switching to Mac Superguide
Switching to the Mac: The Missing Manual, Mountain Lion Edition
Take Control E-books
Welcome to the Switch To A Mac Guides -
Hi there, I have just bought my first ipad4 and have spent all weekend trying to connect to the internet. I have tried all Apple suggestions to no avail
. My Netgear DG834g router is a few years old now. Do you think this may be the problem? Do they have compatibility issues after a while? My ipad upgrade is IOs 6. I am at a loss what else to do and needless to say extremely frustrated!
Thanks.First check that your router has its latest firmware.
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Since you are a new iPad user .....
Complete guide to using iOS 6
http://howto.cnet.com/ios-6-complete-guide/
Guide to Built-In Apps on iOS
https://sites.google.com/site/appleclubfhs/support/advice-and-articles/guide-to- built-in-apps-ios
You can download a complete iOS 5 iPad User Guide and iOS 6 iPad User Guide here: http://support.apple.com/manuals/ipad/
Also, Good Instructions http://www.tcgeeks.com/how-to-use-ipad-2/
Apple - iPad - Guided Tours
http://www.apple.com/ipad/videos/
Apple iPad Guided Tours - Watch the videos see all the amazing iPad apps in action. Learn how to use FaceTime, Mail, Safari, Videos, Maps, iBooks, App Store, and more.
http://www.youtube.com/watch?v=YT2bD0-OqBM
http://www.youtube.com/watch?v=ROY4tLyNlsg&feature=relmfu
http://www.youtube.com/watch?v=QSPXXhmwYf4&feature=relmfu
How to - Articles & User Guides & Tutorials
http://www.iphone-mac.com/index.php/Index/howto/id/4/type/select
iPad How-Tos http://ipod.about.com/lr/ipad_how-tos/903396/1/
You can download an iPad User Guide to the iPad from the iTunes store.
Cheers, Tom -
why do i see It appears you're not allowed to view what you requested. You might contact your administrator if you think this is a mistake." though I have bought an iMac and have a valid Apple ID
Rattlehead18 wrote:
That means Apple banned you from that thread cause they think you speak the truth
This is complete rubbish. Please don't post misinformation - new users find the forums confusing enough without you adding to it.
When you see that notice it means that the thread or User Tip has been removed. A User Tip may have gone out of date and been removed at the author's request. With a thread it means that someone, usually the original poster, has violated the Terms of Use by ranting, spamming, personal abuse or other content which is not allowed. Consequently anyone else who tries to view that thread will see the message quoted above, which is a standard message in the forum software; the 'contact an administator' bit is irrelevant. -
Do you think this is the logic board?
Ok, So I'm sitting in psychology and the computer freezes and the video becomes distorted (like the Photoshop wind filter) little lines going everywhere. I then held the power button and it shut down. Then I tried to boot it, but nothing.
Later it works OK, but do you think this is the logic board?
Will it get worse?
And finally, Do you think I am eligible for a logic board replacement?
Serial: UV3283xxxxxGah, Sorry forgot to mention in the message i have an ibook.
You didn't need to say that you have an iBook because it says it in your system configuration at the bottom of the screen I just thought that I'd mention my experience because it was a bit similar to yours.
I definately think that it is worth getting it checked out. Maybe just drop it off at an Apple store and ask them to do some tests on it to see if the logic board does have a problem. If you are eligable for the logic board replacement then it's definately worth looking into. Often, intermittent problems like this can turn into more serious ones like mine.
I personally would not leave it down to chance.
Good luck
<hr>Sam -
Do you think this is the bug in 1.5?
I have this applet and the tooltip for second button does not appear after clicking on first button. It only happens in java 1.5. Do you think this is the bug or I am doing something wrong. this is the code
/*<HTML>
<HEAD>
<TITLE> A Simple Program </TITLE>
</HEAD>
<BODY>
Here is the output of my program:
<APPLET CODE="HelloWorld1" WIDTH=350 HEIGHT=325>
</APPLET>
</BODY>
</HTML>
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.applet.Applet;
public class HelloWorld1 extends JApplet implements ActionListener {
CardLayout c = new CardLayout();
JPanel lslayout = new JPanel();
JButton n = new JButton("first");
JButton n1 = new JButton("second");
public void init() {
getContentPane().setLayout(c);
getContentPane().add("message", n);
getContentPane().add("message1", n1);
n.addActionListener(this);
n.setToolTipText("firs tooltip");
n1.setToolTipText("second tooltip");
public void actionPerformed(ActionEvent e) {
c.show(getContentPane(), "message1");
}I have rewriten it with FlowLayout() and it still does not works. Code is below. One thing i noticed.If I minimize my browser window the tooltip appears. Does anyone knows which method the browser calles after minimizing.
public class HelloWorld2 extends JApplet implements ActionListener {
JPanel panel = new JPanel();
JPanel panel2 = new JPanel();
JPanel panel3 = new JPanel();
JButton n = new JButton("first");
JButton n1 = new JButton("second");
public void init() {
panel.setLayout(new FlowLayout());
panel2.setLayout(new FlowLayout());
panel.add( n);
panel2.add(n1);
getContentPane().setLayout(new FlowLayout());
getContentPane().add( panel);
n.addActionListener(this);
n.setToolTipText("firs tooltip");
n1.setToolTipText("second tooltip");
public void actionPerformed(ActionEvent e) {
getContentPane().removeAll();
setEnabled(false);
setEnabled(true);
getContentPane().add( panel2);
panel2.revalidate();
panel2.validate();
validate();
repaint();
} -
Do you think this is a good monitor??
Do you think this is a good monitor?? I want to keep the cost under control. I edit wedding videos. Yes the colors & blacks must be accurate but dont want to spend more than this. These were rated very high. I want to by 2 for a dual setup. CS5 PC based.with GTX570 2.5 G video card. 24 gigs ram, 6 core.
ViewSonic VX2739WM 27-Inch 1920x1080 Full HD Monitor
http://www.amazon.com/ViewSonic-VX2739WM-27-Inch-1920x1080-Monitor/dp/B003GBRXKU%3FSubscri ptionId%3D14H876SFAKFS0EHBYQ02%26tag%3Dbrandonhubpag-20%26linkCode%3Dxm2%26camp%3D2025%26c reative%3D165953%26creativeASIN%3DB003GBRXKU
OR THIS ONE:
Viewsonic VX2753MH-LED 27-Inch LED Monitor
http://www.amazon.com/gp/product/B004KCI80I/ref=olp_product_details?ie=UTF8&me=&seller=colors & blacks must be accurate
Don't rely on a computer monitor for that. Best to use a properly calibrated external TV (or production monitor) of the highest quality you can afford.
For good black levels and accurate colors, both Panasonic and Samsung offer good options in their plasma lineups. -
Tell me if you think this looks like SIN CITY!
I made this in After effects, but the colors didnt look good at all, so I brought it into motion to play around with, and with various blend modes, I made this look like the SIN CITY.
I multiplied the clip, with the one on the bottom having a glow, blur and a light rays filter, then the cllip in the top had its opacity dropped to let some of the bottom clip shine through.
Let me know what you think! This was a test for a short that I want to make...
here is the link:
http://www.mideagenius.com/sincity2.movno CG, I dont know any 3d programs but im trying to learn lightwave. i used after affects, and took pictures of the sides of buildings, then assembled them into blocks. Then i duplicated those and comped them into another comp, and made a row of about 7 buildings. then using the z, y, a x scales, i made the buildings different sizes. then i duplicated the row about 5 times and made the city type thing,animated the camera and there you go. then i brought the rendered clip into motion to mess with the color and make it look sin city'ish.
Im still messing with it to try and cut down on the pixel zipper jaggy edges. ANy ideas patrick on how to make the lines sharper? Thanks. -
I understand that the mods here can't possibly reply to everyone who has a post pulled for ToU. One can vaguely try to contact an administrator indirectly, perhaps, by posting here. (When this takes the form of a "why was my post pulled" post, this usually starts a discussion of some kind, which may or may not have any value, but which almost always fails to elicit any direct participation of the Hosts, and gives the impression, at least, it's being completely ignored by them.)
Since there is no way of directly contacting an administrator, either for ToU or for any other reason, which this appears to suggest is possible, why not just get rid of it?>...although the OP's question still remains....
I'm now referred to as the OP?
If you got the email with content for the "final straw" post, which was mine, then you will know what I wrote. I already had one post pulled in that thread for a ToU and I did receive the obligatory email for that. I did not receive an email for the "final straw" post. Just the entire thread got pulled almost immediately at that point.
Everything I am writing here now is deliberately being veiled and obscured to the limit possible without losing all meaning and just turning this into noise. No one who didn't receive that email content for my post will have any very clear idea what this is all about.
My "final straw" comments related to several things: some copyright issues concerning the site under discussion; the ToU of that site as, in fact, necessarily prohibiting even the linking of content from that site, and an attempt to differentiate, in general, between what is illegal and what is a violation of the ToU, and not illegal, as such, for any service on any site. I'm not opening all of that up again here, since whatever it was I wrote will probably just get this post pulled.
All I can say is I attempted assiduously to stay clear of the Apple ToU violation for which I was cited by the Apple email in my earlier post which was pulled -- or any ToU violation, for that matter. I was not discussing Apple's policies, nor was I giving "forbidden" instructions. That the entire thread got pulled has to make me think that straying into those waters -- perhaps, my discussion of copyright issues in regard to the behavior of the other site under consideration, especially, made someone very nervous. Or maybe it was something other than that. But I will never know.
In any case, "You might contact your administrator if you think...." is genuinely silly, and unless it's somehow ineradicable from the Jive template -- I see now Meg has given that as a possible reason -- I can't see why it shouldn't be removed.
Message was edited by: WZZZ
Maybe you are looking for
-
How do I let other users on my MacBook Pro update apps that I've downloaded?
I recently left a position as an IT at a school district where I was put in charge of all Mac products district wide. Most of the important apps, such as Apple Configurator or Remote Desktop, were downloaded using a district Apple ID, but many of the
-
How to restore iTunes library from TimeMachine external hard drive backup after clean install
I was not able to solve this problem, hence I decided to open this discussion. 1. Recently, I clean installed Yosemite so my new Mac is completely empty. 2. I have my time machine backup on my eternal hard drive and would like to restore only specifi
-
Found Practically new iPod Touch 5th Gen. - I'm throwing it away
Hi, I've read several of these same questions: Someone finds an iSomething, can't find owner, and wants to get it out of "disabled" mode and use it. And then they get accused of being a criminal. I have an iPhone 6, iPad 2, iPhone 4, and my son an
-
How can I set the 'Arrange By' state of each folder independently?
This is a particularly useful feature of XP & later systems - setting Arrange By of an active folder gives it that state until it is individually changed. This streamlines contents access because, for example it is frequently faster to identify appli
-
I have created a proxy for a ABAP written by us. It has been created using SAP .Net Connector 2.0. When I call the method from the proxy using direct reference it returns me the proper data. But when I call the same method in the proxy by using refle