Do You Think.
Putting Alot Of Apps On An iphone Will Make It Crash? I Downloaded 65 For Free And Plan On Putting Them All On There. Do You Think It Will Mess It Up?
oh, and its a good idea to restart the phone after loading the apps on, some dont work if you dont (monkeyball wouldnt load until i restarted).
Similar Messages
-
Did you know that Verizonwireless is saving your checking account information when you pay your bill by check and then making it part of your "MyVerizon" without you adding it? This means of course if they get hacked that information could be compromised. What do you think of this?
Credit card and debit card and checking and savings information is encrypted so it is possible to be hacked, but the odds are greater to get hit by the Love Boat then to have a wide scale hack.
Oh yes they do happen, Bank of America, Chase, Citibank, Target and quite a few others. But in all the years I have paid my invoice with saved card information I never been hacked.
You use good passwords and the risk is minimal.
Good Luck -
Do you think edge will work in Mexico? Internet?
I was wondering if AT&T's edge network will work in Mexico so I can get on the Internet and check my mail?
Do you think it will? How does edge really work? Is it like cell phone service?
Hope someone has some good news!
Thanks,
SamThe post here https://discussions.apple.com/thread/5090512?start=0&tstart=0 says he bought in in the US and it worked. I would assumed unlocked means unlocked no matter where.
-
Pls take note that my IPad 3 used to find my printer HP wireless D110. The only thing that I did was to update to IOS 7. Do you think this is the reason why my iPad cannot find my wireless printer?
1. Turn the router, iPad and printer off
2. Turn on the router and then wait 30 seconds
3. Turn on printer and then wait 30 seconds
4. Turn on your iPad and test print. -
My IPod no longer shuffles songs within playlists that are clearly set to shuffle. It is about 3/4 full so I thought of maybe compressing the files to get more space. Do you think that is the problem and if that might help?
Storage space on the iPod would not affect shuffled playlists or playlist shuffling, though substantially full iPods may wind up skipping songs on larger playlists after a while, and require a restart. As for compressing the files themselves, you can automatically re-encode files to a lower bitrate by checking the box on the summary page when your iPod is connected to your PC/Mac.
As for the shuffle problem, after restarting your iPod (hold the center button and Menu for a few seconds, until the Apple logo appears), make sure you're telling the iPod to shuffle the songs in a playlist by repeatedly clicking the center button until the Suffle Menu comes up, then scroll to the right to turn it on. From that song forward, the playlists' contents should be shuffled every time the playlist ends, or is accessed from a new song.
Shuffle does sometimes turn itself off, I've found, so double-check the setting is still on. Also, iPods shuffle by randomly assigning a playlist order for your songs, which is different from traditional shuffle (on, say, iTunes or Windows Media Player, where the new song is determined at random upon the current track ending. The iPod only chooses a random order of songs when you shuffle, to conserve battery life and queue up songs coming up on the playlist in the event of a shock). -
My new iPod touch is getting really warm while I use it. Is it normal? I mean, I have silicone cover, maybe it's the reason for iPod being so HOT?... How do you think, is it too important to have a cover on the iPod? How about screen protector? :S
My new iPod touch is getting really warm while I use it. Is it normal? I mean, I have silicone cover, maybe it's the reason for iPod being so HOT?... How do you think, is it too important to have a cover on the iPod? How about screen protector? :S
-
Which do you think; Windows 7: 32-bit / 64-bit, (plus unused RAM issues) is best for video editing?
Hi there!
Just received delivery of a Lenovo G550 with the following spec:
2.2Ghz Core 2 Duo,
4GB (DDR3 - 1066Hz) RAM,
500GB HDD
NVIDIA GeForce G210M (512MB)
Windows 7
The entire purpose for buying this laptop, was for video editing and it is the best spec I could find for my needs and budget.
So what's the problem?
1) Windows 7 is installed as 32-bit, not 64 bit. Why is this? I was given no choice in this decision.
2) Only 2.96GB of that juicey RAM is being used by Windows 7. I need as much RAM as possible for video editing.
3) Lenovo sent NO install disc. - When I eventually get a virus or my HDD fails, I have NO WAY to clean install the very product I have just purchased! (A laptop with Windows 7 OS).
Considerations:
As I understand it (please comment if there are alternative views on this); The 64-bit architecture is only useful for compatible software which has been designed to run 64-bit.
The video editing software I use is "Sony Vegas Movie Studio HD 9.0"
The suggested problems with Windows 7 run as 64-bit include:
* Possible lack of driver compatibility support.
* Possibility of 32-bit programs running SLOWER in 64-bit environment, than their native 32-bit environment.
* Higher running temperatures & processor cooling issues.
* No performance gains for all other programs running as 32-bit (email, internet browser, etc).
The suggested advantages with Windows 7 run as 64-bit could be:
* Full utilisation of the 4GB RAM. (Presently limited to 2.96GB)
* Faster rendering and video editing tasks in 64-bit environment.
Questions:
4) How can I get an install disc for Windows 7? Shouldn't this come with the computer?
5) Do you think the potential hassle and architecture conflicts are worth suffering, to get the reported performance gains of 64-bit architecture and the remaining unused RAM?
Thank you for any help and advice!contact lenovo support line for windows 7 dvds, but make sure if they send recovery dvds instead of windows 7 dvd.
most of people are having trouble with installing windows and drivers, so companies has found as this as solution to send recovery dvd -if asked- or using hidden partition to recovery system - like one key recover - instead of.
but if you ask me, they need to send dvds.
i'll contact the mods and admins about this issue, please stay connected to this post.
anyp wrote:
the member should contact lenovo, as of recently users are entitled to request media for 32 / 64 bit if they purchased one and want the other. -
Oracle Security : what do you think about the following policy violation ?
If you install OEM10, you will be able to see if you violate some security guidelines :
Interresting is revoking UTL_FILE from public, which is critical. Also revoke UTL_TCP and UTL_SMTP. This is going to upset an expert I know...
Take care about the failed login attempts. If you set it to 10 to the default profile, and if your DBSNMP password is NOT the default password, then Oracle will lock your account after node discovery!
In Solaris, you can disable execution of the user stack with the system parameters set noexec_user_stack=1
set noexec_user_stack_log=1. I did not find how to do it on AIX. However, those settings may have side effects.
About the ports, it complains about open ports, even if this is the port oracle listener is using! Simply ignore most of the violations there.
About JAccelerator (NCOMP), it is located on the "companion" CD.
Ok, Waiting for your feedback
Regards
Laurent
[High] Critical Patch Advisories for Oracle Homes Configuration Host Checks Oracle Homes for missing critical patches
[High] Insufficient Number of Control Files Configuration Database Checks for use of a single control file
[High] Open ports Security Host Check for open ports
[High] Remote OS role Security Database Check for insecure authentication of remote users (remote OS role)
[High] EXECUTE UTL_FILE privileges to PUBLIC Security Database Test for PUBLIC having EXECUTE privilege on the UTIL_FILE package
[High] Listener direct administration Security Listener Ensure that listeners cannot be administered directly
[High] Remote OS authentication Security Database Check for insecure authentication of remote users (remote OS authentication)
[High] Listener password Security Listener Test for password-protected listeners
[High] HTTP Server Access Logging Security HTTP Server Check that HTTP Server access logging is enabled
[High] Web Cache Access Logging Security Web Cache Check that Web Cache access logging is enabled
[High] Web Cache Dummy wallet Security Web Cache Check that dummy wallet is not used for production SSL load.
[High] HTTP Server Dummy wallet Security HTTP Server Check that dummy wallet is not used for production SSL load.
[High] Web Cache owner and setuid bit' Security Web Cache Check that webcached binary is not owned by root and setuid is not set
[High] HTTP Server Owner and setuid bit Security HTTP Server Check the httpd binary is not owned by root and setuid bit is not set.
[High] HTTP Server Directory Indexing Security HTTP Server Check that Directory Indexing is disabled on this HTTP Server
[High] Insufficient Redo Log Size Storage Database Checks for redo log files less than 1 Mb
[Medium] Insufficient Number of Redo Logs Configuration Database Checks for use of less than three redo logs
[Medium] Invalid Objects Objects Database Checks for invalid objects
[Medium] Insecure services Security Host Check for insecure services
[Medium] DBSNMP privileges Security Database Check that DBSNMP account has sufficient privileges to conduct all security tests
[Medium] Remote password file Security Database Check for insecure authentication of remote users (remote password file)
[Medium] Default passwords Security Database Test for known accounts having default passwords
[Medium] Unlimited login attempts Security Database Check for limits on the number of failed logging attempts
[Medium] Web Cache Writable files Security Web Cache Check that there are no group or world writable files in the Document Root directory.
[Medium] HTTP Server Writable files Security HTTP Server Check that there are no group or world writable files in the Document Root directory
[Medium] Excessive PUBLIC EXECUTE privileges Security Database Check for PUBLIC having EXECUTE privileges on powerful packages
[Medium] SYSTEM privileges to PUBLIC Security Database Check for SYSTEM privileges granted to PUBLIC
[Medium] Well-known accounts Security Database Test for accessibility of well-known accounts
[Medium] Execute Stack Security Host Check for OS config parameter which enables execution of code on the user stack
[Medium] Use of Unlimited Autoextension Storage Database Checks for tablespaces with at least one datafile whose size is unlimited
[Informational] Force Logging Disabled Configuration Database When Data Guard Broker is being used, checks primary database for disabled force logging
[Informational] Not Using Spfile Configuration Database Checks for spfile not being used
[Informational] Use of Non-Standard Initialization Parameters Configuration Database Checks for use of non-standard initialization parameters
[Informational] Flash Recovery Area Location Not Set Configuration Database Checks for flash recovery area not set
[Informational] Installation of JAccelerator (NCOMP) Installation Database Checks for installation of JAccelerator (NCOMP) that improves Java Virtual Machine performance by running natively compiled (NCOMP) classes
[Informational] Listener logging status Security Listener Test for logging status of listener instances
[Informational] Non-uniform Default Extent Size Storage Database Checks for tablespaces with non-uniform default extent size
[Informational] Not Using Undo Space Management Storage Database Checks for undo space management not being used
[Informational] Users with Permanent Tablespace as Temporary Tablespace Storage Database Checks for users using a permanent tablespace as the temporary tablespace
[Informational] Rollback in SYSTEM Tablespace Storage Database Checks for rollback segments in SYSTEM tablespace
[Informational] Non-System Data Segments in System Tablespaces Storage Database Checks for data segments owned by non-system users located in tablespaces SYSTEM and SYSAUX
[Informational] Users with System Tablespace as Default Tablespace Storage Database Checks for non-system users using SYSTEM or SYSAUX as the default tablespace
[Informational] Dictionary Managed Tablespaces Storage Database Checks for dictionary managed tablespaces (other than SYSTEM and SYSAUX)
[Informational] Tablespaces Containing Rollback and Data Segments Storage Database Checks for tablespaces containing both rollback (other than SYSTEM) and data segments
[Informational] Segments with Extent Growth Policy Violation Storage Database Checks for segments in dictionary managed tablespaces (other than SYSTEM and SYSAUX) having irregular extent sizes and/or non-zero Percent Increase settingsInterresting is revoking UTL_FILE from public, which is critical. Also revoke UTL_TCP and UTL_SMTP. This is going to upset an expert I know...Okay, as this is (I think) aimed at me, I'll fall for it ;)
What is the point of revoking UTL_FILE from PUBLIC? Yes I know what you think the point is, but without rights on an Oracle DIRECTORY being able to execute UTL_FILE is useless. Unless of course you're still using the init.ora parameter
UTL_FILE_DIR=*which I sincerely hope you're not.
As for UTL_SMTP and UTL_TCP, I think whether a program is allowed to send e-mail to a given SMTP server is really in the remit of the e-mail adminstrator rather than the DBA.
Look, DBAs are kings of their realm and can set their own rules. The rest of us have to live with them. A couple of years ago I worked a project where I was not allowed access to the USER_DUMP_DEST directory. So every time I generated a TRC file I had to phone up the DBA and a couple of hours later I got an e-mail with an attachment. Secure yes, but not very productive when I was trying to debug a Row Level Security implementation.
I have worked on both sides of the DBA/Developer fence and I understand both sides of the argument. I think it is important for developers to document all the privileges necessary to make their app run. Maybe you don't have a better way of doing that than revoking privileges from PUBLIC. Or maybe you just want to generate additional communication with developers. That's fine. I know sometimes even DBAs get lonely.
Cheers, APC -
What do you think of my Bash Script? What about the error checking?
Well what do you think of this Bash script
It works
I gave it some problems (i.e. unpluged the ethernet, messed up the URL's, uninstaled some programs...) to see if would report errors and stop or just keep going... But it did
I just kind of thought up a way to do some error checking with the commands that I know.....
What is a better way to do error checking?
What do you think I should add/Do to this script?
#!/bin/bash
# Shell script to make a USB Tumb Drive for Flashing BIOS on a Lenovo Ideapad Y510.
# This script needs to be owned and run as ROOT with the "sudo command"
# i.e. sudo usbbiosflasher
# If you have anyideas send me a PM on ubuntufourms.org my user name is HunterThomson
# Name/Rename this script usbbiosflasher and save it to the ~/home directory.
# Then run the command- chown root:root usbbiosflasher
# Then run the command- chmod 755 usbbiosflasher
# Then copy the script to the directory /usr/bin.
# Run this comand to do that- sudo cp ~/usbbiosflasher /usr/bin
# You also must have the program "mbr" installed
# You can install the mbr program by running this comand in the shell on Ubuntu
# sudo apt-get install mbr
# In Arch Linux you have to get it from Aur
# First you will need to know a few things...
# You will also need to know the Mount Point i.e. /media/disk and the /dev path i.e. /dev/sdb1.
# You can find these by using the df -T comand.
# Run df -T in the shell. Then plug in the USB Thumb Drive and run the df -T comand agin.
# The new listing is the USB Thumb Dirve.
# Also check to make sure the File System tipe is vFAT or FAT16 or FAT32.
# If it is not use gparted to format it to FAT32.
# I am farly certen that all USB Thumb drives come formated with FAT file system out of the BOX.
# You may want to fromat it anyway just to make sure.
echo "Interactive Shell Script to Make a USB Thumb Drive \for Flashing BIOS On a Lenovo Ideapad Y510"
echo ""
echo "You will need to have the program mbr installed"
echo "If you are on Ubuntu Linux you can retreve it form the repositories"
echo "If you are on Arch Linux you will need to get it from the Aur repository"
echo "Open anuther shell and \do that now..."
echo ""
verify="n"
while [ "$verify" != y ]
do
printf "Do you have mbr installed... yes or no?"
read AN1
echo ""
printf "You answered... $AN1 I have installed mbr. Is this correct... y or n?"
read verify
done
echo ""
if [ "$AN1" == "no" ]
then
echo "Install mbr now. Then run this script agin"
exit
else
echo "contunuing script"
fi
echo ""
# The next comand will make a directory to put needed files into. Note this file and everything init will be owned by root.
mkdir ~/usbbiosfiles && check1="yes"
if [ "$check1" = "yes" ]
then
echo "Made directory usbbiosfiles... OK"
else
echo "Could not \make directory usbbiosfiles"
echo "look above \for \info"
echo "Fix the problem and run this scrip agin"
exit
fi
# The next two comands will get the FreeDOS file and the .ROM file.
cd ~/usbbiosfiles && checka="yes"
if [ "$checka" = "yes" ]
then
echo "Changing to the usbbiosfiles directory... OK"
else
echo "Could not Change to the usbbiosfiles directory"
echo "look above \for \info"
echo "Fix the problem and run this scrip agin"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
rm -r ~/usbbiosfiles
exit
fi
wget "http://www.fdos.org/bootdisks/autogen/FDOEM.144.gz" && check2="yes"
if [ "$check2" = "yes" ]
then
echo "Download of FreeDOS... OK"
else
echo "Could not Download FreeDOS"
echo "look above \for \info"
echo "Fix the problem and run this scrip agin"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
rm -r ~/usbbiosfiles
exit
fi
wget "http://ubuntuforums.org/attachment.php?attachmentid=78460&d=1216648756" && check3="yes"
if [ "$check3" = "yes" ]
then
echo "Download of the BIOS.ROM \file... OK"
else
echo "Could not Downlad the BIOS.ROM \file"
echo "look above \for \info"
echo "Fix the problem and run this scrip agin"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
rm -r ~/usbbiosfiles
exit
fi
# The next comand will name the .ROM file to the right name.
mv ~/usbbiosfiles/attachment.php?attachmentid=78460\&d=1216648756 ~/usbbiosfiles/06CN29WW.bios.update.tar.bz2 && check4="yes"
if [ "$check4" = "yes" ]
then
echo "Renameing of the BIOS.ROM \file... OK"
else
echo "Could not rename the BIOS.ROM \file"
echo "look above \for \info"
echo "Fix the problem and run this scrip agin"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
rm -r ~/usbbiosfiles
exit
fi
echo ""
# The next two comands set the variables. DEVX for the path i.e. /dev/xxx and MOUNTX for the mount point i.e. /media/xxx
verify="n"
while [ "$verify" != y ]
do
echo "You will need to know the Mount Point and the dev Path. You will also need to \make sure the File System \type is vFAT, FAT16 or FAT32."
echo ""
echo "With the USB Thumb Drive unpluged, Open another shell and run the comand df -T Then plug \in the USB Thumb Drive and run the comand df -T one \more time. The new device listed is the USB Thumb Drive. Note the Mount Point and The dev Path and the File system Type i.e. vFAT... If the File System \type is not vFAT, FAT16 or FAT32 you will need to fromat it with gparted. You may want to format the USB Thumb Drive anyway just to \make sure. In any \case delete all files and directorys on the USB drive before you go any ferther with this program."
echo ""
printf "Enter the dev path the USB Thumb Drive is at?"
read DEVX
echo ""
echo "Are you sure $DEVX is the dev path of the USB Thumb Drive... y or n?"
read verify
done
echo ""
verify="n"
while [ "$verify" != y ]
do
printf "What is the Mount Point of the USB Thumb Drive?"
read MOUNTX
echo ""
echo "Are you sure $MOUNTX is the Mount Point of the USB Drive... y or n?"
read verify
done
echo ""
install-mbr --enable A1 --partition 1 --force --timeout 0 $DEVX && check5="yes"
if [ "$check5" = "yes" ]
then
echo "Installing MBR on USB Thumb Dirve... OK"
else
echo "Could not install MBR on USB Thumb Drive"
echo "look above \for \info"
echo "Fix the problem and run this scrip agin"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
rm -r ~/usbbiosfiles
exit
fi
tar xjf ~/usbbiosfiles/*.tar.bz2 && check7="yes"
if [ "$check7" = "yes" ]
then
echo "Unpacking BIOS.ROM file... OK"
else
echo "Could not unpack BIOS.ROM file"
echo "look above \for \info"
echo ""
echo "Reformat the USB Stick to FAT32 with gparted"
echo "Fix the problem and run this scrip agin"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
rm -r ~/usbbiosfiles
exit
fi
gunzip ~/usbbiosfiles/FDOEM.144.gz && check8="yes"
if [ "$check8" = "yes" ]
then
echo "Unpacking FreeDOS files... OK"
else
echo "Could not unpack FreeDOS files"
echo "look above \for \info"
echo ""
echo "Reformat the USB Stick to FAT32 with gparted"
echo "Fix the problem and run this scrip agin"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
rm -r ~/usbbiosfiles
exit
fi
mkdir ~/usbbiosfiles/fdoem144 && check9="yes"
if [ "$check9" = "yes" ]
then
echo "Made directory fdoem144 in direcoty usbbiosfiles... OK"
echo ""
echo "Going to \sleep \for 5secs"
else
echo "Could not make directory fdoem144 in usbbiosfiles directory"
echo "look above \for \info"
echo ""
echo "Reformat the USB Stick to FAT32 with gparted"
echo "Fix the problem and run this scrip agin"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
rm -r ~/usbbiosfiles
exit
fi
modprobe loop && sleep 5 && check0="yes"
if [ "$check0" = "yes" ]
then
echo "Modprobeing loop... OK"
else
echo "Could not \modprobe loop"
echo "look above \for \info"
echo ""
echo "Reformat the USB Stick to FAT32 with gparted"
echo "Fix the problem and run this scrip agin"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
rm -r ~/usbbiosfiles
exit
fi
mount -o loop ~/usbbiosfiles/FDOEM.144 ~/usbbiosfiles/fdoem144 && check10="yes"
if [ "$check10" = "yes" ]
then
echo "Mounting FreeDOS on the fdoem144 directory... OK"
else
echo "Could not \mount FreeDOS on the fdoem144 directory"
echo "look above \for \info"
echo ""
echo "Reformat the USB Stick to FAT32 with gparted"
echo "Fix the problem and run this scrip agin"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
rm -r ~/usbbiosfiles
exit
fi
cp ~/usbbiosfiles/fdoem144/* $MOUNTX && check11="yes"
if [ "$check11" = "yes" ]
then
echo "Copying FreeDOS files to $MOUNTX... OK"
else
echo "Could not copy FreeDOS files to $MOUNTX"
echo "look above \for \info"
echo ""
echo "Reformat the USB Stick to FAT32 with gparted"
echo "Fix the problem and run this scrip agin"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
rm -r ~/usbbiosfiles
exit
fi
cp ~/usbbiosfiles/*.ROM $MOUNTX && check12="yes"
if [ "$check12" = "yes" ]
then
echo "Copying BIOS.ROM files to $MOUNTX... OK"
else
echo "Could not copy BIOS.ROM files to $MOUNTX"
echo "look above \for \info"
echo ""
echo "Reformat the USB Stick to FAT32 with gparted"
echo "Fix the problem and run this scrip agin"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
rm -r ~/usbbiosfiles
exit
fi
sync && check13="yes"
if [ "$check13" = "yes" ]
then
echo "Runing the syncing command... OK"
else
echo "Could not run the syncing command"
echo "look above \for \info"
echo ""
echo "Reformat the USB Stick to FAT32 with gparted"
echo "Fix the problem and run this scrip agin"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
rm -r ~/usbbiosfiles
exit
fi
umount ~/usbbiosfiles/fdoem144 && check14="yes"
if [ "$check14" = "yes" ]
then
echo "Unmounting of FreeDOS... OK"
else
echo "Could not unmount FreeDOS"
echo "Look above for errors or problems reported and fix the problem"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
echo "Reformat the USB Stick to FAT32 with gparted"
echo "Fix the problem and run this script agin"
rm -r ~/usbbiosfiles
exit
fi
verify="n"
while [ "$verify" != y ]
do
printf "Do you see any errors... yes or no?"
read AN2
echo ""
printf "You answered... $AN2 to errors. Is this correct... y or n?"
read verify
done
echo ""
if [ "$AN2" == "yes" ]
then
echo "User Repoted... Error"
echo "Look above for errors or problems reported and fix the problem"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
echo "Reformat the USB Stick to FAT32 with gparted"
echo "Fix the problem and run this script agin"
rm -r ~/usbbiosfiles
exit
else
echo "Success"
echo "I did a lot of error checking too and didnt find anything"
echo ""
echo "Go get a pen and paper to write down these instructions"
printf "Then hit the Enter to continue"
read WAIT
echo ""
echo "Now leave the USB Thumb Drive pluged into your computer and Reboot. When the Lenovo Logo POST screen appears hit F2 to enter the CMOS setup utility. Go over to BOOT tab and go down to HardDrive \(Not Boot Order) \then \select the USB Thumb Drive as the 1st hard drve. Then F10 and yes to save changes. Your compter will reboot agin. Then when the Lenovo Logo POST Screen appers on reboot hit F4 to enter the BIOS FLASHING program. The USB Thumb Drive will be seen as the C drive \in the list on the Left, Select it. Then \select the .ROM \file \in the list on the Right and start the BIOS FLASH. \(NOTE Your hart may stop beating... This is normal) Pray to any God you know of and your computer should restart just like normal. Hit F2 and the BIOS will now stay it is 06CN29WW. You will need to \set the boot order to the way you like it and other things \if you need to because they have been changed to the default."
fi
echo ""
echo "End of script"
Last edited by hunterthomson (2008-08-10 11:17:47)Personally..... (this is just how I would have written it - if it works, then it's good enough for me though )
I would change this whole block:
verify="n"
while [ "$verify" != y ]
do
printf "Do you have mbr installed... yes or no?"
read AN1
echo ""
printf "You answered... $AN1 I have installed mbr. Is this correct... y or n?"
read verify
done
echo ""
if [ "$AN1" == "no" ]
then
echo "Install mbr now. Then run this script agin"
exit
else
echo "contunuing script"
fi
To this much shorter code:
MBR='/usr/bin/install-mbr' # Or where ever you expect it to be
if [ ! -x $MBR ] ; then
echo "mbr doesn't appear to be installed."
echo "If it is installed, check it's location, make sure it's executable and then make sure the MBR variable in this script is correct"
exit 1
fi
I wouldn't have used the checkXX variables for each stage:
mkdir ~/usbbiosfiles
if [ $? != 0 ] ; then
#failed
echo "Could not \make directory usbbiosfiles"
echo "look above \for \info"
echo "Fix the problem and run this scrip agin"
exit 1
else
echo "Made directory usbbiosfiles... OK"
fi
There is an issue with the way you do your verifications - the user can never get out unless they answer 'y' or hit CTRL+C. Something like this gives them options:
verify="n"
while [ "$verify" != "y" && "$verify" != "n" ]; do
echo "You need to answer 'y'es or 'n'o"
read verify
echo $verify | tr "[:upper:]" "[:lower:]" # This converts the answer to lowercase so replies entered in upper case will still work
done
if [ $verify != 'y' ] ; then
exit 1
fi
One last thing I try to do in scripts... Declare all your binaries as variables at the start of the program, then execute the binary program by using the variable. For example:
# Binaries
TAR='/bin/tar'
CP='/bin/cp'
CHMOD='/bin/chmod'
# Execute tar and chmod the created file
$TAR cvzf /tmp/tarfile.tar.gz /etc/*.conf
$CHMOD 400 /etc/*.conf
This way, it's easy to change the path in future without having to hunt through the script if the paths change, and it also ensures you're calling the programs using the full paths to make sure you're not executing some strange variant or alias that someone has setup. If I use `chmod` 30 times in a script, and the path changes in the future or on a different system (`chmod` is a bad example cause it's highly unlikely to change, but you know what I mean), then all you need to do is update the variable at the start of the script, and it all works again without having to script-hunt and change it 30 times. -
Lack of SD card slots what do you think
I don't know about the rest of you, but I like my stuff on an SD card. Not in a cloud. It seems Motorola, Verizon, and android all want you to put your stuff in the cloud. I'm sorry but I like my privacy and I like to access my content even when I have no signal. The cloud is for morons who don't realize their stuff can be hacked. If the Pentagon can be hacked, so can the cloud. Verizon, give us the option. Quit force feeding us stuff that a bunch of techno geeks sitting around and dream up. I have been a loyal customer for years and your trying my patience. I like my Droid Razr MAXX HD. It has served me well for 2 years in some of the worst environments. It has never failed me and I think you hit the nail on the head when you introduced it. But you took a moronic stance and quit offering it. You got it right and then screwed it up. The only complaint I had was all the bloat ware. Give us the choice. We buy the phone, it is ours, we should be the ones to decide what stays and what goes. Not some ***** sitting in marketing. If you want to introduce it, then do so but allow the people the choice of what stays and what goes. It will cost you customers in the future if you don't, including me. Have a nice day!!!!
You ask "what do you think".
I think that your message would/will be better received if you didn't resort to name calling and "colorful" language.
You/we will never win the "argument" over what you term "bloatware". Verizon enters into financial agreements with the providers of that software to be able to install it on the devices. They make a lot of money (presumably) on this, so it is not likely to end. -
Hi everyone,
I've recently updated my iphone 4s with the ios7 update and there was a bug fix I also downloaded recently but I hadn't noticed anything wrong at the time. I know it's not happened that often today but does anyone have any problems with their 'slide to unlock' button and have to reload their iphone again? Do you think there'll be a bug fix for it? Just worried as it's not old and I have a feeling I shouldn't have bothered with the update at all.Why would you think it's a bug? If it were a bug EVERYONE would be having the same issue.
Basics from the user guide are restart, reset, restore from backup, restore as new. -
Still in a quandary about hardware specs. What do you think?
I need to build a new system as editing machine for CS4. Everything is more or less clear as to what I need, there are only two issues remaining:
1. How much RAM to install, and
2. Disk setup.
As always there is the balance between performance and costs. Since this is not "an unlimited means available" type of machine, you will not see much esoteric components, like SSD raids or nVidia Quadro CX card. It is a dual E5472 Harpertown system (8 core), running Vista 64 Business.
1. How much RAM would be a good balance in price/performance? 8 or 16 GB? We are talking about Kingston Value Ram DDR2-6400 ECC FBDIMM, either 4 x 2 GB ( 420) or 4 x 4 GB ( 650), with the possibility to double memory in the future. If you do not make a habit of continuously switching between PP, AE, EN, PS etc. and are mainly using only 1 application at the time, I wonder if there is a noticeable performance gain to justify the additional cost. The choice is obvious if the total cost of the machine would not be stretching available means. So what do you think?
2. Main storage is 8 x WD Caviar Black 1 TB disks in raid50 for media, renders, scratch etc. But what about the boot disk? Either a 300 GB WD Velociraptor ( 240), or 4 x WD Scorpio (7200 RPM) 160 GB in raid10 ( 250), using on-board ESB2 chipset.
While we are at it, does it make sense to add 4 x WD Scorpio 250 GB in Raid5 (on an Areca ARC controller with free ports) only for pagefile, projects and temporary export. Final export will be transferred over the network to a burning machine for DVD's. Backups of projects is to external USB disks and on a separate machine over VPN.
The case has room for 8 hot swappable 3.5" disks and 8 hot swappable 2.5" laptop disks plus another disk and a DVD/BR burner internally. There are still 4 external eSATA ports available for future expansion. Foreseen video card is ATI 4870 512MB. Network is currently a 1 Gb connection, but can be enhanced to 2 Gb with 2 NIC's.
Look forward to your reactions.Bill,
The case is the
Supermicro SC743TQ-865SQ
and the storage bay for the 2.5" disks is the
Addonics AE4RCS25NSA (2.5 Disk Array 4SA)
Thanks for your remark about the difficulty of troubleshooting boot arrays. That might be an advantage for the Velociraptor.
Dag, no. I don't make the mistake of visiting Amsterdam, unless it is absolutely necessary, like visiting the IBC, let alone visiting those bars. I came to realize that Vista has grown up a bit with SP1 and with full support for 64 it now makes a bit more sense than XP64. It does imply a couple of days tweaking Vista (= removing 'features') to make it work decently, but after that is accomplished I will make a slip streamed DVD version for future installs, so that is a one time investment. With recent enhancements in Nullsoft that is easily accomplished, including all intermediate patches and 'Patch Tuesday' versions. -
Since my G5 died I was thinking about getting a Mac Mini, but I have a ViewSonic Monitor (from 2004) and a USB keyboard and mouse - I also have the external drive that I downloaded my files on to. Do you think the monitor, keyboard and mouse will work on it? Would I have to get a hub so I could use the stuff I already have? Is that viewsonic too old to work on it?
What else would I need? Please advise...Yes for keyboard and mouse.
The monitor will work if it has an HDMI, VGA ir DVI input. If it only has a VGA input you will need this adopter
http://store.apple.com/us/browse/home/shop_mac/mac_accessories/cables/cable_choo ser#selected-step1=MINI-DISPLAY-PORT&selected-step2=VGA&step=3 -
my final cut is running extremely slow after having for 6 months. I use external hard drives and save nothing on my computer. it takes a long time to render now. do you think something is wrong with computer. took it to mac store but they fail to help me. I have a 13 inch mac book pro 10.6.8 8gb 2.3 gfz intel core i5
What did Apple tell you about what they did (or did not) find here?
See if working on the main disk is any faster.
USB2 is glacial, as I/O interconnects go. And USB2 disks have been known to fail, or sometimes to drop back to USB1 speeds, too. FireWire 800 is substantially faster than USB2, but still not as fast as the internal drive connections can provide.
Put another way, start varying your configuration, and see which configuration changes (still) have the problem, and which don't. -
i accendentaly deleted my iphoto when i empty my trash. i think 1 year ago. i want it back but they say its difficult. now i think i'll buy iphoto to apps. what do you think guys??? ty and god bless!
A bunch of totally different questions
iPhoto is an application and it is in your applications folder - is it there? It must be in teh Applications folder on your boot drive - it can not be on an external drive
The photos are kept in the iPhoto library (by default and highly recommended) - is that what you deleted? It can be anyplace by by default it is in your pictrues folder
Time Machine is a backup program that backuse your your Mac - you do NOT directly access its backup files but you use the Time Machine application to restore files - see http://support.apple.com/kb/HT1427?viewlocale=en_US&locale=en_US for details
Your post is not at all clear as to what you have or what you want to do
If in fact you do have a copy of the photos on an external hard drive as you say you thikyou do them you launch iPhoto and import them to iPhoto (file menu import -- or drag them to the iPhoto icon in the Dock)
If you have a time machine backup of your iPhoto library and you want to use that then you launch TM and go to the time you wna tto restore from, select the iPhoto library and click restore
If the above does not cover what you have and what you want please post back with exact details of what you have and what you want to do
LN -
'DNG-back-to-X' or 'reverse conversion'. Do you think it's needed ?
I'm sure this has been discussed before, but I still need to speak my mind
I believe a "reverse DNG converter" is not a convenience but a necessity.
I've come to the conclussion, from what I've observed since I use DNG myself, that having this converter would eliminate the two main reasons I find people still have to not use DNG.
The main fear I've observed is that A LOT of people have the impression that Adobe pretends to lure them into a trap, 'slaving' them to an Adobe format instead of their camera format : just a change of master, but remaining a slave just the same. Their reasoning is 'why change, there are no advantages freedom-wise'.
Added to this, a lack of real/full support of the DNG format in software outside of Adobe reinforces that perception: they feel they're forced to use an Adobe product from the day they start using DNG.
The other one is caused by disinformation : Most people believe they lose data in the process of conversion. This is also reinforced because all non-Adobe software fail to read the propietary info, maker notes, inside the DNG file.
A 'DNG-back-to-X' converter would end the discussion instantly. This would not only ensure them that they can go back at any time they wish, no harm done, but they could test if their data is conserved back-and-forth, finally understanding that no data is lost and that the only problem is software companies not fully understanding/supporting DNG.
They reason often given for not having this reverse converter is technical. I believe it can be done ... if Adobe wants to make a point having it done.
I'm no engineer, but I have the perception that though it may be difficult, they main reason for not having it done is that Adobe feels there's not enough benefit from it and their resources are better employed elsewhere.
With this message I just wan't to expose MY reasoning of why Adobe needs to address this.
What is your oppinion on what I've just said ? Do you think it would be a welcome tool ? Do you think it is technically possible to do it ?
Thanks for reading my poor excuse of an analysisJimHess:
I use DNG because, apart from the normal metadata cuestion, it saves me from having original and (multiple) final versions of the image. All the edit steps and therefore all the version of the image, can be contained within one single file.
It can do that for Lightroom, and it could do that for any other program that chose to save the processing steps inside the DNG file instead of on an internal database. For me it solves a lot of archiving problems.
BUT I need it to succeed, or all the advantages of using it now will turn into headaches in the future when no one apart from Adobe really supports it.
In your answer I find the same 'barrier against DNG spread' problem I'm talking about. DNG is, in each and every aspect, a better format than any propietary RAW file, and the benefits of having to manage just one format are many ... yet you don't find the need to use it as the main filetype in your workflow.
I believe that, if 'de-converting' were as easy and trivial as converting to DNG, you would indistinctly use any of them. Right now, as you said, have to be convinced to use DNG... because it has tradeoffs.
Being able to convert and de-convert would wipe any tradeoffs and need-to-be-convinced.
Greg Barnett :
I obviously enjoy having better noise reduction and lens corrections too. But that can be done with many other tools.
DNG conversion and de-conversion foundations must be done by the 'fathers' of the format. It can't be done by anyone else, and it needs to be done or DNG will lack a solid and trustworthy roots to grow further.
Any doubt about being a wise move to convert to DNG or not must be erradicated in order to be adopted without remorses, and the most important step is, more important than denoising algorithms from my point of view, to tell everyone - you can trust us with your image, we are TRULY open, we won't held your images hostages, you are free using DNG and here's the proof.
Maybe you are looking for
-
I can't edit photos in iphoto 11 9.4.1
I just installed an update to iPhoto 11 (version 9.4.1). This required the photo library to be updated, which iPhoto did automatically. Now I can't edit any of my photos. I was able to create a duplicate of a photo, but the Edit Photo function is gra
-
I have tried over and over to download the itunes 10.5.
I have tried over and over to download the itunes 10.5. When i plug my phone in to get iOS5 it says i need to download 10.5 but when i go to download it, my mac says its already downloaded. what do i do?
-
Applet HelloWorld class HelloWorld could not be loaded.
Dear Colleagues I am very new to Java, but have followed the advice of a number of people here and read one or two tutorials. I thought I had managed to write my first HelloWorld! application/applet in that I can see HelloWorld.java and HelloWorld.cl
-
I have an iphone 4 and do not appear the weather in central notification ios7. how can I fix this?
I have an iphone 4 and do not appear the weather in central notification ios7. how can I fix this?
-
Pivoting; dynamic pivot_in_clause
I have this situation: create table pivot_data (group_id NUMBER(10), address_state VARCHAR2(20), address_zip VARCHAR2(5), skill_id NUMBER(10), person_id NUMBER(10), person_name VARCHAR2(20) INSERT INTO pivot_data VALUES (1,'VIRGINIA','22222',10,100,'