Do you use a case?

Do you use a case?  If not, why not?  How do you prop the iPad up without a stand?  Doesn't it get scratched up in your bad?

I bought an OtterBox Defender case for my iPad 3 as soon as I bought the iPad, over 2-1/2 years ago. It has a built in screen protector and a stand that enables you to use the iPad in several different positions. I remove the iPad from the case every three weeks or so and clean the case inside and out. The iPad is in pristine condition with nary a scratch or a mark anywhere.
It is obviously a matter of personal choice, but I tend to be a bit on the clumsy side, and the case has saved my iPad on more than a few occasions. I use one on my iPhone 5S and it has saved the phone on even more occasions than the iPad 3.
http://www.otterbox.com/iPad-Defender-Series-Case/77-18640,default,pd.html?start =1&cgid=ipad-2-3-4-cases

Similar Messages

  • Can you use event case with labview real time?

    I have a real time application I am putting together and until recentally have concentrated on getting the data acquisition working as expected.
    I am using a PXI-8183 in a 1031 chassis.
    I am now trying to add the functionality for setting up the system in the form of a GUI remote front panel that I connect to with a host laptop.  I am connecting with the host as expected and it seems to be working well in that respect.
    My problem is with event cases, operating in a while loop on the target.  They just dont seem to want to trigger when i click on a button I have set an event for.
    I have looked through the documentation and cant see any reference to issues with event cases on rt, but I feel I am missing something fundamental.  Can anyone help?
    Regards,
    Barry

    look here maybe:
    http://digital.ni.com/public.nsf/allkb/42B70D2D0C4B568586256E2F0051441D
    Harold Timmis
    [email protected]
    Orlando,Fl
    *Kudos always welcome

  • 3GS owners: do you use a case?

    Curious if there are any 3GS owners out there that don't have any screen protector or case for your phone? I have tried the slider InCase and a similar case by iFrogz, but the iPhone just feels so much better in my hand without any type of case. I even feel like I can type better without a case. And a screen protecto just bothers my eyes!

    I have a Seido Innocase II on order. Checked out cheaper cases but they all seemed to leave too much chrome exposed, especially the corners. I'm not buying a case that still allows a corner to be crushed if dropped.
    I wasn't aware of the Contour Flick case. It looks just as good as the Innocase, but since it costs a bit more, I have no regrets.
    When I was looking at the cases at the Apple Store, a couple people said they had rubberized cases but hated them because they were too sticky when trying to slide the phone in and out of a pocket.

  • What kind of iphone case do you use?

    About one year ago, I bought an incipio silicon case at at&t for my iphone 3g. It was good, but the plastic part was broken in two months.
    I bought an iPhone 3GS three months ago and got a crystal-clear case from icarecase. It is a good deal, only $7.99 including shipping. My iPhone has full protection now and it looks nice. The only thing is that I hope it can be slimmer and still keep my iPhone fully protected.
    I chatted with icarecase customer service rep, they said they have other cases which are very slim, 0.6 to 0.7 mm, but they are not crystal clear. I will think about it.
    What kind of case do you use?

    Greetings,
    Case-Mate - Signature Leather IPH3GC-PB. It's real leather, it's not bulky, and nice to work with. The plastic, and silicone ones, are not the best fitting, and stretch out of shape when it gets hot. They can be difficult to remove the phone from over time, and can be awkward to hold and manipulate.
    You can't beat real leather, and it has a stiffener, to help provide good grip, and to hold the shape. It offers a decent degree of protection from dropping it from a small distance.
    I've had one of these since the very first iPhone. They are only $34.95 cheap, and worth every penny.
    Cheers,
    M.

  • What iPhone 4 cases do you use?

    Hey guys,
    Just wanted to ask your personal preference on cases on your iPhone 4.
    Do u guys use them? If so please let me know what you use on your phone
    I have tried so many cases and just haven't found the right one for me....
    Thx for your time, DAVIDO12

    David
    I use an old fashioned belt-clip type with a magnetic closure.  I find it helpful to clip the iphone in place with I'm using Hotspot out on my boat. with poor cell reception  I also have a retractable  lanyard clip through the antenna case hole that I use to clip it securely to my messenger bag when traveling.  This allows me to use my phone and it is always attached to me.
    So not very fashion conscious but it is secure and protected from an accidental drop.
    Call me old fashioned.

  • Carrying Case - Ultrabay Drives --- what do you use?

    What do you use to carry your external ultrabay drive?
    I'm looking for a rigid case for my ultraslim drive for added protection, since it normally sits inside my bag, without any good protection./
    THanks!

    Hi,
    I put my mac's in a spare camera pouch.
    Maliha (I don't work for lenovo)
    ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
    IdeaPad: U350
    Apple:- Macbook Air [Snow Leopard]
    Did someone help you today? Compliment them with a Kudos!
    Was your question answered today? Mark it as an Accepted Solution! 
      Lenovo Deutsche Community     Lenovo Comunidad en Español 
    Visit my YouTube Channel

  • Which sleeve/bag/case do you use for your Macbook Pro?

    So what do you use? I've been stumbling across ebay to find something decent for my 15 inch mid 2009 but most of the sleeves don't fit the new macbooks...

    for my 17" MBP I use a Waterfield bag (http://sfbags.com). It's actually a sleeve and a cargo bag combo with a nice cable bag as well. Not cheap ($270 or so), but it's very well made and a very nice compliment to the apple in terms of fit, finish, and quality. The Waterfield bags are fantastic, and the sleevecases are very protective, such that you could buy just the sleevecase and drop your computer in whatever bag you like at the moment.
    For an older 13" white macbook, I have a Pinder thin, which is much cheaper (~$35 on sale) and is a nice thin minimalist bag. It makes for the smallest laptop and bag combo I've seen (prior to the air) that I would be comfortable carrying around.
    Sheldon

  • How do I use the CASE statement  in the where clause?

    Hello Everyone,
    I have 2 queries that do what I need to do but I am trying to learn how to use the CASE statement.
    I have tried to combine these 2 into one query using a case statement but don't get the results I need.
    Could use some help on how to use the case syntax to get the results needed.
    thanks a lot
    select segment_name,
    product_type,
    count (distinct account_id)
    FROM NL_ACCT
    where
    ind = 'N'
    and
    EM_ind = 'N'
    and product_type in ('TAX','PAY')
    and acct_open_dt between (cast('2006-01-17' as date)) and (cast('2006-01-17' as date) + 60)
    GROUP BY 1,2
    order by product_type
    select segment_name,
    product_type,
    count (distinct account_id)
    FROM NL_ACCT
    where
    ind = 'N'
    and
    EM_ind = 'N'
    and product_type not in ('TAX','PAY')
    and acct_open_dt between (cast('2006-01-17' as date)) and (cast('2006-01-17' as date) + 30)
    group by 1,2
    order by product_type

    Something like:
    SELECT segment_name, product_type,
           SUM(CASE WHEN account_id IN ('TAX','PAY') and
                         acct_open_dt BETWEEN TO_DATE('2006-01-17', 'yyyy-mm-dd') and
                               TO_DATE('2006-01-17', 'yyyy-mm-dd') + 60 THEN 1
                    ELSE 0 END) tax_pay,
           SUM(CASE WHEN account_id NOT IN ('TAX','PAY') and
                         acct_open_dt BETWEEN TO_DATE('2006-01-17', 'yyyy-mm-dd') and
                               TO_DATE('2006-01-17', 'yyyy-mm-dd') + 30 THEN 1
                    ELSE 0 END) not_tax_pay
    FROM NL_ACCT
    WHERE ind = 'N' and
          em_ind = 'N' and
          acct_open_dt BETWEEN TO_DATE('2006-01-17', 'yyyy-mm-dd') and
                               TO_DATE('2006-01-17', 'yyyy-mm-dd') + 60
    GROUP BY segment_name, product_type
    ORDER BY product_typeNote: You cannor GROUP BY 1,2, you need to explicitly name the columns to group by.
    HTH
    John

  • How do I use a Case Structure with Strings?

    I need to use a string list to set up a set of cases to be performed. Is it possible to tell a single case structure to do "a, b, c, and d, but not e or f" or "do a, c, d, and f, but not b or e" etc... when you use a string containing the cases to be used?

    Blackavar,
    A case structure will only execute a single case at a time. If you want to have multiple cases execute in parallel, then you would need to have multiple copies of the case structure and split the string apart and wire them to all of the needed case structures.
    This could be done with reentrant subVIs to run truely in parallel. Anther method would be to have 6 different case structures, all with 7 cases each. The 7 cases would be "a", "b", "c", "d", "e", "f", and "0". Your input sting will need to be built up so that it will always be 6 characters long and then split up so that each character goes to one of the case structures. You would have your needed code for cases a - f. Case "0" would do nothing.
    Randy Hos
    kin
    Applications Engineer
    Nationsl Instruments
    http://www.ni.com/ask

  • Can you use the Airport Express A1264 as an AP and a DHCP server at the same time?

    Can you use the Airport Express A1264 as an Access Point and a DHCP server at the same time?
    I would like to use it as a DHCP server and AP at the same time in my LAN (no internet, just local machines through a few switches). I was lead to belive this could be the case from a few networking friends that haven't been friendly enough to help me out setting it up.

    I need it to act as a dLink/Cisco/Linksys/etc basic wifi router, in the fact that you can access it via wifi, and it will spit out DHCP addresses (192.168.1.xxx) to everything wired downstream of it.
    I want to simultaniously provide a Wifi connection and a LAN connection at the same time
    Thanks,
    BRad

  • How do you use the Multiple Item Information dialog box ???

    How do you use the Multiple Item Information dialog box ???
    Where are the instructions on how the information in the Multiple Item Information dialog box equates to ...
    1. The way iTunes sorts tracks and albums
    2. The reason to select a leading check box
    3. Why there are Option selections (Yes /No) and leading check boxes.
    4. Why some changes remain in the track info, but do not "take effect" in iTunes (Part of a compilation is an example)
    Looked in Help, Support, went to the local Genius bar for an hour, even arrainged a call from apple support ...
    Thanks

    As Christopher says, it's a compilation. Different tracks are by different artists.
    Setting the *Album Artist* field to *Various Artists* and setting *Part of a compilation* to Yes should be all that is required. Depending on your *Group compilations when browsing* setting ( I recommend On ) either should suffice but I suggest doing both.
    Based on your commentary, I selected all the "O Brother" tracks, and checked the boxes for everything line that was blank in the Info and the Sort panes. Only exceptions were the album name and the disc number 1 of 1 and the artwork. I blanked and checked anything else.
    That's not what I meant. When you select multiple tracks, only those values which +are already common+ to all tracks are displayed. Typically these will include Artist, though not with compilation albums, Album Artist, Album, No. of Tracks, Genre plus various sort fields. A blank value may indicate that different tracks have different values or it may be that the value is blank for all tracks. For the drop down values on the Options tab the value shown may not reflect the information in every tag. If values you expect to be common, such as Album Artist or the Album title are not displayed you can simply type these in and click OK. This will often be enough to group the album.
    If you place a checkmark against the blank boxes and apply changes then you will clear those fields so you should only do this if that is the effect you want. Putting a checkmark next to an empty (representing different values) *Track No.* box, for example, will just clear the all the track numbers which is very rarely useful.
    Adding then removing extra text is for a specific problem where despite all common values being identical across the tracks of the album iTunes seems to "remember" that it should see two albums. A typical example would be when an album originally listed as *Album CD1* & *Album CD2* is given disc numbers X of Y and then has the Album name changed to Album. I've seen iTunes merge all but one track into the new album, but insist on listing one remaining track separately, despite both albums having the same title. In this case I've found overtyping the album title again has no effect whereas changing it to AlbumX and then back to Album does what I was trying to achieve in the first place.
    Don't forget that even properly organsied albums may still break up if you don't chose an album-friendly view. Sorting on the track name or track number columns can be useful in some circumstances but in general I revert to Album by Artist when browsing through my library.
    tt2

  • HT2534 How do you use an iTunes card after you have redeemed it?? I have entered my code for redeem and when I click on purchase song it asks me for a credit card?!

    How do you use your iTunes card after you have redeemed it. I have entered my redeem code and my balance is $20.00 but when I go to buy a song it asks me for my credit card details...?!

    If you set up an Apple ID already and didn't enter credit card details because you were planning on using gift cards only, you probably set up the account incorrectly. If this is the case, you will have to enter the credit card details even if you want to use only gift cards and download free content only. Yoy will not have to use the card, but you can't use the ID without entering the card details now. You may be able to remove the card as well after the card is verified for use by Apple by editing your account details.
    There is a very specific manner in which you have to set up an ID without using a credit card. You can read about it here.
    http://support.apple.com/kb/HT2534
    See this about changing iTunes account information.
    http://support.apple.com/kb/ht1918
    If you decide to create a new ID now, you will new another email address as wel, because the email address that you are currently using will already be associated with the ID that you just set up.
    I am making certain assumptions here and reading between the lines of your post, so if I am guessing incorrectly, post back with more details.

  • How to use a case ststement in interface?

    how to use a case statement in interface?
    My requirement is in interface for one column for
    Eg: In source column if a.b=c.d then i need to write as "Source"
    else when a.c=d.e then i need to write as "Target".
    please can you help in solving this.
    Regards,
    Sridhar

    You will literally write in the "Implemenation", the following:
    Case when a.b=c.d then "Source"
    Else
    "Target"
    End

  • Error message, "To update this application, sign in to the account you used to purchase it."

    I recently had a HDD crash and need to reinstall my App Store software purchases except I now recieve this message when I attemp to redownload software.
    "To update this application, sign in to the account you used to purchase it."
    Which leaves me feeling incredulous because I logged into the App Store using the same account it claims I need to use to download my software purchases?
    Any suggestions or solutions people can offer would be most helpful.

    There are some tips linked to this Discussion Thread that might help you out. Especially with re-downloading iLife Apps onto Lion. But in your case it may also apply as your updates are being provided through the App Store as well:
    https://discussions.apple.com/message/16518526#16518526

  • Why doesn't my macbook pro let me update certain applications? It says "You have updates available for other accountsTo update this application, sign in to the account you used to purchase it.

    Why doesn't my macbook pro let me update certain applications? It says "You have updates available for other accountsTo update this application, sign in to the account you used to purchase it.

    it's also likely that you used two different apple IDs to purchase apps. if that's the case then you simply have to log out of your app store, and log into the other account to update the apps.
    from experience it's not possible to syncronise purchased content from two different accounts. but you can always give Apple a call.

Maybe you are looking for