Doc Curr and Item Cond. Curr should be same for SO Creation

Hi Experts ,
I have an requirment as while creating SO the Document currency and Item Condition Currency should be same otherwise it should not allow to SAVE the SO.
This type of senario becomes when in costomer master it is maintaned as some other currency like INR but for condition it is maintained in transaction VK11 which is mantained in other currency like USD.
at this situation OS Document currency will be inINR but Item Condition Currency will be in USD and its allows to Save in SAP Standard procedure.
I need to stop it here untill they will change the Condition Record OR Cusmer master Record.
Thanks & Regards,
DTK

Hi,
I think you can place your checks in MV45AFZZ subroutine USEREXIT_SAVE_DOCUMENT_PREPARE.
Compare the currencies and issue error accordingly. But i hope this is the standard SAP functionality where in the automatic conversion happens with appropriate exchange rate.
Thanks,
Vinod.

Similar Messages

  • Firefox will download (or send to Word) .docx files but not .doc files and the application settings are the same for both.

    I have tried resetting the application settings for Word 1997-2003 -- browsing for my Word 2007 program, instructing Firefox to save the file, or to ask me what to do. In all cases, Firefox simply opens a new blank tab. I have also tried resetting the setting and closing then reopening Firefox.

    Hello,
    With firefox 4.0.1 I encountered this problem too. '.doc' files don't open the 'Ask Always' Popup asking either to open or save the fine.
    This works fine for 'docx', 'ppt' or other file type.
    I only encountered this problem since I upgraded to FF 4
    My application setting for both Word extension type are the same.
    Any solution to this?
    Bas.

  • "can the iphone 5 hold 1170 songs and 85 apps or should i go for the 32gb model?"

    "can the iphone 5 hold 1170 songs and 85 apps or should i go for the 32gb model?"

    I have more music than that and more apps, and I have a 32GB model with about 15GB free, so I would suggest the 32GB.

  • My email (sign-in) and password for iTunes is different than my email (sign-in) and password for iCloud. How do I change my sign in and password so they are the same for both iTunes and iCloud without losing my iTunes content?

    My email (sign-in) and password for iTunes is different  than my email (sign-in) and password for iCloud. How do I change my sign in and password so they are the same for both iTunes and iCloud without losing my iTunes content?

    Hey Lakedrive442,
    It sounds like you have changed your Apple ID which you use with iTunes.  If so there are several places you may need to update it as outlined in this article.
    Apple ID: What to do after you change your Apple ID - Apple Support
    Of course some might not apply, but many might.
    Thank you for thinking of Apple Support Communities for your support needs.
    Nubz

  • Which php and my sql tutorials should i learn for making websites like fb, utube etc..?

    http://www.w3schools.com/php/php_ref_ftp.asp this is a link for php......on this page what should i learn for making websites like fb,etc...and also tell me about my sql http://www.w3schools.com/sql/default.asp ....what should i learn about my sql....for making big dynamic websites....

    on this page what should i learn for making websites like fb,etc...
    ...what should i learn about my sql....for making big dynamic websites....
    Everything and a whole lot more...
    David Powers has written some good books on PHP to help you get started.
    http://foundationphp.com/
    Killer PHP Video Tutorials
    http://www.killerphp.com/
    PHP Academy
    http://phpacademy.org/
    Lynda.com PHP & MySql Essential Training
    http://www.lynda.com/PHP-tutorials/php-with-mysql-essential-training/435-2.html
    Nancy O.

  • Infoset doc no. and item  data  Outer Join  Problam

    HI Gurus,
    I am using infoset based on 2 ODS 0figl_o02 and 0fiap_o03 for queiry.
    I have a requirment like ...
    0fiap_o03
    doc no. item   amount   vendor
    3333        1    10000 101
    3333        2    20000 101
    0figl_o02
    doc no. item amount
    3333        1    10000
    3333        2    20000
    3333        3    30000
    3333        4     40000
    3333        5    50000
    Now data required in Infoset
    doc no. item amount vendor
    3333        1    10000 101
    3333        2    20000 101
    3333        3    30000 101
    3333        4     40000 101
    3333        5    50000 101
    i am currently join it with company code and doc no.
    plz provide me your input to get above data in infoset.
    null
    Message was edited by:
            SSMS
    Message was edited by:
            SSMS
    null

    Thanks Phani,
    I joined item and did outer join.
    data is not coming as required.
    is that the way to apply outer join.????
    Message was edited by:
            SSMS

  • PR Line Item Number should be Same for PO Line Item Numebr

    Hi Gurus,
    I have a rare Requiremenet. I will convert Only one PR to PO(So It is one to one) PR Item Number should Be Equal to PO Item Number.. can anybody suggest me is there any way to achive this.
    Explanation:
    Actually we will create third party Sale order and with A BAPI we  create PO in background.
    I will change Sales Order qty(Decrease directly or increse with schedule lines) so new PR items will be generated or Existing may be deleted. now i want my PR Item number should be equal to PO Item Number.
    In BAPI we have a provision to provide PR number still system is taking in sequential intervel of 10,20,30....
    How to overide this...
    EX:
                     PR               PO
    ItemNO      10              10
    ItemNO      30              30
    Thanks
    Pradeep

    Hi Monika,
    Thanks a lot my issue got resolved. annd i have another question regarding BAPI_PO_Change.
    Actually i am passing Price from PR to PO and i am making no_price_from_po while chenging PO and i am passing PRICE from SO to PO. Below scenario will explain My requirement.
    In third party we are creating Automatic PO from SO. we have developed one ZTrasaction for SO Approval in two stages, in second level Approval we are converting PR to PO.
    while creating we are able to pass Price value from SO to PO From Condition in the Pricing procedure.
    while changing we have 3 scenarios
    1.Changing Existing PR Item quantity
    2. Adding one more schedule line to the Existing SO so it will create one more PR Item
    3. we are adding one more Line Item in the SO in this case also one more PR Item will be generated
    we are able to convert each PR Item will be one PO line Item 
    But while changing we will have PO still we don't want to copy the Price from Previous Document.
    we have activated no_price_from_PO in the BAPI but still system is taking from previous Document.
    Pl suggest me if there anyway to over come this issue...
    Thanks
    -Pradeep

  • Which version and SP of ESS should be installed for NW2004s EP7.0 SP09?

    Hi all,
                 We are implementing ESS in our project.Please suggest which version and support package of ESS should be installled.we installed NW2004s EP7.0 SP09 and our backend system is ECC6.0.Plese also provide me the installation and configuration guides .If anybody have guides please mail to [email protected]
    Thanx & Regards,
    Rajesh.

    check this link
    https://www.sdn.sap.com/irj/sdn/contentportfolio
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/d0dfa6ad-9b6d-2910-3d9a-f278ecc80c60
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/a0b47200-9c6d-2910-afa6-810c12eb7eb3
    http://service.sap.com/ess
    check ur mail .i sent some documents and reward points if helpful

  • I would like to open word docs, excel and ppt?  Is there an app for this?

    Help.  I understand there is an ap I can purchase to be able to work from my computer.  I want to be able to open word/excel docs.

    Pages has a version for iOS, and there are other apps for iOS, reportedly capable of reading these files. I do not like iPad so am not very good here, my son is better, for sure.

  • Profoma invoice and commercial invoice number should be same ?????

    Hi Experts
    My client requirement is
    when proforma invoice will create for that document number will be there , but w.r.t. that same delivery when they will generate the final commercial invoice that time the same proforma invoice number should be generate.
    is it possible????
    because for few delivery there may not be needed to generate proforma invoice, direct invoice will be there and hence the both document type is different and number range also so how can we achieve this
    Thanks in advance

    Hi,
    As per my knowldege this is not possible in std SAP and neither advisable.
    Better option would be that in cases where u generate proforma invoice first and than commercial invoice ,print the proforma invoice no. also for refernce.
    Regards
    Sanjay

  • Commercial Invoice and Excise Invoice number should be same

    Hi Friends,
    I want to know whether is it possible to maintain same number for commercial and excise invoice.
    If yes then how to do?
    Do i have any impact in other areas?
    Thanks&Regards
    Azeez.Mohd

    Hi,
    In that case you can make use of MV45AFZZ user exit.
    Use the MOVE_FIELD TO VBAK_VBAP exit.
    In this exit, get the corresponding excise invoice number and year (by using Delivery / Proforma as reference From VBRK / J_1iEXCHDR ) tables and concatenate it.
    As excise invoice has document number and year.. You can make the billing document number as the concatenation of these two and move to VBAK-VBELN.
    As you already move the value to VBAK-VBELN, system will not pick up the the number range that is assigned for the billing document.
    Regards,
    Sai
    Edited by: sai srinivas on May 14, 2009 12:35 PM

  • There is no option on iPhone 4 with O2 for personal hotspot. I do have a contract and O2 after a lot of discussion and updates said I should contact Apple for help

    I have and iPhone 4 with the latest 4.3.3 software and have confirmed with O2 I have the personal hotspot option contract. After 2 days of reloading the software on hard and soft resets, I still do not have an option on my phone for personal hotspot or tethering. O2 suggested I now try Apple for help. Any suggestions?

    On your phone, Settings>General>Reset>Reset Network Settings...does Personal Hotspot appear now?

  • Billing document and Excise invoice document number should be same

    Dear SD gurus
    kindly help me following client requirement
    in order to cash (domestic & Exports)
    and sto (intra and Inter plant to plant) scenarios the billing document number and excise invoices number should trigger  same number
    Example order- delivery- pgi- commercial invoice (VF01) --- billing document no.1234 here it should create automatically excise invoice no 1234
    in J1iin disply it show ref document no( billing document no: 1234.    & excise invoice no 1234

    Dear All,
    As per the standard it is not possible. But some times client says why two different numbers ranges we require same numbers ranges for both billing doc. & Excise invoice.
    Please go through the following link
    http://saptechsolutions.com/pdf/SDDocumentNumberRangeEnhancements.pdf
    Also check with the Abaper with explicit enhancement by maintaining the number range values in Custom table where we go when ever there is no option for(if client is not convincing) but which is not reccomandable but left out with no choice when client is demanding.
    Regards,
    S.Himavanth.

  • SAP SCRIPT Header text and Item text not printing in customized PO

    Hello Experts,
                          I have copied the standard MEDRUCK to ZMEDRUCK and customized the form according to the requirement.
    I want to print the header text and Item text in my form.
    For Header text I have used :
    /: INCLUDE &EKKO-EBELN& OBJECT EKKO ID F01
    Problem 1: The text what I enter in header text is flowing only when I hit on print preview without saving the form. Once I save the SAP SCRIPT  and click on print preview the field is appearing blank. I also tried to print the form, but the field is appearing blank even on the print out.
    Problem 2: For item text the field is concatenation of  EBELN & EBELP. Can anyone suggest me how to concatenate and fetch the text in item text.

    Hi,
        Im getting an error in my subroutine pool for i_xtline which is to fetch ITEM TEXT., It says its not a in any internal table nor defined as data. How can I proceed further. I have pasted my code below. Please check and revert ASAP
    PROGRAM  ZMEDRUCK_SUBP1.
    TABLES: EKPO, EKKO.
    FORM fetch_table_data TABLES in_tab STRUCTURE itcsy
                                 out_tab STRUCTURE itcsy.
    data xname like THEAD-TDNAME.
    data i_xtline like xtline.
    clear i_xtline.
    refresh i_xtline.
    CONCATENATE EKPO-ebeln EKPO-ebelp INTO v_item_text.
    MOVE v_item_text to ITEMTXT.
    CALL FUNCTION 'READ_TEXT'
      EXPORTING
      CLIENT                        = SY-MANDT
        id                            = F01
        language                      = EN
        name                          = ITEMTXT
        object                        = EKPO
      ARCHIVE_HANDLE                = 0
      LOCAL_CAT                     = ' '
    IMPORTING
      HEADER                        =
      tables
        lines                         = i_xtline
    EXCEPTIONS
       ID                            = 1
       LANGUAGE                      = 2
       NAME                          = 3
       NOT_FOUND                     = 4
       OBJECT                        = 5
       REFERENCE_CHECK               = 6
      WRONG_ACCESS_TO_ARCHIVE       = 7
      OTHERS                        = 8
    IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    ENDFORM.

  • BAPI_SALESORDER_CREATEFROMDAT2, Header and Item Level Ship-to

    I have a situation where I want to have different header and item level ship-to accounts on a sales order. When I use the BAPI_SALESORDER_CREATEFROMDAT2 to create the order by passing the Ship-to for header and Item in order_partners table, the header ship-to is not updated.
    This works fine if the header and item level ship-to are same.
    Any ideas.

    Hi Amit,
    put a breakpoint at the BAPI and check your PARTNERS table
    e.g. in the case, i am using iterms partner for line 10 & 20 that is different to the header table (000000)
             PARTN_ROLE PARTN_NUMB ITM_NUMBER TITLE           NAME
        1     AG        |EDICUS         |000000    |               |                         <
        2     WE        |DODGE         |000000    |               |                         <
        3     WE        |EDICUS         |000010    |               |                         <
        4     WE        |RWCUS         |000020    |               |                         <
    if your table is not like this , it won't work
    otherwise, post the relevant code and we can check
    kind regards
    Paul Quinn

Maybe you are looking for

  • Align Text in Textbox

    Just upgraded to CS4 when I'm used to working with CS2. I'm trying to align the text in the center of a textbox in InDesign. Now in CS2 the option shows up on the top when you select the textbox. Now that I'm trying to do it in CS4 I can't find the o

  • Perl adcfgclone.pl dbTier fails RC-50014: Fatal: Execution of AutoConfig

    in past we have been successfully doing Rapid clonning of R12. but now i am doing Rapid clonning and i am facing the error : 15% completed RC-50004: Fatal: Error occurred in ApplyDatabase: RC-50014: Fatal: Execution of AutoConfig was failed ERROR whi

  • Using two dimensional character array in a Jolt-Tuxedo call

    Hi, I have a Tuxedo service that returns a two dimensional character array as follows: char airports[234][3] ; There are 234 rows and each row is a character array of 3 characters. When I call this service using Jolt, how can I access these in the Ja

  • Dvorak and the Apple Keyboard

    Apple makes it easy to switch keyboard layouts, but not when it comes to the physical layout. 'Bout the only way to do that is by finding stickers with the letters and symbols on them to stick on the keys. And that's where I'm running into difficulti

  • Two useful new features in SL

    Hi, If you also write in other languages, you'll find two new useful features in Snow Leopard. First, under System Preferences, Language & Text, Input Sources... there's a new US International PC option that allows you to use accents just as in PCs;