Doc for Scrambling

Hi,
  We are going to do our  HR Scrambling by TDMS. Hence could you please share the documents to define scrambling rules and how to add those rules to HCM for PD & PA Package. Afcourse we already have some of the links and videos which was shared by Poonam Assudani. But it will be more helpful if we can get step by step document which explains more.. Please help..
Thanks,

Have you read SAP Test Data Migration Server Operations Guide?
Bruno

Similar Messages

  • Canceling a billing doc for which accounting doc not yet generated

    Hello,
    I have strange issue in canceling billing doc. What happened user created Intercompany billing doc IV against a delivery and accounting doc also released to FI. After that he found that value in that IV doc is not correct so he went and cancelled that doc IV and he created internal credit memo IG .But for this IG the accounting doc not generated due to FI period closing. Because the IV is created in the month of Oct and IG is created in the month of Nov'07.Due to this issue Accounting document not generated for this IG doc.
    But unfortunately by mistake he went cancelled the IG doc and it created IV again. Now what happened both IG and new IV created are showing in cancelled status. This is because if we cancel a billing doc for which accounting doc not created, then both doc will turning into cancelled status in doc flow. This is confirmed similar situation in my quality box and confirmed.
    Now can anybody come across this kind of issue and tell me what is the best approach to handle this kind of situation.
    Thanks
    Mathi

    Hi Nina
    As you are doing Delivery and then billing  with the service item category ZTAD , so go to VOV7 and check wheather the Billing Relevance ( Delivery related billing ) has been maintained or not .
    Also check wheather in VTLA & VTFL copy controls  ,  ZTAD item category has been maintained or not
    Regards
    Srinath

  • Where are the latest java docs for the 9i JDBC drivers

    Hi, I'm trying to locate the java docs for the latest 9i JDBC drivers. I have searched all over the otn and oracle sites and still haven't found them. Does anyone know where they can be found.
    Thanks,
    Simon

    I believe they're right on the download page where you download the drivers.
    Justin
    Distributed Database Consulting, Inc.
    www.ddbcinc.com

  • Error in Mapping of Data for Scrambling Rule due to Inconsistency detected in Mapping Engine PIFD

    Hi all,
    We are performing an HCM Data scrambling, however, in Package Setting phase, we are encountering error in mapping of data for scrambling rule, saying there are inconsistency detected in mapping Engine PIFD.
    We have already implemented and checked below SAP notes, but still no luck.
    1854557 - Missing PIFD objects or mappings after LT AddOn install.
    1665861
    - TDMS 4.0 - Collective note for Scrambling
    Please advise how to fix the issue? Project is at stand still due to this.
    OSS message already opened.
    Thanks and regards,
    Philip

    Hi
    This is bug 5195315, which looks to be fixed in a 10.2 patch. If you can pick up the latest 10.2 patch there is like 3 years of fixes worth picking up.
    Cheers
    David

  • Need Java API doc for the preference Manager class

    Where can I get Java Doc for the following classes
    import oracle.webcenter.peopleconnections.preference.Preference;
    import oracle.webcenter.peopleconnections.preference.PreferenceException;
    import oracle.webcenter.peopleconnections.preference.PreferencesManager;
    import oracle.webcenter.peopleconnections.preference.PreferencesManagerFactory;
    Thanks,
    Bala

    The API is the same (that's the whole point with Java), and last time I checked there were programs on Linux that can handle zipfiles and html files. :)
    So yes, use the same.
    (That is, unless you have downloaded the windows help format api docs. Then you need to download the regular html ones.)

  • Java Docs for the Module Process Classes

    Hi,
    I would like to start creating my own JDBC and file-based modules for interface development. I have found several  SDN contributions which step through the creation of these modules. These are very helpful.
    However, I have not yet found comprehensive documentation describing the classes used in module develpment. i.e.:
    - com.sap.aii.af.mp.module.Module
    - com.sap.aii.af.mp.module.ModuleContext
    - com.sap.aii.af.mp.module.ModuleData
    Does anyone know where to find the Java Docs for these classes? Or is there any other equivalent explanation of how to use these classes, their methods and fields?
    Any help would be greatly appreciated.
    Carl Engel
    CSC Australia

    Hi Carl,
    Another link for you
    http://help.sap.com/saphelp_nw04/helpdata/en/87/3ef4403ae3db12e10000000a155106/frameset.htm
    This says that the java documentation is available in the example adapter/module that is there with XI.
    I vaguely remembering seeing the docu..it was long back though..right now i donot have access to a system...
    Get the rar(java archive) that i talked about in the above link...
    Thanks,
    Renjith

  • Required Config and testing Docs for cash management/cash forecasting

    Hi All,
    My client need to implement cash management/cash forecasting ..
    Can anyone send the details Required Config and testing Docs for the same as earlier i have not worked in this area..
    Thanks in advance...
    Regards,
    Sandip

    Hello
    Please check the below link
    help.sap.com/bp.../J11_BB_ConfigGuide_EN_IN.doc - United States
    Thanks & Regards
    Phaneendra

  • Needed doc for PO creation

    hi all,
    can anyone give me steps for creating PO or screen shots.
    i need it urgently.
    i am new to this.
    i will award ur efforts.
    thanks
    sanjeev

    Hi Sanjeev,
    At first not able to understand what you need to create doc for po.
    in SAP below is the requriement to create PO, by considering you have organizational elements created.
    1) Material Master - create in MM01.
    2) Vendor Master - create in XK01
    3) Source List - ME01 } Source list & PIR is not mandatory to create a PO.
    4) PIR - ME11 }
    Then go to T-CODE ME21N as yogesh mentioned, enter your vendor system will ask for organizational data, enter co.code, pur group, pur organization.
    enter material code, qty, price, plant click on check & save, system will give you PO number.
    PS : Kindly note by asking a question you will get answer in this forum & it is professional to awarad points or not. don't think if you mention you will award points you get better response or quick response.
    Regards
    Rang

  • Need a link or doc for ARP

    Need a link or doc for ARP.
    Thanks in advance.
    Regards,
    Chandu

    Hello Chandu,
    TCP/IP illustrated by Stevens  is a good book
    see
    http://www.pcvr.nl/tcpip/arp_addr.htm#4_0
    Hope to help
    Giuseppe

  • BAPI to create Billing DOC for deliveries

    Hi All,
    I am looking for a BAPI to create a billing document based on the Shipment number.
    I found Bapi_BILLINGDOC_CREATEMULTIPLE,  but not working as expected.
    If anyone has used above or another bapi, please inform.
    Thx-Praveen

    Hi Praveen,
        i'm using same bapi and i'm able to create the invoice for the del.doc.
    for your ref. , here i'm attaching the code , please go through once.
              LS_BAPIVBRK-REF_DOC = DELIVERY_NO.
               CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
                 EXPORTING
                   INPUT  = LS_BAPIVBRK-REF_DOC
                 IMPORTING
                   OUTPUT = LS_BAPIVBRK-REF_DOC.
               LS_BAPIVBRK-REF_DOC_CA = '8'.  Shipment
               APPEND LS_BAPIVBRK TO LT_BAPIVBRK.
               CALL FUNCTION 'BAPI_BILLINGDOC_CREATEMULTIPLE'
                 TABLES
                   BILLINGDATAIN = LT_BAPIVBRK
                   ERRORS        = LT_BAPIVBRKERRORS
                   RETURN        = LT_BAPIRET1
                   SUCCESS       = LT_BAPIVBRKSUCCESS.
    after this do commit.
    you might miss the document category .
    Regards,
    Krishna

  • Error during determn of backend follow-on doc. for shopping cart

    I am using Classic Scenario in SRM 4.0 and R/3 ECC5.
    When I am making PO in SOCO against approved shopping cart I am facing following error and PO is not getting created.
    "Error during determn of backend follow-on doc. for shopping cart XXXXXXXXXX"
    I have Checked up following :
    1. Product Cat defined in backend and in Org plan attribute
    2. Object for Prod Cat Vs. PGR defined in SPRO
    3. Doc type in R/3 attribute defiend in BSA attribute of Org Plan.
    Still problem is coming.
    Any clue form some one.
    Sanjay

    Hi Sanjay/Vadim,
    We are also having a simialr issue..
    for SRM server 500 SAPKIBKS08...
    R/3 4.7
    "But this issue comes up only in the Test system and works fine with the Dev sys.." Double checked all the config steps and looks alike..
    We are using the classic scenario RFx process to create a backend PO from the bidding engine after the bid is accepted..
    it alwayz throws up the error SC/ Local Error..
    : Error during determn of backend follow-on doc. for shopping cart 0010000103 / 0000000001....
    we just started debugging from the web by breaking it at META_BAPI_DISPATCH and still looking into it..
    but in the mean while just want to know if this is more a config issue or and RFC connection issue..
    could you forward me any OSS notes if any regarding this issue..
    thanks in advance..
    Regards
    Manoj

  • PX Best Practice doc for vSphere?

    Is there a best practice doc for utilizing the PX devices in a vSphere environment?  Specifically I'm interested in 'Boot from SAN' for two vSphere 5.1 Host servers (RD630's) dual switch iSCSI connected to a PX12-450.
    If no Best Practice then perhaps a Config doc?
    Thanks

    Hi neilchapman,
    I am not too familiar with vSphere personally or how to boot from SAN, but as far as I know you create the iSCSI LUN on the NAS device and use vSphere to connect to the LUN. Do you need help with setting up the iSCSI LUN or with configuring vSphere? If you need assistance with vSphere, you might want to contact VMware support: http://www.vmware.com/support/vsphere/
    Have questions and need answers?
    Search the database for answers to FAQ's, software/driver downloads, tutorials, news, features and more!
    LenovoEMC Support & Downloads
    LenovoEMC North America Support Contact Page

  • Need a Doc for Case Management-Interaction center

    Hi all,
    I need a SAP doc for Case Management-Interaction center.
    Please send me on [email protected]
    Will surealy get points .
    Nice weekend

    Hi Babu,
    Please check the following SAP Help link:
    http://help.sap.com/saphelp_crm50/helpdata/en/89/c5be40d7e4cc38e10000000a155106/frameset.htm
    Hope this helps,
    Kind regards,
    KZ

  • Want to know the Mat docs for the stock in trans qty in MARD

    Hi Experts,
    I found 10 qty in stock in transfer(sloc) in MARD table for a material. I want to know what are all the material docuements posted against them descretely?
    Because:
    when I am doing the MB1B with movement type 313 for that material, the qty is appending on the existing qty, not knowing the details when and how much qty have been posted with in MARD.
    when I am using MSEG to fetch the Material documents posted with 313 movement type for that material. its showing so many material documents with 313 for that material docs for more qty.
    My questions is stock in transfer(sloc) qty should be equal to Mat docs with qty.
    Please help me to find the descretely.
    Thanks
    Srinvas

    Thanks for reply Kumar,
    Actually I have generated a report for pulling Mat docs which have been posted with 313 mov type by ignoring the corresponding docs with 314 and 315 using MARD and MSEG. I will use these Mat docs in further transaction like MBSU.
    Now my report is pulling all the mat docs with 313 for a particular material & plant combination when I am executing without any date range.
    But when I campare the Material in stock in trans (sloc) qty is 3 in MARD(for example), but my report is showing documents with more qty. (7 mat docs with total of 10 qty for ex.).  causing the data incosistency.
    Can you please help me in pulling the Material documents related to the stock in trans(sloc) qty only?
    Thanks
    srini

  • Convert DOC for PDF in ABAP

    Hi,
    How can I convert a file .doc for PDF in ABAP? Exist some Function?
    Thanks,
    Felipe Goes

    Welcome to SDN
    There is no standard tool avaialbe within ABAP to conver <b>.doc</b> file to PDF.
    if you know any activex based external tool to do the same you can incorporate the same in ABAP
    Regards
    Raja

Maybe you are looking for