DOC header

Hi
in DOC Header (F-02) there is doc text field is there after
enter some thing & posted the transaction later it is possible to
change , if it is possible then where it is ?

hi,
Cehck the tcode: FB02
give the doc number and cocd
Select the 'Header' icon
there u can change the doc text
Pls. assign points, if useful
Regards,
Sridevi

Similar Messages

Billing Doc-Header-Texts copy Accounting Doc-Hader Texts?

Dear gurus,
I it possible to copy Billing Doc.-header- Text1 to
Accounting Document>>>>>>"Doc. Header Text" field?

Hello,
the SAP note 301077 lists the available userexits in SD/FI interface.
If, for example, you want to fill a BSEG field of customer line, userexit EXIT_SAPLV60B_002 is the good one.
Instead if you want to fill a BSEG field of a G/L line, userexit EXIT_SAPLV60B_004 is the good one.
Best regards,
Ivano.

Fill Doc Header Text in VL01N

Hi,
I made the delivery with transaction VL01N and of course it is generate a Material Document (mov type 601). if i try to change the material document i can change the field Doc Header text (mkpf-bktxt). So my question is can i fill this field when i am making the Delivery in transaction VL01N?
Thank you for your interest in my question
Best Regards
João Fernandes

Hi Joas,
From your theard i could understand that you create a Delivery Note.
Delivery consists of three parts like
Picking, Packing and PGI( Post Goods Issue).
If you do picking and Packing the then save the delivery and delivery Number get Generated,But it doesnt mean Complete Delivery unless you Do the PGI.Once you Do the PGI Only the Material Document will get Generated.Yes while creation of Delivery you can maintian the text you required.
Hope this clarifies your doubt and Please Reward If Really Helpful,
Thanks and Regards,
Sateesh.Kandual

Doc header text

hi,
may i know why there is no doc header text(bktxt) in selection screen or dynamic selection of FB03 or FBL3N?
which tcode that displays fi document with the doc header text field in the selection screen?
thanks
rgds

Hi,
you can see in table level
TCode SE16
Table name BKPF :
FI Document header details stored in this table like document number, document date, posting date, entry date, reference, header text, exchange rate, document type, etc.,
For each document it will store only one entry in the table.
This may update if any changes made in the document header like change in the header text / reference field.
Other than the above fields, some other fields also get updated like document change date, document reversal details (document number, date reversed)etc.,
SKS

No leading zeros in the assignment field on a billing doc header

Can someone tell me how I can get the assigment field in a billing doc not to show any leading zero's so when the assigment field is populated in the accounting doc it will not show the zeros either .
At the moment I have the sales order PO set in copy control to show in the reference field and the assigment field of the billing doc header but need it to show no leading zeros in the accounting doc even if there is some in the SO.
I.E
sales orde PO no              Assignment field in billing doc             accounting doc
0000012345                      0000012345                                        0000012345
i need it to show NO zeros
                                           12345                                                  12345
any ideas

check this thread
VBRK-XBLNR not copied to BKPF-XBLNR in transaction VF11.
Note: Pls Text Removed
Edited by: Lakshmipathi on Nov 1, 2011 10:42 AM
Please dont ask for points in each of your suggestion and deviate the forum rules

BKPF-BKTXT (Doc header text source) for RV doc

Does anyone know if the doc header text for RV doc can be maintained anywhere in the source SD doc, so that it can be transfered to the RV accounting doc?
Thanks

Does anyone know if the doc header text for RV doc can be maintained anywhere in the source SD doc, so that it can be transfered to the RV accounting doc?
Thanks

Output type beside the output procedure while asigning to sales doc header?

Hi All,
T-Code v/43   (Sales Doc Header - output assignment )
Please can any one elaborate why do we need to specify output type beside the output procedure while asigning to sales doc header.
please explain me its use and significance.
thanks and regards/ashu

Hi Ashutosh,
            1. The output procedure will be one for total sales documents but if you want to assign different output types to different sales document types which are in same output procedure you can use this.
             2. You can restric the output type based on the document type.
I hope it will clear for you,
Regards,
Murali.

G/L account nos from accounting doc header

How to get the G/L account nos ( for amounts)from the accounting doc header, for a particular customer?
The above logic is needed for a Z report for a customers
Any guidance/help will be appreciated.
Thanking you.
Rgds
Sumanth G

Hi Sumanth,
Go to BSEG table and give the accounting document number in the feild BELNR and execute,
you will get the details and choose the field DMBTR and WRBTR according to your requirement.
Press F1 help on the screen and click tools icon you will get table name and field name.
Arshad

Word Doc Header Text Disappearing with Acrobat plugin

Hi,
I have a Word document with a header containing a graphic and text. When I use the Acrobat plug-in to create a PDF, the text does not display in the PDF, only the graphic. The graphic is a banner with text over it.
I have tried
Putting the text in as normal header text, within a text box, and within a table.
Sending the graphic to back and the text to front in Word.
The Print to PDF feature creates the header perfectly with the text over the graphic. However that feature does not allow me to create hyperlinks in the PDF for my table of contents, so is not the solution to my problem. (And honestly is just making me more crazy knowing it CAN work!)
An earlier version of this document did not have the same problem (I created a PDF from it several months ago, but recently updated the document - but not the header). Now, when I open the January version of the doc and create a PDF, the header is missing the text.
To my knowledge, I have not changed any settings in the Acrobat Plug-in Preferences or updated Word or the Acrobat plug-in since January.
Does anyone have any insight into why this might happen?
Thanks,
Jane

I was having the same issue on a large document, and deleting the objects wasn't an option. I discovered that unchecking Enable Accessibility and Reflow with tagged Adobe PDF on the Settings tab of the Acrobat PDFMaker Preferences menu solved the problem. My text boxes with fill color now show both the color and the text. (I'm running Word 2010 and Acrobat 11 Pro.)
I'm not sure I fully understand the functionality of the option I unchecked, but it does tag the document in the conversion process, which I prefer. But adding tags something that is easy to do once the document is created. If this is the best workaround, I'll take it, though it seems to be a bug in the Acrobat plug-in, since this didn't happen with the same document with the same settings previously. (I even tested on a Word document I have made no changes to and had created a PDF earlier. Sure enough, I recreated the behavior.)

Word doc header/footer

I am using cfcontent tag to generate the doc file. The
problem is generated doc file is not showing up the header and
footer. How do I display the header and footer in the word document
using cfcontent. Thanks

Here is the code:
<cfcontent type="application/msword">
<cfheader name="Content-Disposition" value="attachment;
filename=test.doc">
<html xmlns:o="urn:schemas-microsoft-com:office:office"
xmlns:w="urn:schemas-microsoft-com:office:word"
xmlns="
http://www.w3.org/TR/REC-html40">
<head>
<meta http-equiv=Content-Type content="text/html;
charset=windows-1252">
<meta name=ProgId content=Word.Document>
<meta name=Generator content="Microsoft Word 9">
<meta name=Originator content="Microsoft Word 9">
<link rel=File-List href="
http://127.0.0.1/CFApps/filelist.xml">
<title>doc</title>

<style>

</style>
</head>
<body lang=EN-US style='tab-interval:.5in'>
<div class=Section1>
enter text here
<![if
!supportEmptyParas]> <![endif]><o:p></o:p>
<![if
!supportEmptyParas]> <![endif]><o:p></o:p>
<![if
!supportEmptyParas]> <![endif]><o:p></o:p>
<![if
!supportEmptyParas]> <![endif]><o:p></o:p>
<![if
!supportEmptyParas]> <![endif]><o:p></o:p>
<![if
!supportEmptyParas]> <![endif]><o:p></o:p>
<![if
!supportEmptyParas]> <![endif]><o:p></o:p>
<![if
!supportEmptyParas]> <![endif]><o:p></o:p>
<![if
!supportEmptyParas]> <![endif]><o:p></o:p>
<![if
!supportEmptyParas]> <![endif]><o:p></o:p>
<![if
!supportEmptyParas]> <![endif]><o:p></o:p>
<![if
!supportEmptyParas]> <![endif]><o:p></o:p>
<![if
!supportEmptyParas]> <![endif]><o:p></o:p>
<![if
!supportEmptyParas]> <![endif]><o:p></o:p>
<![if
!supportEmptyParas]> <![endif]><o:p></o:p>
<![if
!supportEmptyParas]> <![endif]><o:p></o:p>
<![if
!supportEmptyParas]> <![endif]><o:p></o:p>
<![if
!supportEmptyParas]> <![endif]><o:p></o:p>
<![if
!supportEmptyParas]> <![endif]><o:p></o:p>
<![if
!supportEmptyParas]> <![endif]><o:p></o:p>
<![if
!supportEmptyParas]> <![endif]><o:p></o:p>
<![if
!supportEmptyParas]> <![endif]><o:p></o:p>
<![if
!supportEmptyParas]> <![endif]><o:p></o:p>
<![if
!supportEmptyParas]> <![endif]><o:p></o:p>
<![if
!supportEmptyParas]> <![endif]><o:p></o:p>
<![if
!supportEmptyParas]> <![endif]><o:p></o:p>
<![if
!supportEmptyParas]> <![endif]><o:p></o:p>
<![if
!supportEmptyParas]> <![endif]><o:p></o:p>
<![if
!supportEmptyParas]> <![endif]><o:p></o:p>
<![if
!supportEmptyParas]> <![endif]><o:p></o:p>
<![if
!supportEmptyParas]> <![endif]><o:p></o:p>
<![if
!supportEmptyParas]> <![endif]><o:p></o:p>
<![if
!supportEmptyParas]> <![endif]><o:p></o:p>
<![if
!supportEmptyParas]> <![endif]><o:p></o:p>
<![if
!supportEmptyParas]> <![endif]><o:p></o:p>
<![if
!supportEmptyParas]> <![endif]><o:p></o:p>
<![if
!supportEmptyParas]> <![endif]><o:p></o:p>
<![if
!supportEmptyParas]> <![endif]><o:p></o:p>
<![if
!supportEmptyParas]> <![endif]><o:p></o:p>
<![if
!supportEmptyParas]> <![endif]><o:p></o:p>
<![if
!supportEmptyParas]> <![endif]><o:p></o:p>
<![if
!supportEmptyParas]> <![endif]><o:p></o:p>
<![if
!supportEmptyParas]> <![endif]><o:p></o:p>
<![if
!supportEmptyParas]> <![endif]><o:p></o:p>
<![if
!supportEmptyParas]> <![endif]><o:p></o:p>
<![if
!supportEmptyParas]> <![endif]><o:p></o:p>
<![if
!supportEmptyParas]> <![endif]><o:p></o:p>
<![if
!supportEmptyParas]> <![endif]><o:p></o:p>
<![if
!supportEmptyParas]> <![endif]><o:p></o:p>
display text
</div>
</body>
</html>
The header and footer are showing up but now I am getting
following message in word "Some of the files in this web page
aren't in the correct location. Do you want to dowload them anyway
How to fix this error? Thanks.

How to populate the Ser Entry ext key into the Doc Head text in ML81N Txn??

Hello all,
My requirement is to to populate the Service Entry external key into the Document Header text.
( ServiceEntry - ERS Invoice (MRRL) ). through ML81N Transaction.I have checked for exits in ML81N as well as MIRO. those doesn't seem very convincing.
IF i see the field of Document header text where i need to populate the data it is
( BKPF-BKTXT ) how do i populate the data ( SE external field ) which is in ESSR table..?
if any one has some piece of code please send it across.
this is urgent pls help...........
Any pointers for this would be highly appreciated.
Thanks,
Sreekanth...

Please close this thread.Open new thread in forum [SAP Community Network Forums » ABAP Development » ABAP, General |;

Template inclusion/Javascript issue for doc header's custom fields

Hi all gurus,
premise: I'm absolutely a newbie about templates and Jscript.
I'm facing a strange behaviour for a field and I'd like to get your help on it, I'm running out of ideas.
I modified a custom field, a checkbox, which automatically makes a second custom field active and editable.
The logic is really simple: if the checkbox ( ZZ0LEGGE ) is checked, then the second field ( ZZ0DESCR ) is editable.
This is managed in the template by using a Jscript function that is triggered by the event OnClick related to the checkbox.
These two field are part of a template, say T1, which is used as an include in a pair of "main", custom templates, say T2 (additional header custom data) and T3 (document variant). These two screens are custom on an old SRM3 system.
When working on the additional header custom data (Template T2), both buttons work fine; each time the checkbox is checked/unchecked, the screen is updated and the second field turns into active/not active as consequence.
Working instead on the document variant screen (Template T3) leads to a wrong behaviour.
Checking/unchecking the checkbox doesn't refresh the screen accordingly to the selection, but loads the T2 template.
Guess there's something missing on the Javascript fuction associated with the checkbox in T1, because it will always trigger a refresh of T2, no matter the template in which it is included.
Here are the templates:
Template T1: [SAPLBBP_PDH_CUF 100 |http://pastebin.com/U39i5j7N]
Template T2: [SAPLBBP_CTR_UI_ITS 9001|http://pastebin.com/3AhKRjt7]
Template T3: [SAPLBBP_CTR_UI_ITS 9003|http://pastebin.com/4ZHtjz0r]
The checkbox field in T1 is called ZZ0LEGGE; the "controlled" field is instead ZZ0DESC.
Waiting for your help... thanks once again

Ok I found an interesting starting point to focus on... I changed the simple fuction associated to the event onClick(), triggered when the checkbox is set/unset, simply using the parameters for TargetOkCode used in Template 3:
function zOkRefresh(){
TargetSetOkCode('`PB_OKCH.okcode`','','`bbpformname`'); //new (works for T3)
// TargetSetOkCode('=ZCTR_CUST1','','BBPForm'); //old one (worked for T2)
and now the checkbox works properly in Template 3 but - obviously - stops working in Template 2.
So it seems that zOkRefresh should dynamically decide which parameters must be used, depending on the "upper" template:
- if the template that includes T1 is T2, then call TargetSetOkCode('=ZCTR_CUST1','','BBPForm'); if T1 is used in T3, then call TargetSetOkCode('`PB_OKCH.okcode`','','BBPForm').
Since I'm not able to write down the script described above, can anyone help me putting that IF statement in script code? How to determine what's the "including" template in Javascript?
Thanks again!

Partner determination for sales doc header

Dear all
I assigned 2 SH to 1SP in customer master but in sales order system allowing manually to select any SH which is not assigned to SP.
waiting ur reply

Hi Lucky,
To map your requirement please use the following path:
IMG> Sales and Distribution> Basic Functions > Partner Determination> Set Up Partner Determination--> Select (Set Up Partner Determination for Sales Document Header). Here Select the Standard order & select Partner function in Procedure. Here against Ship-to-party Line you can see the ORIGINAL TABLE coloumn Here select "C" - Partner function from customer master (table KNVP).
By doing the above settings the system will allow only partners from Customer master records.
Hope this works for you.
REWARD if it helps you!!
Regards,
Ajinkya

How to populate Doc Header Text Field & Ref Field in OASV Transaction?

Hello everyone,
I need to seek your help regarding, on how can I populate values in "Document Header Text Field" & "Reference Text Field" in OASV transaction, as these fields are invisible and are mandotory at document type.
(I know we can disable their status in the document type, but we don't want to do so).
Regards,
Saurabh Patni

Hi Mukthar,
Thanks for the quick reply.
I had tried to work out with substitution rule for the document type and transaction code, but still no use, the same error persists.
(In Subsitution I am going with constant value to be replaced), I am defining it for Callup point 1, but it is not working.

Copy Mat. Doc Header Text to FI Doc. Header Text

Dear Guru,
Is there anyway to transfer the Material Document Header Text to the Accounting Document Header Text?
I tried to use the FI Substitution, but somehow in the substitution exit, it just cannot get the material document number from there.
Any help would be greatly appreciated! Thank you!
Regards,
Chris

Hi Kenix, yes, that's what I mean. From the database record, I can see it actually works before.
But not sure if it is because we upgraded from 4.6C to ECC6, this function is gone. Any advise?

DOC header

Similar Messages

Maybe you are looking for