Doc/metadata search not using TREX - max files to search?

Hi,
We are creating WebDynPros searching a CM repository for documents with certain values on metadata properties. I know this is kind of "brute force" instead of using TREX classification.
Is there some way of saying how many documents in a folder structure can be searched in 2 seconds? Say we are using dual 2.8GHz CPU and 8 GB RAM in the server. Using KMC6.0.9.0.0.
I am also interested in knowing more about TREX APIs. I see they have not provided an official API - is there an unofficial with some guides?
All feedback is appreciated.
Message was edited by: Bjorn Bjornstad

Hi Bjorn,
> Is there some way of saying how many documents in a
> folder structure can be searched in 2 seconds?
Mainly, this will depend on your DB. I would suggest just to measure some information retrieval, that's done quite fast and will return far more exact values than any estimation.
> knowing more about TREX APIs. I see they have not
> provided an official API - is there an unofficial with
> some guides?
There is no offical nor any unofficial - as far as I know - API doc for direct TREX access. But what is documented is the indirect access via KM API, see for example https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/kmc/using the km indexmanagement apis for searching with trex.article
Hope it helps
Detlev

Similar Messages

Not Using Index on File Server When Accessing User Files Directly on Server

It appears to me that on a server with an indexed network share (Desktop Experience and Search Indexing roles/features installed), if you access the share directly on the server using its drive path, you can search the folders using the index, which
is much faster and supports finding words inside of the files in seconds). However, if you access the same shared folder via its network path from the server itself, the server ignores the index. I have this experience/problem across all shared folders on
the Windows 2012 R2 Server. Details and my most specific goal follows.
In addition to a laptop, I frequently work directly on a Windows Server 2012 R2 computer. We have Redirected Folders set up on DFS (for failover redundancy) so that my Documents folder is in:
\\network\redirections\user\documents. This all works fine on Windows 7 and 8 client computers connected to the network via Offline Files.
The problem is on the server itself. The server has Desktop Experience enabled and Windows Search is installed. If I navigate manually through the DFS root folder to my documents folder, I can search and it properly uses the index. This proves the location
is properly indexed. However, if I access the folders through the official "Documents" folder from the Folder Redirection (a network share pointing to the same server computer I'm working on), it performs an un-indexed search (slow and ignores file
contents, but does find files eventually if the search term is in their filename). Is there a way to force the server to use the indexed search on the Redirected Folders (my Documents folder in particular) when working on that server when logged in locally
on that server?
I suspect a workaround would be to go into the Registry and manually change the HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders to point to the local DFS folder instead of the network share name, but at least one problem
with this is then if I save files with links to other files (e.g., a linked Excel table in a PowerPoint, a mail merge to Access database in Word, etc.) on the server computer, those links will point to d:\DFSroot\... (a physical drive on the computer) instead
of \\network\redirections\user\... (a universally accessible network path) and so none of the other computers will be able to find the linked files, defeating one of the
major benefits of using Redirected Folders.
I can't believe that I need to choose between indexed searching and proper path names in saved files. Surely there is a way to use an indexed search on the server itself?
If you need any more info to help me troubleshoot, please let me know.
Thanks for any help,
Colin

Hi Colin,
It seems that we can not use indexed search on DFS shares. Windows Search works well when users directly access the server. That is, the server is not made available through Distributed File System (DFS).
For more detailed information, you could refer to the links below:
Windows Search Service, Clustered File Services, DFS, Win7 Libraries
https://social.technet.microsoft.com/Forums/windowsserver/en-US/31ac4c16-948b-4ca4-b18f-3a339cdfd5b9/windows-search-service-clustered-file-services-dfs-win7-libraries?forum=winserverfiles
Windows Browse and Organize Features
https://technet.microsoft.com/en-us/library/dd744693(WS.10).aspx
Best Regards,
Mandy
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

How do I turn off background ni file activity when not using Labview? files such as nimxs.exe, nipalsm.exe, nipalsm.exe, nisvcloc.exe, nicitdl5.exe

How do I turn off background ni file activity when not using Labview? I use labview rarely, and I also use my computer for demanding multimedia applications, including multitrack digital audio recording. I need to reduce as much background activity as possible, and taking a look with task manager I see files such as nimxs.exe, nipalsm.exe, nipalsm.exe, nisvcloc.exe, and nicitdl5.exe running even when I haven't used Labview (8 I believe). These files run even after I right click the NI icon on the lower right and turn off the application. I would like the computer to boot up without these files, and for the necessary files to be activated only when I start the program.
Can this be done or do I have to remove labview from the system to improve performance?
Thanks

Hello, those processes are part of running NI services that start when Windows boots. These processes serve varied purposes and stopping them can have undefined and unknown consiquences for your NI products. These products run at "normal" priority meaning that they should be preempted by any process running at a higher priority which I would expect your other application to be doing given their time sensitivity. That being said, in Windows XP (I can't speak for other OSes), you can lower their priorities even greater through task manager (right click the process»set priority) to further remove them from contention for resources. If you want to prevent them from running you can set the service startup type to "manual" in Control Panel»Administrative Tools»Services. Right click the process go to Properties and Under the General tab choose Startup Type»Manual. This will start up the processes only when something directly starts it up. LabVIEW will start these processes up as it attempts to use them. When you shut down LabVIEW you will need to manually shut down these processes through task manager. Again, doing this can cause problems with your NI products on your system and it is not advised.
Travis M
LabVIEW R&D
National Instruments

HT4796 i have successfully migrated the music but it just shows up in my files and has not updated my iTunes library which is still getting the music from iCloud and is not using the migrated files. Any ideas?

I have successfully used windows migration software to move my music library from a PC to my MacBook Air.
However the music files are just stored in my file system and have not updated my itunes files. Itunes is still getting the music down from icloud instead of using the music files.
Any ideas?

If you're using Windows Movie Maker and HP Photo to build slide shows, this is not an iPod touch issue (nor an iTunes issue), so I'd suggest you take up the problem on a web site that deals with Movie Maker or HP Photo issues. It's really not something we can help with in this forum.
If you're building this slide show on your iPod, please post back and tell us what app(s) you're trying to use, and whether the iPod app on your iPod touch shows and plays your songs correctly. Knowing the specific model of iPod you have and the version of iOS it's running will probably also help.
Regards.

VS2013 Page Inspector does not use external script files

If I use an external javascript file, the Page Inspector does not appear to run the javascript (as the styles created during runtime are not visible). If I run the web page outside of VS (e.g. IE) then it works.
<script type="text/javascript" src="border.js"></script>
However, if I use an internal script, the styles are created as expected.
<script type="text/javascript">$("div").css("border", "2px solid red").add("p").css("background", "yellow");</script>
Is the Page Inspector supposed to use external script files, and if not, are there plans to support it?

Hi,
Thank you for your post.
I am afraid that the issue is out of support range of VS General Question forum which mainly discusses
the usage of Visual Studio IDE such as WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
and Visual Studio Editor.
Because Page Inspector feature is more related to ASP.NET Application/Technology, in order to resolve your issue better,
I suggest that you can consult your issue on ASP.NET forum:
http://forums.asp.net/ for better solution and support.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Merge to Panorama in Photoshop not using edited RAW files

When I had LR4, I could Edit in > Merge to Panorama in PS and it would take the edited RAW files and merge them. Now in LR5 it seems to be taking the unedited RAW files and making the panorama. Is there a setting or something I'm missing in LR5?

Yes it is that simple. Just do a google search for Lightroom and Photoshop preference file locations and you should find them. The next time you start the programs, they will rebuild them. Of course, you'll have to re-enter any custom preference settings you've used. Good luck. Of course, when you think you've located them. Just rename them and move them into another folder first. That way, if you've picked the wrong file, you can easily move it back. Once things are working, you can just delete them.
BTW, this is a good troubleshooting tool for any mac applications that are acting wonky. Just delete that preference file, and more often than not, the problem will be fixed.

Weblogic12c and JDK 7 together not using login configuration file properly

Hello,
Little puzzled by this.
I ve installed JDK 7 along with Weblogic 12c and made a custom installation of Weblogic to use JDK 7 as the Local JDK
as mentioned in this doc
http://docs.oracle.com/cd/E24329_01/doc.1211/e24492/jdk7.htm
The JAVA_HOME is pointing to JDK 7
When i configure the login.config.url.1 under JAVA_HOME/jre/lib/security/java.security file to use our own specific file which is used for authentication against LDAP,
deploy the app and try to login, authentication fails(LoginException is thrown), like as if it s not understanding this file or the path or similar.
When i configure the same to use the JDK 6 that comes along with Weblogic 12c, everything is fine.....
Not sure where the problem lies.
Is there any other setting i need to do?
Any help is greatly appreciated.
The Exception thrown is
javax.security.auth.login.LoginException: java.util.MissingResourceException: Can't find resource for bundle sun.security.util.AuthResour
ces, key username: at java.util.ResourceBundle.getObject(ResourceBundle.java:393)
at java.util.ResourceBundle.getString(ResourceBundle.java:353)
at ........
Edited by: 902337 on Jan 6, 2012 11:08 AM

Just adding here that if i install JDK 6 outside of weblogic 12 and point to it, that also works fine.
The problem seems to be weblogic 12 pointing to JDK 7 only ...

Sendmail not using aliases.db file

I am using Sendmail 8.13.7. I just installed solaris 10 on a new sun server. I have created an /etc/aliases file. I have performed a "newaliases."
The aliases are not working. I get "User unknown." I have verified that aliases.db is there and that there are no errors upon creation. I have double/triple checked for spelling issues, etc. Sendmail simply is ignoring the aliases.
Any thoughts? Any extra info one may need in order to help out? Thanks!

The alias file location should be /etc/mail/aliases not /etc/aliases
Normally /etc/aliases is a symlink to it, but its possible that its become a separate file..
So check if your edits have shown up in /etc/mail/aliases

Libreoffice in KDE does not use KDE file dialogs

Hello,
I have libreoffice-4.2.4-1 from [extra] installed, together with libreoffice-kde4 4.2.4-1. But it still shows the GTK file open/save dialog instead of the KDE one.
I tried starting libreoffice with the following command that I got from the wiki:
SAL_USE_VCLPLUGIN=kde4 lowriter
But that does not change anything. I guess, the autodetection of libreoffice works well, and it is already using the QT style even without the SAL_USE_VCLPLUGIN variable set. It is just not using the right file dialogs. There is a setting libreoffice options (Tools--> Options --> General --> Use Libreoffice dialogs), but it is unchecked.
I checked the forums about this, but the only thing I could find were some threads about a bug with Libreoffice crashing on start. I experienced that bug too, and it seems to be gone now. Unfortunately, I find the missing KDE file dialogs even more annoying.

For me OOO_FORCE_DESKTOP=kde4 does not solve the problem either.
About arojas' link: Do I understand this correctly, that they disabled the KDE file dialog because it is possible that the application crashes in certain conditions due to some QT component? And they hardcoded that, so you cannot reactivate it using some option?

Delete TREX Trace Files and Turn TREX Off

Hi ,
We have massive amounts of TREX trace files that are taking up all of the memory. How do I delete these files? How do I know what files to delete? Also we are not using TREX in our BI server, how do I turn this OFF so that these files and never created?
Note from Moderator- don't use all caps in title as it is seen as shouting
Thanks
Edited by: Marilyn Pratt on Jan 27, 2009 12:19 PM

Hi Sanam,
For the TREX Preprocessor trace, You define the maximum file size for the input and output of documents in INI file - TREXPreprocessor.ini
The default size is set to 'Unlimited'
Please check the following values maintained in the configuration file.
Section: [ httpclient ]
Parameter: max_content_length
Default: Unlimited
Also read,
http://help.sap.com/saphelp_sm32/helpdata/en/1d/8d49cc304dd843a3a4a23d74888939/content.htm
Hope this is helpful.
Regards,
Varun

Using SELECT MAX to default to certain days

Gurus,
Right now, I use SELECT MAX("File Date"."Date")FROM "Subject Area" to pull the most recent date available. I'd like for this to pull the last two or three days of data available. Any suggestions?
I have this set under a report filter for the analysis. Thanks in advance!

Try this
SELECT File Date.Date saw_0, TOPN(File Date.Date, 3) saw_1, Facts."#Sales" saw_2 FROM "Subject Area" ORDER BY saw_0
Let me know updates
Edited by: Srini VEERAVALLI on May 6, 2013 5:10 PM
Your initial post talks about logical query from OBIEE, so I've logical query. try to put that in answers instead of running in Toad or sql developer etc..
Edited by: Srini VEERAVALLI on May 6, 2013 8:20 PM

Document search by file name using TREX

Hello,
We have implemented searching of documents using TREX. At the moment TREX finds all documents where search term is included BOTH in the file name (title) AND the content of the document. We need to limit the search results only to the documents where the search term is a part of the file name/title and NOT the content.
I know that searching for the term in the title and content is a standard functionality. Is there any way to limit searching for documents only to the title? Are there any parameters that I could place in the KM Document iView in the property 'query' that will limit searching to the file name?
We use SAP NW 7.0 SP18.
Best regards,
Beata

Hi Bobu,
I have followed the suggested solution with the predifined properties - "cm_displayname(/default)" - in a new Search option set and a new Search Component set containing only two aliases: search_predefined_props and standard_search, but it seems that searching is using the standard_search alias anyway. If I remove it from the search component, I do not have a full-search field for entering the value.
BR
Beata

HT203175 I have no problem signing on to iTunes my issue is once on the site I can not use the "search". It says there is a runtime error R6025 pure virtual function call. Has anyone had this problem and how do I fix it. Thanks

I do not have a problem getting in the iTunes stores. My issue is once on the site I can not use the "search". It says there is a pure virtual function call R6025. How can I solve this problem? Do I have to create a new account? Do I have to uninstall and re-install? Thanks

Thanks so much for your feedback. I really appreciate any input here.
If someone from Adobe could GUARANTEE that this problem would go away if I
purchased CS4, I would pony up the cash and do it. However, I'm skeptical
about that because I just saw someone else post a message on the forum today
who is running CS4 and getting the exact same runtime error as me.
I'll try un-installing and re-installing as Admin, and if that doesn't work,
maybe I can find a used copy of CS3.
In the meantime, I'm also wondering if a Photoshop file can carry any sort
of corrupt metadata inside it once it has errored out? Reason I ask is, I
had to port all of my old PSD files to the new computer, and I only seem to
be getting this error when I attempt to work on one of the files that
previously got the runtime error when they were sitting on my XP machine.
When I create new files from scratch on this new computer, they seem to be
working just fine (at least, for now).
If so, I would probably be smart to never open those troublesome
"errored-out" files again.

Custom Metadata is not in Search Result result set

Hello. I have created a custom metadata xDAMAuthor. I have used it in a rule for check-in profile. Also have check-in a content by filling this field. Now the search form has this metadata as one of its field and I can search by using this field, also the search result returns the aforesaid content which I have checked-in. When I am looking into the SOAP format of the GET_SEARCH_RESULTS then that metadata is not there in the row of the SearchResults resultset. But if I see the SOAP format of the DOC_INFO of that content the DOC_INFO resultset contains that metadata. How can I solve the problem?
Note: In the Admin Applet->Configuration Manager->Information Fields, Enable for Search Index is checked for this metadata.
Thanks.

the search result returns the aforesaid content which I have checked-in
And do you see you metadata in the results? I guess you don't. Unless you followed http://docs.oracle.com/cd/E23943_01/doc.1111/e10797/c03_finding_files.htm#CIHEFHAI and created a custom search result template.
I am sure that GET_SEARCH_RESULTS have all the metadata from returned items somewhere (probably in a result set), but I'm not sure what's returned - it could be very well the row as you see in the browser. Therefore, you might tried to use your custom search result template in your call (in fact, I think for a user always the default one is used).
Should be easy to give it a try.

Open PDF's in new window in document library when using "Find a file" search

I need to be able to open PDF's in a new window from a document library when using the "Find a file" search built into the document library "All documents" view. I currently have the following javascript on the page:
_spBodyOnLoadFunctionNames.push("setTargetBlank()");
function setTargetBlank()
{ $("a[href$='.pdf']").removeAttr('onclick').attr("target", "_blank");
This works great when going to the document library and navigating through the folders then clicking on a link.
The problem is when someone goes to the document library then uses the "Find a file" search and then they click on a link. The "Find a file" search does not do a postback (reload) of the page, therefore my javascript to find the PDF links
and make them open in a new window does not run for the links on the page.
I have read the following article but this does not seem to offer a solution that will work in this situation for SharePoint 2013 (Office 365): http://social.technet.microsoft.com/Forums/sharepoint/en-US/7ad3224c-3165-47ae-95bc-4f3928e2f9a8/opening-document-library-pdf-in-a-new-window-sharepoint-2013?forum=sharepointgeneral
I suppose the idea solution would be to somehow tap into the event that is fired when using "Find a file" search to run my javascript and update the links for the search results.
Can anyone offer any solutions to this issue?

Hi,
According to your description, my understanding is that you want to open PDF files in a new window from a document library when using the "Find a file" search.
As you said, the "Find a file" search does not do a postback (reload) of the page, therefore JavaScript to find the PDF links and make them open in a new window does not run for the links on the page.
I recommend to use JS link to achieve the goal. Create a JavaScript override file and upload the JavaScript file to the Master Page Gallery, and then set the JS Link property of the document library web part to point to the JavaScript file.
Here are some links about the JS link in SharePoint 2013 for you to take a look:
http://www.idubbs.com/blog/2012/js-link-for-sharepoint-2013-web-partsa-quick-functional-primer/
http://www.learningsharepoint.com/2013/04/13/sharepoint-2013-js-link-tutorial/
http://zimmergren.net/technical/sp-2013-using-the-spfield-jslink-property-to-change-the-way-your-field-is-rendered-in-sharepoint-2013
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

Doc/metadata search not using TREX - max files to search?

Similar Messages

Maybe you are looking for