DOC. NO. DOES NOT EXIST

Hi,
I created  three RFQ (me41). When I going to change or display these Rfq NO. the system gives error message the document does not exsit. message no- 06019,but i checked from no.range status(omh6). THE THREE NO. RANGE HAS ALEADY BEEN CREATED BY SYSTEM.Why it is not showing.

hi,
Please reffer this link.
po is saving but while dispaly error msg no 06019 po does not exit.
Error in Idoc
Thanking you.

Similar Messages

  • Pricing doc. does not exist in CRM Sales Doc Creation

    Hello gurus
    I am new to Sales within CRM and recently have set up the IPC.
    The IPC communicates with the CRM Server without any issues.  I have download all data required in the IPC.
    When I create a new sales order in CRM all is ok apart from the conditions tab, this shows Pricing doc. does not exist.  - Diagnosis
    You tried to access pricing information. However, a valid pricing document is not available.
    Any ideas?
    System Details
    CRM 4.0
    IPC 4.0 SP16
    Regards
    Barry

    Hi Barry,
    Please check first whether a pricing procrdure is correctly defined under Spro->CustomerRelationship Management->Basic Functions -> Pricing ->Determine Pricing Procedures.
    Here please check whether for the Sales Area(that you use in your order) an procing procedure is correctly defined. Otherewise pricing will not happen.
    To explain about Customer Pricing Procedure and Document Pricing Procedure
    The pricing procedure defined here in the above path is generaly a combination of 1)Document Procing  procedure and 2)Customer Pricing Procedure.
    Document Pricing Procedure - This is assocaited with the transaction type. Goto the transaction type details in spro and there you will find the association.
    Customer Pricing Procedure - This is associated with thh Business Partner. Select the BP(in sold to party role) and select "Sales Area" tab and in the "Billing" tab you will find this information.
    Note that the pricing procedure need not have both the Document Pricing Procedure and Customer Pricing Procedure defined.Any one can also be present. It depends on the business requirement.
    In your case can you please check whether the Pricing Procedure is prsent at all.
    Regards,
    Abishek

  • Preview error message doc "can not be saved because it does not exist"

    I have had a long standing problem with Preview. I know it is odd but around closing time every day, two of my computers both running 10.6.8 get error message when trying to save a new document. The document will be open on my screen and when I go to save it I get the error message that the file can not be saved because it does not exist. Some background that may be relevent:
    The documents that I create all day long (for at least 6 years) are output from a 4D database. I generate a report from the db and it opens in Preview as a PDF file. All day long I have no issues with creating and saving these docs. Then around 4-4:30 when many people are getting ready to leave two of our computers (one iMac 3.06GHz Intel Core i3 and an older macMini) have this problem. All you have to do to fix it is quit Preview and regen the doc. Unfortunately we often lose a lot of work because of it. I've tried anticipating when it will happen and restart Preview before creating the new doc but that only works occasionally.
    I suspect that it has something to do with people logging out (I am usually the last to leave) and perhaps some shared application is effected. Everyone does have their own copy of Preview and we all use separate 4D clients. I have searched the internet many times. I have found some similar problems that people have had with this error but not related to my own. Unfortunately both Preview and "the file can not be saved because it does not exist" are very general terms that bring up all kinds of unrelated things.
    I was going to try to delete the Preview Prefs file and start again but I can not find a plist for preview or any other file that is clearly the prefs. Searched the internet for that too but did not find it.
    Does anyone have any ideas on this odd problem?
    Thanks for reading!
    Susan

    To answer your questions:
    Are you loading them by using Preview>File>Open, double clicking, or dragging the file? None of the above. I am loading them through 4D. I generate a report on 4D and it opens in Preview.
    When this happens can you Open another PDF from the same location? Yes, see details below.
    Are you loading these PDFs from the Server or another Mac? From the server. The file is created by a 4D client that resides on my disk but the 4D server which it references is on another computer. I am still shared to that computer and my connection to 4D has not changed as far as I can tell.
    I found today (details written in response to another question) that when this happens I can save the file to my own desktop but not to the server. It makes me think there may actually be something happening with my connection. I wonder does a server do any realigning (for lack of a better word) of connections as some connections are lost? While I had the document open (the one that I could not save to the server) I went to the server and opened a document that existed there. I saved the file back to the server with a different name. No problem, it worked just fine. Now I am really confused....
    1) A PDF file generated by 4D that has not ever been saved to the server can not be saved to the server via Preview around the time that other people are disconnecting from the server and shutting down their computers for the day. Quitting Preview and regenning the document fixes the problem.
    2) The same PDF file that can not be saved to the server can be saved to my own disk.
    3) Other files that are already existing on the server can be saved with a different name to the server at the same time as a new document can not.
    I wish I felt like I was getting closer to the answer...
    Thanks for thinking about it.
    Susan

  • Accounting document created but the reference billing doc does not exist

    Hi All,
    We run a custom to program that generate a list accounting docs for clearing.
    Now our problem is that the reference billing doc of the accounting docs does not exist.
    It wasn't also archived.
    The accountings docs are very recent so it is really impossible that it was deleted from the system.
    We suspect that the accounting doc was created into the database while the billing doc wasn't.
    Plus the issue is intermittent.
    Please advise how we could fix this issue.
    Any suggestion will really be appreciated.
    Tnx.

    Hi Prashant,
    It sounds strange that same inspection lot has been made UD twice. Possibly he might have done for different Inspection Lots. While checking tables if you are querying by Inspection lot, do not do that.
    Another thing to understand is when UD made successfully for 105 Qty, why this is not appearing in UnRestricted stock. Some communication gap is there.
    As a last resort, you may need to cancel the UD by using program RQEVAC50  through SE38. And cancel the documents through MBST
    Jogeswara Rao K

  • \OPatch\docs\etc\config\inventory" does not exist.

    Dear One,
    I have up-graded my Database 11.2.0.1 to 11.2.0.3.while applying the OPatch below error is coming...
    The specified path is not an interim Patch shiphome
    Meta-data files are missing from the patch area
    Patch location = F:\app\Administrator\product\11.2.0\dbhome_2\OPatch
    Details = PatchObject constructor: Input file "F:\app\Administrator\product\11
    .2.0\dbhome_2\OPatch\etc\config\actions" or "F:\app\Administrator\product\11.2.0
    \dbhome_2\OPatch\etc\config\inventory" does not exist.
    ApplySession::process() cannot load PatchObject: PatchObject constructor: Input
    file "F:\app\Administrator\product\11.2.0\dbhome_2\OPatch\etc\config\actions" or
    "F:\app\Administrator\product\11.2.0\dbhome_2\OPatch\etc\config\inventory" does
    not exist.
    OPatch failed: PatchObject constructor: Input file "F:\app\Administrator\product
    \11.2.0\dbhome_2\OPatch\etc\config\actions" or "F:\app\Administrator\product\11.
    2.0\dbhome_2\OPatch\etc\config\inventory" does not exist.
    Locker::release()
    Log file location: F:\app\Administrator\product\11.2.0\dbhome_2\cfgtoollogs\opat
    ch\opatch2013-01-19_14-56-18PM_1.log
    Cleaning up the directory : "F:\app\Administrator\product\11.2.0\dbhome_2\.patch
    _storage\patch_unzip"...
    OPatch failed with error code = 73
    So,pls suggest me anyone how can i proceed the OPatch apply.........

    you don't use optach to upgrade your database , Please Read the below Document That describe usage of Optach
    http://docs.oracle.com/cd/B19306_01/em.102/b16227/oui8_opatch.htm
    You Must have patch Number : 10404530 which can be downloaded from https://support.oracle.com
    Similar thread
    Upgrade 11.2.0.1 to 11.2.0.3

  • APEX_APPLICATION_FILES: ORA-00942: table or view does not exist

    Hello,
    As my first APEX task I am attempting the upload/download demo on http://download.oracle.com/docs/cd/B32472_01/doc/appdev.300/b32469/up_dn_files.htm
    The ultimate goal is to store PDF files in the database.
    In order to complete step 1: To create an application using the Create Application Wizard:
    - I first created a user from SYSTEM called 'myapp'
    - Next I logged into 'myapp' to continue the exercise. (I am wondering if that is where I am going wrong... If so, please clarify)
    - Knowing that I would want to save the upload to a table I created a table with a BLOB
    I did the steps for the upload and ran the application - no errors to there.
    Next I needed to "To create a report on APEX_APPLICATION_FILES:".
    I started the wizard as instructed. When I pasted the SELECT ... FROM APEX_APPLICATION_FILES, I got the table or view does not exist. A quick review of the TABLES tab shows only the tables that I created. Not any of the system tables or views.
    I logged back in as SYSTEM and reviewed the 'rights' given the user 'myapp'. All were checked.
    I knew nothing of Oracle when I installed XE, so I took defaults or whatever the install doc said to do. Is that part of the problem? It is clear that I do not have rights to see that table, but I also do not see the table when logged in as SYSTEM.
    Any insight appreciated,
    Rick

    Thanks for the reply.
    Version is:
    Oracle Database 10g Express Edition Release 10.2.0.1.0 - Product
    PL/SQL Release 10.2.0.1.0 - Production
    CORE 10.2.0.1.0 Production
    TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
    NLSRTL Version 10.2.0.1.0 - Production
    Database      
    NAME     XE
    CREATED     10/13/2006 08:04:21 PM
    RESETLOGS_TIME     10/13/2006 08:04:25 PM
    Install Version 10.2.1015
    Regarding the code links, this one looks like what I need:
    DECLARE
    l_bfile BFILE;
    l_blob BLOB;
    BEGIN
    INSERT INTO tab1 (col1)
    VALUES (empty_blob())
    RETURN col1 INTO l_blob;
    l_bfile := BFILENAME('IMAGES', 'MyImage.gif');
    DBMS_LOB.fileopen(l_bfile, Dbms_Lob.File_Readonly);
    DBMS_LOB.loadfromfile(l_blob, l_bfile, DBMS_LOB.getlength(l_bfile));
    DBMS_LOB.fileclose(l_bfile);
    COMMIT;
    END;
    Is the 'BFILENAME' function that causes the 'get a filename' dialog box of Windows to open for the user to find which file to upload?
    I'm going off to look for a newer version of APEX, thanks.

  • Error: Selected disk does not exist (21) Module-SRE-700

    Already tried everything that the recovery cisco commands, anyone have idea how to solve the problem of the print shown in print?
    Initializing memory #2. Please wait...
    This may take a minute....
    Serial ATA Port 0 : Hitachi HTE545050B9A300                
    DDR Memory 4096 MB detected
    Intel(R) Core(TM)2 Solo CPU    L3400  @ 1.86GHz
    BIOS SM 3.52.8,  BIOS Build date: 02/08/2011
    System now booting...
    Please wait... 
    Please press P to select Primary Boot Loader ...  
              or S to select Secondary Boot Loader ...  
              or wait to boot from default configuration ...  
    Now booting from primary boot loader....  
    Authenticating boot loader....  
    Primary Boot Loader Authenticated - booting....  
    ServicesEngine boot-loader> install_key waas-accelerator-4.4.5c.4-k9.bin     
    Keyfile Size 202814577 over limit 32768 will not burn into flash
    ServicesEngine boot-loader> verify                                            
    Loading disk:/bzImage ... Unable to load image
    Error: Selected disk does not exist (21)
    Unable to boot image
    Unrecognized command
    ServicesEngine boot-loader>                                                   
    #service-module sm 1/0 session
    Trying 172.20.245.1, 2067 ... Open
    Please wait... 
    Please press P to select Primary Boot Loader ...  
              or S to select Secondary Boot Loader ...  
              or wait to boot from default configuration ...  
    Now booting from primary boot loader....  
    Authenticating boot loader....  
    Primary Boot Loader Authenticated - booting....  
    Please enter '***' to change boot configuration:
    Trying to reset Service Module SM1/0.
    May  7 11:27:33.055: %SRE_SM-6-STATE_CHANGE: SM1/0 changing state from SERVICE_MODULE_STATE_ERRQ to SERVICE_MODULE_STATE_SHDN
    Initializing memory #1. Please wait...
    Initializing memory #2. Please wait...
    This may take a minute....
    Serial ATA Port 0 : Hitachi HTE545050B9A300                
    DDR Memory 4096 MB detected
    Intel(R) Core(TM)2 Solo CPU    L3400  @ 1.86GHz
    BIOS SM 3.52.8,  BIOS Build date: 02/08/2011
    System now booting...
    Please wait... 
    Please press P to select Primary Boot Loader ...  
              or S to select Secondary Boot Loader ...  
              or wait to boot from default configuration ...  
    Now booting from primary boot loader....  
    Authenticating boot loader....  
    Primary Boot Loader Authenticated - booting....  
    Please enter '***' to change boot configuration:
    Detect and Initialize network device
    Backup current platform configurations....
    SRE step 1 - SM registration...
    Finding (hd1,3)/296e03bc-3236-4a68-a178-688e56400a1e, failed
    Local install not supported
    Response - no installation needed (len: 422)
    SRE Installation Not Needed
    Restoring orignial configuration...
    Updating flash with bootloader configuration.
    Please wait ................... done.
    May  7 11:29:03.331: %SM_INSTALL-6-INST_RBIP: SM1/0 received msg: RBIP Registration RequestLoading disk:/bzImage ... Unable to load image
    Error: Selected disk does not exist (21)
    Unable to boot image
    þ
    Initializing memory #1. Please wait...
    Initializing memory #2. Please wait...
    This may take a minute....
    Serial ATA Port 0 : Hitachi HTE545050B9A300                
    DDR Memory 4096 MB detected
    Intel(R) Core(TM)2 Solo CPU    L3400  @ 1.86GHz
    BIOS SM 3.52.8,  BIOS Build date: 02/08/2011
    System now booting...
    Please wait... 
    Please press P to select Primary Boot Loader ...  
              or S to select Secondary Boot Loader ...  
              or wait to boot from default configuration ...  
    Now booting from primary boot loader....  
    Authenticating boot loader....  
    Primary Boot Loader Authenticated - booting....  
    Please enter '***' to change boot configuration:
    Detect and Initialize network device
    Backup current platform configurations....
    SRE step 1 - SM registration...
    Finding (hd1,3)/296e03bc-3236-4a68-a178-688e56400a1e, failed
    Local install not supported
    Response - no installation needed (len: 422)
    SRE Installation Not Needed
    Restoring orignial configuration...
    Updating flash with bootloader configuration.
    Please wait ................... done.
    May  7 11:30:31.339: %SM_INSTALL-6-INST_RBIP: SM1/0 received msg: RBIP Registration RequestLoading disk:/bzImage ... Unable to load image
    Error: Selected disk does not exist (21)
    Unable to boot image
    ú
    Initializing memory #1. Please wait...
    Initializing memory #2. Please wait...
    This may take a minute....
    Serial ATA Port 0 : Hitachi HTE545050B9A300                
    DDR Memory 4096 MB detected
    Intel(R) Core(TM)2 Solo CPU    L3400  @ 1.86GHz
    BIOS SM 3.52.8,  BIOS Build date: 02/08/2011
    System now booting...
    Please wait... 
    Please press P to select Primary Boot Loader ...  
              or S to select Secondary Boot Loader ...  
              or wait to boot from default configuration ...  

    Hi,
    Opened a tac and managed to get the resolution of the problem. For those with the same problem reported by me above just follow the procedure below:
    1. uninstall existing SRE-V software
    http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/sre_v/1.5/user/guide/software.html#wp1055364
    2. run sm-hw-util to set sata mode to IDE
    http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/sre_v/1.5/user/guide/software.html#wp1091438
    3. configure a static, 32bit route to point the service module IP address to the SM slot/0 interface
    ip route 255.255.255.255 SM slot/0
    4. install WAAS:
    http://www.cisco.com/en/US/docs/app_ntwk_services/waas/waas/v421/module/installation/guide/wssmcfg.html#wp47040
    http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/sre_v/1.5/user/guide/software.html#wp1091438

  • SDKException$PluginNotFoundAtCMS: The plugin Enterprise does not exist in the CMS

    Post Author: NorfolkNChance
    CA Forum: JAVA
    Hi, I am trying for the first time to integrate my crystal reports into java J2ee.
    I have been following the tutorials on http://devlibrary.businessobjects.com/BusinessObjectsXIR2/en/en/BOE_SDK/boesdk_java_dg_doc/doc/boesdk_java_dg/HowToExamples3.html
    and think I am doing allright. I have imported all the jar I should do from the BO installation directories.
    so I am running this code below:
         String cms = "*********:6400";     String username = "administrator";     String password = "*********";     String auth = "Enterprise";
    //   Attempt logon. Create an Enterprise session
            try {   // manager object.   ISessionMgr sm = CrystalEnterprise.getSessionMgr();
       // Log on to BusinessObjects Enterprise   IEnterpriseSession enterpriseSession = sm.logon(username, password, cms, auth);   System.out.println("ddd");     } catch (SDKException e) {   // TODO Auto-generated catch block   e.printStackTrace();  }
    When it reaches the line in bold it throws an exception:
    [09/10/07 12:16:14:738 BST] 00000032 SystemErr R com.crystaldecisions.sdk.exception.SDKException$PluginNotFoundAtCMS: The plugin Enterprise does not exist in the CMS
    cause:com.crystaldecisions.enterprise.ocaframework.idl.OCA.oca_abuse: IDL:img.seagatesoftware.com/OCA/oca_abuse:3.2
    detail:The plugin Enterprise does not exist in the CMS
    The exception originally thrown was com.crystaldecisions.enterprise.ocaframework.idl.OCA.oca_abuse: IDL:img.seagatesoftware.com/OCA/oca_abuse:3.2
    is someone able to help me with this expection? Do I need to set something up on the sever?

    Post Author: Ted Ueda
    CA Forum: JAVA
    String auth = "secEnterprise";Sincerely,Ted Ueda

  • Table does not exist - uri access

    Hello,
    I tried default browsing interface http://myserver:8080/oradb/SCOTT/EMP and after entering the password to xdb the result is ORA-19202: Error occurred in XML processing ORA-00942: table or view does not exist
    I checked listener on the server and http defined with 8080, and http://myserver:8080/ works fine and shows xml directory. I also added object privileges for SCOTT on EMP - just to be sure.
    What could be the problem ? Oracle 10.2.0.
    Thanks,
    Marina

    In web browser interface, it is no SCOTT or any other user login, only XDB...
    Have you tried? ;-)
    Security and privileges are set via the xdbconfig.xml file, in this case, via the servlet and servlet mapping
    - <servlet-mapping>
      <servlet-pattern>/oradb/*</servlet-pattern>
      <servlet-name>DBURIServlet</servlet-name>
      </servlet-mapping>
    - <servlet-mapping>it says "an authenticated user"
    - <servlet>
      <servlet-name>DBURIServlet</servlet-name>
      <servlet-language>C</servlet-language>
      <display-name>DBURI</display-name>
      <description>Servlet for accessing DBURIs</description>
    - <security-role-ref>
      <role-name>authenticatedUser</role-name>
      <role-link>authenticatedUser</role-link>
      </security-role-ref>
      </servlet>
    - <servlet>It provides security via the following (http://download.oracle.com/docs/cd/B28359_01/appdev.111/b28369/xdb15dbu.htm#sthref1591)
    DBUriServlet Security
    Servlet security is handled by Oracle Database using roles. When users log in to the servlet, they use their database user name and password. The servlet checks to ensure that the user logging has one of the roles specified in the configuration file using parameter security-role-ref). By default, the servlet is available to role authenticatedUser, and any user who logs into the servlet with a valid database password has this role.
    The role parameter can be changed to restrict access to any specific database roles. To change from the default authenticated-user role to a role that you have created, you modify the Oracle XML DB configuration file.
    So...
    SQL> select * from dba_roles where role like 'AUT%';
    ROLE                           PASSWORD
    AUTHENTICATEDUSER              NO

  • Error ACLContainer: 65315 does NOT EXIST in  the Object Cache for parentID:

    Expert,
    I did the following steps to upgrade the OWB repository from 10g to 11g
    • Created a dummy workspace in the 11.2 repository
    • Created users in the destination environment
    • Run Repository Assistant against the 11.1 source database
    • Then selected *“Export entire repository to a file”* and selected the MDL(10g) to import
    After 99% of completing I have got the below error
    Error ACLContainer: 65315 does NOT EXIST in  the Object Cache for parentID: 65314
    Please let me know the solution.
    Thanks,
    Balaa...

    Hi I had the same error and worked on it for almost a week with no success but there is few work around for this try it it might work for you.
    Step 1>Run a health check on OWB 10.2 enviroment(make sure you clone your OWB 10.2 enviroment and then do this healthcheck ,these checks are tricky )
    refer
    Note 559542.1 Health Check of the Oracle Warehouse Builder 10.2 Metadata Repository
    This will give you info about your missing ACL
    Step 2> download these two scripts fixLostACLContainer.sql ,fixAllACLContainers.sql
    please refer :
    Note 559542.1 Health Check of the Oracle Warehouse Builder 10.2 Metadata Repository
    OWB 10.2 - Internal ERROR: Can not find the ACL container for object (Doc ID 460411.1)
    Note 754763.1 Repository Cleanup Script for OWB 10.2 and OWB 11.1
    Note 460411.1 Opening Map Returns Cannot find ACL Containter for Object
    Note 1165068.1 Internal Error: Can Not Find The ACL Containter For for object:CMPPhysical Object
    It might resolve this ACL issue but it did not work for me.
    If none of these work then
    Perform export from design center of OWB 10.2 and import through design center of OWB 11.2.(ONLY OPTION)
    It worked for me.
    Varun

  • Compiler exception - package does not exist?

    I am new to NWDS and J2EE.  I followed the steps in the tutorial as indicated in the below link:
    http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sapportals.km.docs/library/netweaver-application-server/_netweaver-application-server/a-c/Creating%20your%20First%20J2EE%20Application.pdf
    I did everything inside up to the last moment after I deployed my EAR and tried to run from the portal but got Application error.  I checked the defaultTrace log file from the portal server and notice these errors:
    #1.5 #001A6431E0FE0020000000750000155C0004B9B284863A19#1330076285575#com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl#sap.com/CalculatorEar#com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl#Guest#0##40C36AF65ECB11E18721000000978DDA#40c36af65ecb11e18721000000978dda-0#40c36af65ecb11e18721000000978dda#SAPEngine_Application_Thread[impl:3]_21##0#0#Error#1#/System/Server/WebRequests#Plain###application [Calculator] Processing HTTP request to servlet [jsp] finished with error.
    The error is: com.sap.engine.services.servlets_jsp.server.jsp.exceptions.CompilingException: Error while executing the compilation process: [G:/usr/sap/EPD/JC00/j2ee/cluster/server0/apps/sap.com/CalculatorEar/servlet_jsp/Calculator/work/jsp_Calculator1330076284538.java:41: package com.sap.examples.calculator.beans does not exist
              com.sap.examples.calculator.beans.CalcProxy calc = null;
                                                     ^
    G:/usr/sap/EPD/JC00/j2ee/cluster/server0/apps/sap.com/CalculatorEar/servlet_jsp/Calculator/work/jsp_Calculator1330076284538.java:42: package com.sap.examples.calculator.beans does not exist
                   calc = (com.sap.examples.calculator.beans.CalcProxy)pageContext.getAttribute("calc", PageContext.SESSION_SCOPE);
                                                                     ^
    G:/usr/sap/EPD/JC00/j2ee/cluster/server0/apps/sap.com/CalculatorEar/servlet_jsp/Calculator/work/jsp_Calculator1330076284538.java:48: package com.sap.examples.calculator.beans does not exist
                        calc = (com.sap.examples.calculator.beans.CalcProxy) Beans.instantiate(getClass().getClassLoader(), "com.sap.examples.calculator.beans.CalcProxy");
                                                                             ^
    3 errors
    The thing I don't understand is the "comp.sap.examples.calculator.beans" class has already been included inside the EAR (I used my zip tool to check the EAR file and confirmed it's there), why did the compiler still complain that the package does not exist?  Any great guys & gals out there can help this poor newbie who spent the past 5 hours searching for Google for answers but couldn't find any??
    Thank you.
    Brian

    Perhaps I should give out more information about this problem.
    The EAR file contains a WAR file and a JAR file. 
    The WAR file contains a JSP and it contains codes to refer to a java proxy class of package comp.sap.examples.calculator.beans.CalcProxy.
    So it seems the compilation error is triggered when it tries to compile the WAR file.
    I checked the structure of the WAR file using a zip tool.
    At the base it contains this:
    WEB-INF (a folder)
    Calculator.jsp (the JSP file)
    Inside the WEB-INF folder is these:
    classes (a folder)
    web-j2ee-engine.xml
    web.xml
    Inside the classes folder is a tree of subfolders to describe the structure of the CalcProxy class:
    classes -> comp -> sap -> examples -> calculator -> beans -> CalcProxy.class
    So the java class file and the JSP file is in the same bundle of the WAR file.
    Why the compiler is not able to find the class file inside the JSP?

  • Field T_STCD1 does not exist in form this erroe msg coming in smartform

    hi,
    in my smartform, if i give one set of input like, 1st qtr of 2008, vendor and compcode, its displaying the value.
    but if i give the input like 1st qtr of 2007, vendor and some other compcode its giving some error like
    field T_STCD1 does not exist in form .
    this error coming after printpreview and not displaying.
    how can i debug it.
    can any one help me...........plz
    its very urgent.
    thanks.

    report  zmm_vat_ex_cert message-id zz                        .
                             TABLE DECLARATION                           *
    tables:  bseg , tvko.
    *Intenal Tables Declarations                                           *
    types: begin of it_address_type .
            include structure zvat_vendor.
    types :end of it_address_type.
    types : begin of it_address_info_type.
            include structure zadrc_table.
    types: end of it_address_info_type.
    types : begin of it_desig_type.
            include structure zmm_vat_sign.
    types: end of it_desig_type.
    types: begin of it_bkpf_type,
          bukrs  type bkpf-bukrs,
          belnr  type bkpf-belnr,
          gjahr  type bkpf-gjahr,
          blart type bkpf-blart,
          bldat  type bkpf-bldat,
          xblnr type bkpf-xblnr,
          awkey  type bkpf-awkey ,
          end of it_bkpf_type.
    types : begin of it_bseg_type,
          bukrs like bseg-bukrs,
          belnr like bseg-belnr,
          gjahr like bseg-gjahr,
          bschl like bseg-bschl,
          mwskz like bseg-mwskz,
          shkzg like bseg-shkzg,
          wrbtr like bseg-wrbtr,
          sgtxt type bseg-sgtxt,
          end of it_bseg_type.
    types: begin of it_rseg_type,
           ebeln like ekpo-ebeln,
           ebelp like ekpo-ebelp,
           bukrs like bkpf-bukrs,
           txz01 type ekpo-txz01,
           wrbtr type rseg-wrbtr,
           end of it_rseg_type.
    data:begda type d, endda type d.
    types: begin of it_item_type.
            include structure zitem_vat.
    types:end of it_item_type.
    data: it_rseg type table of it_rseg_type,
           wa_it_rseg like line of it_rseg.
    data: gt_addr type table of it_address_type.
    data gt_addr_info type table of it_address_info_type.
    data gt_bkpf type table of it_bkpf_type.
    data gt_bseg type table of it_bseg_type.
    data:
          gt_tvko type standard table of tvko,
          gt_item type table of it_item_type,
          h_itab type table of it_bseg_type,
          it_desig type table of it_desig_type,
          temp_item type table of it_item_type .
    data:wa_addr like line of gt_addr,
         wa_addr_info like line of gt_addr_info,
         wa_bkpf like line of gt_bkpf,
         wa_bseg like line of gt_bseg,
         wa_item like line of gt_item,
         wa_h_itab like line of h_itab,
         wa_it_desig like line of it_desig,
         wa_temp_item like line of temp_item,
        wa_tvko LIKE LINE OF gt_tvko.
         wa_tvko type tvko.
         Data Declaration                                                *
    data: sumtotal type bseg-wrbtr, "rbkp-waers ,
          sl_no type zmm_vatex_sno-serial_no,
          fiscal_year type string,
          fm_name type rs38l_fnam ,
          w_q_flag(5),
          w_quarter type string ,
          close_date type sy-datum ,
          fiscal type sy-datum, fiscal_nxt type sy-datum,
          gv_belnr type bkpf-belnr,
          gv_gjahr type bkpf-gjahr.
    data: ca_quarter type i.
    data: l_adrnr type t001-adrnr.
    data wa_vatex_sno type zmm_vatex_sno.
    data: q(1).
    data: stdtext(25).
    S E L E C T I O N   S C R E E N                                     *
    selection-screen begin of block b1 with frame title text-s01.
    select-options: s_date for sy-datum obligatory no-extension.
    parameters : vendor type lfa1-lifnr obligatory ,
                 compcode type bkpf-bukrs obligatory.
    select-options taxcode for bseg-mwskz obligatory default 'VI'.
    selection-screen end of block b1.
    at selection screen
    at selection-screen on s_date.
      if s_date-low0(4) <> s_date-high0(4).
        message e023 with text-e01.
      endif.
    *get calendar quarter  using the month entered in From date.
    *calculate the fiscal year and quarter
      if s_date-low4(2) > '0' and s_date-low4(2) <= '3' .
        ca_quarter = 1.
        fiscal0(4) = s_date-high0(4) .
        fiscal_nxt0(4) = s_date-high0(4) - 1.
        concatenate  fiscal_nxt2(2) '-' fiscal2(2)  into fiscal_year .
        concatenate 'last quarter of year ' fiscal_nxt0(4) '-' fiscal0(4)
        into w_quarter separated by space .
        q = '4'.
      elseif ( s_date-low4(2) > '3' and s_date-low4(2) <= '6' ).
        ca_quarter = 2.
        fiscal0(4) = s_date-high0(4) + 1.
        fiscal_nxt0(4) = s_date-high0(4).
        concatenate  fiscal_nxt2(2) '-' fiscal2(2)  into fiscal_year .
        concatenate '1st quarter of year ' fiscal_nxt0(4) '-' fiscal0(4)
         into w_quarter separated by space .
        q = '1'.
      elseif ( s_date-low4(2) > '6' and s_date-low4(2) <= '9' ).
        ca_quarter = 3.
        fiscal0(4) = s_date-high0(4) + 1.
        fiscal_nxt0(4) = s_date-high0(4).
        concatenate  fiscal_nxt2(2) '-' fiscal2(2)  into fiscal_year .
        concatenate '2nd quarter of year ' fiscal_nxt0(4) '-' fiscal0(4)  INTO
         w_quarter separated by space .
        q = '2'.
      elseif ( s_date-low4(2) > '9' and s_date-low4(2) <= '12' ).
        ca_quarter = 4.
        w_quarter = '3rd quarter of year'.
        fiscal0(4) = s_date-high0(4) + 1.
        fiscal_nxt0(4) = s_date-high0(4).
        concatenate  fiscal_nxt2(2) '-' fiscal2(2)  into fiscal_year .
        concatenate '3rd quarter of year '  fiscal_nxt0(4) '-' fiscal0(4)  INTO
         w_quarter separated by space .
        q = '3'.
      endif.
    *get first and last day of quarter by fetching calendar quarter and year in FM
      call function 'HR_99S_GET_DATES_QUARTER'
        exporting
          im_quarter = ca_quarter
          im_year    = s_date-low+0(4)
        importing
          ex_begda   = begda
          ex_endda   = endda.
    *validate the input dates is start and end of quarter
      if  s_date-low <> begda or  s_date-high <> endda.
        message e023 with 'Enter quarter begin and end dates only'.
      endif.
    *get last day of next month. for close date
      endda = endda + 1.
      call function 'RP_LAST_DAY_OF_MONTHS'
        exporting
          day_in            = endda
        importing
          last_day_of_month = close_date
        exceptions
          day_in_no_date    = 1
          others            = 2.
      if sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      endif.
         Start of Selection
    start-of-selection.
    *CNO is specific to a Quarter/ Company code/ Vendor.
      unpack vendor to vendor.
      clear:sl_no, wa_vatex_sno.
      select single * from zmm_vatex_sno into wa_vatex_sno where from_date
      eq s_date-low and to_date eq s_date-high and vendor eq vendor
        and  compcode eq compcode.
      if sy-subrc eq 0.
        sl_no = wa_vatex_sno-serial_no.
      else.
        select max( serial_no )  from zmm_vatex_sno into wa_vatex_sno-serial_no  WHERE
          from_date  eq s_date-low and to_date eq s_date-high and compcode eQ compcode.
        if sy-subrc = 0.
          sl_no = wa_vatex_sno-serial_no  + 1.
        else.
          sl_no =  1.
        endif.
        wa_vatex_sno-from_date = s_date-low.
        wa_vatex_sno-to_date = s_date-high.
        wa_vatex_sno-vendor = vendor.
        wa_vatex_sno-compcode = compcode.
        wa_vatex_sno-serial_no = sl_no.
        insert zmm_vatex_sno from wa_vatex_sno.
      endif.
    *data selection from bkpf by date,fiscal and compcode
      refresh gt_bkpf.
      select bukrs
            belnr
            gjahr
            blart
            bldat
            xblnr
            awkey
            into  table  gt_bkpf from bkpf
            where bukrs eq compcode and
            budat in s_date and gjahr eq fiscal+0(4).
      check not gt_bkpf[] is initial.
      refresh gt_bseg.
      select bukrs
             belnr
             gjahr
             bschl
             mwskz
             shkzg
             wrbtr
             sgtxt from bseg into table gt_bseg
        for all entries in gt_bkpf where
              bukrs eq compcode and
              mwskz in taxcode and
              lifnr eq vendor and
             belnr = gt_bkpf-belnr and
         gjahr = gt_bkpf-gjahr  and shkzg = 'H'.
    selection without vendor   and posting key 40     *
      refresh h_itab.
      select bukrs
             belnr
             gjahr
             bschl
             mwskz
             shkzg
             wrbtr from bseg into table h_itab
             for all entries in gt_bseg
             where bukrs = gt_bseg-bukrs and
             belnr = gt_bseg-belnr and
             mwskz = gt_bseg-mwskz and
             gjahr = gt_bseg-gjahr  and
             ( bschl = '40' or bschl = '21' ).
      if sy-subrc = 0.
    deduct the amount if posting key is 40 for PO based docs
        clear wa_h_itab.
        loop at h_itab into wa_h_itab where bschl = '40'.
          clear wa_bseg.
          read table gt_bseg into wa_bseg with key belnr = wa_h_itab-belnr.
          if sy-subrc = 0.
            read table gt_bkpf into wa_bkpf with key belnr = wa_h_itab-belnr.
            if wa_bkpf-blart <> 'KR'.
              wa_bseg-wrbtr = wa_bseg-wrbtr - wa_h_itab-wrbtr.
            endif.
            modify  gt_bseg  from wa_bseg
             transporting wrbtr where belnr = wa_bseg-belnr
             and bschl = wa_bseg-bschl  .
          endif.
          clear wa_h_itab.
        endloop.
    deduct the amount if posting key is 21 for non-PO based docs
        clear wa_h_itab.
        loop at h_itab into wa_h_itab where bschl = '21'.
          clear wa_bseg.
          read table gt_bseg into wa_bseg with key belnr = wa_h_itab-belnr.
          if sy-subrc = 0.
            read table gt_bkpf into wa_bkpf with key belnr = wa_h_itab-belnr.
            if wa_bkpf-blart = 'KR'.
              wa_bseg-wrbtr = wa_bseg-wrbtr - wa_h_itab-wrbtr.
            endif.
            modify  gt_bseg  from wa_bseg
             transporting wrbtr where belnr = wa_bseg-belnr.
          endif.
          clear wa_h_itab.
        endloop.
      endif.
    final internal table
      clear wa_item. refresh gt_item. clear wa_bseg.
      loop at gt_bseg into wa_bseg.
        read table gt_bkpf into wa_bkpf with key belnr = wa_bseg-belnr .
        if sy-subrc = 0.
          move :
           wa_bkpf-xblnr to wa_item-xblnr,
                wa_bkpf-belnr to wa_item-belnr,
                wa_bkpf-bldat to wa_item-bldat,
               wa_bseg-wrbtr to  wa_item-wrbtr.
        endif.
    *selections for item description
        refresh it_rseg.
        select  ekpoebeln ekpoebelp ekpobukrs  txz01 rsegwrbtr
          into table it_rseg
          from rseg join ekpo
          on rsegebeln = ekpoebeln
          and rsegebelp = ekpoebelp
          and rsegbukrs = ekpobukrs
            where rsegbelnr = wa_bkpf-awkey(10) and rseggjahr = wa_bkpf-gjahr AND
            ekpo~bukrs = wa_bkpf-bukrs.
        if sy-subrc = 0.
          loop at it_rseg into wa_it_rseg.
            wa_item-txz01 = wa_it_rseg-txz01 .
            if sy-tabix <> 1.
           wa_item-wrbtr = wa_it_rseg-wrbtr .
              wa_item-wrbtr = space .
            endif.
            append wa_item to gt_item.
          endloop.
        else.
          wa_item-txz01 = wa_bseg-sgtxt.
          append wa_item to gt_item.
        endif.
        clear: wa_bseg, wa_item.
      endloop.
    *if records not found give message.
      if  gt_item[] is initial.
        message e000(vz) with text-x01.
      endif.
    calculate the sumtotal
      loop at gt_item into wa_item.
        sumtotal = sumtotal + wa_item-wrbtr .
      endloop.
         Selecting supplier address                                     *
      select single * from tvko into wa_tvko where vkorg = compcode.
      append wa_tvko to gt_tvko.
      if wa_tvko-vkorg = '2014'.
        stdtext = 'Z_2014_SOFTEX'.
      elseif wa_tvko-vkorg = '2006'.
        stdtext = 'Z_2006_SOFTEX'.
      else.
        stdtext = wa_tvko-txnam_adr.
      endif.
      select lifnr
             name1
             name2
             ort01
             ort02
             pfach
             stras
             regio from lfa1 into table gt_addr
             where lifnr eq vendor  .
         Selecting sez address                                         *
    SELECT SINGLE adrnr FROM t001 INTO l_adrnr WHERE bukrs EQ compcode.
    SELECT name1
          name2
          city1
          city2
          post_code1
          post_code2
          street
          house_num1
          FROM adrc INTO TABLE gt_addr_info
          WHERE addrnumber = l_adrnr.
         Information for designation                                    *
      select  * from zmm_vat_sign into table it_desig where company = compcode
         Call Function module SSF_FUNCTION_MODULE_NAME                *
      call function 'SSF_FUNCTION_MODULE_NAME'
        exporting
          formname                 = 'ZMM_VAT_EX_CERT'
      VARIANT                  = ' '
      DIRECT_CALL              = ' '
       importing
         fm_name                  = fm_name
    EXCEPTIONS
      NO_FORM                  = 1
      NO_FUNCTION_MODULE       = 2
      OTHERS                   = 3
      if sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      endif.
         Call Function module fm_name                                  *
      call function fm_name
        exporting
      ARCHIVE_INDEX              =
      ARCHIVE_INDEX_TAB          =
      ARCHIVE_PARAMETERS         =
      CONTROL_PARAMETERS         =
      MAIL_APPL_OBJ              =
      MAIL_RECIPIENT             =
      MAIL_SENDER                =
      OUTPUT_OPTIONS             =
      USER_SETTINGS              = 'X'
          doc_num                    = sl_no
          quarter                    = w_quarter
          date                       = s_date-high
          sumtotal                   = sumtotal
          close_date                = close_date
          fiscal_year              = fiscal_year
          ca_quarter             = q
          text_name             = stdtext
    IMPORTING
      DOCUMENT_OUTPUT_INFO       =
      JOB_OUTPUT_INFO            =
      JOB_OUTPUT_OPTIONS         =
        tables
          itab                       = gt_item
          it_address                 = gt_addr
          it_infoaddress              = gt_addr_info
          it_designation             = it_desig
          it_tvko                   = gt_tvko
    EXCEPTIONS
      FORMATTING_ERROR           = 1
      INTERNAL_ERROR             = 2
      SEND_ERROR                 = 3
      USER_CANCELED              = 4
      OTHERS                     = 5
      if sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      endif.

  • 10g - File does not exist: .../Apache/Apache/htdocs/dsl/apex/apex_admin

    We are on 10.2.0.3, and created a separate (dedicated) ORACLE_HOME for the App Exp 3.0.1 installation.
    We used the OUI to install the Companion version of Apache (HTTP server 1.3) on our IBM AIX5L machine 9119-595 (64 bit) and we set all appropriate conf files (dads.conf, httpd.conf, don't have a 'marvel' file) to port 3232. Successfully ran the command "EXEC DBMS_XDB.SETHTTPPORT(3232);" in the App Exp repository DB. We restarted Apache (HTTP server).
    The Oracle Apache HTTP web page successfully displays at http://bbbbb.oooo.com:3232/ .
    When trying to start the App Exp Aministrator at "http://bbbbb.oooo.com:3232/dsl/apex/apex_admin" we get "The page cannot be found" (HTTP 404 - File not found, Internet Explorer).
    The Apache error log "/Apache/Apache/logs>view error_log.1205496000" contains the following lines:
    [Fri Mar 14 15:21:31 2008] [error] [client 10.30.24.9] [ecid:  1205526091:10.9.8.244:5546130:0:485,0] File does not exist: /seamnt/prd203
    /u01/oracle/product/10_2_http_server/Apache/Apache/htdocs/dsl/apex/apex_admin
    Here is our dads.conf file contents (password hidden, but does work to login to APEX_PUBLIC_USER via SQL*plus):
    # ============================================================================
    # mod_plsql DAD Configuration File
    Alias /i/ "/u01/oracle/product/10_2_http_server/Apache/Apache/images/"
    AddType text/xml xbl
    AddType text/x-component htc
    <Location /pls/apex>
    Order deny,allow
    PlsqlDocumentPath docs
    AllowOverride None
    PlsqlDocumentProcedure wwv_flow_file_mgr.process_download
    PlsqlDatabaseConnectString bbbbb.oooo.seagate.com:3232:okdedw1 ServiceNameFormat
    PlsqlNLSLanguage AMERICAN_AMERICA.AL32UTF8
    PlsqlAuthenticationMode Basic
    SetHandler pls_handler
    PlsqlDocumentTablename wwv_flow_file_objects$
    PlsqlDatabaseUsername APEX_PUBLIC_USER
    PlsqlDefaultPage apex
    PlsqlDatabasePassword XXXXXXX
    Allow from all
    </Location>
    All the following conf files seem to contain the suggested references to other conf files:
    httpd.conf
    # Include the Oracle configuration file for custom settings
    include "/seamnt/prd203/u01/oracle/product/10_2_http_server/Apache/Apache/conf/oracle_apache.conf"
    "plsql.conf" 37 lines, 1722 characters
    include /seamnt/prd203/u01/oracle/product/10_2_http_server/Apache/modplsql/conf/dads.conf
    include /seamnt/prd203/u01/oracle/product/10_2_http_server/Apache/modplsql/conf/cache.conf
    "cache.conf" [Read only] 21 lines, 728 characters
    PlsqlCacheDirectory /seamnt/prd203/u01/oracle/product/10_2_http_server/Apache/modplsql/cache
    That directory "dsl" does NOT exist under the "htdocs" directory.
    Any ideas what's wrong ("File does not exist: .../Apache/Apache/htdocs/dsl/apex/apex_admin) ?
    That directory "dsl" does NOT exist under the "htdocs" directory.
    okdev9a#:/u01/oracle/product/10_2_http_server/Apache/Apache/htdocs>ls -la
    total 754
    drwxr-x--- 9 oracle dba 2048 Mar 13 15:04 .
    drwxr-x--- 16 oracle dba 1024 Mar 13 15:16 ..
    -rw-r----- 1 oracle dba 5927 Jan 22 2005 NFIntro.htm.de
    -rw-r----- 1 oracle dba 5864 Apr 26 2005 NFIntro.htm.en
    -rw-r----- 1 oracle dba 6049 Jan 22 2005 NFIntro.htm.es
    -rw-r----- 1 oracle dba 6049 Jan 22 2005 NFIntro.htm.es_ES
    -rw-r----- 1 oracle dba 5962 Jan 22 2005 NFIntro.htm.fr
    -rw-r----- 1 oracle dba 5962 Jan 22 2005 NFIntro.htm.fr_CA
    -rw-r----- 1 oracle dba 5864 Apr 26 2005 NFIntro.htm.htm
    -rw-r----- 1 oracle dba 5989 Jan 22 2005 NFIntro.htm.it
    -rw-r----- 1 oracle dba 5782 Jan 22 2005 NFIntro.htm.ja
    -rw-r----- 1 oracle dba 5902 Jan 22 2005 NFIntro.htm.ko
    -rw-r----- 1 oracle dba 5973 Jan 22 2005 NFIntro.htm.pt_BR
    -rw-r----- 1 oracle dba 5788 Jan 22 2005 NFIntro.htm.zh_CN
    -rw-r----- 1 oracle dba 5806 Jan 22 2005 NFIntro.htm.zh_TW
    -rw-r----- 1 oracle dba 5927 Jan 22 2005 OHSDemos.htm.de
    -rw-r----- 1 oracle dba 6708 Apr 26 2005 OHSDemos.htm.en
    -rw-r----- 1 oracle dba 6049 Jan 22 2005 OHSDemos.htm.es
    -rw-r----- 1 oracle dba 6049 Jan 22 2005 OHSDemos.htm.es_ES
    -rw-r----- 1 oracle dba 5962 Jan 22 2005 OHSDemos.htm.fr
    -rw-r----- 1 oracle dba 5962 Jan 22 2005 OHSDemos.htm.fr_CA
    -rw-r----- 1 oracle dba 6708 Apr 26 2005 OHSDemos.htm.htm
    -rw-r----- 1 oracle dba 5989 Jan 22 2005 OHSDemos.htm.it
    -rw-r----- 1 oracle dba 5822 Jan 22 2005 OHSDemos.htm.ja
    -rw-r----- 1 oracle dba 5902 Jan 22 2005 OHSDemos.htm.ko
    -rw-r----- 1 oracle dba 5973 Jan 22 2005 OHSDemos.htm.pt_BR
    -rw-r----- 1 oracle dba 5788 Jan 22 2005 OHSDemos.htm.zh_CN
    -rw-r----- 1 oracle dba 5806 Jan 22 2005 OHSDemos.htm.zh_TW
    drwxr-x--- 2 oracle dba 1024 Mar 13 14:57 Tab_files
    drwxr-xr-x 2 oracle dba 96 Mar 13 14:59 _pages
    drwxr-x--- 2 oracle dba 96 Mar 13 15:04 dav_public
    drwxr-x--- 2 oracle dba 1024 Mar 13 14:59 error_docs
    -rw-r--r-- 1 oracle dba 15326 Mar 13 15:04 index.html.de
    -rw-r--r-- 1 oracle dba 14643 Mar 13 15:04 index.html.en
    -rw-r--r-- 1 oracle dba 15724 Mar 13 15:04 index.html.es
    -rw-r--r-- 1 oracle dba 15724 Mar 13 15:04 index.html.es_ES
    -rw-r--r-- 1 oracle dba 15481 Mar 13 15:04 index.html.fr
    -rw-r--r-- 1 oracle dba 15481 Mar 13 15:04 index.html.fr_CA
    -rw-r--r-- 1 oracle dba 14643 Mar 13 15:04 index.html.html
    -rw-r--r-- 1 oracle dba 15199 Mar 13 15:04 index.html.it
    -rw-r--r-- 1 oracle dba 18542 Mar 13 15:04 index.html.ja
    -rw-r--r-- 1 oracle dba 17428 Mar 13 15:04 index.html.ko
    -rw-r--r-- 1 oracle dba 15472 Mar 13 15:04 index.html.pt_BR
    -rw-r--r-- 1 oracle dba 16961 Mar 13 15:04 index.html.zh_CN
    -rw-r--r-- 1 oracle dba 17134 Mar 13 15:04 index.html.zh_TW
    drwxr-x--- 2 oracle dba 1024 Mar 13 14:57 ohs_images
    drwxr-x--- 2 oracle dba 1024 Mar 13 14:57 sol
    drwxr-x--- 2 oracle dba 1024 Mar 13 14:57 win
    Any ideas what's wrong ("File does not exist: .../Apache/Apache/htdocs/dsl/apex/apex_admin) ?
    Thanks!!!
    Scott.
    Message was edited by: Scott McMillan
    user625897

    Your dads.conf says
    <Location /pls/apex>
    but you say
    "When trying to start the App Exp Aministrator at "http://okdev9a.okla.com:3232/dsl/apex/apex_admin" "
    Try http://okdev9a.okla.com:3232/pls/apex
    instead of dsl/apex..
    Cheers,
    Vidar

  • Excise Invoice creation error -Billing document does not exists

    Dear Experts,
    I have created supplementary sales order, billing with refernece through sales order by VF01.
    Now I want to create Excise Invoice but system gives error Billing Document does not exists
    I have checked billing document in VBRK table & it is showing in table.
    My item categroy is L2N -and set it to C
    I have assigned Billing type under Outgoing excise invoice ->Assign billing type to delivery type still my excise invoice is not generating.
    Pl. guide me.
    Thanks
    Trupti

    Resolved my problem.
    Actually in Billing item categroy if you put SD Doc. Catg. as M you can do excise invoice even if you have not created the
    outbound delivery.
    So cycle will be Supplementary Sales Order->VF01 with ref. to SO->J1IIN -Excise invoice creation.
    Thanks to all.
    Trupti.

  • Excise invoice does not exist in supplying plant

    Dear all,
    We are having a scenario where in we are doing stock transfer from one plant to other the system gives an error message that the excise invoice does not exist in supplying plant.
    Created a PO for stock transfer, posted GI against it, created excise invoice in J1IS with transaction type other. We are having separate excise registeration for the two plants.
    Secondly request to kinldy let me know what account enteries should be generated when we post excise invoice for the supplying plant.
    Regards,
    mahesh.

    Hi,
    In case of STO process using SD the process flow is like
    1. Create a PR against the supplying Plant (ME51N)
    2. Create a STO (PO) with ref to the PR (ME21N)
    3. Create a Outbound Delivery with ref to the STO. (VL10B/VL10D)
    4. Create a Proforma Inv (VF01) No Acc docs gets generated.
    5. Create a Excise Inv for the supplying Plant (J1IIN) Accounting Doc gets Generated.
    The Accounting Entries at the time of Excise Inv creation for the supplying Plant is:
    Excise Duty Expenses on  Sale                               Dr
    Excise Duty  Payable                                    Cr                    
    Sec.& Higher Edu Cess Payable on Excise               Cr                                            
    Edu .Cess Payable on Excise                    Cr
    At the time of Goods Receipt at plant
    1.Good Receipt at Receiving Plant (MIGO) - No Accounting docs get generated only Qty update takesplace.
    2. Capture & post the excise @ the Receiving Plant during MIGO by entering the Supplying Plant excise inv as reference.
    Hope it is Clear.
    Revert incase of any queries.
    Regards,

  • REP-52005: The specified key userlogin does not exist in the key map file.

    Hi,
    I am using oracle 11g report server. I am getting the error of REP-52005: The specified key userlogin does not exist in the key map file.
    I updated the user_string in cgicmd.dat file. My cgicmd.dat file content is below
    ; OracleAS Reports Services                       ;
    ; CGICMD.DAT                                      ;
    ; Example CGICMD.DAT Mapping file                 ;
    ; Syntax: 
    ;      KEY : VALUE
    ; Where:
    ; KEY - the first argument of the rwservlet URL request (case sensitive).
    ; VALUE - command line parameters and/or special parameters.
    ; Keys can be referenced in the following ways:
    ;    1. Parameter on command line to the reports servlet
    ;          e.g. http://machine/servlet/rwservlet?KEY
    ;    2. Parameter on command line to a reports jsp
    ;          e.g. http://machine/mydir/myreport.jsp?KEY
    ;    3. Within a reports jsp - in the rw:report custom tag
    ;          e.g. <rw:report parameters="KEY">
    ; In addition to the Reports Server command line parameters, VALUE can include special parameters
    ; represented as "%X", where X identifies the parameter. Currently recognized special
    ; parameters:
    ;  %0 - %9 - 0..9 arguments from original rwservlet URL request. Note that %0 refers to the key itself.
    ;  %* - entire contents (all arguments) of original rwservlet URL request.
    ;  %D - request users to input database userid everytime they run the report.
    ;  %P - request for report parameter form in HTML format. It generates the PARAMFORM=HTML
    ;       construction on the first submission of the URL and PARAMFORM=NO upon parameter form submission.
    ; CGICMD.DAT Usage Notes
    ;   1. Multiple keys in this file MUST be separated by an EXTRA empty line.
    ;   2. Extra spaces are ignored. Multi-line entries allowed.
    ;   3. Lines starting with ";" character are treated as a comments.
    ;   4. Comments within a key or key value are NOT allowed.
    ;   5. NLS language support is provided and can be used (encoding should match the one
    ;      used in HTML request - no language conversion of any kind is attempted.
    ;   6. For %P special parameter, HTML format is by default mapped to the HTMLTABLE format in this release.
    ;      The HTML format in the future may be mapped to the HTMLCSS format.
    ;;;;;;;;;;;; Example Key Entries
    ;  Example 1:  Run a simple breakb report and output to HTML
    orqa: report=breakb.rdf destype=cache desformat=html server=repserver
    ; Example 2: prompt for userid the first time, then use database userid stored in the cookie subsequently.
    report_defaultid: report=breakb.rdf destype=cache desformat=html server=repserver
    ; Example 3: use %D to require user authentication every time
    report_secure: report=breakb.rdf destype=cache desformat=html server=repserver1 %D
    ; Example 4:  Take all arguments from URL and send it to the reports server
    run: %*
    ; Example 5:  Run breakb report with HTML parameter form.
    breakbparam : report=breakb.rdf destype=cache desformat=html server=repserver userid=scott/tiger@mydb %P
    ; Example 6: take all URL arguments, and also generate a HTML parameter form  
    runp: %* %P
    ; Example 7: Run an Express Report. Replace <MYHOST> with the name of the machine running the Express server. The
    ; builder on-line help explains the rest of the parameters (the /sl, st etc. etc.)
    express: report=my_expr_rep express_server="server=ncacn_ip_tcp:<MYHOST>/sl=1/st=1/ct=0/sv=1/" desformat=htmlcss userid=scott/tiger@mydb destype=cache server=repserver
    ;;;;;;;;;;;; Keys for Reports Demos
    ; Using default/in-process server.
    ; JSPs
    ;charthyperlink_ias: userid="scott/tiger@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=%DBHOSTNAME%)(PORT=%DBPORT%))(CONNECT_DATA=(SID=%DBSID%)))" %*
    ;charthyperlink_ids: userid=scott/tiger@ %*
    ;barcodeweb:         userid=oe
    ;parmformjsp:        userid=oe
    ;tutorial:           userid=oe
    ; Paper Reports
    ;xmldata:            userid=oe report=inventory_report.rdf destype=cache p_filelocation="http://%HOSTNAME%:%OC4JPORT%/reports/examples/xml_pds/scripts/" desformat=pdf
    ;barcodepaper:       userid=oe report=shippingmanifest.rdf destype=cache desformat=pdf
    ;distributionpaper:  userid=oe report=inventory_report_dist.rdf distribute=yes destination=exampledistribution.xml
    ;pdfenhancements:    userid=oe report=utf8test.rdf destype=cache desformat=pdf
    userlogin : userid=SYMFINBTOTEST@fin10r21 %*
    As in the above file i have added a key as userlogin at the end of the file. But the reports server does not take the key that i have given. I followed the same steps provided in oracle docs. I used "showmap" to check the cgicmd file that is used by the reports
    http://aspirevm8-17.aspiresys.com:9002/reports/rwservlet/showmap?server=bluQubeReportsAtLocalEnv&destype&userid=SYMFINBT…
    It shows me the content of the cgicmd.dat file and it also shows my updations. But in the "Parsed Map File Entries" it does not show my key value pair
    Parsed Map File Entries
    Return to Top
    Key Name
    Value
    runp
    %* %P
    breakbparam
    report=breakb.rdf destype=cache desformat=html server=repserver userid=scott@mydb %P
    report_defaultid
    report=breakb.rdf destype=cache desformat=html server=repserver
    run
    report_secure
    report=breakb.rdf destype=cache desformat=html server=repserver %D
    express
    report=my_expr_rep express_server="server=ncacn_ip_tcp:<MYHOST>/sl=1/st=1/ct=0/sv=1/" desformat=htmlcss userid=scott@mydb destype=cache server=repserver
    orqa
    report=breakb.rdf destype=cache desformat=html server=repserver
    Please help me to to make the key being populated here and being used by the reports server.
    Thanks,
    Priya

    uncomment #KEYPMAPFILE=CGICMD.DAT. remove the #
    then for development set
    reloadkeymap=yes (same file - rwservlet.properties).
    Now it should reload everytime. (otherwise for every change u need to restart oc4j_bi_forms)
    (For * production* may be you want to set reloadkeymap=no once all testing is done)
    see cgicmd.dat for many examples of using keymap file
    [ All Docs for all versions ]
    http://otn.oracle.com/documentation/reports.html
    [ Publishing reports to web - 10G ]
    http://download.oracle.com/docs/html/B10314_01/toc.htm (html)
    http://download.oracle.com/docs/pdf/B10314_01.pdf (pdf)
    [ Building reports - 10G ]
    http://download.oracle.com/docs/pdf/B10602_01.pdf (pdf)
    http://download.oracle.com/docs/html/B10602_01/toc.htm (html)
    [ Forms Reports Integration whitepaper 9i/10g ]
    9i - http://otn.oracle.com/products/forms/pdf/frm9isrw9i.pdf
    10g - http://www.oracle.com/technology/products/forms/pdf/10g/frm10gsrw10g.pdf
    http://www.oracle.com/technology/products/forms/techlisting10g.html
    ---------------------------------------------------------------------------------

Maybe you are looking for