Doc Reset and Reversal thruFBRA -Option not available-Directlyreversing doc

Dear All,
I'm trying to reverse the payment document through FBRA. Normally It will give the options as resetting & resetting and reverse. Now when I'm reversing the document it is directly reversing instead of giving me an option as specified above. Request you all to guide me further in this regard.
Thanks & Regards,
Anand.Inguva

Hi,
FBRA is a standard transaction and it should (ideally) be giving both the options of
- Resetting
- Resetting and reverse
There could be no reason why it is not providing these options. Please check with SAP but however, before that please double check on a variety of documents to confirm that only one option is shown.
Good Luck!
SAP Solutioning

Similar Messages

Exchange 2007 Client Access and Receive Connector options not available (EMC)

We have a SBS2008 server with Exchange 2007
When I open the EMC and go to Server Configuration --> Client Access, none off the options are available (greyed out). OAW, OWA, ActiveSync are working without any problems. Outlook anywhere enabled shows False,when I try to reanable it I get the following
error message:
Summary: 1 item(s). 0 succeeded, 1 failed.
Elapsed time: 00:00:01
SERVERNAME
Failed
Error:
The Active Directory object for virtual directory 'IIS://SERVERNAME.domainname.local/W3SVC/3/ROOT/Rpc' on 'SERVERNAME' could not be created. This might be because the object already exists in Active Directory. Remove the object from Active Directory, then re-create
it.
Unexpected Error
Warning:
Outlook Anywhere will be enabled on your Client Access server after a configuration period of approximately fifteen minutes. To verify that Outlook Anywhere has been enabled, check the application event log on server SERVERNAME.
Exchange Management Shell command attempted:
enable-OutlookAnywhere -Server 'SERVERNAME' -ExternalHostname 'mail.domainname.net' -DefaultAuthenticationMethod 'Basic' -SSLOffloading $false
Elapsed Time: 00:00:01
Also the receive connectors are not visible from EMC, it's just blank under receive connectors, but mails are received without any problems.
Does someone know a way to resolve this?

That worked!
I created a new account and placed it into the Exchange Organization Administrators role, now I'm able to see all the options normally.
I also re-added the original account to the EOA role but I still don't see the options there. When I go to Organization Configuration I also get the following error message:
You do not have permissions to read the security descriptors on CN=servername,CN=Server......DC=domainname, DC=local. It was running command 'get-ExchangeAdministrator'
So it must be a permissions issue. The strange thing is that under Exchange Administrators I can see my account and it has the role Exchange Organization Administrators.

1142N unable to open Web GUI and CMD line options not available

I am currently trying to configure two 1142N APs (AIR-LAP1142N-A-K9) to be stand alone APs. I have followed the PDFs
http://www.cisco.com/en/US/customer/docs/wireless/access_point/12.3_8_JA/configuration/guide/s38frst.html#wp1103248
and
http://www.cisco.com/en/US/customer/docs/wireless/access_point/12.3_2_JA/configuration/guide/s32frst.html#wp1103310
I set up the switch to provide DHCP and confirmed that each AP is indeed assigned an IP address. I can also ping each device. However when trying to browse to the GUI it fails to connect. So I tried to configure it via the CMD line. The enable mode does not give the option to configure interfaces as you would expect in enable mode nor does it give the option to enter global exec. example of the out put below.
AP8843.e178.0ee0>
AP8843.e178.0ee0>enable
Password:
AP8843.e178.0ee0#?
Exec commands:
cd               Change current directory
clear            Reset functions
clock            Manage the system clock
crypto           Encryption related commands.
debug            Debugging functions (see also 'undebug')
delete           Delete a file
dir              List files on a filesystem
disable          Turn off privileged commands
enable           Turn on privileged commands
exit             Exit from the EXEC
fsck             Fsck a filesystem
help             Description of the interactive help system
led              LED functions
lock             Lock the terminal
login            Log in as a particular user
logout           Exit from the EXEC
lwapp            lwapp exec commands
mkdir            Create new directory
monitor          Monitoring different system events
more             Display the contents of a file
name-connection Name an existing network connection
no               Disable debugging functions
ping             Send echo messages
pwd              Display current working directory
release          Release a resource
reload           Halt and perform a cold restart
rename           Rename a file
renew            Renew a resource
rmdir            Remove existing directory
send             Send a message to other tty lines
set              Set system parameter (not config)
show             Show running system information
systat           Display information about terminal lines
terminal         Set terminal line parameters
test             Test subsystems, memory, and interfaces
traceroute       Trace route to destination
undebug          Disable debugging functions (see also 'debug')
upgrade          Upgrade software
verify           Verify a file
where            List active connections
It seems that the IOS on this device does not have the capability to configure the AP as stand alone or that it has been disabled. How do I get into the CMD line to configure the AP for deployment?
Secondly since I could not configure it via the CMD line I attempted to connect to it via the GUI like I said above. This fails. I ran an NMAP to find out what is open and found that nothing but port 23 is open. What is the deal here? Is the web GUI shut off by default? Am I just totally missing something? I think I dies a little inside after this...help please?

AP8843.e178.0ee0#sh ver
Cisco IOS Software, C1140 Software (C1140-RCVK9W8-M), Version 12.4(18a)JA, RELEASE SOFTWARE (fc4)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2008 by Cisco Systems, Inc.
Compiled Fri 21-Nov-08 01:28 by prod_rel_team
ROM: Bootstrap program is C1140 boot loader
BOOTLDR: C1140 Boot Loader (C1140-BOOT-M) Version 12.4(18a)JA3, RELEASE SOFTWARE (fc1)
AP8843.e178.0ee0 uptime is 2 hours, 16 minutes
System returned to ROM by power-on
System image file is "flash:/c1140-rcvk9w8-mx/c1140-rcvk9w8-mx"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
cisco AIR-LAP1142N-A-K9    (PowerPC405ex) processor (revision B0) with 98294K/32768K bytes of memory.
Processor board ID
PowerPC405ex CPU at 586Mhz, revision number 0x147E
Last reset from power-on
LWAPP image version 3.0.51.0
1 Gigabit Ethernet interface
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address:
Part Number                          :
PCA Assembly Number                  :
PCA Revision Number                  : A0
PCB Serial Number                    :
Top Assembly Part Number             :
Top Assembly Serial Number           :
Top Revision Number                  : A0
Product/Model Number                 : AIR-LAP1142N-A-K9
Configuration register is 0xF

Identifying the orginal Doc for reset and reverse documents

hi,
When there is a cheque return from the customer, what is the practice is to reset and reverse the original receipt posted in the system. but the issue is once the original document is reset and reverse there is no way of identifying the invoice details of the receipt created (f-28). Please some one help to find out those details.
Thanks and Regards
Gayani

HI,
Up to that point ok, say If i reverse the receipt and from the reversal document number I can see the "reversed with number" but the issue is I want to know the payment usage (original documents) of the "revered with number".
Say There is receipt document number 1800000000
and the bank return this cheque, so I want to reverse the receipt number 18000000, so I use the transaction FBRA to reset and reverse the document. but the customer want to know the original documents (invoice) of the receipt number 180000000?
I can not get those information from the system
Gayani

FBRA, select 'Reset and Reverse' option only.

In FBRA, how to restrict user to select only 'Reset and Reverse' button?
Only authorized user can use 'Reset only' button.
Regards,
Anek

Hi,
This can be acheived using standard variants.
In standard variants, you can set authorization group and restrict granting of user access
Refer the link [Standard Variants|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a023f383-83b1-2b10-3983-9fbbcbfd11f1] to make the menu items disabled.
Regards,
Sridevi
Edited by: Sridevi on Aug 10, 2010 5:07 PM

HT5312 option to reset my security question is not available for me.

The option to reset my security questions in not available for me, please fix, thank you.

You need to contact Apple, either through the link in that article or by phoning them.
(79401)

FBRA-While reset and reversal I am facing problem

While reset and reversal using FBRA I am getting the following error.
Document includes already cleared items - reversal not possible
Message no. F5 308
Diagnosis
A reverse posting clears all line items that are managed as open items. This is not possible if one of the items in question has already been cleared by another method.
System Response
Error message.
Procedure
If you really want to reverse the document with the number you specified, display the cleared items and reset all those items for which you can find clearing document numbers. Then repeat the reverse transaction.
*I am trying to do the following steps for reset and reversal,*
step 01- Posted Customer Invoice on 01-Jan-2011with RV doc with Rs-1200: Doc 111111
Step 02- Posted Customer downpayment on 01-Jan-2011 with DZ doc with Rs-1200: Doc No 2222222
Step 03- Clear Customer line items on 10-Jan-2011 with AB doc with Doc no- 3333333
Trying to reverse Cleared Item (i.e. Doc No 3333333) with T-Code FBRA. While doing Reset and reversal we are getting the above problem.
Please let me know if you need any information.

Hi Nagaraj,
You receive message F5 308 'Document includes already cleared items - reversal not possible'. This may be due to an error in the FM update.
Please Check OSS NOte:827577
https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=827577
Regards,
Viswa

Resetting and reversing a cleared document

Hello
I want to reset and reverse a customer clearing document. The clearing document which is 54203512 was posted and matched against the customer invoice in the previous period. When reversing and resetting the document in transaction code FBRA, a pop up screen u201CReversal Datau201D appears. The reversal reason is specified as 01 (Reversal for incorrect posting), posting date is todayu2019s date however the original clearing document 54203512 was posted in 05.09.2008 and in previous period. Click on continue.
The document is not reset and reversed and I am getting the error message u201CReversal reason 01 only permits posting date 05.09.2008u201D. Not sure why the document is looking at the posting date of original document even though I specified the reversal date as 08.10.2008. Can a document be reset and reversed in different periods?? Or does this cause any issues or problems? Or is this a bug??
Thanks in advance
Evelyn

Hi,
There are only 2 controls allowed for Reversal reasons:
1. Negative posting
2. Alternative date for posting
The symptom you have mentioned would be of a control from somewhere else, i.e. either a user exit or a validation. An order reason can only restrict it to current date or allow any other date. At least that is what I have experienced.
Cheers...

Resetting this reverse document is not possible - FBRA

Hi,
I'm trying to reset the cleared items with Tcode FBRA also system is throwing error like below
==================================================================================================
Resetting this reverse document is not possible
Message no. F5579
*Diagnosis
The system required a reverse document to be created after resetting a clearing procedure as otherwise documents would have been generated in the system which could not have been processed correctly. The following cases require the clearing document to be reversed:*
Exchange rate differences were posted.
=================================================================================================
the document has items of exchange rate differences, but,
Question: The exchange rate difference it's related with t-code fagl_fc_val ???l

Hi,
Reverse the document using FB08 and input the reversal document no in the reset transaction FBRA.
Hope it works.
~Andrew

Preview on [device name] option not available

Preview on [device name] option not available on Folio Overlays

In v20 its available in the Folio Builder panel (iPad only, I think). You have to plug to your Mac to the iPad with the USB cable and starting the Adobe Content Viewer app on the iPad first. Otherwise check iTunes on your Mac if your iPad is listed under "Devices".
Are you using InDesign CS5.5 or InDesign CS6?
You have to be up to date with the Overlay Creator panel to v20 as well. Check for that.
Recently I had no chance with InDesign CS5 and the v20 tools installed on a Mac with OSX 10.5.8.
Uwe

Reset and reverse

hi,
i have question on FBRA and FB08.
1) only reset - i know it is from cleared to open item. i need to use FB08 to reverse.
Q: if after reset i have 3 entries become open item, how to reverse these 3 entries via FB08?
2) reset and reverse - this is reset from cleared to open item and followed by reverse the open items.
Q : does it mean if i have 3 open items after reset, these 3 items entries will be reversed? means debit to credit and credit to debit?
thanks

Hi,
Please understand that using FB08,you are reversing the payment document,but not the open items.
Q: if after reset i have 3 entries become open item, how to reverse these 3 entries via FB08.
A:It is not required.You need to reset the payment document but not all the 3 invoices which u refer above.
If u still want to reverse these Invoices,use FB08 individually for each invoice.
Q:does it mean if i have 3 open items after reset, these 3 items entries will be reversed? means debit to credit and credit to debit?
A:Again I reiterate the point that you are reversing the payment document but not open items.
Hope you understand the same.
Thanks
Aravind

Reset and reverse for various vendor groups.

Hello,
We have two distinct vendor groups. For Group A there is no tax implications. For Group B withholding tax is mandatory.
When we are trying to run TCode FBRA for the Group A vendors, we find that it's giving me the option of 'Reset' and 'Reset & Reverse'.
Whereas when we are trying to run TCode FBRA for Group B, it is doing a 'reset and reverse' directly even without giving us an option. In other words, the screen which comes after we run FBRA, which gives us the three options to selct from, simply does ot show. Instead it generates a new reversal documents on its own for Group B.
We would like to check where this configuration is maintained. Can someone please advise.
Regards,
Suvarghya Dutta

Hello,
Some more information that I could gather. I found that the system now prompts the message: Payment was posted with withholding tax. Clearing document will be reversed. Do you want to continue. However this message appears ONLY when I am mentioning something under the Withholding Tax tab at the time of FB60.
If I don't mention anything under that tab then the system is prompting the two usual issues, ie. 'Only Resetting' and 'Reset & Reverse'. How come the FBRA screen is governed by the 'withholding tax' tab in FB60?
Regards,
Suvarghya

Regarding FBRA - Reset and Reverse.

Hi,
I am ABAPer and trying to prepare BDC for transaction FBRA. I want to use option 'Resetting and revers'. While recording when I go for save option in FBRA, it concludes the recording as I am pressing save button and goes for first default option 'Only Resetting'.
I would like to know, how I can go for 'Resetting and reverse' option through recording?...Is there any other option than 'save' I can use and continue recording with 'Resetting and reverse' then please let me know?
Thanks.

Solved..FB08 or F.80 can be alternative, Thanks.

I have the latest version of photoshop cc . Why is the focus select option not available ? (for selecting the in focus area)a)

I have the latest version of photoshop cc. Why is the focus selection option not available ?

Use CC 2014 menu Help>System Info... use its copy option and paste the info here. So we know your running CC 2014 not CC and that you have an enabled GPU....and latest device drivers.

Outboung Campaing: Error Unable to communicate with Enterprise Server. outbound Option not available

Hi everyone,
I'm running UCCX 8.01 + CUCM 7.1+ Cisco 7942 just for learning purpose. After creating the Outbound Campaign and imported the Contact List the call is received by the agent (call is state is received as Offering) but after press the Accept, Reject or any othe action button is received the error:
Error Unable to communicate with Enterprise Server. outbound Option not available (attached to post).
What does this mean?
Regards
Please rate all useful posts
Favor calificar todos las respuestas útiles.
LinkedIn Profile: do.linkedin.com/in/leosalcie
MDGDP, CCNA, CCNA Voice, CCNP Voice Certified

Any idea?
Please rate all useful posts
Favor calificar todos las respuestas útiles.
LinkedIn Profile: do.linkedin.com/in/leosalcie
MDGDP, CCNA, CCNA Voice, CCNP Voice Certified

Doc Reset and Reversal thruFBRA -Option not available-Directlyreversing doc

Similar Messages

Maybe you are looking for