Dock for iPhone with cover

Is there any dock för iPhone which can be used while a cover is on? In my case the cover is a incase sleeve.

There sure is.  Go to the following link for a dock extender:
http://www.amazon.com/CableJive-dockStubz-Converter-Through-Adapter/dp/B003TJR2H S/ref=sr_1_3?ie=UTF8&qid=1325721511&sr=8-3
You might also consider an extension cable:
http://www.amazon.com/RadTech-ProCable-Extender-19-Inch-iPhones/dp/B002V0SSC4/re f=sr_1_5?ie=UTF8&qid=1325721511&sr=8-5

Similar Messages

  • Is there a car charger and fm frequency transmitter for iPhone with IOS6?

    is there a car charger and fm frequency transmitter for iPhone with IOS6?

    Here is something interesting about car chargers and the iPhone 3G:
    From Macworld:
    On to the power adapters. Here’s the story: We learned a while back that iPhone 3G doesn’t support charging “via FireWire.” The thing is, there are lots of devices out there that don’t actually have a FireWire port, but are technically FireWire chargers because they’re sending power on the dock-connector pins that were used for power by the FireWire interface. There are a lot of reasons for this, chief among them the fact that the FireWire spec allows as much a 18 volts, while USB is a 5-volt connection. Since cars provide 12 volts of power, many if not most car-chargers used the FireWire method to send power.
    However, in the interests of space and simplicity (i.e., not having to engineer for two separate power paths), Apple has dropped support for FireWire charging with the iPhone 3G. This means that many accessories won’t charge an iPhone 3G. Borchers said that Apple gave accessory developers a strong hint that this was going to happen a while ago, but he said that some companies have continued to implement FireWire-based chargers despite the warning.
    But there’s some hope in sight: Borchers told me that at least a couple of third parties will be releasing converters that will pass through the dock connection, but convert the power to a USB standard. That adapter may make many of those charging devices come back to life

  • Male to male dock for iphone 4 to ipad 4

    HEllo is there's a male to male dock for iphone 4 to ipad 4?

    No, it would serve no purpose.

  • When will you have Docks for iPhone 5's in the UK Store's?

    When will you have Docks for iPhone 5's in the UK Store's?

    We are all iphone users just like you.
    You are not addressing Apple here at all.

  • Does the apple care  for iphone 3gs cover water damage?

    does the apple care + for iphone 3gs cover water damage?

    No.  Terms of the warranty call that "abuse".
    You can hope, and try:
    Turn it off, leave it off
    Put it in a pile of "dessicant packs" (shipping packs found in hard disk boxes), possibly in a plastic bag (NOT rice -- that has rice-dust which gets into the unit)
    Maybe try turning it on again in about 4-5 days
    But this is really a desperation move, and I would not do it myself (although others say they have tried it).
    Most likely you are paying for either a repair or a new unit.

  • Please share your experience with the universal dock for iphone 3g

    Hi There,
    1. Can people share their experience of the universal dock with the iphone 3g adapter. My concern is that does the tight fit scratch the black lower back of the iphone plastic everytime we remove it or put it in? OR is there enough gap for the iphone to slip in and out without scratching.
    2. Anyone having issues with the universal dock or does it work fine for most?
    thanks in advance,
    cheers,
    Sunil

    Thanks for your advice.
    I recently purchased a universal dock for my iphone 3g. It works great. I just had one question. When my iphone is sitting on it for lets say 20 - 30 minutes. Then if i press the buttons on the remote. nothing happens! If I then press the home button while it is on the cradle then, the remote, it plays music. There after lets say if I stop stop the music through the remote and again press the remote button after a few minutes it starts playing. So what happens after a long time. Why do i have to press the home button on the iphone for the remote to work. Is that how it is supposed to work???
    Thanks

  • Is it o.k. to use original iPhone dock for iPhone 4S?

    I've still had my original iPhone dock. I connected my new iPhone 4S to the original dock. It is working good to syncing on iTune with no problem I think...
    If this works, can I use this original dock with iPhone 4S?
    As I know, new iPhone 4S dock is compatible with only iPhone 4 and 4S. But I wonder this old and original iPhone dock is compatible with new iPhone 4S.
    Thanks in advance for advice!

    If the dock works, it should be ok to use with your iPhone 4S.  The pinouts of the connectors haven't changed and I've used an old iPod sync cable with my iPhone 4S with no problems.

  • Jabber for iphone with CUCM 8.5

    Hello,
    I did the config on the CUCM for my iphone so now jabber on my iphone is connected succesfuly to the CUCM and everythings works well except desk phone intergration, I followed the process below descripted on the Cisco site but cannot understand the step below (underlined)
    http://www.cisco.com/en/US/docs/voice_ip_comm/jabber/iPhone/8.6/JABI_BK_J29330BB_00_jabber-for-iphone-admin-guide_chapter_011.html#JABI_TK_E9D245B2_00
    Step 1
    Sign in to the Unified CM Administration portal.
    Step 2
    Navigate to the device page.
    •a. In the Device Information section, click Device Association and search for the desk phone you want to associate with the mobile device.
    (here my question is which device they are talking about? We have device profile for each user and we have mobility on our company and we can connect to any phone on our company with our profile, and in our CUCM I cannot find Device information or Device Association field??
    •b. Select the device you want to associate with the mobile device, and click Save Selected/Changes.
    •c. Navigate back to the End User page.
    •d. Ensure that the Allow Control of Device from CTI check box is checked.
    •e. Select the primary extension for the desk phone you want to associate with the mobile device.
    •f. In the Permissions Information section, add Standard CTI Enabled to the User Groups list.
    For 8900 and 9900 series phones, also add Standard CTI Allow Control of Phones supporting Connected Xfer and conf.
    •g. Note the user ID of this user for use later in this procedure.
    •h. Select Save.
    Step 3
    Navigate to the Device Information page for the desk phone you want to associate with the mobile device.
    •i. Verify that the value for Owner User ID is the correct end user.
    •j. Ensure that the Allow Control of Device from CTI check box is checked.
    If this option does not appear in the Device Information section of the Phone Configuration window, the phone does not support this feature.
    •k. Select Save.
    Step 4
    Navigate to the Cisco Dual Mode Device for iPhone page.
    •l. Verify that the value for Owner User ID is the correct end user.
    •m. In the Product Specific Layout Configuration section, for CTI Control Username, enter the user ID from the End User page.
    •n. Select Save.
    Step 5
    Navigate to the Directory Number Information page and verify:
    the Allow Control of Device from CTI check box is checked
    the Associated Devices box displays the desk phone and the mobile device
    Step 6
    Restart the mobile device and the desk phone.
    Thanks for your help
    Bel

    Hello,
    By 'Use Mobile Network' I am assuming that you want to transfer the VoIP call to GSM using the Mobility Softkey on the iPhone.  There are a couple of defects that you should be aware of when using this functionality:
    1) CSCtu15500 - Call drop after user handoff VoIP call to mobile using Anyconnect (VPN)
    2) CSCty91386 - Client can't handle send-to-mobile message
    Workarounds:  For the first defect, if you are using AnyConnect (VPN), please try transfer to mobile, with out using VPN.  The the second defect, you must use the US English as the User Locale.
    HTH,
    --Vincent

  • I can't get me Ipod on my Iphone4 to play, it will until an error comes up saying this device is not optimised for iphone, with nothing plugged into it.

    My Ipod on my Iphone wont play and I have no volume bar.  I can hear when the phone rings and I can hear people talking when they call, it seems to be a software promlem that I dont know how to fix. I have been having this problem and I have realized that when the error comes that this accessory is not optimised for iphone, my Ipod wont work.  I have never had the air play button and my software is the current editon.

    Try #2 and #3 in link below. If neither work, you most likely have a hardware issue.
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

  • Docking an iphone with a hard case

    Does anyone make an extension cable for docking an iphone without removing your hard case every night? Or an adapter of some sort to plug onto your dock, and allowing your iphone to dock onto the adapter while still keeping a hard case on the phone?
    Mike

    I got the Splash Alpha II, check it out.

  • Downside of developing for iphone with AIR?

       I've developed a few games with flash and have wanted to try my hand at some mobile apps. Most of my games are point and clicks and since I already know AS3, AIR  seems to be a pretty good option.
    I've asked about Android- which I plan on targeting first- and it appears a major downside is that many AIR apps woud require additional software on older phones and that the required software is a bit of a space hog.
    What are the downsides for developing for iphone? Does IOS require special software to play AIR apps? Do they run particularly slowly on the iphone?

    Whether Flash would be the best tool might depend a lot on whether you know Flash, what kind of game you're doing, and whether all of the features you need to do can be done. For example, if having Game Center and iAds is vital, then you wouldn't want to use Flash for the time being.
    Flash based apps on iOS do include the AIR runtime engine, but it isn't an external engine that gets installed once into the system, each app would have a copy of the engine. That's good, in that you don't have to worry whether someone installing a later app might cause your app to stop working. It does mean that each app is a few megabytes bigger download than the Android equivalent.
    On Android, the when a user downloads an AIR based app for the first time, they automatically get given the AIR runtime too. After that, any AIR apps that use the runtime that is already on the device only has to download the app itself, unless the app requires a later version of AIR, in which case the user is prompted to download the later version of AIR. It's not too painful a process.
    People have requested that the AIR runtime be part of the APK, and I think that will be done one day, but not in the near future.

  • Cradle for iPhone with protection?

    Purchased an iphone cradle to charge and sync my iphone, but it doesn't fit with the protective casing I have.
    Wondering if there are any cradles out there designed to fit iPhones with these cases. Can't seem to find one.
    Thanks!

    Since each case has different dimensions, that would depend on the specific case, don't you think? (Any reason why you're keeping the case model a secret?)
    Some cases like various SwitchEasy models come with an adapter to use in the Apple Universal Dock. Some cases have a removable lower section so that you can use the standard dock.
    Message was edited by: modular747

  • Export for iPhone with crop?

    I did searchs for iPhone AND crop and iPod AND crop, but nothing came up, so...
    Is it possible to use QT to export to iPhone with a custom crop? I'm starting with 1280x720 HD video from a Flip MinoHD. I would like to end up with something in a 3:2 ratio like 480x320 (either cropped to 1080x720 and then scaled or scaled then cropped to 3:2).
    I can do this crop if I export to MPEG-4 and it works great. This export option, however, comes out as mp4, instead of m4v and doesn't work on the iPhone.
    Any way to do this QT?
    How about QT Pro?
    Thanks!

    Do you have any idea if I'm doing something wrong? Here's an excerpt from my email to the author (I didn't mention cropping as to simplify my question/bug report)
    Since you did not describe your actual "crop" work flow for MPEG Stramclip I suspect that is where your problem lies. Basically you are going from a 1.78:1 to a 1.50:1 aspect ration. Therefore your will have to crop the left-right edges and not the top-bottom. Since you indicate want to end up with a 480x320 viewing area, try the following:
    1) Select either of the iPhone presets. Since you will have to customize the dimensions, as well as, crop the file, it doesn't matter which preset you choose.
    2) Back in the main MPEG-4 export window, re-set the "Other" dimensions to 569x320. What you are in effect doing is setting the target height of the output you want and adjusting the width to the nearest pixel for a 16:9 aspect ratio to match your source file and, thus, minimize any distortion.
    3) Set output audio and/or video rates as desired (I normally use 1000 or 1200 Kbps for video and 128 Kbps @ 44.1 KHz for audio) and make any adjustments to brightness, contrast, saturation, volumes, etc. if desired.
    4) Now activate the "Cropping" tool by "ticking" the correct box and leave the option in the "Destination" mode.
    5) Now enter your left-right crop settings. These setting must total 89 pixels to be subtracted from the 569 scaled pixel width which will leave you with your specified 480x320 viewing area. How much you decide to crop from the left and right sides is up to you but must total 89 pixels. Thus you can keep the center area or chose to offset the viewing area as best suits your needs.
    6) Now preview the content to be sure it is exactly what you want and if/when satisfied, select the "Make MP4" button to set up and begin your export.

  • Can I use the ipad keyboard Dock for pairing with a non Apple laptop?

    I am thinking of getting the keyboard dock for my IPad 2.
    I also have an IBM laptop with blutooth. Can I use the iPad dock as a keyboard for the IBM?
    Thanks

    Tremolo Arm wrote:
    I am thinking of getting the keyboard dock for my IPad 2.
    I also have an IBM laptop with blutooth. Can I use the iPad dock as a keyboard for the IBM?
    Thanks
    If you're referring to this dock:
    http://store.apple.com/us/product/MC533LL/B?fnode=MTc0MjU4NjE&mco=MTg1ODE1Mjc
    it is not a Bluetooth keyboard so can't be used with the laptop.  And the keyboard dock was originally designed for the curved back of the iPad1.  So while it does appear to work with the iPad2, some people report that it's a little loose and sometimes get intermittent disconnections with the connector.
    As for Bluetooth keyboards, some can only be paired to one device.  To use with two computers, you may have to un-pair from the first device, the re-pair to the second device.  Some keyboards can "switch" without un-pairing, but you have to research to ensure the model you want will do that.  Depending on your usage, it may be more worthwhile to get separate keyboards.

  • Belt pouch which is a snug fit for iPhone with the bumper on?

    I'm looking for a belt pouch which is exactly the right size for an iPhone with the Apple bumper on. A snug fit would be preferable because it works better when silent mode is on.
    Probably a better question is - is there another phone which is the same size as an iPhone with the bumper on? Then I can look at cases designed for that phone.
    Thanks for suggestions.
    Message was edited by: jthg

    I don't know if this is the type you're looking for, but an iPhone 4 with a bumper should fit well in a MOBO horizontal slim case.
    http://www.amazon.com/Mobo-Slim-Horizontal-Carrying-Case/dp/B003RD6466/ref=cmcr_pr_producttop
    BTW, I bought mine at an AT&T store, but Amazon has them for a lot cheaper. I had a soft plastic case with a back and it fit snugly in the MOBO. I am now using the free acrylic case with a back, because it is easier to out of the MOBO (smoother action).

Maybe you are looking for