Dock Logo 'Fuzzy' Since 9.1 Upgrade

Rather peculiar - annoying but not disastrous -issue since I upgraded to iTunes 9.1 ... it would appear that the dock logo for iTunes has become fuzzy since the upgrade.
Anyone else seen this? Anyone have a solution?
Illustrative image here: http://i41.tinypic.com/27wyh07.png
Message was edited by: iKerr - illustrative image added

Thanks for the response. I have tried that. No dice I'm afraid.
It looks like the image that is set as the icon for the iTunes application is the problem (see here: http://i39.tinypic.com/szx15w.png).
As I said, it's not disastrous so I don't think it's worth deleting iTunes and reinstalling it. Just a bit annoying and it would be good to sort it out.
Maybe I just need to get my hands on an iTunes logo that I can use to replace the 'fuzzy' one I have. Anyone willing to copy their one and upload it somewhere for me?

Similar Messages

Can't open WMV files in Quicktime since Snow Lep upgrade.....

I Can't open WMV files in Quicktime since Snow Leopard upgrade
I get an error message saying 'Quicktime player must be installed to run this application'
This is happening on both of my macs
Any help appreciated

I had this problem. Double clicking the WMV file produced the message you had. However, if I open by dragging the WMV file onto the QuickTime X icon in the dock it did indeed open.
I then looked at the WMV's Get Info window and found that it was set to open in WMV Player by default. Obviously I do not have WMV Player installed. The drop down menu on this setting did have QT Player as the other option. When I changed the option to QT Player as default the "Change All" button became active. Previously it had been greyed out. Things have been OK since, but I have not tried it on any new WMV files.

I cannot access Facebook on my iPad since the last upgrade

I cannot access Facebook on my iPad since the last upgrade - I have turned the iPad off, recharged it and still brings up an old page every time.

Private Browsing can be found in the lower left hand side in Safari. It just says "Private". I'm not sure what to tell you about the mail issue. You might
Try a Restart.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
Resetting your settings
You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple.
Here is a link to their contacts with most of the information below.
http://www.apple.com/contact/

Numbers problems on iPad mini since iOS 7 upgrade.

Ever since the iOS upgrade my Numbers app has become unstable. When I input data on a form this is sometimes not visible even though it does appear on the sheet. Also some formats are randomly changed. I've had the occasional crash as well. Any advice please.

Delete the app and reinstall it is one option. IF ....you are using iCloud with Numbers, you should be able to delete the app, and reinstall it without losing of your files. I use iCloud with Pages and have deleted Pages from my iPad several times for troubleshooting purposes and I never lost anything.
Another less scary thing to try is to close the app completely and reboot the iPad.
Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the numbers app and then swipe "up" on the Numbers thumbnail to close it.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
To follow up on James's point about iWorks apps being updated, I did in fact see that banner announcement this morning when I logged onto iCloud.com on my Mac. The iWorks apps are in the process of being updated.

Can't save pictures on original folder position after edit...since I'm upgraded to IOS7 on IPad2.

can't save pictures on original folder position after edit, get save popup to save at different position, also still on toubles to get them back to original folder positon since I'm upgraded to IOS7 on IPad2.

I say the problem is probably noted, and probably will be resolved. Not that i can speak for Apple. I find the "problems" of wallpaper to be pretty minor compared to the advantages of iOS 7. The fun of wallpaper has always been pretty insignificant here.

Wifi problems ipad 3rd and Time capsule 4th generation since iOS 8 upgrade

Does anyone have the same issue?... I have wifi problems betwen ipad 3rd generation and Time capsule 4th generation since iOS 8 upgrade. Solution: I must switch on/off airplane mode in order to start using Wifi...
I have the latest updates for all equipment and I don't have similar problems with my iphone, macbook or mini-ipad.

It works ... removing and reestablish the wifi connection works. Thanks ...

Since the software upgrade connecting to hotspot from my iphone with my ipad is not working.

Since the software upgrade , I cannot connect my ipad2 to my iphone 4s via the phones hotspot. Regular wifi is ok. Is anyone else having this problem? I tried resetting the network settings on the ipad, but it didn't help. The ipad sees the hotspot, but doesn't connect. My phone service is with Verizon.

I think I solved the problem. I did a network reset on both the ipad and iphone. So far so good.

My preview crashes every time I try to open it since the Maverick upgrade. Any thoughts?

My preview crashes every time I try to open it since the Maverick upgrade. Any thoughts?

The problem is with facebook, go to settings / facebook / your user name and delete your account, the do a hard reset (home+power for some seconds).
dont need to delete the facebook app! just delete your integrate account from settings
cheers!

Why is it no longer possible, since the iPhotos upgrade to 9, to select a number of photos and "hold on to them" when changing to a different left-margin "view"?

There has been a downgrade since iPhotos was… upgraded.
Before iPhotos was upgraded to 9, It USED to be that
IF you chose a photo or a number of photos WITHIN an event
(ensuring that they were engulfed in yellow or blue),
and THEN went to the left margin and clicked on Photos
in order to view the ENTIRE library's photos
(not just those in that particular event),
the selfsame photos would REMAIN chosen in the LARGER context.
That is no longer the case.
And that was very useful, because
if you wanted to move a batch of photos within one event
to within another event, that was the easiest way to do so
— whereas now, we have to search for and "find" them all over again.
When I go "back" to Photos, I not only lose the selected images,
say from March 2009, I end up at a totally different place,
say in October 2006, and I have to do lots more "work" finding
the photos again then used to be the case.

Flag the Photos.
Switch to Events View
Select the Target Event
Events menu -> Add Flagged Photos to Selected Event
Regards
TD

Since I have upgraded from 7.1 then the power consumption increased slightly unbelievable. I have new batteries in my iphone 5 and when I had at ios 7 so was consumption that allows the battery envelope in two days and with ios 7.1 so is it only 12 hours

Since I have upgraded from 7.1 then the power consumption increased slightly unbelievable. I have new batteries in my iphone 5 and when I had at ios 7 so was consumption that allows the battery envelope in two days and with ios 7.1 so is it only 12 hours before I need to recharge the battery.

Wrote a little wrong the first time!
Then I upgraded to 7.1 so have power consumption increased slightly unbelievable. I have new batteries in my iphone 5 and when I had at ios 7 so was consumption that allows the battery envelope in two days and with ios 7.1 so is it only 12 hours before I need to recharge the battery.

Iphoto on ipad no longer sees my photostream since IOS 7 upgrade

iPhoto on my ipad no longer sees my photostream in the albums page of the iPhoto app since IOS 7 upgrade??
I can see my photostream and shared photostreams in the ordinary Apple photo app on the iPad. Prior to IOS 7, all these photostreams were visible in the iPhoto app's albums page. What has changed? Its' most annoying as I was relying on my photostream in the iPhoto app as my source of photos for my journals.
Any suggestions please???

I've just had a long chat with Applecare in Colorado. Very helpful they were.
I can confirm that the "new" IOS 7 version of iPhoto app on all IOS devises does not support your my photostream nor any of your pre IOS 7 upgrade shared photostreams.
Any new post IOS 7 upgrade shared photostreams will be visible in the iphoto app. I have tested it and it works fine. But all your pre IOS 7 shared photostreams and existing my photostream remain invisible to post IOS 7 iPhoto app.
This "improvement" to iPhoto on IOS devises is now a lame duck. Why ! I'm now on the lookout for a better photo journalling app for my iPad.

I've recently noticed that since the last upgrade any links to pdf files on websited no longer work. All I get is a blank white page or a blank black page when I click on these links. Can I fix this?

I've recently noticed that since the last upgrade any links to pdf files on websited no longer work. All I get is a blank white page or a blank black page when I click on these links. Can I fix this?

YAY!! I have Safe mode!!
um, now what?

Drive no longer recognizes blank DVD's since I've upgraded to Snow Leopard

Hello, I have an issue with my Super Drive (the UJ-875). Since I've upgraded to Snow Leopard, the drive no longer recognizes any blank media in it. I've tried -R, +R, -RW and +RW. No dice. The discs can be put in the drive and ejected without issue, it's just they are never displayed in Finder or Disk Utility. When I try to burn a mounted disc image, it simply sits there saying "To begin, insert a blank disc". I've tried using the exact same spindle of blank TDK -R's that I was using before I upgraded the O.S. I also tried some blank Sony media and it doesn't recognize it. It should be noted that the drive doesn't seem to have any issue with previously recorded discs. Those appear to read just fine, it's only blank media that looks like the issue. Any answers you can provide would be greatly appreciated. Below is the Disc Burning information that's displayed in About This Mac:
MATSHITA DVD-R UJ-875:
Firmware Revision: DB09
Interconnect: ATAPI
Burn Support: Yes (Apple Shipping Drive)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -R DL, -RW, +R, +R DL, +RW
Write Strategies: CD-TAO, CD-SAO, DVD-DAO
Media:
Type: DVD-R
ID: RITEKF1
Blank: Yes
Erasable: No
Overwritable: Yes
Appendable: Yes
Write Speeds: 2x, 4x, 8x

Try repairing permissions: http://support.apple.com/kb/HT1452 -and resetting the Pram: http://docs.info.apple.com/article.html?artnum=2238

My iPad is no longer communicating with my wireless printer since last two upgrades!

My iPad is no longer communicating with my wireless printer since last two upgrades!

1. Turn the router, iPad and printer off
2. Turn on the router and then wait 30 seconds
3. Turn on printer and then wait 30 seconds
4. Turn on your iPad and test print.

Ever since the systyem upgraded me to 3.6.6. I can not even run one eight hour day without firefoc either crashing or locking up which requires me use C/A/Deleate to close the program. I used to be able to run 8 to 12 windows at a time and NEVER lock up

Ever since the systyem upgraded me to 3.6.6. I can not even run one eight hour day without firefoc either crashing or locking up which requires me use C/A/Deleate to close the program. I used to be able to run 8 to 12 windows at a time and NEVER lock up or crash with the older version. Is this problem being looked into and or being corrected. I use Firefox with Google and my system is XP Pro 32 bit. THIS IS REALLY making me MAD. My email is [email protected] and would appreciate a response to this ASAP. I have tried a couple of items from your help section and nothing works.

'''Anonymous'''
Please post a separate question. Thank you. https://support.mozilla.com/tiki-ask_a_question.php?locale=en-US&forumId=1
'''chris'''
'''''Crashing'''''
See:
http://support.mozilla.com/en-US/kb/Firefox+crashes
http://kb.mozillazine.org/Firefox_crashes
http://support.mozilla.com/en-US/kb/Firefox+crashes+when+loading+certain+pages
http://support.mozilla.com/en-US/kb/Firefox+crashes+when+you+open+it
http://support.mozilla.com/en-US/kb/Firefox+will+not+start
http://kb.mozillazine.org/Browser_will_not_start_up
'''''Hanging'''''
See: http://support.mozilla.com/en-US/kb/Firefox+hangs
'''''Hanging at exit'''''
'''Kill Application'''
In Task Manager, does firefox.exe show in the '''Processes''' tab?
See: [http://kb.mozillazine.org/Kill_application Kill Application]
'''Causes and solutions for Firefox hanging at exit:'''
[[Firefox hangs]]
[http://kb.mozillazine.org/Firefox_hangs#Hang_at_exit Firefox hangs at exit]
[[Firefox is already running but is not responding]]
'''''Safe Mode'''''
You may need to use '''[[Safe Mode]]''' (click on "Safe Mode" and read) to localize the problem. Firefox Safe Mode is a diagnostic mode that disables Extensions and some other features of Firefox. If you are using a theme, switch to the DEFAULT theme: Tools > Add-ons > Themes '''before''' starting Safe Mode. When entering Safe Mode, do not check any items on the entry window, just click "Continue in Safe Mode". Test to see if the problem you are experiencing is corrected.
See:
'''[[Troubleshooting extensions and themes]]'''
'''[[Troubleshooting plugins]]'''
'''[[Basic Troubleshooting]]'''
If the problem does not occur in Safe-mode then disable all of your Extensions and Plug-ins and then try to find which is causing it by enabling '''one at a time''' until the problem reappears. '''You MUST close and restart Firefox after EACH change''' via File > Restart Firefox (on Mac: Firefox > Quit). You can use "Disable all add-ons" on the Safe mode start window.
'''chris'''
'''''Other Issues''''': ~~red:You have installed plug-ins with known security issues. You should update them immediately.~~
'''Update Java''': your ver. 1.6.0.~~red:17~~; current ver. 1.6.0.20 (important security update 04-15-2010)
(Firefox 3.6 and above requires Java 1.6.0.10 or higher; see: http://support.mozilla.com/en-US/kb/Java-related+issues#Java_does_not_work_in_Firefox_3_6 )
''(Windows users: Do the manual update; very easy.)''
~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
See: '''[http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates Updating Java]'''
Do the update with Firefox closed.
'''NOTE:''' Java version 1.6.0.21 has been released. It is mainly an update for developers of Java applications and most users do not need to be concerned about downloading version 1.6.0.21. '''''At this time''''', the update option in existing installations of Java 1.6.0.20 are not updating to version 1.6.0.21; '''''at this time''''', it must be manually downloaded and installed. According to the Java release notes:
''"'''Bug Fixes'''''
''Java SE 6 Update 21 does not contain any additional fixes for security vulnerabilities to its previous release, Java SE 6 Update 20. Users who have Java SE 6 Update 20 have the latest security fixes and do not need to upgrade to this release to be current on security fixes."'' Source: http://java.sun.com/javase/6/webnotes/6u21.html
'''Install/Update Adobe Flash Player for Firefox (aka Shockwave Flash)''': your ver. 10.0 r~~red:45~~; current ver. 10.1 r53 ('''important security update 2010-06-10'''; see: http://www.adobe.com/support/security/bulletins/apsb10-14.html)
~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
See: '''[http://support.mozilla.com/en-US/kb/Managing+the+Flash+plugin#Updating_Flash Updating Flash]'''
-'''use Firefox to download''' and '''SAVE to your hard drive''' (save to Desktop for easy access)
-exit Firefox (File > Exit)
-''In Windows,'' check to see that Firefox is completely closed (''Ctrl+Alt+Del, choose Task Manager, click Processes tab, if "firefox.exe" is on the list, right-click "firefox.exe" and choose End process, close the Task Manager window'')
-''In Windows,'' double-click on the Adobe Flash installer you just downloaded to install/update Adobe Flash
-when the Flash installation is complete, start Firefox, and test the Flash installation here: http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_15507&sliceId=1
*'''NOTE: On Vista and Windows 7''' you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). See this: http://vistasupport.mvps.org/run_as_administrator.htm
*'''NOTE for IE:''' Firefox and most other browsers use a Plugin. IE uses an ActiveX version of Flash. To install/update the IE ActiveX Adobe Flash Player, same instructions as above, except use IE to download the ActiveX Flash installer. See: [[ActiveX]]
*Also see: http://kb.mozillazine.org/Flash ~~red:'''''AND'''''~~ [[How do I edit options to add Adobe to the list of allowed sites]]
'''Update Shockwave for Director (aka Shockwave Player)''': your ver. ~~red:10.1 (very old)~~; current ver. 11.5.7.609 (important security update released 2010-05-11; see http://www.adobe.com/support/security/bulletins/apsb10-12.html)
NOTE: this is not the same as Shockwave Flash; this installs the Shockwave Player.
~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
SAVE the installer to your hard drive (Desktop is a good place so you can find it). When the download is complete, exit Firefox (File > Exit), locate and double-click in the installer you just downloaded, let the install complete.
See: '''[http://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox#_Installing_Shockwave Installing Shockwave]'''
'''You '''~~red:'''MAY'''~~''' need to Update Adobe Reader for Firefox (aka Adobe PDF Plug-In For Firefox)''': your ver. N/A; current ver. 9.3.3 (important security update release 06-29-2010; see: http://www.adobe.com/support/security/bulletins/apsb10-15.html)
~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
See: http://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox#Installing_and_updating_Adobe_Reader
''You may be able to update from the Adobe Reader installed on your system'' instead of going to the Adobe site and downloading. Open the Adobe Reader installed on your system (''in Windows, Start > Program Files, find and click Adobe Reader to open''), click Help, click Check for Updates.
''If you go to the Adobe site to download the current Adobe Reader:''
-'''use Firefox to download''' and '''SAVE to your hard drive''' (save to Desktop for easy access)
~~red:-See the images at the bottom left of this post to see the steps to take on the Adobe site~~
-exit Firefox (File > Exit)
-In Windows: check to see that Firefox is completely closed (''Ctrl+Alt+Del, choose Task Manager, click Processes tab, if "firefox.exe" is on the list, right-click "firefox.exe" and choose End process, close the Task Manager window'')
-In Windows: double-click on the Adobe Reader installer you just downloaded to install/update Adobe Reader
*'''NOTE: On Vista and Windows 7''' you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). See this: http://vistasupport.mvps.org/run_as_administrator.htm
*'''NOTE for IE:''' Firefox and most other browsers use a Plugin. IE uses an ActiveX version. To install/update the IE ActiveX version, same instructions as above, except use IE to download the ActiveX installer. See: [[ActiveX]]
*Also see: http://kb.mozillazine.org/Adobe_Reader ~~red:'''''AND'''''~~ [[How do I edit options to add Adobe to the list of allowed sites]]

Dock Logo 'Fuzzy' Since 9.1 Upgrade

Similar Messages

Maybe you are looking for