Dock & Multi Display Support

So I installed Mavericks on my early MBP2011 all went fine and everything seems to work except the dock with plugged into an external monitor, I have my dock on auto hide and so far it seems that when using an external monitor the dock doesnt react the same as if I was on my laptop display, any comments and suggestions are welcomed.  Do you have the same issue??

DVI to VGA works fine on this card.
Note that I'm having problems getting dual headed TFT's working (LG).
If you're on CRT's you'r OK. TFT's - a Samsung works fine on DVI port, my LG's aren't detected on the DVI port during boot.
good luck.

Similar Messages

  • OS X Maverick Multi Display Support for grouping multiple monitors into one display?

    Will the new Mac Pro be capable of grouping multiple monitors into one large display?  Similar to AMD Eyefinity for the purpose of gaming.

    The current Mac Pro, or any Mac released since 1987 that can support multiple displays can ALREADY support combining all attached displays into one Extended Desktop, onto which you can open the gaming window and game across multiple displays. It is built into the System Software.

  • FX5200 multi display support?

    I am currently researching the MSI FX5200-TD128 VGA card to use with the MSI 865PE Neo2-FIS2R mobo. The specs on the FX5200 and the Nvidia chipset specs say that this card will support dual monitors. Has anyone used this setup with this card? The card has one(1)VGA output and one(1)DVI output, can a DVI to VGA adapter be used safely on this card? Some other brands don't recomend useing adapters while others do.
    Any info would be greatly appreciated.

    DVI to VGA works fine on this card.
    Note that I'm having problems getting dual headed TFT's working (LG).
    If you're on CRT's you'r OK. TFT's - a Samsung works fine on DVI port, my LG's aren't detected on the DVI port during boot.
    good luck.

  • Multi Display on K230

    Has anyone got ANY vidio card to be reconized on the K230 for multi display?  I have tried two cards, both were not reconized by the bios but actually did work on Vista at VGA default.
    No one in the support staff have a clue on making this work.  There must be one card the bios will see and work.  Why put the expansion bus in if you can not use them......?

    I used the Nvidia 8400GS PCI.  Bios did not see it, Windows device manager did not see it, however the computer was using the card as a VGA default (Intel onboard card was disabled in the bios).
    I don't remember the other card, sent it back.
    I have ordered the Nvidia 8600 to see if that will work, seen in a post that it did.  
    Also see post:  K230 64 bit with Vista Ultimate, this is a post I did awhile back without any success.
    Message Edited by topmmc on 08-06-2009 10:13 AM
    Message Edited by topmmc on 08-06-2009 10:13 AM

  • Multi-Lang support and slides issue

    First, is anyone here using slides-based Flash documents at
    all? Whenever I post my (IMHO well-researched) questions/reports,
    like the one linked to below, I never get an answer. By now I'm
    ready to give up completely on slide-based documents and ready to
    convert it all to "flat" Flash docs, but I'm just curious why the
    numerous horrible bugs in slides get no response, did everyone else
    but me know not to use them???
    (older problem, actually more a report because there is no
    solution, it's clearly a bug IMHO:
    http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=15&catid=288&threadid =1255720&enterthread=y)
    Anyway, I found a new issue, which, like last time, I first
    successfully and easily recreated using a fresh (slide-based)
    document to make sure my AS code isn't interferring.
    Doing the same experiment with bot a "normal" Flash document
    and with a slide-based one, I created a dynamic text field and
    followed (Macromedia/Adobe) instructions to setup multi-language
    support (en,de) for the text field, using the Strings dialogue.
    It all worked as it should in the regular Flash doc, but
    nothing worked in the slide-based one. Right now I'm trying to see
    if I can still get it to work using the Locale class and AS code,
    but that doesn't seem to work either.
    Again, by now I've pretty much decided to abandon slide-based
    layout because of the bugs and the non-existing feedback, I'm only
    curious if I was the only one who ever even tried slides...(?)

    this should work. One thing to keep in mind is that Swing components have fonts set on them, so if the font you are using doesn't contain the characters, then you get garbage sometimes (I see this with japanese characters when they pump into an app I'm currently writing, even though I know I got the right character codes out of the email).
    Try base64 encoding the content before it is sent and save it (the base64) to a text file (Don't send the base64 text, send the actual content). Then base64 encode the content when it is recieved and compare it to the stored file (without the whole displaying thing). If they match, your issue isn't javamail, it is probably swing, or you aren't setting the character encodings correctly. If they don't match, javamail.
    Just taking bets I would say the two will match and your issue is simply the swing font thing.

  • Multi Language Support on UI

    Hi Folks,
    I want to store the multiple language descriptions in to Database and then want to display that specific language description (like Japanese or Arabic) on UI using JSPs.
    Since I am new to this concept I dont know any thing reg this.
    Can any one of u tell me clearly what are the steps to follow to build a multi language supporting application.
    Thnx in advance...
    Javardhan::)

    use resourcebundle concepts.if u are using struts frame work make ApplicationResource.properties files and use them

  • Photoshop Element 7 Multi Processor Support?

    Will we have multiprocessor support across the entire feature set of PSE 7? I haven't seen that as part of the feature set of the new product. Today, we experience diminished functionality by having to turn off multi-processor support in order to get thumbnails to work. Just curious if that might have been included in the new product.

    Paul posted his query before PSE 7 was released, but for future reference of people searching these forums:
    PSE 7 fixes the notorious bug in PSE 6 in which thumbnails for raw photos were not correctly displayed on computers with multiple processors (e.g. hyperthreaded Pentiums or dual- or quad-core Duos).

  • Multi-language support for user-specified text strings used in the forms

    multi-language support for user-specified text strings used in the forms
    Instead of creating multiple forms, 1 in each different language, for the same service, is there any workaround?

    Hoan - is your question what are the considerations when creating multiligual catalogs? If so, I can tell you that at other clients I have seen them use a single catalog for one or two languages. For the two langugages, such as Spanish/English, you can create a single catalog with both of them. Once you get to more than two languages, the catalog would get unweildy and is therefore not suggested.

  • Columns Display Support in Oracle 10g Express Edition..................

    I am working with the Oracle 10g Express Edition, and I Created a Table with 52 Fields and even successfully inserted data into the table via Java Program. But the problem is when I am displaying the table from the Oracle 10g Express Edition Interface, it is displaying only first 31 Fields and displaying "<div class="fielddata">First 31 columns displayed.</div>". What should i do if I want to display all the 52 columns. Awaiting for the Reply. Thank You..

    duplicate post
    Columns Display Support in Oracle 10g Express Edition..................

  • Can 23" cinema HD Display support Game systems connectivity

    I currently have my display connected to my MacBook but space is a factor at my dorm. Can I use my Apple 23" Cinema HD Display to connect my xbox 360? I bought a DVI to HDMI adapter but i get no picture. i also have a xbox VGA cable if i need to go that route. I figure digital to digital should give me a better picture, the an analog to digital. Can my 23" Cinema HD Display support game system connectivity or these older display were meant for Mac's Only?

    followup question... Does the 23" cinema HD Display support HDCP? Could that be the cause for a blank screen. the power light is solid. I when to Display settings and lower resolution on the monitor, still no picture?

  • Win 8.1. Core language and multi-language support.

    HI,
    I've used a US developed program with multi-language support for years in Win XT and Win 7. As the program now supports win 8.1. I've upgraded to 8.1. and the new release of the program. However it will not work properly and the reason given is
    that my version of 8.1. has a different core language compared with what  the program uses and this version is not multi-language supported. Now I wonder if there are various versions of  the core language in 8.1. or is the core
    language unique, supported by various language packets for menu's, guiding texts, etc.  Why do I then need a multi-language supported program? Where can I put this question?
    Regards
    Sverre

    I'd probably try them here.
    https://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=fsharpgeneral%2Cvcgeneral%2Cvbgeneral%2Ccsharpgeneral%2Cwindowsgeneraldevelopmentissues&filter=alltypes&sort=lastpostdesc
    Regards, Dave Patrick ....
    Microsoft Certified Professional
    Microsoft MVP [Windows]
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

  • Displaying/Supporting Langua

    So I'm having a bit of a problem..
    When my Zen MicroPhoto is set to the standard English language, the Korean song titles, artists, etc are displayed as just boxes. I'm guessing this means that it translated the Korean text to English text. But when I set the main language on the player to Korean, the options switch to Korean text, but I still see boxes for titles, artists, etc. It basically won't translate any Korean that's not imprinted on the player I think. Is this suppose to happen I thought by "supporting" a language, it means it can both read & display.
    Any help/suggestions appreciated :]

    Hi,
    To show supporting detail for the Planning Details database connection:
    1 Open a report and select a row in the grid that contains a member with supporting detail.
    2 In the Row Properties sheet, select Display Supporting Details.
    3 Specify whether to allow page breaks with the rows of supporting detail:
    a) To allow a page break within the rows of supporting detail, select the Allow Page Break Within check box.
    b) To keep the parent member and the supporting detail on the same page, deselect the Allow Page Break Within check box. If the supporting detail does not the currentpage, the parent member and supporting detail is moved to the next page.
    Note: If the supporting detail spans multiple pages, this option defaults to Allow Page Break Within and page breaks are used.
    4 Optional: To position the supporting detail before or after the parent member, select the Grid
    Properties sheet, select the Position category and select an option in the Position of Supporting Detail
    box:
    a) To display supporting detail before the parent member, click Before Members.
    b) To display supporting detail after the parent member, click After Members. This is the default.
    Regards,
    Vinit

  • Cinema Display Support Part.

    The support for my 15" cinema display bit the dust about three weeks ago. I've tried to fix it on my own but no amount of super glue will hold up the weight of the monitor. I am looking for a replacement of the failed support. Does anyone have an extra support, or a broken monitor with the cinema display support in tact?
    -pb

    Apple part number 922-5633
    a search yielded this vendor, ready to sell for US$36 + shipping:
    http://macpalace.com/scripts/prodList.asp?idcategory=124&curPage=2&sortField=sku

  • Xcode Multi Display Program

    Hey guys,
    So I'm trying to create a program in xcode that allows you to display dynamic content on an external display in a full screen window, and on the primary screen, have a window that has controls for the content.  Here is my question:
    How do I get the display window to 1. Start on the external display, and 2. Get it to go full screen?  I know how to enable full screen on the windows, but when I have the window on the external screen and click full screen, it slides over to the primary display and goes fullscreen.
    Once I get this enabled its smooth sailing from here.
    Thanks in advance for your help!
    Mark

    Thanks! Unchecking of that checkbox — Displays Have Separate Spaces in Mission Control pref — helps! It’s so unintuitive to go there.
    Some apps still misbehave but minor. Call Recorder, for example, (an add-on to Skype) is now flung way over to the opposite end of the other display. Weird.
    But the bigger problems remain:
    1. Brightness is still manual. Automatically Adjust Brightness controls only one (primary) display? No effect on a 2010 LED 24-inch Apple display?!
    2. Excel windows still float off beyond the screen. Is MS Excel for Mac 2011 considered incompatible with Mavericks? Every functionality in Excel works fine, except that windows saved in a position outside the display area, like older documents, remain fixed outside the display area! So if the title bar is not visible, there’s no way to grab it and move it! I have to temporarily re-ARRANGE the displays again and again! Then do a save-as or duplicate the document. Uggghh.
    Finder windows still don’t keep their views but probably not a multi display issue.

  • Multi-display windows under Mavericks

    Under 10.6.8, it has been my habit (and pleasure) to open very wide terminal windows across as many as three displays in order to see the results of somewhat wide database queries without text wrapping, which affects readability and cuts the number of lines visible on the display window at once.
    Under 10.9.3, when I adjust a window over towards another display so that the window would be on both displays, the window is "ghosted" until I let go of the drag bar, and if the move has not fully adjusted the window to land entirely on the display it is moving into, that half of the window promptly disappears.
    Am I missing something about window positioning under Mavericks? Or, is there any way to regain the previous, multi-display-friendly window handling in Mavericks?

    Am I missing something about window positioning under Mavericks? Or, is there any way to regain the previous, multi-display-friendly window handling in Mavericks?
    You have been IOS-ed (blindsided by features ported from IOS, the land of tiny screens and one-at-a-time processing) Turn this off to go back to the "Un-Natural" way of doing things:
    OS X: Using multiple displays in Mavericks

Maybe you are looking for