Dock question and earbud covers

Well. received my 4GB nano today and good God it's beeeyootiful!!! The packaging is something that belongs in your book library and the nano itself is far from flimsy. 2 questions however:
The connector has these buttons on either side which you must squeeze to disconnect it from the Nano. Having arthritic hands this is just about impossible so I wanted to ask those of you that possess a previous-iPod dock (yes i know the Nano dock is not out yet): does removing the iPod from the dock require any manipulation other than pulling it straight out?
Are the little black earbud covers a necessity or can I do without them?
Thanks in advance,
Frank

Your arthritic hands will be glad to hear that the docks are a slip fit.
Just drop the nano in, and slip it out. No awkward buttons to mess with! Plus if you have powered speakers, the docks have a lineout to run your music out of your nano and to the speakers (running music out of the nanoheadphones is noisy)
The black foam is there to keep earwax off the earbuds and to snug up the fit in some people's ears. If the naked buds feel good, pitch the foam. Sometimes the foam slips off the buds when you pull the buds out of your pocket; if you become foam dependent, you'll become a basket case worrying where your foam went!
I agree with you on the packaging, I just got mine yesterday in the mail (first iPod I have had engraved) and was impressed with how small the packaging was. It's going to be a shame to throw out the packaging, but I already have too much clutter!

Similar Messages

4 questions: at login black rectangular box, appears and speaks- 2 annoying black box over text- 3 bluetooth doesnt always pick up keyboard/mouse at login- 4 dock disappears and reappears at will

Here we go,
1) at login a black rectangular box with white text appears and voice over seems to be on (even though its switched off)
2) after login an annoying black square surrounds the cursor
3) upon waking computer from sleep the bluetooth doesn't pair with the keyboard or mouse (I usually just power them both off and then back on and this seems to work)
4) the dock disappears and reappears on its own even though "hide the dock" is not checked
iMac running Lion
Thanks for any help!
Dennis

In the login screen, press the key combination command-F5 to deactivate VoiceOver.

My ifone4s is no longer producing sound..i am running iOS 6.1.3...i have tried reset,restart,restore----no avail....u have cleaned the dock port and speaker and mike----no avail...this is a replacement product from apple (march 2013) HELP apple!!

Hi there!!...my ifone4s is no longer producing sound of any description with the exception of the earphone jack!!! I am running iOS 6.1.3....i have tried reset,restart and restore----no joy....i have cleaned the dock port and speaker and mike area ----no joy! Now my question,,,is this a hardware malfunction or a bug from the iOS???..this is a replacement fone (march 2013) my previous fone suffered a wifi antennae breakdown after an iOS update!!,,,covered under warranty...this fone is now given trouble,,is this fone covered under warranty surely li should get more than three months outta my new fone - no???...any advice or help from anyone will be greatly appreciated especially as regards warranty...thanks in advance for looking...

If you use eabuds or headphones on occasion, try inserting and removing the earbuds/headphones several times in a row.
An exchange under warranty remains under the same warranty period as the original purchase. If an exchange under warranty is provided within the last 90 days of the warranty period, the exchange includes a full 90 days of warranty coverage.

SBO Ebook: Certification and Interview Questions and Answers

Hi, please permit me to use this forum to introduce you to this ebook titled: [SAP BUSINESS ONE SOLUTION CONSULTANT CERTIFICATION REVIEW AND INTERVIEW: QUESTIONS, ANSWERS AND EXPLANATIONS|http://www.ebookmall.com/ebook/277772-ebook.htm]
This book consists of real life and scenario based review questions and answers on SAP Business One solution certification examinations with Booking Codes/Certification ID: C_TB1200_04, C_TB1200_05 and C_TB1200_07. It covers the SAP Business One Solution Consultant curriculum namely:
 TB 1000 - SAP Business One Logistics
 TB 1100 - SAP Business One Accounting
 TB 1200 - SAP Business One Implementation and Support
The book is targeted at:
 SAP Business One Consultants preparing for the Solution certification exams (C_TB1200_04, C_TB1200_05 and C_TB1200_07)
 SAP Business One Solution Consultant Job Seekers
 SAP Business One Solution Consultant recruiters
 SAP Business One Implementation team
 SAP Business One Project Managers
In this book, you will find:
 SAP Business One Solution Consultant Certification Areas of Concentration (AoC)
 SAP Business One Solution Consultant Certification Curriculum
 Things you must know about the SAP Business One Solution Consultant Certification Examination.
 SAP Business One Certification review questions and detailed answers
 SAP Business One Interview questions and detailed answers
It can be downloaded at http://www.ebookmall.com/ebook/277772-ebook.htm.

Hi Dan,
Thanks for your observation, comment and review.
1. As a matter of fact, since many features of SAP B1 has not changed, just as you asserted, I took cognizance of new enhancements to the solution over the various releases, especially as it relates to the functionalities. By extension however, most questions for prior releases applies to the successor release.
Furthermore, there was a mix-up in the download. Ideally, you should have three sections in the book. Section I (release 2004, by extension - 2005 and 2007 releases); Section II (release 2005, by extension - 2007 release) and Section III (release 2007). The document has been reviewed. Hence, everyone that bought the book before 29th of April 2008 should visit my [blog|http://blogs.ittoolbox.com/sap/kehinde/archives/sap-business-one-solution-consultant-ebook-review-notice-24053] on how to get a copy of the revised version within 24 hours at no extra cost. I regret any inconveniences. PLEASE DO NOT LEAVE YOUR EMAIL ADDRESS ON THIS FORUM.
2. On localization, SAP Business One has more than 10,000 installations across the world. The book is not intended to be "localization specific". It is intended to serve as a certification review for functionalities that cuts across board with a mix of localized functionalities. I am sure you found in there a number of localization questions for other countries like UK. My advice for individuals using the book is to identify which questions apply to their localization.
While I await your review of the [revised version|http://www.ebookmall.com/ebook/277772-ebook.htm] as an SAP Business One advisor, I believe you will agree with me that it is an invaluable resource for preparing for the certification exam and also technical interview sessions.
Thanks

Need Product Costing Interview Questions and Answers

Hi SAP Gurus,
I am looking for the product costing interview questions and answers or just questions which covers all the steps like
1. Product Cost planning, Cost Object controlling, WIP and settling in all the Scenarios (Make to Stock, Make to Order, Repetitive Manufacturing)
2. period end processing Scenario wise
3. Entries made by each step in each scenario.
I have already gone through help.sap.com--> Product Costing and some other forum links but I need with questions and answers which can make me to recall the process and understand the whole process scenario wise completely. Please share with me if you have any documentation.
Thanks.
Harter
Edited by: Harter21 on Jun 25, 2010 6:39 AM

Could some one help me?
Thanks,
-Harter

Organization Management Interview Questions and Answers Extremely Urgent

Hi,
Please let me know Organization Management Interview Questions and Answers. MOST MOST URGENT
Please do not post Link or website name and detail response will be highly appreciated.
Very Respectfully,
Sameer.
SAP HR .

Hi there,
Pl. find herewith the answers of the questions posted on the forum.
1. What are plan versions used for?
Ans : Plan versions are scenarios in which you can create organizational plans.
     In the plan version which you have flagged as the active plan version, you create your current valid organizational plan. This is also the integration plan version which will be used if integration with Personnel Administration is active.
     You use additional plan versions to create additional organizational plans as planning scenarios.
As a rule, a plan version contains one organizational structure, that is, one root organizational unit. It is, however, possible to create more than one root organizational unit, that is more than one organizational structure in a plan version.
For more information on creating plan versions, see the Implementation Guide (IMG), under Personnel Management  Global Settings in Personnel Management  Plan Version Maintenance.
2. What are the basic object types?
Ans. An organization object type has an attribute that refers to an object of the organization management (position, job, user, and so on). The organization object type is linked to a business object type.
Example
The business object type BUS1001 (material) has the organization object type T024L (laboratory) as the attribute that on the other hand has an object of the organization management as the attribute. Thus, a specific material is linked with particular employees using an assigned laboratory.
3. What is the difference between a job and a position?
Ans. Job is not a concrete, it is General holding various task to perform which is generic.(Eg: Manager, General Manager, Executive).
Positions are related to persons and Position is concrete and specific which are occupied by Persons. (Eg: Manager - HR, GM HR, Executive - HR).
4. What is the difference between an organizational unit and a work centre?
Ans. Work Centre : A work center is an organizational unit that represents a suitably-equipped zone where assigned operations can be performed. A zone is a physical location in a site dedicated to a specific function.
Organization Unit : Organizational object (object key O) used to form the basis of an organizational plan. Organizational units are functional units in an enterprise. According to how tasks are divided up within an enterprise, these can be departments, groups or project teams, for example.
Organizational units differ from other units in an enterprise such as personnel areas, company codes, business areas etc. These are used to depict structures (administration or accounting) in the corresponding components.
5. Where can you maintain relationships between objects?
Ans. Infotype 1001 that defines the Relationships between different objects.
There are many types of possible relationships between different objects. Each individual relationship is actually a subtype or category of the Relationships infotype.
Certain relationships can only be assigned to certain objects. That means that when you create relationship infotype records, you must select a relationship that is suitable for the two objects involved. For example, a relationship between two organizational units might not make any sense for a work center and a job.
6. What are the main areas of the Organization and Staffing user interfaces?
Ans. You use the user interface in the Organization and Staffing or Organization and Staffing (Workflow) view to create, display and edit organizational plans.
The user interface is divided into various areas, each of it which fulfills specific functions.
Search Area
Selection Area
Overview Area
Details Area
Together, the search area and the selection area make up the Object Manager.
7. What is Expert Mode used for?
Ans. interface is used to create Org structure. Using Infotypes we can create Objects in Expert mode and we have to use different transactions to create various types of objects. If the company needs to create a huge structure, we will use Simple maintenance, because it is user friendly that is it is easy to create a structure, the system automatically relationship between the objects.
8. Can you create cost centers in Expert Mode?
Ans. Probably not. You create cost center assignments to assign a cost center to an organizational unit, or position.
When you create a cost center assignment, the system creates a relationship record between the organizational unit or position and the cost center. (This is relationship A/B 011.) No assignment percentage record can be entered.
9. Can you assign people to jobs in Expert Mode?
10. Can you use the organizational structure to create a matrix organization?
Ans. By depicting your organizational units and the hierarchical or matrix relationships between them, you model the organizational structure of your enterprise.
This organizational structure is the basis for the creation of an organizational plan, as every position in your enterprise is assigned to an organizational unit. This defines the reporting structure.
11. In general structure maintenance, is it possible to represent the legal entity of organizational units?
12. What is the Object Infotype (1000) used for?
Ans. Infotype that determines the existence of an organizational object.
As soon as you have created an object using this infotype, you can determine additional object characteristics and relationships to other objects using other infotypes.
To create new objects you must:
     Define a validity period for the object
     Provide an abbreviation to represent the object
     Provide a brief description of the object
The validity period you apply to the object automatically limits the validity of any infotype records you append to the object. The validity periods for appended infotype records cannot exceed that of the Object infotype.
The abbreviation assigned to an object in the system renders it easily identifiable. It is helpful to use easily recognizable abbreviations.
You can change abbreviations and descriptions at a later time by editing object infotype records. However, you cannot change an objects validity period in this manner. This must be done using the Delimit function.
You can also delete the objects you create. However, if you delete an object the system erases all record of the object from the database. You should only delete objects if they are not valid at all (for example, if you create an object accidentally)
13. What is the Relationships Infotype (1001) used for?
Ans. Infotype that defines the Relationships between different objects.
You indicate that a employee or user holds a position by creating a relationship infotype record between the position and the employee or user. Relationships between various organizational units form the organizational structure in your enterprise. You identify the tasks that the holder of a position must perform by creating relationship infotype records between individual tasks and a position.
Creating and editing relationship infotype records is an essential part of setting up information in the Organizational Management component. Without relationships, all you have are isolated pieces of information.
You must decide the types of relationship record you require for your organizational structure.
If you work in Infotype Maintenance, you must create relationship records manually. However, if you work in Simple Maintenance and Structural Graphics, the system creates certain relationships automatically.
14. Which status can Infotypes in the Organizational Management component have?
Ans. Once you have created the basic framework of your organizational plan in Simple Maintenance, you can create and maintain all infotypes allowed for individual objects in your organizational plan. These can be the basic object types of Organizational Management organizational unit, position, work center and task. You can also maintain object types, which do not belong to Organizational Management.
15. What is an evaluation path?
Ans. An evaluation path describes a chain of relationships that exists between individual organizational objects in the organizational plan.
Evaluation paths are used in connection with the definition of roles and views.
The evaluation path O-S-P describes the relationship chain Organizational unit > Position > Employee.
Evaluation paths are used to select other objects from one particular organizational object. The system evaluates the organizational plan along the evaluation path.
Starting from an organizational unit, evaluation path O-S-P is used to establish all persons who belong to this organizational unit or subordinate organizational units via their positions.
16. What is Managers Desktop used for?
Ans. Manager's Desktop assists in the performance of administrative and organizational management tasks. In addition to functions in Personnel Management, Manager's Desktop also covers other application components like Controlling, where it supports manual planning or the information system for cost centers.
17. Is it possible to set up new evaluation paths in Customizing?
Ans. You can use the evaluation paths available or define your own. Before creating new evaluation paths, check the evaluation paths available as standard.
18. Which situations require new evaluation paths?
Ans. When using an evaluation path in a view, you should consider the following:
Define the evaluation path in such a manner that the relationship chain always starts from a user (object type US in Organizational Management) and ends at an organizational unit, a position or a user.
When defining the evaluation path, use the Skip indicator in order not to overload the result of the evaluation.
19. How do you set up integration between Personnel Administration and Organizational Management?
Ans. Integration between the Organizational Management and Personnel Administration components enables you to,
Use data from one component in the other
Keep data in the two components consistent
Basically its relationship between person and position.
Objects in the integration plan version in the Organizational Management component must also be contained in the following Personnel Administration tables:
Tables                    Objects
T528B and T528T     Positions
T513S and T513     Jobs
T527X                    Organizational units
If integration is active and you create or delete these objects in Organizational Management transactions, the system also creates or deletes the corresponding entries automatically in the tables mentioned above. Entries that were created automatically are indicated by a "P". You cannot change or delete them manually. Entries you create manually cannot have the "P" indicator (the entry cannot be maintained manually).
You can transfer either the long or the short texts of Organizational Management objects to the Personnel Administration tables. You do this in the Implementation Guide under Organizational Management -> Integration -> Integration with Personnel Administration -> Set Up Integration with Personnel Administration. If you change these control entries at a later date, you must also change the relevant table texts. To do that you use the report RHINTE10 (Prepare Integration (OM with PA)).
When you activate integration for the first time, you must ensure that the Personnel Administration and the Organizational Management databases are consistent. To do this, you use the reports:
        RHINTE00 (Adopt organizational assignment (PA to PD))
        RHINTE10 (Prepare Integration (PD to PA))
        RHINTE20 (Check Program Integration PA - PD)
        RHINTE30 (Create Batch Input Folder for Infotype 0001)
The following table entries are also required:
        PLOGI PRELI in Customizing for Organizational Management (under Set Up Integration with Personnel Administration). This entry defines the standard position number.
        INTE in table T77FC
        INTE_PS, INTE_OSP, INTEBACK, INTECHEK and INTEGRAT in Customizing under Global Settings ® Maintain Evaluation Paths.
These table entries are included in the SAP standard system. You must not change them.
Since integration enables you to create relationships between persons and positions (A/B 008), you may be required to include appropriate entries to control the validation of these relationships. You make the necessary settings for this check in Customizing under Global Settings ® Maintain Relationships.
Sincerely,
Devang Nandha
"Together, Transform Business Process by leveraging Information Technology to Grow and Excel in Business".

Fico interview questions and Real time tickets with resoving details

MODERATOR: Do not post (or request) email address or links to copyrighted or confidential information on these forums. If you do, the thread will be LOCKED and all points UNASSIGNED.
hi sap gurus
i have done sap-fico iam in job trails. can any body help me Fico interview questions and Real time tickets with resoving details
regards
prasad.v
Edited by: chinna prasad on Jun 5, 2008 4:10 PM

Hello Prasad,
Before attending interviews.....First you need to understand general things like CV writing, projects, sub modules etc., you should be gain knowledge on these concepts then you can move further.
1. CV 2.Projects 3.your strenths in sap (reading..reading...reading....practice...practice...practice)
2.you please interact with your friends who is on trails, then you can get more information like interview process, methodology, technical etc.,
I am sending some real time interview tech questions which will useful for you.
Questions:
1.When tickets are raised by end users who will give priority? After resolve the tickets who will close the status?
2.In real time at a time how many normal periods, special periods, MM periods we can open?
3.What is client dependant & Independent?
4.How to transport configuration settings from one client to another client or production client, which tools we can use for transport?
5.Why we donu2019t assign business area to company code?
6.What is the difference between General GL A/c, Control A/c, Reconciliation A/c & Offsetting A/c?
Answers:
1.The priority is generally decided by the Coordinator on the client side. After tickets are resolved, they will have to be closed by the coordinator on the customer site
2. In FI as many as you wants. In MM only 2 (current month + previous
3.Certain tables and customizations made in one client will affect the other clients also - then it is cross client i.e, client dependent. While if the changes made in one client has no impact on the other client - it is said to be client independent
4.Transports from one server to the other can be made with the help of transport requests. When a configuration is done the system generates a request number. First release the task and then release the request. Use TC-SE10 / SE09, SE09: workbench transport; SE10: customizing transport. But currently no such difference actually exists.
5.because in case of multiple company codes, same business area can be used across company codes. Business area is cross company code, means it is not confined to one company code thatu2019s why we don't assign BA to any of the company codes. It is client dependant, not company code dependant. We can pass values from one company code to any of the BA in that client.
6.General GL Account are those used for standard posting like for example Income and Expenses Accounts
- Control Account are basically used for reconciliation between modules like FI and CO, to ensure that both the modules are in sync.
- Reconciliation Account are those specific covering ADK (A-Assets, D-Customer, K-Vendor). For example a Customer Master would be mapped to a Bills Receivable Reconciliation Account and any transaction that needs to be posted are done against the customer code.
- Offsetting Account are used for variety of reasons and few examples are Intercompany Postings, at the time of Implementation when TB and Balance sheet are uploaded would be offsetted against a dummy account.
All the best.....dont forget and pl assign points if useful and if u have any querries pl revert back
thanks
Anil

HT1918 I forget my apple Id secure question, and I can't reset it , what am I supposed to do ? Please help .....help

I forget my apple Id secure question, and I can't reset it , what am I supposed to do ? Please help .....help

1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"... i do this but not working

Oracle Apps Objective question and answers

Hi all,
We need Oracle Apps(DBA, Tech & Funct) objective type questions with answer.
Can you any one help to find the questions. Even if they are any links, dumps, doc please post them.
Thanks,
Ramaraju.

HI Ramaraju,
You can search for FAQ related to topics like adpatch, cloning etc etc
Google should be your friend
for DBA check this out its the best book
Cracking the Oracle Apps DBA Interview: 325 Frequently Asked Questions – June 12, 2009
by Joyjeet Banerjee (Author)
for technical
http://oracleappstech12.blogspot.com/2012/08/oracle-apps-technical-interview.html
Oracle Apps Technical Interview Questions, Answers for Freshers and Experienced asked in Job Interviews
http://oracleapps4u.blogspot.com/2011/07/oracle-apps-interview-questions-and.html
etc etc
well for functional it depends on the module
I'm not aware of any dump which covers all (administration, technical and functional ) of them so you need to Google as per the module for functional
ApPsMaStI
sharing is Caring

WTC Questions and Answers

Here are some common WTC questions and answers:
Q1: What is the transaction story for WTC between WLS and Tuxedo and how
does it differ from Jolt?
A1: In version 1.0 of WTC transactions may be started in WLS and will
"infect" Tuxedo with the same transaction. That implies that there is one
and only one commit coordinator, and that is in WLS. In version 1.0 of WTC
transactions originating
in Tuxedo via WTC is not supported. In version 1.1 of WTC transactions from
Tuxedo into WLS via WTC can be used, but only in Beta mode, as we will not
have done the required QA of "inbound" transactions. In order to use
inbound transactions in WTC 1.1 you will need to turn on the use of beta
features with an attribute called "UseBetaFeatures" on the WTC Startup class
in WLS.
This differs from Jolt in that while Jolt can start transactions in Tuxedo,
these transactions are not coordinated with anything in WLS. Hence it is
impossible to do a 2 phase commit which involves WLS resources and Tuxedo
resources with Jolt. Since Jolt does not have any means of invoking WLS
services transactions in that direction do not make sense.
Q2. How does the security mapping work?
A2: WLS and Tuxedo can share the same set of users (though they may be
administered differently in the two systems) and the users can propagate
their credentials from one system to the other. For example, if John Wells
logs into WLS then the services which he invokes in Tuxedo will have all of
the ACL permissions of John Wells as defined on the Tuxedo side.
Furthermore, if Jolene User logs into Tuxedo then any resources she attempts
to access in WLS via WTC will be checked against Jolene User's rights in WLS
land.
In order to accomplish this, a few things need to be set up:
1. You must be using Tuxedo 7.1 or Tuxedo 8.0 for this to work. Tuxedo 6.5
did not have the security infrastructure necessary to make this happen.
2. In your BDMCONFIG on the Tuxedo side you will need to set ACL_POLICY and
CREDENTIAL_POLICY to "GLOBAL" for the WLS remote domain. ACL_POLICY
controls whether or not a domain accepts credentials coming from a remote
domain and CREDENTIAL_POLICY controls whether or not we send credentials to
a remote domain. (In Tuxedo 7.1 there was no CREDENTIAL_POLICY - we always
sent the credentials to the remote domain).
3. In your BDMCONFIG on the WLS side you must likewise specify <ACL_POLICY>
and <CREDENTIAL_POLICY> to be "GLOBAL."
4. On the WLS side you must also configure a <TpUsrFile> which will point
to a file of the exact same format as the tpusr file generated by the
various Tuxedo commands to add and delete users. (Which also happens to be
of the same format as the unix /etc/passwd file). WTC needs this file
because in WLS users do not have user identification numbers or group
identification numbers. Hence we need a way to map WLS users into the
standard Tuxedo UID/GID appkey.
Voila! You have now set up your system such that users logged into either
system can be given access privelidges in the other system. This is known
as single sign-on. We are currently working on a way to better integrate
the two user databases between WLS and Tuxedo, and one day we will have
single administration and single-sign on!
Q3: How is the performance of WTC?
A3: Obviously, results will vary based on your machine, CPU, application
(i.e., transactions/no transactions) etc...
However, in the performance lab here we have seen WTC perform at levels that
nearly equal Tuxedo in a similar configuration. The performance is equal to
or better than Jolt, and will scale much better than Jolt because of the
concentration of network bandwidth.
Q4: What fail-over/fail-back mechanisms are there in WTC?
A4: WTC has many of the same fail-over fail-back mechanisms which /T
domains had. Any service can be offered by multiple remote domains, and if
a domain link is down we will attempt all of the backup domains. In /T
domains there was a limit of three backup remote domains, but in WTC there
is no limit to the number of backup domains you can configure for a service.
Furthermore, we support the connection policies of ON_STARTUP, ON_DEMAND and
INCOMING_ONLY. If the policy is ON_STARTUP then you can also configure a
retry interval and max-retries. We will attempt to connect to ON_STARTUP
remote domains every retry interval for a maximum number of retries before
giving up. If a domain is configured as ON_STARTUP or INCOMING_ONLY and the
connection is not currently established then no services will be routed to
that remote domain.
Q5: What support features are available in WTC?
A5: WTC has a tracing feature which can be enabled dynamically. If a
customer reports a problem, support will likely ask the customer to turn
tracing on and send a log file. This tracing facility has several levels of
severity and can also help debug WTC applications. It is turned on by
setting TraceLevel in the WTC startup class. The following are the defined
levels:
10000 - TBRIDGE Input/Output
15000 - TBRIDGE extra information
20000 - Gateway Input/Output (this will trace the ATMI verbs)
25000 - Gateway extra information
50000 - JATMI Input/Output (this will trace the low-level jatmi calls)
55000 - JATMI extra information
60000 - CORBA Input/Output (this will trace CORBA calls)
65000 - CORBA extra information
Q6: Will Jolt be deprecated?
A6: No. There are some features of Jolt that are not covered by WTC. For
example, the Jolt registry API are not supported by WTC. Furthermore WTC
must run in conjunction with WLS, while Jolt can be run from Applets or from
free-standing Java applications.
Q7: What about JCA? Is WTC a JCA adapter?
A7: WTC is not a JCA adapter. JCA does not define semantics for inbound
invokations into the JCA container, but WTC allows for Tuxedo clients to
invoke WLS EJBs. However, the jATMI object interactions are based on the
JCA client model. BEA is currently evaluating several JCA strategies for
connections into Tuxedo.
John Wells (Aziz)
[email protected]
[email protected]

Q8. What versions of Tuxedo are supported?
A8. WTC 1.0 will support Tuxedo 6.5 and Tuxedo 8.0. WTC 1.1 (which adds
CORBA support) will support Tuxedo 6.5 and Tuxedo 8.0. Soon after the
release of both of these products we will certify WTC with Tuxedo 7.1.
However, the version of Tuxedo 7.1 you will need to have will be Tuxedo 7.1
after a certain patch level, which I don't know the number of yet. I will
attempt to keep the public informed about which patch level will be required
in Tuxedo 7.1
Q9. What WLS Releases will be supported?
A9. WTC 1.0 will be certified on WLS 6.0 SP2, WTC 1.1 will be bundled with
WLS SilverSword release (6.1?)
Q10. How will WTC be packaged?
A10. WTC 1.0 will be a separately downloaded binary (one for unix, one for
NT) that the user will have to install and configure in his/her WLS
environment. (Configuration will consist of putting the jatmi.jar file into
the classpath (as well as the normal BDMCONFIG configuration, of course)).
WTC 1.1 will be bundled right in there with the WLS SilverSword release.
Q11. When will WTC go live (no more beta)?
A11. This is a question for Jeff Cutler, but my impression is that WTC 1.0
will be shipped in the same time-frame as the Tuxedo 8.0 release and
obviously (see A10) WTC 1.1 will be shipped with WLS SilverSword.
John Wells (Aziz)
[email protected]

My 3GS keeps switching between iPhone speaker and Dock connector and I don't know how to keep it on iPhone speaker

My 3GS keeps switching between iPhone speaker and Dock connector and I don't know how to keep it on iPhone speaker so I can listen to my music and games. Is it hardware or software problem?

I was told by a friend that sometimes when you use a 3rd party charger that the connectors are not the same size and so it can affect the sensors in the phone and make it seem like it is in a docking station and so changes the output for dock speakers. With that said, I didn't take my pohone in to be serviced at the appple store because it was a 3GS and over 2 years old and so not covered by any service plan. Since then my phone is back to normal and I can use my headphones and listen with the speakers on the phone. I stoped using the suspected cheap 3rd party charger and maybe that's what did it, but not sure if it was or wasn't the cause of my problem. I'm glad that my phone is better I was kinda holding out for the Iphone 5 when i comes out later and hope my phone lasted until then.

Choosing between dock connector and speaker?

In my car, I have an FM transmitter / charger. There are times I want to charge my phone but not have all audio go to the FM trasmitter, but rather to come through the iPhone speaker. Is there a way to do this? I was able to do it once using the AirPlay icon on the multitasking bar, but it no longer shows up.

I was told by a friend that sometimes when you use a 3rd party charger that the connectors are not the same size and so it can affect the sensors in the phone and make it seem like it is in a docking station and so changes the output for dock speakers. With that said, I didn't take my pohone in to be serviced at the appple store because it was a 3GS and over 2 years old and so not covered by any service plan. Since then my phone is back to normal and I can use my headphones and listen with the speakers on the phone. I stoped using the suspected cheap 3rd party charger and maybe that's what did it, but not sure if it was or wasn't the cause of my problem. I'm glad that my phone is better I was kinda holding out for the Iphone 5 when i comes out later and hope my phone lasted until then.

X61 dock station and Linux

I have a Thinkpad X61. I bought it without a dock station and I never needed one. Now I need and I want to buy one. It will probably be second hand but that doesn't matter
I want to know if someone used a docking station with Linux distro (Ubuntu or Fedora pref.) I have concerns about network issues.
Thanks.

I can't specifically give you any guarantees about X61, but I've used several Thinkpads with docking stations under Linux, and so have my colleagues at work, and I've never heard about any problems.
I love docking stations and I think they are well worth it if you can find one cheap. eBay in the US seems to be full of them, though shipping to Bulgaria might be a different matter...
As to your hard drive question, the following link should tell you all you need to know:
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-62432

I sat on my iPod and on the side the metal is off the iPod and nearly covering the volume controls what do I do? (3 gen iPod touch)

I sat on my iPod and on the side the metal is off the iPod and nearly covering the volume controls what do I do? (3 gen iPod touch)

You might want to repost, now that you have marked your question answered you may not get many people looking at it.

Dock Question Mark Icons

I've set up a brand-new Mac Pro tower as a master machine for the purpose of cloning it to other Intel-based Macs in various labs on campus. I've ironed out all the bugs on the master, and it's working exactly as we want it to.
I'm using Mike Bombich's NetRestore 3.3.6 to capture an image from the Mac Pro system. The capture and restore to various Intel iMacs works fine. However, the restored systems don't behave perfectly like on the master machine.
When a new user logs in via LDAP authentication on the iMacs, the dock shows up with lots of question mark icons. However, if that same user logs in the same way on the Mac Pro, everything shows up just as it should.
What would cause this behavior, assuming a perfect clone? Is there a simple solution?

I've confirmed that the _CFURLAliasData strings were the culprits in my case. I took ~/Library/Preferences/com.apple.dock.plist and opened it up with the Property List Editor (part of the Xcode tools). Anywhere I found _CFURLAliasData, I deleted that data entry, and saved it.
Since I'm in a lab environment, I needed it in the User Template, so a +sudo cp ~/Library/Preferences/com.apple.dock.plist /System/Library/User Template/English.lproj/Library/Preferences+ did the trick (and I made a new image off of that). After that, any LDAP/AD authenticated user that logged on was greeted to a nice dock full of icons, not question marks.
I posted about it here (http://benkreeger.com/blog/2007/09/mac-os-x-10410-breaks-dock-app.html), and that might give more insight (and a few screenshots, too).

Dock question and earbud covers

Similar Messages

Maybe you are looking for