Dock station compatible with new nano with multi-touch

Does anybody knows if JBL OnStage IIIP Speakers are compatible with the new iPod nano with multi-touch?
Thanks.

I don't think you understand the problem then. When pressing 'menu/back' on the remote it goes back to the Album list, but there's nothing 'highlighted' and hence no way to switch between different Albums.
I'm guessing it's because it doesn't make sense to have navigation highlighting on a touch only device.
It does, however, work on the iPhone 3gs (and all other ipods I've tried), which is why I'm hoping for an update from apple that would fix this. I don't see why they'd purposely make previous ipod docks incompatible with the new nano... then again, it's Apple.
There's a bunch of software issues with the new nano, so I guess they'll have their hands full with more important problems for the time being.
I don't see how JBL could fix this.

Similar Messages

Ipad2 docking station compatible with iPad3

Is the iPad2 docking station compatible with the iPad3?

Yes
http://store.apple.com/us/product/MC940ZM/A

Can i charge my new nano with old adapter

can i charge the new nano with a old ipod nano power adapter?

thank you, is it possible to use any usb outlet charger for the nano not just made by apple, from what i heard some works but some people's ipod got fried idk
It's hard to tell for certain, but if you are going to use a third party USB AC Charger, I would check for different reviews online for whether or not they are compatible with your iPod. Just double check for input and output voltages it works with and compare it to those that your iPod Nano can handle.
B-rock

EN488AA docking station compatible with Elitebook 6930p?

I have an Elitebook 6930p laptop at work that uses a KP080AA docking station.
I bought another 6930p laptop for home and I have an EN488AA docking station that looks idential to the KP080AA docking station but my 6930p laptop is not listed as being compatible with the EN488AA docking station (although it does plug into it ok). Perhaps the EN488AA doking station is just an older version of the KP080AA docking station?
Can anyone tell me ifthe 6930p will work in the EN488AA docking station? I don't want to harmmy new laptop by just rying it out..
Thanks!

I actually found the answer myself in the small business HW forum of this HP website.
In that post, it said that the EN488AA docking station IS compatibale with the Elitebook 6930p laptop.
I have since plugged my 6930p laptop into the EN488AA docking station with no damage done that I noticed.
The only issue I have is that when I swap the laptop into the docking staion, the display resolution seems to get screwed up on the external monitor. The desktop is bigger than the physical screen so some icons can't be seen. I haven't had time to investigate that yet. I am sure there is a setting I need to adjust somewhere for that.
Gary

Docking station compatible with Otterbox defender case??

Realized after I bought Otterbox protector yesterday that it doesn't fit my docking station with it on....... Mine is a front docking station so it simply is too bulky to fit with the otterbox on. Would a top docker fit or will it still be too bulky on the bottom to connect?

Or if you really didn't want to spend that type of money @ Radioshack, just pick up one of these from eBay:
http://cgi.ebay.com/NEW-3-3ft-3-5mm-4pole-Audio-headphone-Extension-Cable-/17057 1531071?pt=LHDefaultDomain_0&hash=item27b6db033f#ht_507wt1139

T450s docking station and 3 monitors simultaneously with one 4K@60hz ?

Hi,
I left my job for a new one and I am looking for a replacement of my very good old X220 which was paid by my previous company.
Currently, my X220 drives, under Linux, 4 FHD monitors through eGPU (DIY with a 5870 Eyefinity 6) with 16GB RAM.
I intend to buy the new T450s, but I can't find any reviews or posts about the multi-monitor support of this notebook and nothing more through a docking station.
So, can anybody tell me if the T450s can drive this kind of configuration simultaneously:
- 1x Philips bdm4065uc (4K@60hz) through DP 1.2
- 2x DELL U241M (1920x1200) through the others ports (DP or DVI or VGA)
Which docking station can achive this ? I think I need to go with an ultra model with 170W, but not sure if even this highest model can achieve this.
Many thanks for your answers,
Regards,
Lenovo X220 4287-CTO / Intel Core i7 2640M @ 2.8 / Corsair Vengeance 16 Go@1866 MHz CL10 / Samsung SSD 840 PRO 512 Go / Bios 1.38 / Linux Xubuntu 14.04LTS / eGPU ATI Radeon 5870 Eyefinity 6 / 2x DELL U2142M / 2x DELL U2212HM

The initial question was not if you can run 3 external screens but if you can run 2 external + laptop screen at the same time
With Matrox extenders you can run up to 6 depending on you screens (max resolution is limited). Btw it's DualHead not DoubleHead
Rgds,
Ahti

Can you use new Nano with iTunes 6?

I'd like to get the new iPod Nano, but I have Mac OS 10.2.8, so I can't get iTunes 7. It says on the system requirements that I need 7, but is it really necessary? (i.e. is it possible to use the new iPod Nano with iTunes 6?)

Welcome to Apple Discussions!
While I haven't tried, I would image the answer is no.
Usually when iPods are released with a new iTunes version, they aren't made to be/are made not to be compatible with previous iTunes versions.
It may work, but I can't be sure either way (someone else may have tested this).
In the past, even if iTunes updated the iPod, there tended to be problems syncing.
btabz

Trying to use new nano with old mac

Hi, I was wondering if someone could give me some advice.
I recently received an ipod nano as a gift. Unfortunately, my ibook is from 2001, and i am still running the original OS 10.
From what I have read in these discussion forums, it would probably not be wise for me to try to install OS 10.4 on my computer. However, I believe that OS 10.4 is needed for my computer to be compatible to my nano.
I have hundreds of songs on my ibook, which I would really like to transfer to my new ipod. What can I do?
thanx
ibook Mac OS X (10.0.x)

Apple's minimum specs for the Nano are 10.3.x basically because that was the first version of the MacOS to support USB 2. However, many people, including my wife, are using a Nano with computers that have USB 1. So the real limiting factor is what version of the OS your computer can comfortably run. I wouldn't recommend 10.4 but 10.3 is certainly doable. I know several people running around with the colored iBooks running 10.3. And certainly 10.2 is doable though I don't know if iTunes 6 will run on Jaguar.

3rd party earbuds/phones not working with new Nano

So, I've got a new Nano ( a couple months old at this point ), and the earbuds that came with it got accidently trashed.
No worries, because I've got several other sets of earbuds / headphones kicking around.
The problem is that with all of them, the sound keeps cutting out / playback stops. I'm fairly certain that this is the iPod detecting "no headphones" and stopping playback.
It happens whenever the plug flexes; it's as if the jack briefly loses contact with the internal connectors.
Since I usually keep my iPod in my pocket, this happens quite often.
I don't know whether the new Apple earbuds (with volume control/mic) would react the same way; I won't buy them, because I can't have them at work (anything with a microphone is banned).
Anyone have thoughts / help?
Thanks!

Ok, more follow-up.
Roommate had a pair of iPod buds that he'd never used, and let me have them.
There are marked differences between the iPod 3.5 mm jack and a "standard" 3.5 mm jack.
The standard 3.5 mm jack has three sections, tip, middle, and call it 'core'.
The iPod jack has 4 sections, tip, middle, core 1 and core 2.
The seperator for each of the common sections (tip to middle/middle to core(core1)) are at the same place.
I suspect that the "core 2" is how the the iPod/iPad/iPhone uses the microphone.
No big deal, except I can't have a microphone, at all, period, at work. Absolutely forbidden (if I want to keep my job).
Breaking out the micrometer (yes, I own a micrometer), it looks as though the iPod jack is a lot closer to the 3.5mm tolerance, than the standard one, which may be the issue. That is, the core1/core2 sections are 3.5mm exactly, whereas the 3rd party jack is 3.46mm. I wouldn't think that would make enough of a difference, but apparently it does.
So, I'm back to my starting point:
Is there an "approved for iPod" set of headphones that doesn't have a microphone built in?

Error Message working with new Nano and iTunes

Posts: 15
From: Petaluma Ca
Registered: Aug 29, 2004
Unlock iTunes / get write permission
Posted: Dec 26, 2006 6:02 PM
Reply Email
Wanted to upload some songs from my iTunes Library to new Nano.
Hooked it up, went through the promps, choose two playlists to load, and before we could say oops, we saw that it was infact loading the entire library. We had no way of stopping the process so we unplugged it.
Now when I try to open iTunes it I get an error message :"The iTunes Library file is locked, on a locked disk, or you do not have write permission for this file."
I verified permissions and repaired them. No luck.
Help! Please!

i'm assuming the Error code HRESULT: 0x800763b3 means something and is the solution but where can i find the answer or am i going about this all wrong?
Yeah, this 0x800763b3 is a slightly unusual one. Normally with these, the iTunes install error code matches the error codes that people get on their Windows Update failures. But for the last two 0x800763b3s I've been involved in on an iTunes install (Liv and someone else), the 0x800763b3 on the iTunes install has been associated with an 0x8007000b on the Windows Update failures. (Liv's 643s were pretty much "generic" error message codes for Windows Update failures, which could mean anything. So that's why I/we went after the 0x8007000b, which has some Microsoft documentation on fixes.)
Doublechecking on other symptoms of your situation ... is your Windows Update not opening at all when you try to launch it?
If so, when you click "Turn Windows features on or off" in the "Programs and Features Control Panel" item, is the Windows Features dialog box empty? (No features are shown?)
(If we can't get the codes from the windows update failures, we might be able to make some progress if we can identify other symptoms that you're getting. I know some documentation for some of these codes that mentions the Windows Features thing as a possible additional symptom.)

New Nano with existing itunes account

I lost my Nano and just bought a new one. Is there anything special I need to do to make sure my ipod syncs with existing itunes? Can I just plug the usb connector into my desktop and it will download all my music on itunes onto my new Nano? Any help is appreciated.

Yes, just plug it in.
It will go thru the registration and then sync everything.

Can I use my new nano with old itunes??

Can i use the old itunes with my new nano???? Because the new ituns want dl and I cant get help no where, this *****!!! I guess I bought a $200 turd!!!!!! I guess I should just go buy a walk man, I dont need a pc for that.....yet!!!!!!

You need iTunes 7.
Download it here -> http://www.apple.com/ipod/start/

Cannot drag files to mail dock icon to compose new message with attachment

Hello,
I can no longer drag images or files to the dock icon to open a compose message window with the attachment. I drag the file and nothing happens.
I first noticed using skitch. Then I tried both a jpg and word .docx from finder and neither worked. I then tried dragging to other applications like photoshop and that worked fine. So it seems to be isolated to mail.app
I tried repairing my permissions and that didn't fix the problem.
I am using the latest version of Snow Leopard, 10.6.2
Lori

Alright well the problem is back and I did some further testing.
It works when mail.app is not already open, I can drag images or any type of file to mail, mail will open and create a new message with the attachment.
IF mail is already open, the only thing I've been able to drag are links from safari, images or files no longer work.
Lori

Itunes problems with new nano, purchased songs

Hello all. I am having a few problems with my itunes and newly purchased nano that hopefully you guys can give me some advice on. First of all, when i plug in my nano, it does not recognize it unless i close itunes and reopen it. Then, it takes a few minutes to open and acts like it is a new nano every time i open it. Meaning, it asks me to name the nano and asks me to apply all the settings etc. After that it works. I then can eject it. If I then re open itunes, with my nano not plugged in, itunes thinks that my nano is plugged in and says its corrupted. If i attempt to do anything in itunes, it freezes up.
In an unrelated problem, i am forced to authorize my computer to play my purchased songs every time i open itunes. It never remembers when I authorize it.
Thanks in advance for your help i definitely appreciate it!

OK, could not resist. I did go ahead and put my old run history back into the new & now restored Nano. No problems. Everything is fine. (Be remember, this is not something that is supported or approved by Apple or Nike.)
There may be no connection between adding the old run data files to the new Nano and the sound & freezing problems. Others have already complained about those.
However, what I will say is that you should never mess around with the Nike+ xml "Preferences" file or the "Best" file. These are invisible for a reason. You can put your old xml run data files into your "latest" folder and thus get them on your new Nano, but you CANNOT change your Totals on your new Nano no matter what you muck around with. However, if you try it and things go wrong, doing a "restore" should save the day.
And it should save the day for sound problems and recurring Nano freezes unless you have a defective Nano.

Probs with new nano

Brand new nano wont let me get into 'music'. Every time I click centre button to get into music menu, it gives me black screen and then the apple icon.
I can however get into 'photos', 'extras', etc without probs. It only happens with 'music'.
Any hints???
JohnC

Detailed problem..
I pod Nano will not come out of Language choice menu screen.
Hold switch is not on.
Tried the 5 r's.
Tried all reset codes.
Tried all restore procedures.
Uninstalled and reinstalled all software on computer twice.
Tried different wire.
Tried different computer.
Tried letting battery drain down.
None of these have any effect.
I see other users with this issue but no fixes?
gateway Windows XP
gateway Windows XP

Dock station compatible with new nano with multi-touch

Similar Messages

Maybe you are looking for